IBM Presents OS/2 Software Hits 1995/OS-2_SW_HITS_2ND_EDITION_1995.ISO/i17/os2utb.exe/OS2PUB1/SYSCON.HLP

Novell Help Librarian | 1991-09-05 | 98KB | 1,935 lines

Novell Help Librarian Data File Version 1.00
COPYRIGHT (c) 1985 by Novell, Inc.  All Rights Reserved.
 Available Topics                   Help 1 of 7
  Use SYSCON to examine or change accounting,
 file server, group, supervisor, or user
 information.
 The following screens describe these topics.
 For a list of function keys, press Help <F1>
 again.
 Available Topics                   Help 2 of 7
  Accounting
     Enables the server to charge users for
     resources. Some earlier versions of
     Netware don't support accounting. You can:
 Install accounting.
 Modify services being charged for and the
     rate being charged.
 See what servers can charge for services.
 Available Topics                   Help 3 of 7
  Change Current Server
     You can:
 List the servers you are logged in to.
 Log in to additional servers.
 Log out of additional servers.
 Select the current server.
 Change to a different user on a server
     you are attached to if it is not your
     default server.  H
 Available Topics                   Help 4 of 7
  File Server Information
     You can:
 List servers attached to your network.
 View information about the configuration
     of a server.
 View the number of users presently
     attached to a server.
 See what version of NetWare a server is
     running.l
 Available Topics                   Help 5 of 7
  Group Information
     You can:
 List the groups on a server.
 Examine information about each group.
 Change the information (with Supervisor
     rights).
 Available Topics                   Help 6 of 7
  Supervisor Options
     Brings up a menu of options available if
     you have Supervisor rights.
     The options depend on what level of
     NetWare the server is running.
 Available Topics                   Help 7 of 7
  User Information
     You can:
 List users on a server.
 View information about each user.
 Change the information (with Supervisor
     rights).
 Known NetWare Servers              Help 1 of 1
  These are the servers on your network. For
 information about a server, highlight the
 server name and press <Enter>.
 File Server Information            Help 1 of 5
  This is information about the server. The
 information is explained below.
 Server Name
     The name of the server.
 Netware Version
     The version of NetWare the server is
     using.$
 File Server Information            Help 2 of 5
  System Fault Tolerance (v2.10 and above)
     The level of SFT on the server.
 Transaction Tracking
     Shows whether the server supports TTS
     (Transaction Tracking System) recovery for
     database files.
 File Server Information            Help 3 of 5
  Connections Supported
     The maximum number of users that can log
     at one time.
 Connections in Use
     The number of users logged in.
 Volumes Supported
     The maximum number of disk volumes the
     server can support.
 File Server Information            Help 4 of 5
  Network Address
     The address of the network on which the
     server is located.
 Node Address
     The address of the node where the server
     resides.
 File Server Information            Help 5 of 5
  If you are a Supervisor on this server, you
 see the following:
 Serial Number
     The application number of the server.
 Application Number
     The serial number of some network
     applications. Contact your reseller for
     more information.
 User Names                            Help 1 of 1
  These are users on the server. For information
 about a user, highlight the user's name and press
 <Enter>. With Supervisor rights, you can
 <Insert>      Add a user.
 <Delete>      Remove a user.
 Modify <F3>   Rename a user.
 Mark <F5>     Change some information for several
               users at the same time. Use <F5> to
               mark each user you want changed,
               then press <Enter>.
 Delete User            Help 1 of 1
  To delete this user, select Yes.X
 User Information                   Help 1 of 6
  This is the information about this user. A
 brief description of each option follows.
 The options that appear depend on the rights
 you have, the user you are examining, and the
 features the server supports.
 Account Balance
     Shows the user's account balance and
     credit limit.
 User Information                   Help 2 of 6
  Account Restrictions
     Shows restrictions on the user's account.
 Change Password
     Allows you to change your password.
 Full Name
     Shows the user's full name.
 Groups Belonged To
     Lists the groups the user belongs to.'
 User Information                   Help 3 of 6
  Intruder Lockout Status
     Shows the intruder lockout status for this
     user's account.
 Login Script
     Lets you view and edit the user's login
     script.
 Managed Users and Groups
     Shows users and groups the user manages.
 User Information                   Help 4 of 6
  Managers
     Shows the user's managers.
 Other Information
     Shows the last time the user logged in,
     the amount of disk space the user is
     using, the user's bindery ID number, etc.
 Security Audit Control (2.20+, SUPERVISOR)
     Shows the user's active security audit
     options.C
 User Information                   Help 5 of 6
  Security Equivalences
     Lists users and groups that the selected
     user is security equivalent to.
 Station Restrictions
     Shows what network addresses the user can
     log in from.
 Time Restrictions
     Shows the times the user can log in.
 User Information                    Help 6 of 6
  Trustee Directory Assignments
     Lists directories where the user's trustee
     rights have been granted or revoked.
 Trustee File Assignments (3.x)
     Lists files where the user's trustee
     rights have been granted or revoked.
 Volume/Disk Restrictions
     Lists disk space restrictions for a volume.
 Workgroup Managers                 Help 1 of 1
  These users are workgroup managers. With
 Supervisor rights, you can
 <Insert>       Add users to the list
 <Delete>       Remove users from the list
 Supervisor Options                 Help 1 of 5
  Supervisor options depend on the features of
 your system. They are available only to users
 with Supervisor rights.
 The system default is set so accounts have no
 expiration date, connection limitations,
 password restrictions, or disk space
 limitations.
 An explanation of these options follows.p$
 Supervisor Options                 Help 2 of 5
  Default Account Balance/Restrictions
     Lets you view and change new user security
     restrictions and accounting defaults.
 Default Time Restrictions
     Lets you view and change the default time
     restrictions for new users.

 Edit System AUTOEXEC File
     Lets you edit the system AUTOEXEC file.
 Supervisor Options                 Help 3 of 5
  Edit System SERVER.CFG File (2.x servers)
     Lets you edit the system SERVER.CFG file.
 File Server Console Operators
     Lets you view and modify the list of users
     and groups authorized to run the file
     server console from a station.
 Supervisor Options                 Help 4 of 5
  Intruder Detection/Lockout
     Lets you see if intruder detection is
     activated. Also lets you specify criteria
     for detecting and dealing with intruders.
