home *** CD-ROM | disk | FTP | other *** search
/ IBM Presents OS/2 Software Hits 1995 / OS-2_SW_HITS_2ND_EDITION_1995.ISO / i17 / saa014.doc < prev    next >
Text File  |  1995-02-17  |  13KB  |  375 lines

  1. NetWare 1.3B Maintenance                      (SAA014.EXE)
  2. ---------------------------------------------------------------
  3. This package is made up of the following files:
  4.  
  5. SAA014 DOC15LB5 - This document
  6. SAA014 EXE15LB5 - Binary self-extracting file.
  7.  
  8. ---------------------------------------------------------------
  9.  
  10. NOVELL PRODUCT and VERSION: NetWare for SAA 1.3B
  11.  
  12. ABSTRACT:
  13.  
  14. SAA014.EXE & SAA008.EXE, together, are the current patch for
  15. SAA 1.3B and must be used together. The patch is recommended
  16. for all SAA 1.3B sites and all SAA 1.3 sites that have
  17. installed the PTF410 series.  Do Not Apply to COMMEXEC & NWSAA
  18. versions below 1.3.42]  Check Product Options Under "Load
  19. Install" First]  NOTE: SAA008 HAS NOT changed. Please apply
  20. SAA014 & SAA008 before calling Tech Support. If you are using
  21. SAA013 without problems, do not download SAA014.
  22.  
  23. ---------------------------------------------------------------
  24. DISCLAIMER
  25. THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO
  26. NOVELL.  NOVELL MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY
  27. THIS INFORMATION.  HOWEVER, THE INFORMATION PROVIDED IN THIS
  28. DOCUMENT IS FOR YOUR INFORMATION ONLY.  NOVELL MAKES NO
  29. EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS INFORMATION.
  30. ---------------------------------------------------------------
  31.  
  32. SYMPTOM
  33.  
  34. General Symptoms
  35. 1. Not compatible with NetSoft and DCA emulators.
  36. 2. Unexpected disconnects.
  37. 3. Failure to attach with Password Encryption turned on.
  38. 4. Multiple line RUNCMD responses limited to 110 characters.
  39. 5. Problems gathering statistics through SSM.
  40. 6. Problems using the verb CNOS.
  41. 7. If a session was terminated while the DCA emulator was using
  42. mod 5, subsequent users would get 4B? on the OIA line when
  43. trying to get a new session.
  44. 8. Definite response with Pacing ON, caused sense code 200A.
  45. 9. Test frames being sent causing the link to reset.
  46. 10. 3174 X.25 RPQ failure to connect with NWSAA.
  47. 11. Several different state transition errors; event=1 state=5
  48. & event=7 state=7.
  49. 12. Several LU6.2 problems, including send error in recv state
  50. problems.
  51. 13. Failure to respond to a Null XID when configured as a PU
  52. type 2.1 over a SDLC link.
  53.  
  54. Symptoms Related to R3SDLC & SDLCS
  55. 1. Server hang in a multidrop environment, if another device
  56. kept RTS high.
  57.  
  58. 2. RTS toggled to Low even if CSCON was configured to set it
  59. constantly High.
  60.  
  61. 3. Spurious interrupt/missed poll messages.
  62.  
  63. 4. Pressing Attention, during a Logoff could result in a
  64. Profile Unload.
  65.  
  66. 5. Failure to re-establish connection with host.
  67.  
  68. 6. Failure to respond to a DISC from NCP.
  69.  
  70. 7. "DLCI ERROR:unable to attach to a logical board" when
  71. loading both a PU2.0 and a PU2.1 profile to the same board.
  72.  
  73. 8. Failure of link to come up.
  74.  
  75. Symptoms WITH SNALINKS
  76. 1. Even when SNALINKS was configured for Auto Connect, after a
  77. link was downed, the connection might not be brought up
  78. automatically.
  79. 2. Incompatibility with MPR 3.0.
  80.  
  81. Symptoms with SAACOPY
  82. 1. "Unable to open file"
  83.  
  84. 2. Downstream LUs unable to establish host sessions.
  85.  
  86. 3. Unable to copy between a 1.3 and a 1.4 Communication Server.
  87.  
  88. 4. "No more WCM connection"
  89.  
  90. 5. "Error on Attach"
  91.  
