home *** CD-ROM | disk | FTP | other *** search
/ IBM Presents OS/2 Software Hits 1995 / OS-2_SW_HITS_2ND_EDITION_1995.ISO / i17 / us7050b1.dsk / 7050WIN.RME next >
Text File  |  1994-10-03  |  54KB  |  1,764 lines

  1.  
  2.  
  3.                       IBM LAN Distance for MS Windows
  4.                          ServicePak IP07050 README
  5.                       ===============================
  6.  
  7. 1.0 - INTRODUCTION
  8. ==================
  9. This file provides descriptions and installation instructions for the changes
  10. to version 1.1 of IBM LAN Distance Remote for Windows product.  Information
  11. on changes to the IBM LAN Distance for OS/2 products can be found in the
  12. IP07050.INF file also located on diskette 1 of this ServicePak.
  13.  
  14. A simple BAT file (IP07050.BAT) is provided to install the product changes in
  15. this ServicePak.  IP07050.BAT will replace modified files in the LAN Distance
  16. directory and add new files as appropriate.
  17.  
  18. 1.1 - Trademarks
  19.  
  20. The following are trademarks of IBM Corporation:
  21.  
  22.  DCAF
  23.  IBM
  24.  LAN Distance
  25.  LAN Support Program
  26.  LANStreamer
  27.  Operating System/2
  28.  OS/2
  29.  PC LAN Program
  30.  Presentation Manager
  31.  Win-OS/2
  32.  
  33. The following are trademarks of other Corporations:
  34.  AttachMate (AttachMate Corporation)
  35.  Chameleon (NetManage)
  36.  LAN Workplace for DOS (Novell, Inc.)
  37.  Microcom  (Microcom, Inc.)
  38.  Microsoft (Microsoft Corporation)
  39.  MSNET (Microsoft Corporation)
  40.  NetWare (Novell, Inc.)
  41.  Pentium (Intel Corporation)
  42.  Ungermann-Bass (Ungermann-Bass, Inc.)
  43.  VINES   (Banyan Systems, Inc.)
  44.  Windows (Microsoft Corporation)
  45.  Windows for Workgroups  (Microsoft Corporation)
  46.  
  47.  
  48. 2.0 - INSTALLATION
  49. ==================
  50. The following steps should be used to apply the ServicePak changes to the LAN
  51. Distance Remote for Windows version 1.1:
  52.  
  53.       1. Stop LAN Distance.
  54.  
  55.       2. Ensure that Windows is before DOS in the PATH statement.
  56.  
  57.       3. If Windows for Workgroup is on the system, change to the Windows
  58.          directory and copy ini files as indicated below.  This step is 
  59.          necessary for the Shuttle feature to work properly.
  60.  
  61.             Copy PROTOCOL.INI PROTOCOL.LAN
  62.             Copy SYSTEM.INI SYSTEM.LAN
  63.  
  64.       4. Install LAN Distance Remote for Windows changes from this ServicePak
  65.          by entering the following MS Windows RUN command with diskette #1 of 
  66.          this ServicePak in the A drive:
  67.  
  68.          A:\IP07050 d:\path       where d:\path is the drive and path where
  69.                                    the LAN DISTANCE REMOTE version 1.1 product
  70.                                    files are located.
  71.          example:
  72.          If the LAN DISTANCE REMOTE product was installed on the D: drive in
  73.          the WAL subdirectory, type:         A:\IP07050 D:\WAL.
  74.  
  75.          IF servicing a DOS/Windows client using 5.25 inch diskette media, then
  76.          complete the following additional step(s):  
  77.            - Insert 5.25 inch ServicePak diskette #2 
  78.            - Run IP07050.BAT again (to install the second half of the 
  79.              LDW files.)
  80.  
  81.       5. Exit and restart the workstation. (Ignore ANDIS PPAT and VMAC error
  82.          messages displayed during reboot.)
  83.  
  84.       6. Start the LAN Distance product by double-clicking on the LAN Distance
  85.          icon.
  86.  
  87.       7. Open the Settings notebook by selecting the Settings object in the
  88.          LAN Distance container.
  89.  
  90.       8. Access the Save changes popup by closing the Settings notebook.
  91.          To close the Settings notebook double-click on the system menu
  92.          symbol located in the upper-left corner of the Settings notebook.
  93.  
  94.       9. Select Yes to save default changes to the Settings notebook.
  95.  
  96.      10. Stop the LAN Distance product.
  97.  
  98.      11. Exit and restart the workstation.
  99.  
  100.      12. Rerun any DOS memory optimizer previously used.
  101.  
  102.      13. On a Windows for Workgroup system after LAN Distance is successfully 
  103.          started, copy protocol.ini, system.ini, config.sys, and autoexec.bat
  104.          to their respective .rws files in the appropriate directories for 
  105.          later use by the Shuttle feature.  
  106.  
  107.          Change to the Windows directory and copy files as follows:
  108.  
  109.              COPY PROTOCOL.INI PROTOCOL.RWS
  110.              COPY SYSTEM.INI SYSTEM.RWS
  111.  
  112.          Change to the root directory of the boot drive and copy files as
  113.          follows:
  114.  
  115.              COPY CONFIG.SYS CONFIG.RWS
  116.              COPY AUTOEXEC.BAT AUTOEXEC.RWS
  117.  
  118. 3.0 - PUBLICATION ADDENDUM
  119. ==========================
  120.  
  121. 3.1 - Message WCL0589
  122.  
  123.    This message may indicate that your modem is not configured properly.
  124.    If you created a new PIF file (modem type) for your modem, make sure
  125.    the AT commands in its initialization string are set for the
  126.    configuration requirements described in the LAN Distance Advanced Guide.
  127.    See Appendix D, section "Creating a New PIF File for a Modem Not in the
  128.    List", step 8.
  129.  
  130.    The following should also be listed under step 8:
  131.  
  132.       VERBOSE RESPONSE MODE
  133.       Modems display responses or result codes to accept or reject
  134.       commands.  Result codes are also sent to report on connection
  135.       progress.  Most modems are defaulted to report result codes as
  136.       words, instead of numbers.  Make sure your modem is set to report
  137.       responses as words (verbose response mode).  (For most modems, this
  138.       command is V1.)
  139.  
  140.    Use the CFMODEM utility to test modems and strings.  The Windows version
  141.    of this utility is provided and is installed to your WAL directory when
  142.    LAN Distance is installed.  The description of the OS/2 CFMODEM utility
  143.    provided in Appendix D of the LAN Distance Advanced Guide should be used
  144.    as a guide for using the Windows version of the CFMODEM utility.  To run
  145.    the Windows Port/Modem utility, select the Windows RUN option and type
  146.    "CFMODEM.EXE".
  147.  
  148.  
  149. 3.2 - Upgrading the Remote Workstation
  150.  
  151.    Before upgrading or servicing a MS Windows LAN Distance Remote workstation,
  152.    make sure the workstation is shuttled to a Remote workstation, not a LAN
  153.    workstation.
  154.  
  155.  
  156. 4.0 - FIXES
  157. ===========
  158.  
  159. 4.1 - Fixed APARS
  160.  
  161.    The following APARs are fixed in this ServicePak:
  162.  
  163.       IC07457 - WINDOWS LD Remote gets a Black Screen and Hangs when Connection
  164.                 Server does Not Have Filtering.  (DOSVMAC fixes)
  165.  
  166.          Windows remote workstations received a blank screen, hang, or exit
  167.          to DOS when connecting to a LAN Distance connection server.  This
  168.          problem occurred more frequently when there was not sufficient
  169.          filtering (automatic filtering not enabled at the connection
  170.          server).  This problem also occurred more frequently on Ethernet
  171.          LANs.
  172.  
  173.       IC07968 - WCL0565 Can Also Mean Incorrect Adapter Address
  174.  
  175.          WCL0565 error message returned when adapter address of 000000000002 
  176.          was used.  Correct address ranges will now be specified in the help.
  177.  
  178.  
  179. 5.0 - NEW FEATURES
  180. ==================
  181.  
  182. The following sections discuss new and enhanced LAN Distance features.
  183.  
  184.  
  185. 5.1 - Windows for Workgroups 3.11 Support
  186.  
  187.    This section describes important information for setting up the
  188.    LAN Distance Remote product for MS Windows to run on Windows for
  189.    Workgroups 3.11.
  190.  
  191.    5.1.1 - READ THE FOLLOWING BEFORE YOU BEGIN SETUP STEPS:
  192.  
  193.       * The Windows for Workgroups product and any Windows applications
  194.         that you are using should operate correctly in the LAN environment
  195.         BEFORE you install the LAN Distance product.
  196.  
  197.         NOTE:  Do not configure Windows for Workgroups to LOGON to the
  198.         LAN on startup.  Do not attempt to logon to the LAN until your
  199.         LAN Distance connection has been established.
  200.  
  201.       * After any upgrades, you must open and close the Settings notebook.
  202.         Select Yes to save default changes to the system configuration
  203.         files.
  204.  
  205.       * Both LAN Distance installation and Network Setup for Windows for
  206.         Workgroups prompt you to restart your workstation to make
  207.         configuration changes active.
  208.  
  209.         It's only necessary to restart your workstation ONCE, after you
  210.         complete the setup steps that follow.
  211.  
  212.       * You may experience the following NetBEUI incompatibility problem
  213.         when using the version of NetBEUI provided with Windows for
  214.         Workgroups.  Only use the IBM NetBEUI if you see this problem:
  215.  
