home *** CD-ROM | disk | FTP | other *** search
/ IBM Presents OS/2 Software Hits 1995 / OS-2_SW_HITS_2ND_EDITION_1995.ISO / i17 / r210ft.exe / R210FT.TXT < prev    next >
Text File  |  1994-11-18  |  10KB  |  353 lines

  1.  
  2.               NOVELL TECHNICAL INFORMATION DOCUMENT
  3.  
  4. TITLE:              v2.1 NetWare Client for OS/2 Patches
  5. DOCUMENT ID:        TID021339
  6. DOCUMENT REVISION:  A
  7. DATE:               18NOV94
  8. ALERT STATUS:       Yellow
  9. INFORMATION TYPE:   Symptom Solution
  10. README FOR:         R210FT.EXE
  11.  
  12. NOVELL PRODUCT and VERSION:
  13. NetWare Client for OS/2 2.10
  14.  
  15. ABSTRACT:
  16.  
  17. These patches have not been submitted to Novell system test.  THE FUTURE HOME
  18. FOR R210FT.EXE WILL BE NOVLIB/05.  ALL USERS SHOULD REFER TO THIS LIBRARY FOR
  19. FUTURE RELEASES.  Patched NetWare OS/2 utilities are no longer contained in
  20. this file.  A hybrid set of OS/2 utilities from v3.12 NetWare can be found in
  21. OS2UTA.EXE & OS2UTB.EXE, NetWare v3.11 users should consider these utilites. 
  22. NetWare v3.x & v4.x users can get OS2UTP.EXE which contains the latest patched
  23. OS/2 utilities.   These files are found in NOVLIB/06.
  24.  
  25. -----------------------------------------------------------------
  26. DISCLAIMER
  27. THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL.  NOVELL
  28. MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION.  HOWEVER, THE
  29. INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION ONLY.  NOVELL
  30. MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS INFORMATION.
  31. -----------------------------------------------------------------
  32.  
  33. SYMPTOM
  34.  
  35. NETX.EXE would not allow access to modify (write) files when File Scan rights
  36. had been revoked.
  37.  
  38. SOLUTION
  39.  
  40. Apply  NETX.EXE, 85226 bytes,  10-18-94.
  41.  
  42. SYMPTOM
  43.  
  44. NETX.EXE displays all drives that are not NetWare drives, as Local drives,
  45. regardless of whether they are local or mapped by another requester ( IBM's
  46. Lan Requester).
  47.  
  48. SYMPTOM
  49.  
  50. Netx.exe will not load when using a VMB (Virtual Boot Machine) if the Dos
  51. version is greater than  v6.00.
  52.  
  53. SOLUTION
  54.  
  55. Apply  NETX.EXE, 83869 bytes,  08-05-94.
  56.  
  57. SYMPTOM
  58.  
  59. Some DOS applications (ie Norton's SI.EXE) when executed so that output is
  60. redirected to a file on the network would give garbage in the output file.
  61. (ie. SI > F:\TEST.TXT) 
  62.  
  63. SOLUTION
  64.  
  65. Apply NETX.EXE, 83869 bytes, 6-10-94.
  66.  
  67. SYMPTOM
  68.  
  69. The DOS calls "FindFirstFile" and "FindNextFile" do not work properly in a
  70. Private DOS session (VDM).  The problem occurs when trying to do DOS find file
  71. calls inside a loop of DOS find files when the files are on different drives
  72. (one network, one local).  The same program, modified for the same drive (both
  73. network or both local), works correctly.
  74.  
  75. SOLUTION
  76.  
  77. Apply NETX.EXE, 83885 bytes, 6-6-94.
  78.  
  79.  
  80. SYMPTOM
  81.  
  82. SPX applications in VDMs would lose connections.
  83.  
  84. SYMPTOM
  85.  
  86. When running with Pentium or other SL-Enhanced processors IPX activity would
  87. occur even when interrupts had been disabled for the VDM.
  88.  
  89. SOLUTION
  90.  
  91. Apply VIPX.SYS, 53248 bytes, 11-08-94.
  92. Apply DOSVIPX.SYS, 10560 bytes, 11-08-94.
  93.  
  94.  
  95. SYMPTOM
  96.  
  97. Slower than expected performance when accessing network resources.
  98.  
  99. SOLUTION
  100.  
  101. Apply NWREW.SYS, 31764 bytes, 10-28-94.
  102.  
  103. SYMPTOM
  104.  
  105. Network drives cannot be accessed in Global VDMs after the workstation is RPL
  106. booted.
  107.  
  108. SOLUTION
  109.  
  110. Apply NWREQ.SYS, 31764 bytes, 7-21-94.
  111.  
  112. SYMPTOM
  113.  