  92. 6. After a profile was copied onto a NetWare 4.01 server, an
  93. attempt to run CSCON from the same NetWare drive would cause
  94. the workstation to hang. 7. The use of SAACOPY, then CSCON,
  95. could result in the DOS prompt being changed to "%p". 8.
  96. SAACopy set the wrong model number.
  97.  
  98. Symptoms with AS/400
  99. 1. Unable to access Shared Folders.
  100. 2. Invalid XID messages on the console.
  101.  
  102. Symptoms Related to OS/2
  103. 1. Lack of OS/2 DOS Box support for CSCON.
  104. 2. Problems using OS/2 Connection Manager.
  105.  
  106. Symptom Using Netview
  107. Server crash when NetView issues a REQMS.
  108.  
  109. Symptom using Data Link Switch/Custom link
  110. Errors when session data spanned multiple data blocks.
  111.  
  112. Symptoms When Using MPA Boards
  113. 1. System crash when using MPA driver and PS/2 model 9585.
  114. 2. MPA driver not compatible with servers over 16 meg of RAM.
  115.  
  116. New Features
  117. 1. Compatibility added for the new "LINKSNA", due out in the
  118. near future.
  119. 2. Compatibility added for the new data link switch product.
  120.  
  121. SOLUTION
  122. Apply SAA014 and SAA008
  123.  
  124. Self-Extracting File Name:  SAA014.EXE     Revision:  A
  125.  
  126. Files Included     Size     Date      Time
  127.  
  128. \
  129.   SAA014.TXT         (This File)
  130.      DLM.NLM     107523   11-15-94   10:21a   *599,613,666
  131.      SMA.NLM      28138   03-28-94    2:36p   *582
  132.      WCM.DLL      33309   03-08-94   10:48a   *573
  133.    CMTCP.NLM      39644   12-15-93    9:09a   *553
  134.    CSCFG.EXE     113445   04-18-94   10:07a   *558
  135.    CSCON.EXE      41183   04-18-94   10:05a   *558
  136.    NWSAA.001        855   11-17-94    8:46a   *629,624,610,659
  137.    NWSAA.NLM     367462   11-04-94    3:49p   *637,650,652,629,
  138.                                               624,610,659
  139.    NWSAA.RMV       1839   07-07-94    6:20p   *629,624,610,637,
  140.                                               650,652
  141.    ROUTE.NLM       5033   06-09-94    6:11p
  142.    SDLCS.NLM      40905   04-19-94    3:01p   *590,586,578
  143.   CS_ERR.DAT       9451   02-26-90    6:52p   *588
  144.   CS_MSG.DAT      24812   12-14-89    4:52p
  145.   R3SDLC.LAN      22551   04-29-94    9:18a   *590,586,578
  146.  CS_HELP.DAT       3722   09-01-89   12:00p
  147.  LLC8022.NLM      34606   09-01-94   11:02a   *638,644
  148.  MPASDLC.LAN      10809   08-04-94   11:37a   *622,636
  149.  PBTRACE.NLM       2735   04-19-94    3:00p   *590
  150.  PRODUCT.DEF        434   11-02-94    5:40p   *659
  151.  SAACOPY.EXE     262121   09-26-94    3:55p   *541,646
  152.  SPC_ERR.DAT       9451   02-26-90    6:52p   *646
  153.  SPC_FRM.FRM       1387   10-07-92   11:24a   *646
  154.  SPC_FRM.HLP      67975   10-11-93    5:15p   *541,646
  155.  SPC_MSG.DAT      24812   12-14-89    4:52p
  156.  STRNRTR.EXE      41757   10-22-93    4:39p   *541
  157. AS400PCS.NLM      18642   10-22-93    4:41p
  158. CPIC_SAA.NLM      32756   01-10-94    2:01p   *560
  159. CSCONFRM.HLP       4425   07-23-92    4:26p   *588
  160. CSINSTAL.HLP       2336   03-09-93    6:44p   *629,624,610
  161. CSINSTAL.NLM        802   06-10-93   11:28a   *629,624,610
  162. NOVELLRT.OVL       6678   10-22-93    4:39p   *535
  163. PB_NWSAA.NLM      28622   04-19-94    3:00p   *590
  164. PINSTALL.NLM      87963   06-10-93   11:29a
  165. SPC_HELP.DAT       3722   09-01-89   12:00p   *646
  166.  