  216.            - After you dial the LAN Distance Connection Server, the
  217.              connection status never changes from "connecting" to
  218.              "connected".
  219.  
  220.            - After about 30 seconds, this message is displayed:
  221.  
  222.              WCL0338:  A processing error occurred in the LAN Distance
  223.                        connection software.  The call to 'your phonebook
  224.                        entry name' cannot be completed.
  225.  
  226.                        The return code from Dial Services was 'a'.
  227.  
  228.         If you experience this problem, you may need to manually adjust
  229.         NetBEUI parameters in PROTOCOL.INI to the following recommended
  230.         values:
  231.  
  232.            NETBIOSTIMEOUT=2000
  233.            NETBIOSRETRIES=4
  234.            DLCRETRIES=5
  235.  
  236.         Other possible configuration problems are described in Setup Step 2,
  237.         "Other Possible PROTOCOL.INI Changes".
  238.  
  239.       * In addition to the steps provided below, sample configuration files
  240.         for some applications are provided in section 9.2 below as a
  241.         reference.
  242.  
  243.    5.1.2 - SETUP STEPS TO RUN ON WINDOWS FOR WORKGROUPS 3.11
  244.  
  245.       After installing LAN Distance, follow these steps to setup
  246.       LAN Distance to run on Windows for Workgroups 3.11:
  247.  
  248.       STEP 1 - Network Setup  (**Required**)
  249.  
  250.          * Delete any defined physical LAN adapter configuration.
  251.  
  252.          * LAN Distance provides an OEMSETUP.INF file that allows you to
  253.            add the "LAN Distance Logical Adapter" to the list of adapters
  254.            that you can select for Windows for Workgroups.
  255.  
  256.            If the "LAN Distance Logical Adapter" is not in the list of
  257.            adapters that Network Setup supports, select "Unlisted or
  258.            updated network adapter", then enter the LAN Distance path
  259.            (i.e., C:\WAL), in the Install Driver window.  This adds the LAN
  260.            Distance Logical Adapter to the list of supported adapters.
  261.  
  262.          * For general information about configuring network adapters and
  263.            protocols for Windows for Workgroups, see the "Windows for
  264.            Workgroups Resource Kit" (sold separately).
  265.  
  266.       STEP 2 - Other Possible PROTOCOL.INI Changes (**Optional**)
  267.  
  268.          * If you experience performance problems on a LAN workstation that
  269.            you are accessing from a MS Windows LAN Distance Remote, add the
  270.            following timer statements to the NetBEUI section of the
  271.            PROTOCOL.INI file for this LAN workstation.
  272.  
  273.               TI=60000
  274.               T1=10000
  275.               T2=2000
  276.               NETBIOSTIMEOUT=2000
  277.               NETBIOSRETRIES=4
  278.               DLCRETRIES=5
  279.  
  280.          * If you receive LAN Distance error message WCL0310 at the LAN
  281.            Distance Remote before you finish dialing the LAN Distance
  282.            Connection Server, change the MaxFrame value in the COMx section
  283.            (i.e.  COM1) of the PROTOCOL.INI file to 1536.
  284.  
  285.       STEP 3 - Restart Your Workstation  (**Required**)
  286.  
  287.          After completing Step 1, and making any other necessary changes
  288.          described in Step 2, restart your workstation.
  289.  
  290.       STEP 4 - Review Sample Configuration Files (** Optional **)
  291.  
  292.          See section 9.2 below.
  293.  
  294.    APAR IC07920 was created to add this support to the LAN Distance Remote
  295.    for MS Windows product.
  296.  
  297.  
  298. 5.2 - Security User Exit Enablement
  299.  
  300.    LAN Distance now supports two optional levels of security for
  301.    restricted access to the LAN and its resources.  One level is the
  302.    existing LAN Distance security (User Account Management), included in
  303.    the LAN Distance product.  The second level is a security user exit
  304.    package that is distributed separately from the LAN Distance product.
  305.    LAN Distance supports any OEM-provided security user exit package that
  306.    is developed in conformance with the LAN Distance Generalized Security
  307.    User Exit API.
  308.  
  309.    5.2.1 - What Is a Security User Exit Package?
  310.  
  311.       A security user exit package consists of two user exit modules:  one
  312.       for the client and one for the server.  The client and server user
  313.       exit modules work together to implement the user authentication
  314.       protocol defined by the security user exit package.  A user
  315.       authentication protocol is a series of user exit messages/tokens
  316.       exchanged between the client and server user exit modules when
  317.       validating the user of a LAN Distance client workstation that is
  318.       calling a LAN Distance connection server.
  319.  
  320.    5.2.2 - Using Multiple Security User Exit Packages
  321.  
  322.       One LAN Distance client workstation can use a different security user
  323.       exit package to access each different LAN Distance server workstation
  324.       it calls.  A LAN Distance server workstation must use only one
  325.       security user exit package to allow access from all LAN Distance
  326.       client workstations that call it.
  327.  
  328.    5.2.3 - Using Security User Exit Packages with LAN Distance Security
  329.  
  330.       Security user exit packages can be used with or without LAN Distance
  331.       security (User Account Management).  If LAN Distance security is used
  332.       with the security user exit package, the authentication will take
  333.       place first through the user exit and second through LAN Distance
  334.       security.
  335.  
  336.    5.2.4 - Enabling Security User Exit
  337.  
  338.       To enable the user-supplied security exit, this ServicePak must be
  339.       applied to the connection server and remote workstations that will
  340.       use the user exit.
  341.  
  342.    5.2.5 - LAN Distance Security User Exit Development Toolkit
  343.  
  344.       A development toolkit for the LAN Distance Security User Exit for
  345.       OS/2 and Windows is available.  The toolkit contains:
  346.  
  347.          - specification of the LAN Distance Generalized Security User
  348.            Exit API
  349.  
  350.          - description of how a LAN Distance security user exit can be
  351.            installed/registered at LAN Distance workstations
  352.  
  353.          - sample source code for developing your own LAN Distance security
  354.            user exit package
  355.  
  356.       The toolkit is available through IBM Service and Support by
  357.       referencing APAR IC07742.
  358.  
  359.  
  360. 5.3 - X.25 Enablement
  361.  
  362.    The LAN Distance Remote for MS Windows product has been enhanced to
  363.    allow dial-in connections to X.25 networks.  The connection must be
  364.    made to a PAD at a minimum line speed of 9600 bps, using an 8-None-1
  365.    asynchronous protocol.  Customers will need to create their own script
  366.    (DDF) file and modem (PIF) file for use with the particular network
  367.    installation available to them.  Instructions and examples for creating
  368.    these files may be found in the README.X25 file provided with the
  369.    LAN Distance 1.1 Connection Server.
  370.  
  371.    APAR IC07921 was created to add this enablement to the LAN Distance for
  372.    MS Windows product.
  373.  
  374.  
  375. 6.0 - LAN APPLICATIONS CONSIDERATIONS
  376. =====================================
  377.  
  378. The following sections discuss additional considerations for using specific
  379. LAN applications with the LAN Distance Remote for MS Windows product.
  380.  
  381. 6.1 - AttachMate Xtra
  382.  
  383.    This section discusses configuration file changes you must make to use
  384.    AttachMate Xtra Versions 3.4 and 4.0 with LAN Distance.
  385.  
  386.    6.1.1 - Using AttachMate Xtra Version 3.4
  387.  
  388.       * The sample configuration files in section 9.1 below demonstrate a
  389.         working configuration for using Xtra Version 3.4 and IBM Dos LAN
  390.         Requester with the LAN Distance Remote product.
  391.  
  392.       * NOTE:  You need to make two important changes in the
  393.         \WAL\PROTOCOL.INI file if you are dialing in to a Token Ring LAN.
  394.         If you are dialing in to an Ethernet LAN, the changes are not
  395.         necessary but the sample files may be helpful in getting your
  396.         workstation memory optimized so that both programs may load.
  397.  
  398.    6.1.2 - Using AttachMate's Xtra Version 4.0
  399.  
  400.       * If you are using AttachMate's Xtra version 4.0, you will not need
  401.         the following line in your AUTOEXEC.BAT:
  402.  
  403.            C:\EXTRAWIN\DLCINTFC /I=265 /M /E
  404.  
  405.       * Edit your SYSTEM.INI file to change the VATMDLC_ETHERNETNETWORK
  406.         parameter to YES.  Do this regardless of whether you are dialing in
  407.         to a Token Ring or Ethernet LAN.
  408.  
  409.       * You may need to increase your NETHEAP parameter to use AttachMate
  410.         Xtra with LAN Distance.
  411.  
  412.  
  413. 6.2 - NetWare
  414.  
  415.    This section discusses additional considerations for using NetWare with
  416.    the LAN Distance product.
  417.  
  418.    6.2.1 - NetWare Server
  419.  
  420.       * For a NetWare server to support clients using packet burst in a WAN
  421.         environment, the NetWare server must have PBURST.EXE or later fix.
  422.  
  423.         PBURST.EXE has packet burst files with a new packet burst algorithm
  424.         for WAN links to fix problems where:
  425.  
  426.            - Burst retries could saturate WAN links due to low retry
  427.              timeout values.
  428.  
  429.            - Workstations hang when duplicate packets from a previous burst
  430.              are received in the middle of the current burst.
  431.  
  432.         PBURST.NLM is for use on NetWare 3.11 file servers.  PBWANFIX.NLM
  433.         (which requires Patchman) is for use on NetWare 3.12 and 4.01 file
  434.         servers.