  114. Error SYS1039 and SYS1040 would occur and connection would be lost with Packet
  115. Burst enabled or if using large packet size (4202).   This would occur when
  116. using a remote link product ( Lan Distance from IBM) and  the NetWare Client
  117. Kit v2.10.   
  118.  
  119. SOLUTION
  120.  
  121. Apply NWREQ.SYS, 31780 bytes, 7-01-94 and  PBURST.EXE   From NOVLIB/05 .
  122.  
  123. SYMPTOM
  124.  
  125. When logging into a server that is not a preferred server and then loading
  126. NWTools, the workstation will be logged out of the server it was just logged
  127. into.
  128.  
  129. SOLUTION
  130.  
  131. Apply NWREQ.SYS, 31780 bytes, 7-01-94 
  132.  
  133. SYMPTOM
  134.  
  135. Customer running IBM Lan Requester v3.0 and NetWare Requester v2.10.  Customer
  136. captures or redirects LPT1 to a NetWare Queue and LPT2 to a Lan Server Queue. 
  137. Then Executes "ENDCAP /ALL". This produces the following Trap in NWREQ.SYS
  138.  
  139.  TRAP D NWREQ:CGROUP: DHL_DecrementFlobalLocks:
  140.  ip=3730, cmp WORD ptr  es:[01fe], +00   es=0 therefore Invalid.
  141.  
  142. SOLUTION
  143.  
  144. Apply NWREQ.SYS, 31380 bytes, 5-26-94.
  145.  
  146. SYMPTOM
  147.  
  148. Receiving errors and a loss of connection when crossing a router when the
  149. NetWare Client is using LIP and Packet Burst.  After they boot up the OS/2
  150. workstation and run login, the following errors occur during the login
  151. process:  
  152.  
  153.  "REQ1040: Requester timed out waiting for reply from server <servername>"
  154.  
  155.  "SYS2070: A program in this session encountered a problem and cannot
  156. continue.
  157.  
  158.  (more info... The system could not demand load the application's segment. 
  159. Capture is in error. For additional details type HELP SYS59244559.)"  
  160.  
  161.  "LOGIN-4.07 760: The utility could not execute the program CAPTURE.  The
  162. program was not found." 
  163.  
  164. SOLUTION
  165.  
  166. Apply NWREQ.SYS, 31380 bytes, 5-26-94 and NWIFS.IFS, 40036 bytes, 5-26-94.
  167.  
  168. SYMPTOM
  169.  
  170. Previous revisions of NWIFS handled a trailing DBCS character containing the
  171. value 0x5C incorrectly.  It assumed that the trailing byte was a directory
  172. separator and would append a '*' to the name in DosFindFirst.
  173.  
  174. Previous revisions of NWIFS would send 512 bytes of data on each DosFindNext
  175. request, causing performance problems on wide-area networks.
  176.  
  177. Revisions of NWIFS since 6-14-94 fixed a problem where file handles inherited
  178. by a child process were prematurely closed if the parent process exits before
  179. the child.  Unfortunately, file locks would not be implicitly released if the
  180. owning process closed the file and another process had the same file open. 
  181. This change has been removed from the IFS.
  182.  
  183. SOLUTION
  184.  
  185. Apply NWIFS.IFS, 40196 bytes, 10-6-94.
  186.  
  187. SYMPTOM
  188.  
  189. Applications that do file and record locking may appear to run slower than
  190. expected.
  191.  
  192. CAUSE
  193.  
  194. The IFS was failing to reset a lock semiphore when it received a failed
  195. condition on a file lock attempt.
  196.  
  197. SOLUTION
  198.  
  199. Apply NWIFS.IFS,  40084 bytes,  08-31-94.
  200.  
  201. SYMPTOM
  202.  
  203. The NWIFS.IFS would match search queries even on files which do not contain
  204. attributes required by the search.  For instance, specifying
  205. "directories-only" in the REXX function SysFileTree did not exclude ordinary
  206. files from the list.
  207.  
  208. SYMPTOM
  209.  
  210. NWIFS.IFS would prematurely close file handles inherited by a child process
  211. when the parent process exits.  For instance, redirecting a child process's
  212. output to a file and calling the 'C' function execv() would cause the child
  213. process to get an invalid file handle error because the parent process had
  214. exited.
  215.  
  216. SOLUTION
  217.  
  218. Apply NWIFS.IFS, 40084 bytes, 6-17-94.
  219.  
  220. SYMPTOM
  221.  
  222. The first network drive (default L:) is not available until the PMSHELL.EXE is
  223. loaded.
  224.  
  225. CAUSE
  226.  
  227. NWDAEMON.EXE  was changed to be a PM application and the first network drive
  228. was not made available until PMSHELL.EXE loads.
  229.  
  230. SOLUTION
  231.  
  232. Apply NWDAEMON.EXE, 36269 bytes, 5-26-94.
  233.  
  234. SYMPTOM
  235.  
  236. SPX applications would hang.
  237.  