 Security Audit Control (2.20+)
     Lets you view and change the default
     security audit options for new users and
     the security audit options for unknown
     objects.
 Supervisor Options                 Help 5 of 5
  System Login Script
     Lets you view and change the system login
     script.
 View File Server Error Log
     Lets you view the errors that are
     recorded and clear the error log.
 Workgroup Managers
     Lets you view, add, and delete workgroup
     managers.
 Accounting                         Help 1 of 3
  These are accounting options. With Supervisor
 rights you can change the information.
 Accounting Servers
     Shows servers that charge for services.
 Blocks Read Charge Rates
     Shows if the server is charging for data
     read and the rate being charged.
 Accounting                         Help 2 of 3
  Blocks Written Charge Rates
     Shows if the server is charging for             writing blocks of information to disk and
     the rate being charged.
 Connect Time Charge Rates
     Shows if the server is charging for the
     amount of time that users are connected to
     it. Shows the rate being charged.
 Accounting                         Help 3 of 3
  Disk Storage Charge Rates
     Shows if the server is charging for the
     amount of data stored on its disk drives.
     Shows the rate charged.
 Service Requests Charge Rates
     Shows if the server is charging for the
     number of requests sent to it from a
     station. Shows the rate charged.
 Select Account Server Type         Help 1 of 1
  To authorize a server to charge for services,
 select the servername.
 Full Name                          Help 1 of 1
  Type the full name of the user or group; then
 press <Enter>.
 If the user or group already has a full name,
 use <Backspace> to delete it; then type the
 new name.
 To cancel changes, press Cancel <F7>.
 Insert New User Name   Help 1 of 1
  Enter the name of the new user.
 Rename Existing User               Help 1 of 1
  To rename a user, delete the user's old name;
 then type the new name and press <Enter>.
 View User's Full Name              Help 1 of 1
  This is the full name of the user or group.
 Other Information                  Help 1 of 3
  This is other information about this user or
 group:
 Last Login
     The last date the user logged in. Appears
     only when you are getting information
     about a user. If the user has never
     logged in, "Unknown" appears.
 Other Information                  Help 2 of 3
  File Server Console Operator
     Shows if the user or group can perform
     file server console functions from a
     station. Appears if your NetWare version
     supports file server console features.
 User ID (or Group ID)
     The bindery ID number of the user or
     group.
 Other Information                  Help 3 of 3
  Maximum Disk Space
     The maximum amount of disk space that the
     user can use, in kilobytes. If the user
     has no maximum, "Unrestricted" appears.
 Disk Space in Use
     The amount of disk space being used by
     files owned by the user, in kilobytes.
 Set User Information               Help 1 of 2
  You can change information for users that are
 marked. The options are described below.
 Account Balance
     Lets you change the account balance and
     credit limit.
 Account Restrictions
     Lets you change the account restrictions.
 Set User Information               Help 2 of 2
  Security Audit Control (2.20+, SUPERVISOR)
     Lets you modify active security audit
     options of the users (not individually).
 Station Restrictions
     Lets you specify what stations the users
     can log in to.
 Time Restrictions
     Lets you change the times of the week when
     users can log in.
 Confirm Logout From Server         Help 1 of 1
  To log out from this server, select Yes.
 Charge Rate                       Help 1 of 1
  Select the charge rate you want to apply
 during the selected time period.
 If the charge rate you want is not shown,
 select the "Other Charge Rate."
 If you do not want to change the charge rate,
 press <Escape>.
 Login Time Must Be Allowed         Help 1 of 1
  You can set time restrictions so the user
 can't log in.
 Use an asterisk (*) to mark the time when the
 user can log in.
 If you don't want the user to log in, disable
 the account.
 No Station Restrictions            Help 1 of 1
  This account has no station restrictions.
 This user can log in from any station.
 Only the Supervisor can restrict what stations
 a user can log in from.
 Station Restrictions               Help 1 of 1
  These are network addresses where the user
 can log in. Addresses are shown as a network
 number and a node number.
 If the list is empty, the user can log in from
 any station.
 You can also allow the user to log in from any
 node on a specified network.
 Invalid Network Address            Help 1 of 1
  You entered a bad network address.
 Check the address of the station you want this
 user to log in from and enter the correct
 address.
 Use a network address between 1 and FFFFFFFE.
 Security Equivalences              Help 1 of 1
  These are users and groups this user is
 security equivalent to.
 Other Users and Groups             Help 1 of 1
  These are users and groups this user is not
 security equivalent to.
 To make the user security equivalent to a user
 or group, highlight the user or group and
 press <Enter>.
 To make the user security equivalent to more
 than one user or group, mark the users with
 Mark <F5>; then press <Enter>.
 User Membership Information        Help 1 of 1
  These are the groups this user belongs to.
 Other Groups                        Help 1 of 1
  These are groups that the current user is not
 a member of.
 To add the user to a group, highlight the
 group and press <Enter>.
 To add the user to several groups, mark the
 groups using Mark <F5> key, then press <Enter>.
 Directory Assignments              Help 1 of 1
  These are directories where the user's or
 group's trustee rights have been granted or
 revoked.
 (Trustee rights extend to each subdirectory of
 the directory in which they are declared,
 unless they are changed in the subdirectory.)
 Granted Trustee Rights             Help 1 of 1
  These rights are granted to the user or group
 in this directory or file. You can:
 <Insert>  Grant additional rights
 <Delete>  Revoke the highlighted right. To
           revoke several rights, mark each
           using <F5> and press <Delete>.
 Other Trustee Rights               Help 1 of 1
  These rights have not been granted to the
 user or group in this directory or file. To
 grant a right, select the right and press
 <Enter>.
 All Nodes Are Allowed             Help 1 of 1
  You already specified that the user can log
 in from all nodes on this network.
 To limit the user to specific nodes, delete
 the entry that allows all nodes, or specify
 the other network's address where the user is
 to be limited.
 Existing Subdirectories            Help 1 of 1
  These are the subdirectories of the volume
 or directory you have specified.
 Select the subdirectory that is part of the
 path leading to the directory where you want
 to make the user or group a trustee. Then
 press <Enter>.
 Duplicate Station Restriction     Help 1 of 1
  The address you entered is already in the
 list of addresses that the user can log in
 from.
 You cannot enter the same address in the list
 more than once.
 Group Names                        Help 1 of 1
  These are groups on the server. For
 information about a group, select it.