  167.  
  168. *Novell internal control number.
  169.  
  170. Installation Instructions:
  171.  
  172. 1. Although there are diferences between SAA014 and SAA013,
  173. they report the same version to the installation program.
  174. Therefore, an attempt to install SAA014 over SAA013, will
  175. result in an error message.  However, if you are running
  176. NetWare for SAA 1.3B with SAA013 without problems, there is no
  177. reason to put SAA014 on top of SAA013.
  178.  
  179. 2. Make sure you have the latest NIC drivers for your system.
  180. They must be ODI 4.0 compliant].
  181.  
  182. 3. If you have not already done so, install the LANDR3.EXE
  183. patch.
  184.  
  185. 4. If you have not already done so, install the STRTL3.EXE
  186. patch.
  187.  
  188. 5. Install SAA014, ONLY IF you have NetWare for SAA 1.3B or
  189. have installed the PTF410 series.
  190.  
  191. 6. Put SAA014.EXE into an empty directory, called SAA014, on a
  192. hard disk or network drive.  Make sure the directory path is
  193. available to the server(s) you are updating.
  194.  
  195. 7. Unzip SAA014.EXE.
  196.                   SAA014  <Enter>
  197.  
  198. 8. Have you ever applied SAA008?  If you have, you are
  199. currently at version 1.3.46.  If you are currently at version
  200. 1.3.46 skip to step #9.  Do NOT apply SAA008 a second time.
  201.  
  202. Put SAA008.EXE into an empty directory, called SAA008, on a
  203. hard disk or network drive.  Make sure the directory path is
  204. available to the server(s) you are updating.
  205.  
  206. 9. Unzip SAA008.EXE.
  207.  
  208.   SAA008  <Enter>
  209.  
  210. 10. Do a CSDOWN so that COMMEXEC will not be running.
  211.  
  212. 11. LOAD Install.
  213.  
  214. 12. Select Product Options.
  215.  
  216. 13. Press <Insert>. You should select the directory path
  217. created above ie, sys:\saa014 or c:\saa014
  218.  
  219. 14. Select server to update.
  220.  
  221. 15. Press <Enter>.
  222.  
  223. 16. Wait for the update to complete.
  224.  
  225. 17. Press <Esc>.  You should see NWSAA 1.3.60
  226.  
  227. 18. If you have never applied SAA008, press <Insert>.select
  228. directory path for SAA008 ie, sys:\SAA008 or c:\SAA008.
  229.  
  230. 19. Select the server to update.
  231.  
  232. 20. Press <Enter>
  233.  
  234. 21. Wait for the update to complete.
  235.  
  236. 22. Press <Esc>.  You should see COMMEXEC 1.3.46.
  237.  
  238. ***]]]
  239. ]]] IMPORTANT NOTE: Never manually copy COMMEXEC.NLM or
  240. NWSAA.NLM into the system.  The install scripts must be used]
  241. If you copy in manually, the version information will be
  242. incorrect.  If you have ever applied an ETF that required
  243. copying NWSAA.NLM into the system directory manually, please
  244. recopy the NWSAA.NLM that was on the system just prior to
  245. installing the ETF, and then be sure the version number under
  246. Product Options for NWSAA is lower than the one in this patch.
  247. If an ETF was applied with an install script, you do not have
  248. to recopy NWSAA.NLM (however, be sure the version you have is
  249. lower than the one in this patch).  If the version number is
  250. equal than or greater than the one to be installed by this
  251. patch, the install will fail.  ]]]******
  252.  
  253. 22. Unload and Reload LLC8022.NLM, (this will load the new
  254. LLC8022.NLM)
  255.  
  256. 23. Reload COMMEXEC.
  257.  
  258. 24. Reload the profile.
  259.  
  260. 25. Copy the new STRNRTR.EXE and NOVELLRT.OVL over any copies
  261. that exist outside of SYS:\SYSTEM\NWSAA\AS400.
  262.  
  263. 26. Read SAACOPY.TXT for instructions on the use of SAACOPY.
  264. Please note that there was a patch to SAACOPY that created an
  265. incorrect directory.  The INCORRECT PATH is
  266. SYS:\SYSTEM\SAACOPY.  Please delete the contents and the
  267. directory.  The CORRECT directory path is
  268. SYS:\SYSTEM\NWSAA\SAACOPY.  SAA014 will install the files here.
  269.  