  435.  
  436.         This NetWare fix is available through IBM Support and Service by
  437.         referencing APAR IC07834.
  438.  
  439.       * In a token ring environment, make sure that ROUTE.NLM is loaded on
  440.         the NetWare server.  Since the LAN Distance connection server is a
  441.         token ring bridge, source level routing information must be in
  442.         frames to be delivered to the WAN by the connection server.
  443.  
  444.    6.2.2 - NetWare Client for DOS
  445.  
  446.       * In order to enable LAN Distance for NetWare during LAN Distance
  447.         installation or through the Settings notebook, LSL.COM and VLM.EXE
  448.         must be in the NetWare directory.  LAN Distance requires the use of
  449.         VLM.EXE.
  450.  
  451.         When using packet burst for the NetWare Client for DOS, the latest
  452.         VLM.EXE is required.  This NetWare fix is available through IBM
  453.         Support and Service by referencing APAR IC08000.
  454.  
  455.       * To improve performance, copy frequently used NetWare utilities to
  456.         the NetWare requester.  For example:  LOGON.EXE, LOGOUT.EXE,
  457.         MAP.EXE and SLIST.EXE.
  458.  
  459.       * For a token ring environment, LAN Distance requires all frames to
  460.         have source routing information.  This means ROUTE.NLM must be
  461.         loaded on the NetWare server and ROUTE.COM must be loaded for the
  462.         NetWare Client for DOS.
  463.  
  464.       * Make sure that DOSUP9 and WINUP9 (or later) fixes have been applied
  465.         for the NetWare Client for DOS.
  466.  
  467.  
  468. 6.3 - Difficulty Running Applications on Token Ring LAN
  469.  
  470.    If you are dialing into a Token Ring LAN and have difficulty running
  471.    applications (this has happened with several TCP/IP products), change
  472.    the MAXFRAME parameter from 1080 to 1536.  This happens in two places in
  473.    PROTOCOL.INI.  The AttachMate sample configuration files in section 9.1
  474.    below show an explicit example of how to do this.
  475.  
  476.  
  477. 6.4 - TCPDOS
  478.  
  479.    After installing TCPDOS and LAN Distance, open and close the Settings
  480.    notebook.  Select Yes to save default changes to the system
  481.    configuration files.
  482.  
  483.  
  484. 6.5 - Banyan VINES
  485.  
  486.    This section discusses Banyan VINES fixes and DOS workstation setup
  487.    instructions.
  488.  
  489.    NOTE:  Sample configuration files for using Banyan VINES in a token ring
  490.    environment over LAN Distance are in section 9.3 below.
  491.  
  492.    6.5.1 - Banyan VINES Fixes
  493.  
  494.       The following Banyan fixes are in the Banyan Maintenance release
  495.       5.54(5).  If this release is not available, then contact your
  496.       Banyan SE.
  497.  
  498.       Two modifications of the Banyan VINES Protocol drivers were required
  499.       for Banyan VINES and LAN Distance to work together correctly:
  500.  
  501.          1. Adjustable metrics were added for the NDIS protocol.  This
  502.             required modification to the server and client side drivers.
  503.             The server side is adjusted dynamically; therefore, no
  504.             configuration is required.  On the client side an additional
  505.             parameter was added for the NDIS configuration:
  506.  
  507.                METRIC=xx
  508.  
  509.                   - where xx is the configured metric for the client
  510.                   interface.
  511.  
  512.             If the metric parameter is not used, NDIS will default to 2 for
  513.             Ethernet and 16meg token ring, 4 for 4 meg token ring.  This
  514.             metric is a timeout value for determining when to retransmit a
  515.             frame.
  516.  
  517.             The following summarizes metric parameters values:
  518.  
  519.                Serial Port Speeds      Metric values
  520.                ------------------      -------------
  521.                9600, 19,200                 90
  522.                38,400                       80
  523.                57,600 and higher            45
  524.  
  525.             This parameter goes in the PROTOCOL.INI [VINES_XIF] section.
  526.  
  527.          2. For the DOS/Windows Client only A PACEMODE parameter was added
  528.             to prevent buffer overflow when multiple SPP connections are in
  529.             use at the same time.  PACEMODE=0 is the default which allows
  530.             windowing of SPP packets, PACEMODE=1 puts the SPP connection
  531.             into single packet mode.
  532.  
  533.             This parameter goes in the PROTOCOL.INI [VINES_XIF] section.
  534.  
  535.       Additionally, the DOS/Windows Banyan client was changed to allow
  536.       Banyan to start when the network does not exist.  Over LAN Distance
  537.       the network does not exist until the LAN Distance connection is
  538.       established.
  539.  
  540.    6.5.2 - Banyan DOS Workstation Setup
  541.  
  542.       Use the following steps for setting up the Banyan DOS workstation:
  543.  
  544.          1. Install Banyan on the DOS workstation.
  545.  
  546.          2. Install LAN Distance and configure the remote workstation for
  547.             connecting to the connection server.
  548.  
  549.          3. Run PCCONFIG.  Set the default Network Card settings for either
  550.             the NDIS token ring or NDIS Ethernet drivers.  Specify
  551.             SOCKDD_MOD as the PROTOCOL.INI bindings.  For the NDIS token
  552.             ring driver, end node source routing must be enabled.
  553.  
  554.             Select the NDIS token ring or NDIS Ethernet driver as the
  555.             default communications driver.
  556.  
  557.          4. Edit PROTOCOL.INI and add the following lines:
  558.  
  559.                [VINES_XIF]
  560.                   DRIVERNAME=NDISBAN$
  561.                   BINDINGS="SOCKDD_MOD"
  562.                   PACEMODE=0
  563.                   LANABASE=0
  564.                   METRIC=90
  565.  
  566.             Additionally, make sure that the MAXFRAME parameter is set to
  567.             1524 in the COM port and SOCKDD_MOD sections of PROTOCOL.INI.
  568.  
  569.          5. Edit AUTOEXEC.BAT and add the following lines in the following
  570.             order for an Ethernet configuration:
  571.  
  572.                BAN /NC
  573.                NDISBAN
  574.                c:\WAL\DOSBIND
  575.                REDIRALL
  576.                WIN
  577.  
  578.             NOTES:
  579.                1. For token ring use NDTOKBAN instead of NDISBAN.
  580.  
  581.                2. Do not run the ARSWAIT program which is normally run with
  582.                NDIS drivers under VINES.
  583.  
  584.          6. Reboot the workstation.  When AUTOEXEC.BAT is executed, you
  585.             will see the following message which is normal:
  586.  
  587.                No Network Interface enabled . . .
  588.  
  589.          7. Establish a LAN Distance connection.  At this point the Z drive
  590.             will exist and you can login to the Banyan server.
  591.  
  592.          8. Note that frequently used executables such as login should be
  593.             copied to the local Banyan VINES directory.  See chapter 10 in
  594.             the LAN Distance Advanced Guide for the section on additional
  595.             tips for using Banyan VINES over LAN Distance.
  596.  
  597.  
  598. 6.6 - LAN Workplace for DOS
  599.  
  600.    After installing LAN Workplace for DOS and then LAN Distance, follow the
  601.    steps below.
  602.  
  603.    NOTE:  Sample configuration files for using LAN Workplace for DOS
  604.    version 4.2 in a token ring environment over LAN Distance are in section
  605.    9.4 below.
  606.  
  607.       1. Edit WAL\PROTOCOL.INI and add the following ODI2NDI section:
  608.  
  609.             [ODI2NDI_mod]
  610.                DRIVERNAME=ODI2NDI$
  611.                BINDINGS=SOCKDD_MOD
  612.                NetAddress="t400010FD0DFA"
  613.                TOKEN-RING=YES
  614.                TOKEN-RING_SNAP=YES
  615.  
  616.       2. Edit the NET.CFG file and change the Link Driver line to
  617.          Link Driver SOCKDD_MOD:
  618.  
  619.             Link Driver SOCKDD_MOD
  620.                     Frame TOKEN-RING_SNAP
  621.                     Protocol IP 800 TOKEN-RING_SNAP
  622.  
  623.          NOTE:  Currently, ODI2NDI only supports one logical board.
  624.          Therefore, it is not possible to support IPX and IP at the same
  625.          time using ODI2NDI.
  626.  
  627.       3. Edit LANWP.BAT and change the token driver to ODI2NDI and add the
  628.          C:\WAL\DOSBIND statement after the ODI2NDI line.
  629.  
  630.       4. Edit AUTOEXEC.BAT and remove the C:\WAL\DOSBIND statement.
  631.  
  632.       5. In a token ring environment, make sure ROUTE is loaded in
  633.          LANWP.BAT.  LAN Distance requires that source level routing
  634.          information be in all frames.  Add the following ROUTE statement
  635.          before the TCPIP.EXE line in LANWP.BAT:
  636.  
  637.             c:\net\nwclient\route
  638.  
  639.  
  640. 7.0 - KNOWN PROBLEMS AND RESTRICTIONS
  641. =====================================
  642.  
  643. 7.1 - Microcom Modem
  644.  
  645.    The following problems occasionally occur when using the Microcom modem
  646.    with the LAN Distance product:
  647.  
  648.       - After having successfully connected with the Microcom modem,
  649.         attempts to reconnect with the modem or to connect with
  650.         another modem have failed.
  651.  
  652.       - The Microcom modem will not initially connect with certain modems.
  653.  
  654.    The following are symptoms of the above problems:
  655.  