 With Supervisor rights, you can
 <Insert>    Add a new group.
 <Delete>    Delete the highlighted group.
 Modify <F3> Rename the highlighted group.
 New Group Name                     Help 1 of 1
  Enter the name of the group you want to
 create.
 Group Name                         Help 1 of 1
  To replace the group name, delete the group's
 old name, type a new name and press <Enter>.
 Group Information                  Help 1 of 4
  This is information about the selected group.
 The options are described below.
 Full Name
     Displays the group's full name.
 Member List
     Lists the users that belong to this group.QR
 Group Information                  Help 2 of 4
  These options appear if you belong to the
 group or have Supervisor rights on the server.
 Managed Users And Groups
     Shows the users and groups that this group
     is an account manager for.
 Managers
     Shows the users and groups that manage
     this group.,T
 Group Information                  Help 3 of 4
  Other Information
     Shows the group ID number. If the server
     supports virtual console features, shows
     whether the group has console operator
     rights.
 Security Audit Control (2.20+, SUPERVISOR)
     Allows modification of the active security
     audit options of group members (by list of
     marked users, not by group membership).
 Group Information                  Help 4 of 4
  Trustee Directory Assignments
     Lists the trustee rights the group has in
     directories on the server.
 Trustee File Assignments (3.x servers only)
     Lists trustee rights the group has for
     files in this directory.
 Existing Members                   Help 1 of 1
  These are the users that belong to this group.
 Other Users                        Help 1 of 1
  These users are not members of the group. To
 add a user, highlight the user and press
 <Enter>.
 To add more than one user, mark each using
 Mark <F5>, then press <Enter>.
 Delete Group                       Help 1 of 1
  To delete the highlighted groups from this
 server, select Yes.
 Delete User                        Help 1 of 1
  To remove the highlighted users from the
 selected group, answer Yes.
 Delete Trustee From Directory      Help 1 of 1
  To delete this trustee from the directory,
 select Yes.
 When a trustee is deleted from a directory,     the trustee's rights revert to the rights the   trustee has in the parent directory.
 If no trustee rights are in the parent
 directory, the trustee no longer has rights.
 Delete User from Group             Help 1 of 1
  To delete the user from these groups, select
 Yes.
 Delete Security Equivalences       Help 1 of 1
  To delete the user's security equivalences to
 the highlighted users and groups, select Yes.
 Bad Node Address                   Help 1 of 1
  You entered a bad node address. Check the
 address of the station you want this user to
 log in from and enter that address.
 Use a node address between 0 and FFFFFFFFFFFE.
 Supervisor Station Restriction     Help 1 of 2
  Station restrictions are enforced on the
 SUPERVISOR account.
 If you list invalid addresses where the
 Supervisor can log in, the Supervisor can
 never log in again.
 To help prevent you from making this mistake,
 SYSCON checks to see that you can log in from
 the station you are on right now.
 Supervisor Station Restriction     Help 2 of 2
  Check the addresses you entered to make sure
 they are correct. If they are not, delete the
 incorrect entries and re-enter them.
 If they are correct but this station is not
 included, either delete all the entries or add
 this station temporarily; then go to one of
 the stations you want the supervisor to log in
 from and correct the list.
 Full Name                          Help 1 of 1
  No full name has been defined for this user
 or group. (Only the supervisor can define a
 full name.)
 User Already Exists             Help 1 of 1
  A user by that name already exists. Each
 user must have a unique name.
 Cannot Delete SUPERVISOR  Help 1 of 1
  User SUPERVISOR cannot be deleted.
 Cannot Rename SUPERVISOR  Help 1 of 1
  User SUPERVISOR cannot be renamed.
 Log In to Server                   Help 1 of 1
  Your station is already attached to eight
 servers. (A station cannot be attached to more
 than eight servers at a time.)
 You must log out of a server before you can
 log in to another.
 Accounting Not Supported          Help 1 of 1
  The version of NetWare running on this
 server doesn't support accounting.
 To use accounting, upgrade to a version that
 supports accounting.
 Wrong Accounting Version          Help 1 of 1
  This version of SYSCON doesn't support the
 version of accounting running on this server.
 You have probably run an incorrect version of
 SYSCON. Run the version of SYSCON that came
 with your file server software.
 Accounting Not Installed           Help 1 of 1
  Accounting has not been installed on this
 server. You need Supervisor rights to install
 accounting.
 File Server Cannot Charge           Help 1 of 1
  The server is no longer enabled to charge for
 file service or disk storage service.
 To enable the server to charge for services,
 select "Accounting Servers" and press <Insert>.
 User Is Already a Trustee          Help 1 of 1
  You cannot add the user or group as a trustee
 in the directory. It is already a trustee.
 To change the user or group's trustee rights
 in the directory, return to the "Trustee
 Directory Assignments" screen.
 Select the directory where the user or group
 is a trustee and press Modify <F3>, then press
 <Insert> or <Delete> to add or change existing
 rights.
 Volume Does Not Exist              Help 1 of 1
  The trustee wasn't added. A nonexistent
 volume was specified in the directory path.
 To list the server's volumes, use <Backspace>
 to erase the directory path, then press
 <Insert> and select a volume.
 Add Trustee                       Help 1 of 1
  You entered an incorrect directory path. A
 directory path consists of a volume name, a
 colon, and a list of directory names.
 Press <Insert> to list all subdirectories of
 the path you entered.
 Directory names must be separated by a slash
 (/) or a backslash (\) and can be 14
 characters long.
 Create New User                    Help 1 of 1
  When users are created, they are normally
 added to group EVERYONE.
 An error occurred when the system tried to add  the user to group EVERYONE.
 Check to see if group EVERYONE was deleted.
 Add Group                           Help 1 of 1
  A group by that name already exists. Each group
 must have a unique name.
 Read Login Script for User         Help 1 of 1
  To access another user's login script, use
 <Backspace> to delete the current user's name,
 type the name of the user whose login script
 you want to access, and press <Enter>.
 To see a list of users, press <Insert>.cr
 User Login Script                  Help 1 of 6
  The user login script specifies actions that
 occur when the user logs in.
 Each login script command must be written on
 its own line. Blank lines are ignored.
 Login script commands and their variables
 appear on the following screens.