  270.  
  271. 27. The CONFIG.SYS for the workstation from which you run
  272. SAACOPY must contain FILES=20 (or greater).  If it does not,
  273. you will receive the following error message when you try to
  274. back up or restore SAA service files:
  275.  
  276.   MESSAGE
  277.  
  278.   Unable to Open File
  279.  
  280. 28. If you are using the MPA board:
  281. The new MPA driver uses interrupt 3 and is non-shareable, run
  282. reference setup to make sure no other device uses Interrupt 3]
  283.  
  284. 29. If you are using the MPA board with OS/2:
  285. Load MPASDLC Name=board mode=ns
  286.  
  287. 30. If you will be using 3174 X.25 RPQ, copy the new ROUTE.NLM
  288. to the SYSTEM directory and load it with the GBR option.
  289. (specifies that all General Broadcast frames are to be sent as
  290. All Routes Broadcast Frames.) Note: even if you will not be
  291. using 3174 X.25,  copying the new ROUTE.NLM is advised. (the
  292. same ROUTE.NLM contained in SROUTE.EXE and included here as a
  293. convenience).
  294.  
  295.  
  296. Patch History:
  297.  
  298. SAA014 supersedes SAA001, SAA003, SAA004, SAA007, and SAA013.
  299. SAA001 contained CSMPX.NLM dated 2/17/94, which randomized
  300. CSLIST.  Such randomization is not desirable at many sites.
  301.  
  302. SAA001 and SAA002 superseded PTF 443, PTF 435 and PTF 438.
  303. These files also replace the NetWire file SAACPY.EXE that
  304. introduced the problem of restored downstream LUs being unable
  305. to establish host sessions and PTF 431 that was the first PTF
  306. for SAA 1.3B.
  307.  
  308. SAA008 superseded SAA002.
  309.  
  310.  
  311. Solution Specifics: (for some of the symptoms listed above)
  312.  
  313. GENERAL
  314.  
  315. 1. CMTCP.NLM modified to handle multiple QELs in a single
  316. packet.  This was done for compatibility.
  317.  
  318. 4. RUNCMD responses will now be limited to 220 characters.  If
  319. in excess of 220 characters, will be truncated.  Single line
  320. RUNCMD responses will be broken down into 220 character chunks.
  321.  
  322. 6. When changing the number of sessions (CNOS) from X to Y,
  323. must be at 0 first before the change can be made.
  324.  
  325. 9. DLM.NLM and LLC8022.NLM modified so that test frames will be
  326. turned around once the link is established.
  327.  
  328. 12. Many fixes for LU6.2, including adding sense code for FMH-7
  329. 10086040,CNOS fixes, chaining and bracketing fixes,etc.
  330.  
  331. 13. DLM.NLM modified.
  332.  
  333.  
  334. SOLUTIONS RELATED to R3SDLC & SDLCS
  335.  
  336. 5. R3SDLC and SDLCS were modified so that DTR is not toggled
  337. when SAA receives a disconnect command in a leased line
  338. configuration.
  339.  
  340. 8. SDLCS.NLM modified so that the link will no longer fail to
  341. come up when a DISC immediately follows a SNRM/UA.
  342.  
  343.  
  344. SAACOPY
  345. 4. Connections will now clear.  They had not been, and as new
  346. connections were made the maximum number would be reached.
  347.  
  348. 8. Model numbers will now transfer correctly.
  349.  
  350.  
  351. AS/400
  352. 1. Corrected by adding support for the "query conversation
  353. state" service verb.
  354.  
  355.  
  356. OS/2
  357. 2. WCM.DLL modified.
  358.  
  359.  
  360. USING NETVIEW
  361. DLM.NLM modified so that a server crash will no longer result
  362. from a REQMS resulting in a DLM_GET_STATISTICS or
  363. DLM_RESET_STATISTICS.
  364.  
  365. DATA LINK SWITCH/CUSTOM DATA LINK
  366. Support provided for data spanning multiple data blocks,
  367. instead of being required to remain in one data block.  This
  368. also effects Custom data link configurations as well.
  369.  
  370. ---------------------------------------------------------------
  371. Any trademarks referenced in this document are the property of
  372. their respective owners.  Consult your product manuals for
  373. complete trademark information.
  374. ---------------------------------------------------------------
  375.