  656.       - The modem appears "deaf" to dialing strings.
  657.       - The modem fails to go off hook.
  658.       - The modem DTR signal fails to turn on.
  659.  
  660.    Using other PIF files, specifically MICROPRT.PIF, will alleviate the
  661.    problems in a few cases.
  662.  
  663.    For assistance in using the Microcom modem, please contact your Microcom
  664.    dealer.
  665.  
  666.  
  667. 7.2 - NETBIOS over TCP/IP
  668.  
  669.    The LAN Distance product does not support NETBIOS over TCP/IP (device
  670.    driver TCPBEUI.OS2).
  671.  
  672. 7.3 - Parameters dropped from LSP Device statements in CONFIG.SYS
  673.  
  674.    Parameters on LSP Device statements in CONFIG.SYS may be lost when LAN 
  675.    Distance settings are saved.  Any parameters required by the applications 
  676.    on the system (for example, DCAF and AttachMate) must be restored to the 
  677.    Device statement.  The parameter(s) can be restored from the Device 
  678.    statement saved in the backup file, CONFIG.WAL.
  679.  
  680.    Memory optimization parameters should not be restored; they
  681.    will be replaced when the memory optimizers are rerun.
  682.  
  683. 7.4 - TAPLF.DOS DeviceHigh statement
  684.  
  685.    LAN Distance Remote for Windows adds a DeviceHigh statement to CONFIG.SYS
  686.    for TAPLF.DOS.  If this statement displaces other device drivers previously
  687.    loaded in high memory, change the TAPLF.DOS DeviceHigh statement to a
  688.    conventional Device statement.
  689.  
  690.  
  691. 8.0 - SUPPORT AND FEEDBACK
  692. ==========================
  693.  
  694. Refer to the License Information booklet in the LAN Distance package for
  695. problem reporting and assistance with the LAN Distance product.
  696.  
  697. While not support mechanisms, the following two fora contain feedback,
  698. updates, and information on the LAN Distance product:
  699.  
  700.    - OS2BBS, REMOTE section
  701.    - CompuServe, GO PSPAPROD, LAN DISTANCE section
  702.  
  703.  
  704. 9.0 - SAMPLE CONFIGURATION FILES
  705. =================================
  706.  
  707. 9.1 - For AttachMate Xtra
  708.  
  709. ┌──────────────────────────────┐
  710. │ CONFIG.SYS - AttachMate Xtra │
  711. └──────────────────────────────┘
  712.    BREAK=ON
  713.    buffers=42
  714.    FILES=30
  715.    rem DEVICE=C:\WINDOWS\SMARTDRV.EXE /DOUBLE_BUFFER
  716.    DEVICE=C:\DOS\HIMEM.SYS
  717.    dos=high,umb
  718.    DEVICE=C:\DOS\SETVER.EXE
  719.    DEVICE=C:\WINDOWS\EMM386.EXE NOEMS
  720.    rem device=c:\dos\ramboost.exe load
  721.    STACKS=9,256
  722.    SHELL=C:\COMMAND.COM /E:2000 /P
  723.    LASTDRIVE=Z
  724.    DEVICEHIGH=c:\WAL\protman.dos /I:c:\WAL
  725.    DEVICE=c:\LSP\dxma0mod.sys
  726.    DEVICEHIGH=c:\WAL\dxmj0mod.sys
  727.    DEVICE=c:\LSP\dxme0mod.sys
  728.    DEVICEHIGH=c:\WAL\dosvmac.sys
  729.    DEVICEHIGH=c:\WAL\WINAMAC.SYS
  730.    DEVICEHIGH=c:\WAL\PCMDD.SYS
  731.  
  732. ┌────────────────────────────────┐
  733. │ AUTOEXEC.BAT - AttachMate Xtra │
  734. └────────────────────────────────┘
  735.    c:\WAL\DOSBIND
  736.    REM C:\WINDOWS\SMARTDRV.EXE
  737.    @ECHO OFF
  738.    PROMPT $p$g
  739.    PATH c:\WAL;C:\DOSLAN;C:\EXTRAWIN;C:\WINDOWS;C:\DOS;
  740.    SET TEMP=C:\DOS
  741.    C:\DOS\MOUSE.COM
  742.    doskey
  743.    REM ***********************************************************************
  744.    REM
  745.    REM                    DLC Interface Module Description
  746.    REM
  747.    REM /I=#### number is the IFrame size values are 265, 521, 1033, 2042, 3964
  748.    REM
  749.    REM /S  use a Small Buffer Pool
  750.    REM /M  use a Medium Buffer Pool
  751.    REM /L  use a Large Buffer Pool
  752.    REM
  753.    REM /U  unload the DLC interface module
  754.    REM
  755.    pause
  756.    REM
  757.    REM Note, the /I=265 below may not work in all environments.
  758.    REM
  759.    C:\EXTRAWIN\DLCINTFC /I=265 /M /E
  760.  
  761. ┌────────────────────────────────┐
  762. │ PROTOCOL.INI - AttachMate Xtra │
  763. └────────────────────────────────┘
  764.    [PROTOCOL_MANAGE]
  765.       DriverName=PROTMAN$
  766.       Bindings=SOCKDD_MOD
  767.  
  768.    [NETBEUI]
  769.       DriverName=NETBEUI$
  770.       Bindings=SOCKDD_MOD
  771.       NCBS=32
  772.       Sessions=32
  773.       Names=17
  774.       MaxDatarcv=4168
  775.       MaxTransmits=6
  776.       TI=60000
  777.       T1=10000
  778.       T2=2000
  779.  
  780.    [DXME0_NIF]
  781.       DriverName = DXME0$
  782.       Bindings = SOCKDD_MOD
  783.  
  784.    [SOCKDD_MOD]
  785.       DriverName=VLANMAC$
  786.       LanType="TokenRing"
  787.       Mode="FLOWS"
  788.       NetAddress="t40001F960227"
  789.       MaxFrame=1536                <--- changed for Token Ring environment
  790.  
  791.    [COM1]
  792.       MaxFrame=1536                <--- changed for Token Ring environment
  793.       MACTYPE="802.5"
  794.       DRIVERNAME="COM1MAC$"
  795.       PCMSUPPORT="YES"
  796.       CONN_TYPE="SWITCHED"
  797.       PORTNAME="COM1"
  798.       TX_FIFO_SIZE=7
  799.  
  800.    [PDFH_nif]
  801.       DriverName=PDFH$
  802.  
  803.  
  804. 9.2 - For Windows for Workgroups 3.11
  805.  
  806.    * NOTE:  These sample configuration are from a LAN-attached workstation
  807.      were LAN Distance was installed AFTER each application was functioning
  808.      correctly.
  809.  
  810.    * The MaxFrame values listed in the configuration files may be different
  811.      for your environment.
  812.  
  813. ┌─────────────────────────────────────────────────┐
  814. │                                                 │
  815. │          Sample Configuraton Files for          │
  816. │  Chameleon 4.0 TCP/IP for Windows by NetManage  │
  817. │                                                 │
  818. └─────────────────────────────────────────────────┘
  819.  
  820. ┌─────────────────────────────────────────────────┐
  821. │ CONFIG.SYS - Windows for Workgroups & Chameleon │
  822. └─────────────────────────────────────────────────┘
  823.    DEVICE=C:\WFW\HIMEM.SYS
  824.    DOS=HIGH
  825.    DEVICE=C:\DOS\SETVER.EXE
  826.    DEVICE=C:\WFW\EMM386.EXE NOEMS
  827.    FILES=30
  828.    BUFFERS=10
  829.    DEVICE=C:\WFW\SMARTDRV.EXE /DOUBLE_BUFFER
  830.    STACKS=9,256
  831.    LASTDRIVE=Z
  832.    DEVICE=C:\WFW\IFSHLP.SYS
  833.    DEVICE=c:\WAL\TAPLF.DOS
  834.    DEVICEHIGH=c:\WAL\PCMDD.SYS
  835.  
  836. ┌───────────────────────────────────────────────────┐
  837. │ AUTOEXEC.BAT - Windows for Workgroups & Chameleon │
  838. └───────────────────────────────────────────────────┘
  839.    C:\WFW\net start netbind
  840.    C:\WFW\SMARTDRV.EXE /L /X
  841.    @ECHO OFF
  842.    PROMPT $p$g
  843.    PATH=c:\WAL;C:\NETMANAG;C:\WFW;C:\WINDOWS;C:\DOS
  844.    SET TEMP=C:\DOS
  845.    C:\DOS\MOUSE.COM
  846.  
  847. ┌───────────────────────────────────────────────────┐
  848. │ PROTOCOL.INI - Windows for Workgroups & Chameleon │
  849. └───────────────────────────────────────────────────┘
  850.    [network.setup]
  851.       version=0x3110
  852.       netcard=sockdd_mod,1,SOCKDD_MOD,1
  853.       transport=ms$nwlinknb,NWLINK
  854.       transport=ms$ndishlp,MS$NDISHLP
  855.       transport=ms$netbeui,NETBEUI
  856.       lana0=sockdd_mod,1,ms$netbeui
  857.       lana1=sockdd_mod,1,ms$nwlinknb
  858.       lana2=sockdd_mod,1,ms$ndishlp
  859.  
  860.    [protman]
  861.       DriverName=PROTMAN$
  862.       PRIORITY=MS$NDISHLP
  863.  
  864.    [NWLINK]
  865.       BINDINGS=SOCKDD_MOD
  866.  