 User Login Script                  Help 2 of 6
  You can use the following commands:
 BREAK       DRIVE       MACHINE NAME=   WRITE
 COMSPEC=    #(EXEC)     MAP
 DOS BREAK   FDISPLAY    PAUSE
 DOS SET     IF...THEN   REMARK
 For an explanation of these commands, type
 HELP LOGIN SCRIPT COMMANDS <Enter> at the DOS
 prompt.qu
 User Login Script                  Help 3 of 6
  Identifiers
     Identifiers represent text information
     that varies. For example, DAY_OF_WEEK
     represents the current day of the week
     (i.e., Monday).
     Identifiers must be in all capitals.
     Identifiers are listed on the next
     screens.Mw
 User Login Script                  Help 4 of 6
  Identifier     Text Value (must be in
                             quotation marks)
 HOUR           1 to 12
 HOUR24         00 to 23
 MINUTE         00 to 59
 SECOND         00 TO 59
 AM_PM          am or pm
 MONTH          01 to 12
 MONTH_NAME     June, May, etc.
 User Login Script                  Help 5 of 6
  Identifier     Text Value
 DAY            01 TO 31
 YEAR           1983, 2016, etc.
 DAY_OF_WEEK    Monday, Tuesday, etc.
 NDAY_OF_WEEK   1 to 7  (1=Sunday)
 LOGIN_NAME     User's login name
 FULL_NAME      User's full name
 STATION        Station number
 User Login Script                  Help 6 of 6
  Identifier      Text Value
 GREETING_TIME   Morning, Afternoon, or Evening
 NEW_MAIL        Yes or No
 OS              MSDOS
 OS_VERSION      V2.11 or V3.00
 MACHINE         IBM PC, Victor9000, etc
 SHELL_TYPE      Shell type number
 P_STATION       Physical station number
 SMACHINE        Short machine name
 Login Script                       Help 1 of 1
  These are the users on the server. To access
 a user's login script, highlight the name of
 the user and press <Enter>.
 Read Login Script for User         Help 1 of 1
  To copy a user's login script to the selected
 user, use <Backspace> to delete the selected
 user's name from the "Read Login Script for
 User" entry box.
 Then type the name of the user you want to
 copy the script from, or press <Insert> to
 select a name from the list.
 System Login Script                Help 1 of 6
  The system login script specifies actions
 that occur for all users when they log in.
 Each login script command must be written on
 its own line. Blank lines are ignored.
 Login script commands and their variables
 appear on the following screens.
 Login Script Commands              Help 2 of 6
  You can use the following commands:
 BREAK       DRIVE       MACHINE NAME=   WRITE
 COMSPEC=    #(EXEC)     MAP
 DOS BREAK   FDISPLAY    PAUSE
 DOS SET     IF...THEN   REMARK
 For an explanation of these commands, type
 HELP LOGIN SCRIPT COMMANDS <Enter> at the DOS
 prompt.
 Login Script Commands              Help 3 of 6
  Identifiers
     Identifiers represent text information
     that varies. For example, DAY_OF_WEEK
     represents the current day of the week
     (i.e., Monday).
     Identifiers must be in all capitals.
     Identifiers are listed on the next
     screens.m
 Login Script Identifiers           Help 4 of 6
  Identifier     Text Value (must be in
                             quotation marks)
 HOUR           1 to 12
 HOUR24         00 to 23
 MINUTE         00 to 59
 SECOND         00 TO 59
 AM_PM          am or pm
 MONTH          01 to 12
 MONTH_NAME     June, May, etc.
 Login Script Identifiers           Help 5 of 6
  Identifier     Text Value
 DAY            01 TO 31
 YEAR           1983, 2016, etc.
 DAY_OF_WEEK    Monday, Tuesday, etc.
 NDAY_OF_WEEK   1 to 7  (1=Sunday)
 LOGIN_NAME     User's login name
 FULL_NAME      User's full name
 STATION        Station number
 Login Script Identifiers           Help 6 of 6
  Identifier      Text Value
 GREETING_TIME   Morning, Afternoon, or Evening
 NEW_MAIL        Yes or No
 OS              MSDOS
 OS_VERSION      V2.11 or V3.00
 MACHINE         IBM PC, Victor9000, etc
 SHELL_TYPE      Shell type number
 P_STATION       Physical station number
 SMACHINE        Short machine name
 Supervisor Only                    Help 1 of 1
  Only users with supervisor rights can use
 this option.
 Groups Belonged to                 Help 1 of 1
  These are groups this user belongs to. You can
 <Insert>  Add the user to more groups.
 <Delete>  Delete the user from a group.
 Security Equivalences              Help 1 of 1
  These are users and groups this user is
 security equivalent to.
 Modify security equivalences by using
 <Insert>, <Delete>, or Mark <F5> and <Delete>.
 Group Members                      Help 1 of 1
  These users belong to the selected group. You
 can:
 <Insert>     Add users to the group.
 <Delete>     Delete the highlighted users.
 Trustee Directory Assignments      Help 1 of 2
  These are directories in which this user's or
 group's trustee rights have been granted or
 revoked.
 (Trustee rights extend to each subdirectory of
 the directory where they are granted, unless
 they are changed in the subdirectory.)
 Trustee Directory Assignments      Help 2 of 2
  Use these keys to make changes:
 <Insert>  Declare user's or group's trustee
           rights in a directory.
 <Delete>  Remove trustee rights declaration.
 <Enter>   Change rights granted or revoked in
           the highlighted directory.
 Confirm Revoke Trustee Rights      Help 1 of 1
  To revoke marked trustee rights in this
 directory for this user, select Yes.
 Create New Directory              Help 1 of 1
  The directory you specified does not exist.
 If you misspelled the directory name, press
 <Backspace> to erase it, then correct the
 spelling.
 If Yes, the directory will be created and the
 user will have trustee rights there.
 Default Time Restrictions          Help 1 of 2
  Specify the default time restrictions for new
 user accounts.
 Time restrictions specify what times of         the day a user can log in.
 The week is divided into half-hour time
 blocks. If the user is allowed to log in
 during a block, the block is marked with an
 asterisk (*).
 Default Time Restrictions          Help 2 of 2
  The following keys affect login restrictions.
 <Insert> or the asterisk (*)
    Allows the user to log in.
 <Delete> or space
    Doesn't allow the user to log in.
 <Enter>
    Reverses current settings.
 View Error Log                     Help 1 of 1
  These are all errors logged since the last
 time the error log file was cleared.