  238. CAUSE
  239.  
  240. Previous revisions of SPX did not check for an illegal datastream type in an
  241. ECB submitted to SendSequencedPacket().  SPX now returns the SPX_BAD_PACKET
  242. error code in this situation.
  243.  
  244. SYMPTOM
  245.  
  246. SPX was sending duplicate data frames on wide area or slower networks, the SPX
  247. parameter SEND TIMEOUT used in the NET.CFG did not function.
  248.  
  249. CAUSE
  250.  
  251. The SEND TIMEOUT parameter in NET.CFG now defaults to 500 milliseconds, with a
  252. minimum of 100 msec and a maximum of 6000 msec.  This is added to the round
  253. trip time and averaged with the current retry delay if no timeout occurs. 
  254. When sending a retry, the current retry delay is increased by 50% for each
  255. retry up to a maximum of 6 seconds.  Send retries are now always dynamic. 
  256. Instead of returning an A400h error without aborting the connection, a send
  257. timeout now returns A3EDh (connection aborted) and aborts the connection.
  258.  
  259. SOLUTION
  260.  
  261. Apply SPX.SYS, 15540 bytes, 09-02-94.
  262.  
  263.  
  264. SYMPTOM
  265.  
  266. Named Pipes communication in a VDM would fail shortly after a DOS open was
  267. communicated to the Named Pipe server.
  268.  
  269. SOLUTION
  270.  
  271. Apply NMPIPE.SYS, 17792 bytes, 11-11-94.
  272.  
  273.  
  274. SYMPTOM
  275.  
  276. VDMs on RPL (Remote Program Load) workstations will only show 588k bytes of
  277. available memory.
  278.  
  279. CAUSE
  280.  
  281. MINI.IFS was allocating real memory and not releasing it.
  282.  
  283. SOLUTION
  284.  
  285. Apply MINI.IFS, 8673 bytes, 6-23-94.  The MINI.IFS is used ONLY with Remote
  286. Program Load.
  287.  
  288.  
  289. SYMPTOM
  290.  
  291. WINOS2 SPX Database client application "Forest & Trees" would get sys3176
  292. errors after multiple queries.  NWIPXSPX.DLL was not freeing resources
  293. properly. In WINOS2 session if an attempt was made to make an SPX connection
  294. to a database server that was not available the WINOS2 session would hang. 
  295.  
  296. SOLUTION
  297.  
  298. Apply NWIPXSPX DLL, 38736 bytes, 6-21-94.
  299.  
  300. SYMPTOM
  301.  
  302. 1.  Error "NWTOOLS-4.10-62 : The send command has failed" occurs if you try to
  303. send a message to more that 64 users. 
  304.  
  305. 2.  Nwtools will setup or capture ports LPT4-LPT9, but will not reload or
  306. setup these ports when loading the *.NWS files.          
  307.  
  308. SOLUTION
  309.  
  310. Apply NWTOOLS.EXE   565909 bytes, 7-05-94.
  311.  
  312. Self-Extracting File Name:  R210FT.EXE     Revision:  A
  313.  
  314. Files Included     Size     Date      Time
  315.  
  316. \
  317.   R210FT.TXT         (This File)
  318.      SPX.SYS      15540   09-02-94   10:47a
  319.     MINI.IFS       8673   06-23-94    3:13p
  320.     NETX.EXE      85226   10-18-94    3:19p
  321.     VIPX.SYS      53248   11-08-94    4:46p
  322.    NWIFS.IFS      40196   10-06-94    4:16p
  323.    NWREQ.SYS      31764   10-28-94    2:52p
  324.   NMPIPE.SYS      17792   11-11-94   11:45a
  325.  DOSVIPX.SYS      10560   11-08-94    4:46p
  326.  NWTOOLS.EXE     565909   07-05-94    2:45p
  327. NWDAEMON.EXE      36269   05-26-94    3:10p
  328. NWIPXSPX.DLL      38736   06-21-94    3:02p
  329.  
  330.  
  331. Installation Instructions:
  332.  
  333. * Create a directory called INSTALL$.NEW under \NETWARE.  Copy all files into
  334. \NETWARE\INSTALL$.NEW and reboot.
  335.  
  336. * NWIPXSPX.DLL will need to be manually copied to C:\OS2\MDOS\WINOS2\SYSTEM.
  337.  
  338. * MINI.IFS should be manually copied to the SYS:RPL2 subdir on your NetWare
  339. server if you are using Remote Program Load.
  340.  
  341. * It is a good idea to make sure you have backups of all files being replaced.
  342.  
  343.  
  344. -----------------------------------------------------------------
  345. Any trademarks referenced in this document are the property of their
  346. respective owners.  Consult your product manuals for complete trademark
  347. information.
  348. -----------------------------------------------------------------
  349.  
  350.  
  351.  
  352.  
  353.