  867.    [MS$NDISHLP]
  868.       DriverName=ndishlp$
  869.       BINDINGS=SOCKDD_MOD
  870.  
  871.    [NETBEUI]
  872.       DriverName=NETBEUI$
  873.       SESSIONS=32
  874.       NCBS=32
  875.       BINDINGS=SOCKDD_MOD
  876.       LANABASE=0
  877.       Names=17
  878.       MaxDatarcv=4168
  879.       MaxTransmits=6
  880.       TI=60000
  881.       T1=10000
  882.       T2=2000
  883.  
  884.    [NETMANAGE]
  885.       DRIVERNAME=NETMNG$
  886.       BINDINGS=SOCKDD_MOD
  887.  
  888.    [SOCKDD_MOD]
  889.       DriverName=VLANMAC$
  890.       LanType="TokenRing"
  891.       Mode="FLOWS"
  892.       NetAddress=T400065752399
  893.       MaxFrame=1080
  894.  
  895.    [TokenRing]
  896.       DRIVERNAME=IBMTOK$
  897.  
  898.    [COM1]
  899.       DriverName=COM1MAC$
  900.       MAXFRAME=1536
  901.       PCMSUPPORT="yes"
  902.       MACTYPE="802.5"
  903.       CONN_TYPE="Switched"
  904.       TX_FIFO_SIZE=7
  905.       PCMCIA="no"
  906.       PORTNAME="COM1"
  907.  
  908. ┌─────────────────────────────────────────────────┐
  909. │ SYSTEM.INI - Windows for Workgroups & Chameleon │
  910. └─────────────────────────────────────────────────┘
  911.    [boot]
  912.    shell=progman.exe
  913.    network.drv=wfwnet.drv
  914.    mouse.drv=mouse.drv
  915.    language.dll=
  916.    sound.drv=mmsound.drv
  917.    comm.drv=comm.drv
  918.    keyboard.drv=keyboard.drv
  919.    system.drv=system.drv
  920.    386grabber=vga30.3gr
  921.    oemfonts.fon=vgaoem.fon
  922.    fixedfon.fon=vgafix.fon
  923.    fonts.fon=vgasys.fon
  924.    display.drv=vga.drv
  925.    drivers=mmsystem.dll
  926.  
  927.    [keyboard]
  928.    subtype=
  929.    type=4
  930.    keyboard.dll=
  931.    oemansi.bin=
  932.  
  933.    [boot.description]
  934.    keyboard.typ=Enhanced 101 or 102 key US and Non US keyboards
  935.    mouse.drv=Microsoft, or IBM PS/2
  936.    language.dll=English (American)
  937.    system.drv=MS-DOS System
  938.    codepage=437
  939.    woafont.fon=English (437)
  940.    aspect=100,96,96
  941.    display.drv=XGA (640x480, 16 colors)
  942.    network.drv=Microsoft Windows Network (version 3.11)
  943.    secondnet.drv=No Additional Network Installed
  944.  
  945.    [386Enh]
  946.    device=*vpd
  947.    mouse=*vmd
  948.    ebios=*ebios
  949.    woafont=dosapp.fon
  950.    display=vddvga30.386
  951.    EGA80WOA.FON=EGA80WOA.FON
  952.    EGA40WOA.FON=EGA40WOA.FON
  953.    CGA80WOA.FON=CGA80WOA.FON
  954.    CGA40WOA.FON=CGA40WOA.FON
  955.    keyboard=*vkd
  956.    network=*vnetbios,*vwc,vnetsup.386,vredir.386,vserver.386
  957.    netheapsize=20
  958.    DEVICE=c:\wal\ldvcd.386
  959.    device=*vpicd
  960.    device=*vtd
  961.    device=*reboot
  962.    device=*vdmad
  963.    device=*vsd
  964.    device=*v86mmgr
  965.    device=*pageswap
  966.    device=*dosmgr
  967.    device=*vmpoll
  968.    device=*wshell
  969.    device=*PAGEFILE
  970.    device=*BLOCKDEV
  971.    device=*vfd
  972.    device=*parity
  973.    device=*biosxlat
  974.    device=*vmcpd
  975.    device=*combuff
  976.    device=*cdpscsi
  977.    device=vtdapi.386
  978.    device=vpmtd.386
  979.    device=vcomm.386
  980.    device=serial.386
  981.    device=lpt.386
  982.    device=ifsmgr.386
  983.    device=vcache.386
  984.    device=vshare.386
  985.    local=CON
  986.    FileSysChange=off
  987.    COM3Irq=4
  988.    COM3Base=03E8
  989.    COM4Irq=3
  990.    COM4Base=02E8
  991.    PagingFile=C:\WFW\WIN386.SWP
  992.    MaxPagingFileSize=53248
  993.    netmisc=ndis.386,ndis2sup.386
  994.    netcard=
  995.    transport=nwlink.386,nwnblink.386,netbeui.386
  996.    InDOSPolling=FALSE
  997.    VPollHeapSize=14
  998.    TimeCriticalSection=8
  999.  
  1000.    [NonWindowsApp]
  1001.    localtsrs=dosedit,ced
  1002.  
  1003.    [vcache]
  1004.    minfilecache=512
  1005.  
  1006.    [mci]
  1007.    WaveAudio=mciwave.drv
  1008.    Sequencer=mciseq.drv
  1009.    CDAudio=mcicda.drv
  1010.  
  1011.    [drivers]
  1012.    timer=timer.drv
  1013.    midimapper=midimap.drv
  1014.  
  1015.    [DDEShares]
  1016.    CHAT$=winchat,chat,,31,,0,,0,0,0
  1017.    SCHAT$=winchat,chat,,31,,0,,0,0,0
  1018.    CLPBK$=clipsrv,system,,31,,0,,0,0,0
  1019.    HEARTS$=mshearts,hearts,,15,,0,,0,0,0
  1020.  
  1021.    [Network]
  1022.    winnet=wfwnet/00025100
  1023.    multinet=nonet
  1024.    FileSharing=Yes
  1025.    PrintSharing=Yes
  1026.    LogonDisconnected=yes
  1027.    EnableSharing=Yes
  1028.    UserName=USER1
  1029.    Workgroup=WORKGROUP
  1030.    ComputerName=USER1
  1031.    Comment=User1
  1032.    logonvalidated=no
  1033.  
  1034.    [network drivers]
  1035.    netcard=c:\wal\dosvmac.sys,c:\wal\winamac.sys
  1036.    transport=ndishlp.sys,c:\netmanag\netmanag.dos,*netbeui
  1037.    devdir=C:\WFW
  1038.    LoadRMDrivers=Yes
  1039.  
  1040.    [NWNBLINK]
  1041.    LANABASE=1
  1042.  
  1043.    [Password Lists]
  1044.    *Shares=C:\WFW\Share000.PWL
  1045.  
  1046.  
  1047. ┌────────────────────────────────────┐
  1048. │                                    │
  1049. │  Sample Configuration Files for    │
  1050. │  NetWare 3.12 DOS/Windows Client   │
  1051. │       (LAN type = Ethernet)        │
  1052. │                                    │
  1053. └────────────────────────────────────┘
  1054.  
  1055. ┌───────────────────────────────────────────────┐
  1056. │ CONFIG.SYS - Windows for Workgroups & NetWare │
  1057. └───────────────────────────────────────────────┘
  1058.    DEVICE=C:\WFW\HIMEM.SYS
  1059.    DOS=HIGH
  1060.    DEVICE=C:\DOS\SETVER.EXE
  1061.    DEVICE=C:\WFW\EMM386.EXE NOEMS
  1062.    FILES=40
  1063.    BUFFERS=10
  1064.    DEVICE=C:\WFW\SMARTDRV.EXE /DOUBLE_BUFFER
  1065.    STACKS=9,256
  1066.    LASTDRIVE=Z
  1067.    DEVICE=C:\WFW\IFSHLP.SYS
  1068.    DEVICE=c:\WAL\TAPLF.DOS
  1069.    DEVICEHIGH=c:\WAL\PCMDD.SYS
  1070.  
  1071. ┌─────────────────────────────────────────────────┐
  1072. │ AUTOEXEC.BAT - Windows for Workgroups & NetWare │
  1073. └─────────────────────────────────────────────────┘
  1074.    C:\WFW\SMARTDRV.EXE /L /X
  1075.    @ECHO OFF
  1076.    PROMPT $p$g
  1077.    PATH=c:\WAL;C:\WFW;C:\WINDOWS;C:\DOS
  1078.    SET TEMP=C:\DOS
  1079.    C:\DOS\MOUSE.COM
  1080.    c:\wfw\net init
  1081.    C:\NWCLIENT\LSL.COM
  1082.    C:\WAL\ODI2NDI.COM
  1083.    C:\WFW\net start netbind
  1084.    C:\NWCLIENT\IPXODI.COM
  1085.    C:\NWCLIENT\VLM.EXE /C=C:\WAL\NET.CFG
  1086.  
  1087. ┌─────────────────────────────────────────────────┐
  1088. │ PROTOCOL.INI - Windows for Workgroups & NetWare │
  1089. └─────────────────────────────────────────────────┘
  1090.    [network.setup]
  1091.    version=0x3110
  1092.    netcard=sockdd_mod,1,SOCKDD_MOD,1
  1093.    transport=ms$nwlinknb,NWLINK
  1094.    transport=ms$netbeui,NETBEUI
  1095.    transport=ms$ndishlp,MS$NDISHLP
  1096.    lana0=sockdd_mod,1,ms$netbeui
  1097.    lana1=sockdd_mod,1,ms$nwlinknb
  1098.    lana2=sockdd_mod,1,ms$ndishlp
  1099.  