 Workgroup Manager Candidates       Help 1 of 1
  These users aren't workgroup managers. To add
 a workgroup manager, highlight the user's
 name, then press <Enter>.
 To add several users, mark each using <F5>,
 then press <Enter>.
 Delete Workgroup Managers          Help 1 of 1
  To revoke the selected user's or group's
 rights to create user accounts, groups, and     queues, select Yes.
 Delete Workgroup Managers          Help 1 of 1
  To revoke the selected user's or group's
 rights to create new user accounts, groups,
 and queues, select Yes.
 Managers                          Help 1 of 1
  These users and groups are workgroup managers
 of the selected user or group. With
 Supervisor rights, you can
 <Insert>  Add users to the list.
 <Delete>  Remove users from the list.
 Insufficient Rights                Help 1 of 1
  You tried to add or delete a user or group
 over which you are not a workgroup manager.
 If you need manager rights over this user or
 group, ask the system supervisor to grant
 them.
 Managed Users and Groups           Help 1 of 2
  These are users and groups this user or group
 manages.
 A group manager can modify the user's name,
 password, account restrictions, account
 balance, groups, security equivalences, and
 login script.
 Managed Users and Groups           Help 2 of 2
  With Supervisor rights you can
 <Insert>    Add to the list.
 <Delete>    Delete from the list.
 Mark <F5>   Delete several users. Mark each
             user and press <Delete>.
 Revoke Right to Manage User       Help 1 of 1
  If you no longer want this user to manage
 the selected user or group, select Yes.
 Grant Right to Manage Users         Help 1 of 1
  These users and groups are not managed by the
 selected user or group.
 To grant the right to manage a user or group,
 select a user or group name.
 To grant the right to manage several users,
 mark the names using <F5>, then press <Enter>.
 No Other Accounting Servers        Help 1 of 1
  To charge for services, a file server must
 have an account on the server it logs in to.
 There are no accounts for any servers that
 have not been authorized to charge.
 SYSCON knows about server accounts for Job
 Servers, Gateways, Print Servers, Archive
 Servers, SNA Gateways, and Remote Bridges.
 More than 20 Charges Changes       Help 1 of 1
  You have more than 20 charge rate entries.
 Consolidate rate changes so you don't have
 more than 20 entries.
 One entry can change the rate for one or more
 days. Also, each time of the day that a rate
 change occurs uses at least one entry.
 More Than 20 Disk Charge Entries   Help 1 of 1
  You have more than 20 disk charge entries.
 Consolidate the times and rates charged for
 disk storage so that it does not take more
 than 20 entries to store the charge times.
 One entry can change the rate for one or more
 days.  Also, each time of the day that a rate
 change occurs uses at least one entry.
 No Errors in Log File              Help 1 of 1
  No errors have been recorded in the server
 error log file since the last time the error
 log was cleared.
 Log Out From Server                Help 1 of 1
  To log out of one server, highlight the
 server's name and press <Delete>.
 To log out of several servers, mark each with
 <F5>, then press <Delete>.
 Trustee Rights Specification       Help 1 of 1
  You can only specify directories where user
 accounts exist. Specify the full directory
 path. Begin with the volume name.
 For a list of directories, press <Insert>.
 Trustee Rights Specification       Help 1 of 1
  You can't use drive letters to specify
 directories where a user has trustee rights.
 Specify the full directory path. Begin with
 the volume name.
 For a list of directories, press <Insert>.
 Invalid Drive                      Help 1 of 1
  The drive you specified isn't valid. To select
 a directory, press <Insert>.
 File Exists by New Name            Help 1 of 1
  A file by that name already exists. Use a
 different name.
 User Does Not Exist               Help 1 of 1
  There is no user account with that name. For
 a list of usernames, press <Insert>.
 Invalid Integer Value              Help 1 of 1
  The number you entered isn't allowed. Enter a
 number in the specified range. To cancel
 changes, press Cancel <F7>.
 Station Restrictions               Help 1 of 1
  These are the user's station restrictions.
 You can
 <Insert>     Add an address to the list.
 <Delete>     Remove an address from the list.
 Accounting Servers               Help 1 of 1
  These servers can charge for services.
 (Servers not listed cannot charge.)
 You can use these keys:
 <Insert>  Lists servers to select from
 <Delete>  Revoke server's rights to charge
 Accounting Servers                 Help 1 of 1
  These servers can charge for services.
 Servers Not Authorized to Charge   Help 1 of 1
  These servers are not authorized to charge for
 services. To authorize a server to charge,
 highlight the servername and press <Enter>.
 File Server Console Operators      Help 1 of 1
  These users and groups are allowed to run the
 file server console from any station they are
 logged in at.
 Use <Insert> and <Delete> to edit the list.
 Users that are security equivalent to a user
 or group in this list can also run the console
 from any station.
 Delete Console Operator            Help 1 of 1
  To revoke the selected user's or group's
 rights to run the virtual console from a
 station, select Yes.
 Add File Server Console Operator   Help 1 of 1
  These users and groups have not been granted
 the right to run the file server console from
 a station.
 To give a user or group this right, select a
 user or group name.
 Delete Restrictions                Help 1 of 1
  To remove highlighted stations from the list
 of addresses where this user can log in,
 select Yes.
 Deleting all addresses from the list allows
 the user to log in from any address.
 Remove Accounting Server           Help 1 of 1
  To revoke the marked servers' right to charge
 for services, select Yes.
 To allow the servers to continue to charge,
 press <Escape>.
 Connect Charge Rates               Help 1 of 1
  This shows how much the server charges for
 each minute of connect time (time a user is
 logged in).
 The charge is shown in half-hour increments.
 Connect Charge Rates               Help 1 of 1
  This shows how much the server charges for
 each minute of connect time (time a user is
 logged in).
 To change the charge, highlight the half-hour
 and press <Enter>. To change the charge during
 a larger time period, block the time using
 Mark <F5>, then press <Enter>.
 If there is no charge, select "No Charge."
 Disk Storage Charge Rates          Help 1 of 1
  This shows how much the server charges for
 each block stored on disk for one day.
 The time when disk storage is charged for is
 shown, as well as the amount charged per
 block-day.
 The server charges for all disk storage since
 the last time that disk storage was charged
 for.
 Disk Storage Charge Rates          Help 1 of 2
  This shows how much the server charges for
 each block stored on disk for one day.
 To specify a charge time, highlight the
 half-hour and press <Enter>. To specify a
 charge time for a longer period, block the
 time using Mark <F5>, then press <Enter>.
 If there is no charge, select "No Charge."
 Disk Storage Charge Rates          Help 2 of 2
  The time when disk storage is charged for is
 shown, as well as the amount charged per
 block-day.
 The server charges for all disk storage since
 the last time that disk storage was charged
 for.
 Service Requests Charge Rates      Help 1 of 1
  This is how much the server charges for each
 request made by a station. The charge is shown
 for each half-hour.
 Service Requests Charge Rates      Help 1 of 2
  This is how much the server charges for each
 request made by a station. The charge is shown
 for each half-hour.
 To change the charge, highlight the half-hour
 and press <Enter>.
 To change the charge for a longer time period,
 block the time using Mark <F5>, then press
 <Enter>.
 Service Requests Charge Rates      Help 2 of 2
  To not charge, use the "No charge" rate
 (charge multiplier of 0).
 Each half-hour is marked by the charge rate
 that applies during that period.
 Disk Read Charge Rates             Help 1 of 1
  This shows how much the server charges for
 each block read from disk. The charge is shown
 for each half-hour.
 Disk Read Charge Rates             Help 1 of 1
  This shows how much the server charges for
 each block read from the disk.
 To change the charge, highlight the half-hour
 and press <Enter>. To change the charge for a
 larger time period, block the time using Mark
 <F5>, then press <Enter>.
 To not charge, use the "No Charge" rate.
 Disk Write Charge Rates            Help 1 of 1
  This shows how much the server charges for
 each 4KB block written to disk.
 Disk Write Charge Rates            Help 1 of 1
  This shows how much the server charges for
 each 4KB block written to disk.
 To change the charge, highlight the half-hour
 and press <Enter>. To change the charge for a
 longer time period, block the time using Mark
 <F5>, then press <Enter>.
 If there is no charge, use the "No Charge"
 rate (charge multiplier of 0).
 Allowed Login Times                    Help 1 of 1
  These are times (in half-hour blocks) when this
 user can log in.  The user can log in during times
 marked with an asterisk (*). You can
 <Insert> or (*)        Mark login time.
 <Delete> or space bar  Unmark login time.
 <Enter>                Reverse current setting.
 Mark <F5> changes a large block of time. Highlight
 a time block, press Mark <F5>, and move the cursor
 to the other time block; then press one of the
 keys listed above.
 Allowed Login Times                Help 1 of 1
  These are the times during the week when this
 user can log in. The user can log in during
 time marked with an asterisk (*).
 Default Account Expiration         Help 1 of 1
  Select Yes if you want new accounts to be
 temporary accounts that expire on a specified
 date.
 Select No if new accounts should be permanent.
 Field Exit                          Help 1 of 1
  You changed the contents of this field. To save
 changes, select Yes. To discard changes, select
 No. To continue editing, press <Escape>.
 Default Expiration Date            Help 1 of 1
  Enter the default expiration date for new
 user accounts.
 The server will disable accounts after the
 date is past.
 To cancel changes, press Cancel <F7>.
 Default Limit Connections          Help 1 of 1
  To limit connections on new accounts, select
 Yes and enter the maximum number of stations
 that a user can log in to at one time..
 To cancel changes, press Cancel <F7>.
 Default Maximum Connections        Help 1 of 1
  Enter the default maximum number of
 connections for new user accounts. To cancel
 changes, press Cancel <F7>.
 The maximum connections limit is the maximum    number of stations a user can log in to at the
 same time.
 Default "Require Password"         Help 1 of 1
  To set the default for new accounts to
 require passwords, select Yes. To cancel
 changes, press Cancel <F7>.
 If the user's password isn't long enough, the
 user is told the password has expired.
 If "Limit Grace Logins" is set to Yes, the
 user won't be able to log in if the password
 isn't changed within the grace login period.
 Minimum Password Length            Help 1 of 1
  Enter the default minimum password length for
 new user accounts. To cancel changes, press
 Cancel <F7>.
 If the user's password isn't long enough, the
 user is told the password has expired.
 Default Force Password Changes     Help 1 of 1
  To require users to change their passwords at
 regular intervals, select Yes and enter the
 number of days between password changes.
 To cancel changes, press Cancel <F7>.
 Password Expiration Interval       Help 1 of 1
  Enter the number of days that a user can use
 the same password. To cancel changes, press
 Cancel <F7>.
 When the password expires, the user is told
 to change the password.
 Default Limit Grace Logins         Help 1 of 1
  To limit the times users can log in with an
 expired password, select Yes and enter the
 number of grace logins.
 To cancel changes, press Cancel <F7>.
 A user who doesn't change the password within
 the specified number of logins can't log in
 until the supervisor grants more grace logins
 or changes the password expiration date.w
 Default Grace Logins               Help 1 of 2
  Enter the number of grace logins you want for
 user accounts. To cancel changes, press Cancel
 <F7>.
 After a user's password expires, the user has
 the specified number of grace logins using the
 expired password.
 Users are informed that the password is
 expired and are asked to change it.
 Default Grace Logins              Help 2 of 2
  If the password is not changed before the
 grace logins are used up, the user can't log
 in until given more grace logins or until the
 password expiration is reset.
 Require Unique Passwords           Help 1 of 1
  To require users to use unique passwords,
 select Yes. To cancel changes, press Cancel
 <F7>.
 If a user must use unique passwords, the
 server remembers previous passwords, and does
 not let the user reuse a password.
 Limit Disk Space                   Help 1 of 1
  To limit the amount of disk space available
 for new accounts, select Yes. To set no
 limitation, select No.
 To cancel changes, press Cancel <F7>.
 Maximum Disk Space                 Help 1 of 1
  Enter the default maximum disk space for each
 user on the server in 4KB blocks. To cancel
 changes, press Cancel <F7>.
 Default Restrictions               Help 1 of 8
  This lets you set default restrictions that
 user accounts will have when they are created.  The entries are explained below:
 Account Has Expiration Date
     If Yes, the account expires on a specified
     date. If No, the account is permanent.
 Date Account Expires
     The account expiration date, if any.B
 Default Restrictions               Help 2 of 8
  Limit Concurrent Connections
     If Yes, the user can log in to a specified
     number of stations at one time. If No, the
     user can log in to as many stations as the
     server supports.