  1100.    [NWLINK]
  1101.    BINDINGS=SOCKDD_MOD
  1102.  
  1103.    [Link Driver TOKEN]
  1104.    data=   Frame Token-Ring
  1105.    data=Link Driver TOKEN
  1106.  
  1107.    [protman]
  1108.    DriverName=PROTMAN$
  1109.    PRIORITY=MS$NDISHLP
  1110.  
  1111.    [MS$NDISHLP]
  1112.    DriverName=ndishlp$
  1113.    BINDINGS=SOCKDD_MOD
  1114.  
  1115.    [NETBEUI]
  1116.       DriverName=NETBEUI$
  1117.       Bindings=SOCKDD_MOD
  1118.       NCBS=32
  1119.       Sessions=32
  1120.       Names=17
  1121.       MaxDatarcv=4168
  1122.       MaxTransmits=6
  1123.       TI=60000
  1124.       T1=10000
  1125.       T2=2000
  1126.       LANABASE=0
  1127.  
  1128.    [SOCKDD_MOD]
  1129.       DriverName=VLANMAC$
  1130.       LanType="Ethernet"
  1131.       Mode="FLOWS"
  1132.       NetAddress="i0200A6AEC499"
  1133.       MaxFrame=1514
  1134.  
  1135.    [COM1]
  1136.       DriverName=COM1MAC$
  1137.       MAXFRAME=1514
  1138.       PCMSUPPORT="yes"
  1139.       MACTYPE="802.3"
  1140.       CONN_TYPE="Switched"
  1141.       TX_FIFO_SIZE=7
  1142.       PCMCIA="no"
  1143.       PORTNAME="COM1"
  1144.  
  1145.    [PDFH_nif]
  1146.       DriverName=PDFH$
  1147.  
  1148.    [ODI2NDI_MOD]
  1149.       DRIVERNAME=ODI2NDI$
  1150.       BINDINGS=SOCKDD_MOD
  1151.       NETADDRESS="i0200A6AEC499"
  1152.       ETHERNET_802.3=YES
  1153.  
  1154. ┌───────────────────────────────────────────────┐
  1155. │ SYSTEM.INI - Windows for Workgroups & NetWare │
  1156. └───────────────────────────────────────────────┘
  1157.    [boot]
  1158.    shell=progman.exe
  1159.    network.drv=wfwnet.drv
  1160.    mouse.drv=mouse.drv
  1161.    language.dll=
  1162.    sound.drv=mmsound.drv
  1163.    comm.drv=comm.drv
  1164.    keyboard.drv=keyboard.drv
  1165.    system.drv=system.drv
  1166.    386grabber=vga30.3gr
  1167.    oemfonts.fon=vgaoem.fon
  1168.    fixedfon.fon=vgafix.fon
  1169.    fonts.fon=vgasys.fon
  1170.    display.drv=vga.drv
  1171.    drivers=mmsystem.dll
  1172.    secondnet.drv=netware.drv
  1173.  
  1174.    [keyboard]
  1175.    subtype=
  1176.    type=4
  1177.    keyboard.dll=
  1178.    oemansi.bin=
  1179.  
  1180.    [boot.description]
  1181.    keyboard.typ=Enhanced 101 or 102 key US and Non US keyboards
  1182.    mouse.drv=Microsoft, or IBM PS/2
  1183.    language.dll=English (American)
  1184.    system.drv=MS-DOS System
  1185.    codepage=437
  1186.    woafont.fon=English (437)
  1187.    aspect=100,96,96
  1188.    display.drv=XGA (640x480, 16 colors)
  1189.    network.drv=Microsoft Windows Network (version 3.11)
  1190.    secondnet.drv=Novell NetWare (Workstation Shell 3.X)
  1191.  
  1192.    [386Enh]
  1193.    device=*vpd
  1194.    mouse=*vmd
  1195.    ebios=*ebios
  1196.    woafont=dosapp.fon
  1197.    display=vddvga30.386
  1198.    EGA80WOA.FON=EGA80WOA.FON
  1199.    EGA40WOA.FON=EGA40WOA.FON
  1200.    CGA80WOA.FON=CGA80WOA.FON
  1201.    CGA40WOA.FON=CGA40WOA.FON
  1202.    keyboard=*vkd
  1203.    network=*vnetbios,*vwc,vnetsup.386,vredir.386,vserver.386
  1204.    netheapsize=20
  1205.    DEVICE=c:\wal\ldvcd.386
  1206.    device=*vpicd
  1207.    device=*vtd
  1208.    device=*reboot
  1209.    device=*vdmad
  1210.    device=*vsd
  1211.    device=*v86mmgr
  1212.    device=*pageswap
  1213.    device=*dosmgr
  1214.    device=*vmpoll
  1215.    device=*wshell
  1216.    device=*PAGEFILE
  1217.    device=*BLOCKDEV
  1218.    device=*vfd
  1219.    device=*parity
  1220.    device=*biosxlat
  1221.    device=*vmcpd
  1222.    device=*combuff
  1223.    device=*cdpscsi
  1224.    device=vtdapi.386
  1225.    device=vpmtd.386
  1226.    device=vcomm.386
  1227.    device=serial.386
  1228.    device=lpt.386
  1229.    device=ifsmgr.386
  1230.    device=vcache.386
  1231.    device=vshare.386
  1232.    local=CON
  1233.    FileSysChange=off
  1234.    COM3Irq=4
  1235.    COM3Base=03E8
  1236.    COM4Irq=3
  1237.    COM4Base=02E8
  1238.    PagingFile=C:\WFW\WIN386.SWP
  1239.    MaxPagingFileSize=53248
  1240.    netmisc=ndis.386,ndis2sup.386
  1241.    netcard=
  1242.    transport=nwlink.386,nwnblink.386,netbeui.386
  1243.    InDOSPolling=FALSE
  1244.    VPollHeapSize=14
  1245.    ReflectDOSInt2A=TRUE
  1246.    UniqueDOSPSP=TRUE
  1247.    PSPIncrement=5
  1248.    OverlappedIO=off
  1249.    secondnet=vnetware.386
  1250.    TimeCriticalSection=8
  1251.  
  1252.    [NonWindowsApp]
  1253.    localtsrs=dosedit,ced
  1254.  
  1255.    [vcache]
  1256.    minfilecache=512
  1257.  
  1258.    [mci]
  1259.    WaveAudio=mciwave.drv
  1260.    Sequencer=mciseq.drv
  1261.    CDAudio=mcicda.drv
  1262.  
  1263.    [drivers]
  1264.    timer=timer.drv
  1265.    midimapper=midimap.drv
  1266.  
  1267.    [DDEShares]
  1268.    CHAT$=winchat,chat,,31,,0,,0,0,0
  1269.    SCHAT$=winchat,chat,,31,,0,,0,0,0
  1270.    CLPBK$=clipsrv,system,,31,,0,,0,0,0
  1271.    HEARTS$=mshearts,hearts,,15,,0,,0,0,0
  1272.  
  1273.    [Network]
  1274.    winnet=wfwnet/00025100
  1275.    multinet=netware3
  1276.    FileSharing=Yes
  1277.    PrintSharing=Yes
  1278.    LogonDisconnected=yes
  1279.    EnableSharing=Yes
  1280.    UserName=USER1
  1281.    Workgroup=WORKGROUP
  1282.    ComputerName=USER1
  1283.    Comment=User1
  1284.    logonvalidated=no
  1285.  
  1286.    [network drivers]
  1287.    netcard=c:\wal\dosvmac.sys,c:\wal\winamac.sys
  1288.    transport=*netbeui,ndishlp.sys
  1289.    devdir=C:\WFW
  1290.    LoadRMDrivers=Yes
  1291.  
  1292.    [NWNBLINK]
  1293.    LANABASE=1
  1294.  
  1295.    [Password Lists]
  1296.    *Shares=C:\WFW\Share000.PWL
  1297.  
  1298.    [NetWare]
  1299.    NWShareHandles=FALSE
  1300.    RestoreDrives=TRUE
  1301.  
  1302. ┌────────────────────────────────────────────┐
  1303. │ NET.CFG - Windows for Workgroups & NetWare │
  1304. └────────────────────────────────────────────┘
  1305.    Link Driver TOKEN
  1306.            PORT A20
  1307.            FRAME TOKEN-RING
  1308.            MAX FRAME SIZE 1514
  1309.  
  1310.    NetWare DOS Requester
  1311.               FIRST NETWORK DRIVE = F
  1312.               USE DEFAULTS = OFF
  1313.               VLM = CONN.VLM
  1314.               VLM = IPXNCP.VLM
  1315.               VLM = TRAN.VLM
  1316.               VLM = SECURITY.VLM
  1317.            ;  VLM = NDS.VLM
  1318.               VLM = BIND.VLM
  1319.               VLM = NWP.VLM
  1320.               VLM = FIO.VLM
  1321.               VLM = GENERAL.VLM
  1322.               VLM = REDIR.VLM
  1323.               VLM = PRINT.VLM
  1324.               VLM = NETX.VLM
  1325.               PB BUFFERS = 0
  1326.  
  1327.  
  1328. ┌──────────────────────────────────┐
  1329. │                                  │
  1330. │  Sample Configuration Files for  │
  1331. │          PC/3270 V.3.1           │
  1332. │                                  │
  1333. └──────────────────────────────────┘
  1334.  