  Maximum Connections
     Shows how many stations the user can log
     in from, if there is a limit.
 Maximum Restrictions               Help 3 of 8
  Create Home Directory For User
     If Yes, when a new user is created, the
     system prompts the supervisor for a
     directory path for the user's home
     directory.
 Require Password
     If Yes, the user must have a password. If
     No, the user can choose to have a
     password.
 Default Restrictions               Help 4 of 8
  Minimum Password Length
     Shows the minimum length (between 1 to 20
     characters) of the required password, if a      password is required.
 Force Periodic Password Changes
     If Yes, the user's password expires
     periodically.
 Default Restrictions               Help 5 of 8
  Days Between Forced Changes
     The number of days the user can use a
     password before it expires, if the
     password does expire.
 Limit Grace Logins
     If "Force Periodic Password Changes" is
     set to Yes, this specifies if there is a
     limit to the number of logins before the
     user must change the password.
 Default Restrictions               Help 6 of 8
  Grace Logins Allowed
     If "Limit Grace Logins" is set to Yes,
     this indicates the number of chances the
     user has to change the password when it
     expires.
     If the password isn't changed within the
     specified number of logins, the user won't
     be able to log in.`
 Default Restrictions               Help 7 of 8
  Require Unique Passwords
     If Yes, the user must use a different
     password each time the password is
     changed. If No, the user can use
     previous passwords.
 Account Balance
     If the server supports accounting, this
     specifies the account balance given to
     users when they are created.
 Default Restrictions               Help 8 of 8
  Allow Unlimited Credit
     If the server supports accounting, this
     field shows whether new user accounts are
     given unlimited credit.
 Low Balance Limit
     If unlimited credit is not allowed, this
     indicates the lowest balance the user can
     have and still receive services that are
     being charged for.
 Account Balance                   Help 1 of 2
  This shows the user's account balance and
 credit limit.
 The account balance is the amount of funds the
 user has. When the user is charged for a
 service, the balance decreases.
 The credit limit determines how low an account  balance can drop before the user no longer
 receives chargeable services.
 Account Balance                    Help 2 of 2
  A zero credit limit means the user can't
 receive services when the account balance
 drops below zero.
 A negative credit limit means the user's
 account can go in the red until it reaches the
 credit limit.
 A positive credit limit means the user must
 have funds in the account to receive services.
 Change Account Balance            Help 1 of 1
  To set users' account balance and credit
 limits, select Yes. To change the values,
 press <Escape>.
 Account Balance                    Help 1 of 1
  Enter the number of charges allowed the user
 and press <Escape>. To cancel changes, press
 Cancel <F7>.
 The account balance is the number of charges a
 user has on the server. The user's account
 balance decreases each time the user is
 charged for a service.
 Allow Unlimited Credit            Help 1 of 1
  To give the user unlimited credit, type Y.
 To cancel changes, press Cancel <F7>.
 If you limit the user's credit, specify the
 amount of credit the user can receive.Y
 Credit Limit                      Help 1 of 2
  Enter the credit limit for the user, then
 press <Escape>.
 To cancel changes, press Cancel <F7>, then
 <Escape>.
 The credit limit specifies the lowest balance   the user can have and still receive services
 that are being charged for.
 Credit Limit                       Help 2 of 2
  If the credit limit is set to zero, the user
 cannot receive services when the account
 balance drops to zero.
 If the credit limit is negative, the user can
 charge services after the account balance
 falls below zero.
 If the credit limit is positive, the user must
 maintain a minimum balance.
 Detect Intruders                   Help 1 of 1
  If you want the server to detect when someone
 is trying to break in to an account, select
 Yes.
 To cancel changes, press Cancel <F7>.
 Incorrect Login Attempts          Help 1 of 1
  Enter the number of login attempts after
 which the server should decide that an
 intruder is trying to break into an account.
 To cancel changes, press Cancel <F7>.
 Bad Login Count Retention          Help 1 of 1
  If no incorrect attempts are made to log in
 for the specified length of time, this clears
 the bad login count.
 Enter the days, hours, and minutes that bad     login attempts should be remembered.
 To cancel changes, press Cancel <F7>.
 Lock Account After Detection       Help 1 of 1
  If you want an account to be locked when an
 intruder is detected, select Yes.
 To cancel changes, press Cancel <F7>.
 Intruder Detection/Lockout         Help 1 of 5
  This lets you set intruder detection and
 lockout options.
 These options let you specify whether attempts
 to log in with invalid passwords are detected.
 The fields are described on the following
 screens.Q
 Intruder Detection/Lockout        Help 2 of 5
  Detect Intruders
     If Yes, the server records attempts to
     log in with an invalid password.
 Bad Login Count Retention Time
     The amount of time, after an incorrect
     login attempt, that must pass before the
     bad login attempt is forgotten by the
     server.
Intruder Detection/Lockout          Help 3 of 5
  Incorrect Login Attempts
     The number of incorrect login attempts for
     a user account. If the number of attempts
     reaches the number in this field, the
     server detects an intruder.
     The server resets this number when a user
     logs in or when the Bad Login Count
     Retention Time has passed.
 Intruder Detection/Lockout         Help 4 of 5
  Lock Account After Detection
     If Yes, the server locks the account when
     an intruder is detected. When an account
     is locked no one can log in to it for the
     length of time specified in the Length of
     Account Lockout field.
     Anyone with Supervisor rights can use
     SYSCON to unlock the account before the
     specified time has passed.
 Intruder Detection/Lockout         Help 5 of 5
  Length of Account Lockout
     Specifies the amount of time the account
     will be locked if the Lock Account
     After Detection option is set to Yes.
 Intruder Lockout Status           Help 1 of 4
  This describes the intruder lockout status
 for an account.
 Account Locked
     Shows if the account is locked because of
     an intruder. To unlock it, select No.
 Incorrect Login Count
     Shows how many login attempts have been
     made.
 Intruder Lockout Status           Help 2 of 4
  Account Reset Time
     If the account is locked, this is when
     the account will be unlocked.
     If the account is unlocked but the
     "Incorrect Login Count" is greater than
     zero, this is when the incorrect login
     count will be reset to zero.
Intruder Lockout Status             Help 3 of 4
  Time Until Reset
     If the account is locked, this is how long
     it will stay locked.