  1335. ┌───────────────────────────────────────────────┐
  1336. │ CONFIG.SYS - Windows for Workgroups & PC/3270 │
  1337. └───────────────────────────────────────────────┘
  1338.    DEVICE=C:\WFW\HIMEM.SYS
  1339.    DOS=HIGH
  1340.    DEVICE=C:\DOS\SETVER.EXE
  1341.    DEVICE=C:\WFW\EMM386.EXE NOEMS
  1342.    FILES=30
  1343.    BUFFERS=10
  1344.    DEVICE=C:\WFW\SMARTDRV.EXE /DOUBLE_BUFFER
  1345.    STACKS=9,256
  1346.    LASTDRIVE=Z
  1347.    DEVICE=C:\WFW\IFSHLP.SYS
  1348.    rem DEVICE=C:\LSP\PROTMAN.DOS /I:C:\LSP
  1349.    rem DEVICE=C:\LSP\IBMTOK.DOS
  1350.    DEVICE=C:\LSP\DXMA0MOD.SYS 001
  1351.    rem DEVICE=C:\LSP\DXME0MOD.SYS
  1352.    rem DEVICE=C:\LSP\DXMT0MOD.SYS  ES=5 EST=5 O=N
  1353.    DEVICE=c:\WAL\TAPLF.DOS
  1354.    DEVICEHIGH=c:\WAL\PCMDD.SYS
  1355.  
  1356. ┌─────────────────────────────────────────────────┐
  1357. │ AUTOEXEC.BAT - Windows for Workgroups & PC/3270 │
  1358. └─────────────────────────────────────────────────┘
  1359.    C:\WFW\net start netbind
  1360.    rem \LSP\NETBIND
  1361.    C:\WFW\SMARTDRV.EXE /L /X
  1362.    @ECHO OFF
  1363.    PROMPT $p$g
  1364.    PATH=c:\wal;C:\WFW;C:\WINDOWS;C:\DOS
  1365.    SET TEMP=C:\DOS
  1366.    C:\DOS\MOUSE.COM
  1367.  
  1368. ┌─────────────────────────────────────────────────┐
  1369. │ PROTOCOL.INI - Windows for Workgroups & PC/3270 │
  1370. └─────────────────────────────────────────────────┘
  1371.    [network.setup]
  1372.       version=0x3110
  1373.       netcard=sockdd_mod,1,SOCKDD_MOD,1
  1374.       transport=ms$nwlinknb,NWLINK
  1375.       transport=ms$ndishlp,MS$NDISHLP
  1376.       transport=ms$netbeui,NETBEUI
  1377.       lana0=sockdd_mod,1,ms$netbeui
  1378.       lana1=sockdd_mod,1,ms$nwlinknb
  1379.       lana2=sockdd_mod,1,ms$ndishlp
  1380.  
  1381.    [protman]
  1382.       DriverName=PROTMAN$
  1383.       PRIORITY=MS$NDISHLP
  1384.  
  1385.    [NWLINK]
  1386.       BINDINGS=SOCKDD_MOD
  1387.  
  1388.    [MS$NDISHLP]
  1389.       DriverName=ndishlp$
  1390.       BINDINGS=SOCKDD_MOD
  1391.  
  1392.    [NETBEUI]
  1393.       DriverName=NETBEUI$
  1394.       SESSIONS=32
  1395.       NCBS=32
  1396.       BINDINGS=SOCKDD_MOD
  1397.       LANABASE=0
  1398.       Names=17
  1399.       MaxDatarcv=4168
  1400.       MaxTransmits=6
  1401.       TI=60000
  1402.       T1=10000
  1403.       T2=2000
  1404.  
  1405.    [DXME0_NIF]
  1406.       DriverName=DXME0$
  1407.       Bindings=SOCKDD_MOD
  1408.  
  1409.    [SOCKDD_MOD]
  1410.       DriverName=VLANMAC$
  1411.       LanType="TokenRing"
  1412.       Mode="FLOWS"
  1413.       NetAddress="t400065752399"
  1414.       MaxFrame=1080
  1415.  
  1416.    [COM1]
  1417.       DriverName=COM1MAC$
  1418.       MAXFRAME=1080
  1419.       PCMSUPPORT="yes"
  1420.       MACTYPE="802.5"
  1421.       CONN_TYPE="Switched"
  1422.       TX_FIFO_SIZE=7
  1423.       PCMCIA="no"
  1424.       PORTNAME="COM1"
  1425.  
  1426.    [PDFH_nif]
  1427.       DriverName=PDFH$
  1428.  
  1429. ┌───────────────────────────────────────────────┐
  1430. │ SYSTEM.INI - Windows for Workgroups & PC/3270 │
  1431. └───────────────────────────────────────────────┘
  1432.    [boot]
  1433.    shell=progman.exe
  1434.    network.drv=wfwnet.drv
  1435.    mouse.drv=mouse.drv
  1436.    language.dll=
  1437.    sound.drv=mmsound.drv
  1438.    comm.drv=comm.drv
  1439.    keyboard.drv=keyboard.drv
  1440.    system.drv=system.drv
  1441.    386grabber=vga30.3gr
  1442.    oemfonts.fon=vgaoem.fon
  1443.    fixedfon.fon=vgafix.fon
  1444.    fonts.fon=vgasys.fon
  1445.    display.drv=vga.drv
  1446.    drivers=mmsystem.dll
  1447.  
  1448.    [keyboard]
  1449.    subtype=
  1450.    type=4
  1451.    keyboard.dll=
  1452.    oemansi.bin=
  1453.  
  1454.    [boot.description]
  1455.    keyboard.typ=Enhanced 101 or 102 key US and Non US keyboards
  1456.    mouse.drv=Microsoft, or IBM PS/2
  1457.    language.dll=English (American)
  1458.    system.drv=MS-DOS System
  1459.    codepage=437
  1460.    woafont.fon=English (437)
  1461.    aspect=100,96,96
  1462.    display.drv=XGA (640x480, 16 colors)
  1463.    network.drv=Microsoft Windows Network (version 3.11)
  1464.    secondnet.drv=No Additional Network Installed
  1465.  
  1466.    [386Enh]
  1467.    device=*vpd
  1468.    mouse=*vmd
  1469.    ebios=*ebios
  1470.    woafont=dosapp.fon
  1471.    display=vddvga30.386
  1472.    EGA80WOA.FON=EGA80WOA.FON
  1473.    EGA40WOA.FON=EGA40WOA.FON
  1474.    CGA80WOA.FON=CGA80WOA.FON
  1475.    CGA40WOA.FON=CGA40WOA.FON
  1476.    keyboard=*vkd
  1477.    network=*vnetbios,*vwc,vnetsup.386,vredir.386,vserver.386
  1478.    netheapsize=20
  1479.    device=*vpicd
  1480.    device=*vtd
  1481.    device=*reboot
  1482.    device=*vdmad
  1483.    device=*vsd
  1484.    device=*v86mmgr
  1485.    device=*pageswap
  1486.    device=*dosmgr
  1487.    device=*vmpoll
  1488.    device=*wshell
  1489.    device=*PAGEFILE
  1490.    device=*BLOCKDEV
  1491.    device=*vfd
  1492.    device=*parity
  1493.    device=*biosxlat
  1494.    device=*vmcpd
  1495.    device=*combuff
  1496.    device=*cdpscsi
  1497.    device=vtdapi.386
  1498.    device=vpmtd.386
  1499.    device=vcomm.386
  1500.    device=serial.386
  1501.    device=lpt.386
  1502.    device=ifsmgr.386
  1503.    device=vcache.386
  1504.    device=vshare.386
  1505.    local=CON
  1506.    FileSysChange=off
  1507.    COM3Irq=4
  1508.    COM3Base=03E8
  1509.    COM4Irq=3
  1510.    COM4Base=02E8
  1511.    PagingFile=C:\WFW\WIN386.SWP
  1512.    MaxPagingFileSize=53248
  1513.    netmisc=ndis.386,ndis2sup.386
  1514.    netcard=
  1515.    transport=nwlink.386,nwnblink.386,netbeui.386
  1516.    InDOSPolling=FALSE
  1517.    VPollHeapSize=14
  1518.    device=C:\PCSWIN\VpollD.386
  1519.    device=C:\PCSWIN\VslanD.386
  1520.    ;device=C:\PCSWIN\VvlanD.386
  1521.    device=C:\PCSWIN\VdoshllD.386
  1522.    device=c:\wal\ldvcd.386
  1523.    TimeCriticalSection=8
  1524.  
  1525.    [NonWindowsApp]
  1526.    localtsrs=dosedit,ced
  1527.  
  1528.    [vcache]
  1529.    minfilecache=512
  1530.  
  1531.    [mci]
  1532.    WaveAudio=mciwave.drv
  1533.    Sequencer=mciseq.drv
  1534.    CDAudio=mcicda.drv
  1535.  
  1536.    [drivers]
  1537.    timer=timer.drv
  1538.    midimapper=midimap.drv
  1539.  
  1540.    [DDEShares]
  1541.    CHAT$=winchat,chat,,31,,0,,0,0,0
  1542.    SCHAT$=winchat,chat,,31,,0,,0,0,0
  1543.    CLPBK$=clipsrv,system,,31,,0,,0,0,0
  1544.    HEARTS$=mshearts,hearts,,15,,0,,0,0,0
  1545.  
  1546.    [Network]
  1547.    winnet=wfwnet/00025100
  1548.    multinet=nonet
  1549.    FileSharing=Yes
  1550.    PrintSharing=Yes
  1551.    LogonDisconnected=yes
  1552.    EnableSharing=Yes
  1553.    UserName=USER1
  1554.    Workgroup=WORKGROUP
  1555.    ComputerName=USER1
  1556.    Comment=User1
  1557.    logonvalidated=no
  1558.  
  1559.    [network drivers]
  1560.    netcard=c:\wal\dosvmac.sys,c:\wal\winamac.sys,c:\lsp\dxme0mod.sys
  1561.    transport=ndishlp.sys,*netbeui
  1562.    devdir=C:\WFW
  1563.    LoadRMDrivers=Yes
  1564.  
  1565.    [NWNBLINK]
  1566.    LANABASE=1
  1567.  
  1568.    [Password Lists]
  1569.    *Shares=C:\WFW\Share000.PWL
  1570.  
  1571.  
  1572. 9.3 - For Banyan Vines
  1573.  
  1574. ┌───────────────────────────┐
  1575. │ CONFIG.SYS - Banyan VINES │
  1576. └───────────────────────────┘
  1577.    DEVICE=C:\DOS\HIMEM.SYS
  1578.    DEVICE=C:\WINDOWS\EMM386.EXE NOEMS
  1579.    DOS=HIGH,UMB
  1580.    DEVICE=C:\DOS\SETVER.EXE
  1581.    FILES=30
  1582.    BUFFERS=10
  1583.    STACKS=9,256
  1584.    DEVICE=c:\WAL\protman.dos /I:c:\WAL
  1585.    DEVICEHIGH=c:\WAL\taplf.dos
  1586.    DEVICEHIGH=c:\WAL\dxmj0mod.sys
  1587.    DEVICEHIGH=c:\WAL\DOSVMAC.SYS
  1588.    DEVICE=c:\WAL\WINAMAC.SYS
  1589.    DEVICEHIGH=c:\WAL\PCMDD.SYS
  1590.  
  1591. ┌─────────────────────────────┐
  1592. │ AUTOEXEC.BAT - Banyan VINES │
  1593. └─────────────────────────────┘
  1594.    C:\WINDOWS\SMARTDRV.EXE
  1595.    @ECHO OFF
  1596.    PROMPT $p$g
  1597.    PATH=c;C:\WINDOWS;c:\vines;C:\;C:\DOS
  1598.    SET TEMP=C:\DOS
  1599.    C:\DOS\MOUSE.COM
  1600.    cd vines
  1601.    BAN /nc
  1602.    NDTOKBAN
  1603.    c:\WAL\DOSBIND
  1604.    redirall
  1605.    cd ..
  1606.  
  1607. ┌─────────────────────────────┐
  1608. │ PROTOCOL.INI - Banyan VINES │
  1609. └─────────────────────────────┘
  1610.    [PROTOCOL_MANAGER]
  1611.       DriverName=PROTMAN$
  1612.       Bindings=SOCKDD_MOD
  1613.  
  1614.    [VINES_XIF]
  1615.       DRIVERNAME=NDISBAN$
  1616.       BINDINGS="SOCKDD_MOD"
  1617.       PACEMODE=0
  1618.       LANABASE=0
  1619.       METRIC=90
  1620.  
  1621.    [NETBEUI]
  1622.       DriverName=NETBEUI$
  1623.       Bindings=SOCKDD_MOD
  1624.       NCBS=32
  1625.       Sessions=32
  1626.       Names=17
  1627.       MaxDatarcv=4168
  1628.       MaxTransmits=6
  1629.       TI=60000
  1630.       T1=10000
  1631.       T2=2000
  1632.  
  1633.    [SOCKDD_MOD]
  1634.       DriverName=VLANMAC$
  1635.       LanType="TokenRing"
  1636.       Mode="FLOWS"
  1637.       NetAddress="t4000321D6AB5"
  1638.       MaxFrame=1524
  1639.  
  1640.    [COM1]
  1641.       DriverName=COM1MAC$
  1642.       MAXFRAME=1524
  1643.       PCMSUPPORT="yes"
  1644.       MACTYPE="802.5"
  1645.       CONN_TYPE="Switched"
  1646.       TX_FIFO_SIZE=7
  1647.       PCMCIA="no"
  1648.       PORTNAME="COM1"
  1649.  
  1650.   [PDFH_nif]
  1651.       DriverName=PDFH$
  1652.  
  1653.  
  1654. 9.4 - For LAN Workplace for DOS
  1655.  
  1656. ┌────────────────────────────────────┐
  1657. │ CONFIG.SYS - LAN Workplace for DOS │
  1658. └────────────────────────────────────┘
  1659.    DEVICE=C:\DOS\HIMEM.SYS
  1660.    DEVICE=C:\WINDOWS\EMM386.EXE noems
  1661.    DOS=HIGH,UMB
  1662.    DEVICE=C:\DOS\SETVER.EXE
  1663.    FILES=30
  1664.    BUFFERS=30
  1665.    STACKS=9,256
  1666.    SHELL=C:\COMMAND.COM /E:2000 /P
  1667.    LASTDRIVE=Z
  1668.    DEVICE=C:\DOS\ansi.sys
  1669.    DEVICE=c:\WAL\protman.dos /I:c:\WAL
  1670.    DEVICE=c:\WAL\dxmj0mod.sys
  1671.    DEVICE=c:\WAL\dosvmac.sys
  1672.    DEVICEHIGH=c:\WAL\winamac.sys
  1673.    DEVICEHIGH=c:\WAL\pcmdd.sys
  1674.  
  1675. ┌──────────────────────────────────────┐
  1676. │ AUTOEXEC.BAT - LAN Workplace for DOS │
  1677. └──────────────────────────────────────┘
  1678.    @ECHO OFF
  1679.    PROMPT $p$g
  1680.    path=c:\WAL;c:\doslan;c:\windows;c:\dos;
  1681.    SET TEMP=C:\TEMP
  1682.    LH DOSKEY
  1683.    CALL C:\NET\bin\lanwp.bat
  1684.  
  1685. ┌───────────────────────────────────┐
  1686. │ LANWP.BAT - LAN Workplace for DOS │
  1687. └───────────────────────────────────┘
  1688.    C:\NET\bin\yesno "Do you want to load the networking software? [y/n] "
  1689.    if errorlevel 1 goto noload
  1690.    PATH C:\NET\BIN;%path%
  1691.    C:\NET\nwclient\lsl.com
  1692.    C:\WAL\ODI2NDI
  1693.    c:\WAL\DOSBIND
  1694.    c:\net\nwclient\route
  1695.    tcpip.exe
  1696.    set name=rcp
  1697.    break on
  1698.    :noload
  1699.  
  1700. ┌──────────────────────────────────────┐
  1701. │ PROTOCOL.INI - LAN Workplace for DOS │
  1702. └──────────────────────────────────────┘
  1703.    [PROTOCOL_MANAGE]
  1704.       DriverName=PROTMAN$
  1705.       Bindings=SOCKDD_MOD
  1706.  
  1707.    [NETBEUI]
  1708.       DriverName=NETBEUI$
  1709.       Bindings=SOCKDD_MOD
  1710.       NCBS=32
  1711.       Sessions=32
  1712.       Names=17
  1713.       MaxDatarcv=4168
  1714.       MaxTransmits=6
  1715.       TI=60000
  1716.       T1=10000
  1717.       T2=2000
  1718.  
  1719.    [SOCKDD_MOD]
  1720.       DriverName=VLANMAC$
  1721.       LanType="TokenRing"
  1722.       Mode="Flows"
  1723.       NetAddress=T400010FD0DFA
  1724.       MaxFrame=1514
  1725.  
  1726.    [COM1]
  1727.       MaxFrame=1514
  1728.       MACTYPE="802.5"
  1729.       DRIVERNAME="COM1MAC$"
  1730.       PCMSUPPORT="YES"
  1731.       CONN_TYPE="SWITCHED"
  1732.       PORTNAME="COM1"
  1733.       TX_FIFO_SIZE=7
  1734.  
  1735.    [ODI2NDI_mod]
  1736.       DRIVERNAME=ODI2NDI$
  1737.       BINDINGS=SOCKDD_MOD
  1738.       NetAddress="t400010FD0DFA"
  1739.       TOKEN-RING=YES
  1740.       TOKEN-RING_SNAP=YES
  1741.  
  1742. ┌─────────────────────────────────┐
  1743. │ NET.CFG - LAN Workplace for DOS │
  1744. └─────────────────────────────────┘
  1745.    Link Support
  1746.            Buffers 4 2202
  1747.            MemPool 4096
  1748.  
  1749.    Link Driver SOCKDD_MOD
  1750.            Frame TOKEN-RING_SNAP
  1751.            Protocol IP 800 TOKEN-RING_SNAP
  1752.  
  1753.    Protocol TCPIP
  1754.            ip_router       129.35.16.1
  1755.            ip_netmask      255.255.240.0
  1756.            ip_address      129.35.19.173
  1757.            PATH LANG_CFG   C:\NET\LANG
  1758.            PATH SCRIPT     C:\NET\SCRIPT
  1759.            PATH PROFILE    C:\NET\PROFILE
  1760.            PATH LWP_CFG    C:\NET\HSTACC
  1761.            PATH TCP_CFG    C:\NET\TCP
  1762.  
  1763. <end of file>
  1764.