     If the account is unlocked but the
     "Incorrect Login Count" is greater than
     zero, this is how much time will elapse
     before the incorrect login count will be
     reset to zero.
 Intruder Lockout Status          Help 4 of 4
  Last Intruder Address
     If the account is locked, this is the
     station addresss of the user who caused
     the account to be locked.
     Otherwise, this is the address of the
     last station that tried to log in with
     an incorrect password.
 Account Locked                    Help 1 of 1
  To allow users to log in to this account,
 select No, then press <Enter>.
 To prevent users from logging in, select Yes,
 then press <Enter>.
 To cancel changes, press Cancel <F7>.
 You can unlock an account that is locked
 because of intruder detection; you cannot lock
 an account that is not currently locked.
 Edit Charge Multiplier               Help 1 of 1
  Enter the number you want for the charge rate
 multiplier. Otherwise, press <Escape>. The
 charge rate multiplier is used as follows:
 AmountUsed * Multiplier / Divisor = ChargeAmount
 The multiplier should be much smaller than the
 divisor, since the "AmountUsed" is usually
 larger than the "ChargeAmount."
 Edit Charge Divisor                Help 1 of 1
  Enter the number you want to use for the charge
 rate divisor. Otherwise, press <Escape>. The
 charge rate divisor is used as follows:
 AmountUsed * Multiplier / Divisor = ChargeAmount
 The divisor is normally larger than the
 multiplier, since the AmountUsed is larger than
 ChargeAmount.
 Enter Charge Rate                    Help 1 of 1
  To create a charge rate, use this formula:

 AmountUsed * Multiplier / Divisor = ChargeAmount
 Normally the amount of resource used is much
 larger than the amount that should be charged,
 so the divisor amount should be larger than the
 multiplier amount.
 To set the charge amount to "No Charge," enter 0
 as the multiplier.
 Account Disabled                   Help 1 of 1
  If you don't want this account used, enter
 Yes. If you want the user to be able to use
 this account, press <Enter>.
 To cancel changes, press Cancel <F7>.
 If the account won't be used again, delete it
 rather than disable it.
 Account Expires                    Help 1 of 1
  If this is an account that should expire on a
 set date, enter Yes, then enter the expiration
 date of the account.
 If the account is permanent, enter No.
 To cancel changes, press Cancel <F7>.
 Account Expiration Date           Help 1 of 1
  Enter the date this account should expire.
 This account will be disabled by the server
 after the expiration date has passed.
 To cancel changes, press Cancel <F7>.
 Limit Connections                  Help 1 of 1
  To limit the number of stations where this
 user can log in, select Yes and enter the
 maximum number of connections.
 To cancel changes, press Cancel <F7>.
 Maximum Connections                Help 1 of 1
  Enter the maximum number of simultaneous
 connections this user can have.
 To cancel changes, press Cancel <F7>.
 The maximum connections limit is the maximum
 number of stations that the user can log in to
 at one time.
 Allow User to Change Password      Help 1 of 1
  To allow users to change their password,
 select Yes. To cancel changes, press Cancel
 <F7>.
 Require Password                   Help 1 of 1
  To require this user to have a password,
 select Yes. To cancel changes, press Cancel
 <F7>.
 If a password isn't the required length, the
 user is told that the password has expired.
 If "Limit Grace Logins" is set to Yes, the
 user will be locked out if a password isn't
 assigned within the grace login period.
 Minimum Password Length            Help 1 of 1
  Enter the minimum required length of the
 user's password. To cancel changes, press
 Cancel <F7>.
 Force Periodic Password            Help 1 of 1
  To require this user to change the password
 regularly, select Yes and enter the number of
 days between changes.
 To cancel changes, press Cancel <F7>.
 Days Between Forced Changes        Help 1 of 1
  Enter the number of days that the user can
 use the same password.
 To cancel changes, press Cancel <F7>.
 After the specified number of days, the user
 is informed that the password has expired.
 Date Password Expires              Help 1 of 1
  Enter the next date when this user's password
 should expire.
 If you enter a date too far in the future, the
 date will be changed to the current date plus
 the number of "Days Between Forced Changes."
 To cancel changes, press Cancel <F7>.
 Limit Grace Logins                 Help 1 of 1
  To limit the number of times this user can
 log in with an expired password, select Yes
 and enter the number of Grace logins.
 To cancel changes, press Cancel <F7>.
 If the password isn't changed with the number
 of logins, the Supervisor must grant more
 logins or change the password expiration.
 Grace Logins Allowed               Help 1 of 1
  Enter the number of grace logins the user can
 have after the password expires. To cancel
 changes, press Cancel <F7>.
 When logging in, the user is told that the
 password has expired and must be changed.
 If the password isn't changed, the supervisor
 must grant more grace logins or reset the
 password expiration.
 Remaining Grace Logins             Help 1 of 1
  These are the number of grace logins remaining
 for the user.
 Set the number of remaining grace logins to
 the number of times that the user can log in
 with an expired password.
 To cancel changes, press Cancel <F7>.
 Require Unique Passwords           Help 1 of 1
  To require this user to use a new password
 each time the password is changed, select Yes.
 To cancel changes, press Cancel <F7>.
 A user can change the password several times
 on the same day without the server counting
 the passwords as previous passwords.
 Limit Disk Space                   Help 1 of 1
  To limit the amount of disk space this user
 can use, select Yes. To cancel changes, press
 Cancel <F7>. Applies to 2.x servers.
 Maximum Disk Space                 Help 1 of 1
  Enter the maximum disk space, in 4KB blocks,
 that this user can use on the server.
 To cancel changes, press Cancel <F7>.
 Set Users' Restrictions            Help 1 of 9
  These are restrictions you can place on user
 accounts. The fields are described below.
 Account Disabled
     If Yes, the user can't log in.
 Account Has Expiration Date
     If Yes, the account is temporary and will
     expire on a specified date. If No, the
     account is permanent.
 Set Users' Restrictions            Help 2 of 9
  Date Account Expires
     Shows the account expiration date, if any.
 Allow User to Change Password
     If Yes, users can change their passwords.
 Set Users' Restrictions            Help 3 of 9
  Minimum Password Length
     Shows the minimum length of the password,
     if a password is required. (Length: from
     1 to 20.)
 Force Periodic Password Changes
     Shows if the user must change the password
     regularly, if a password is required and
     the user can change the password.
 Set Users' Restrictions            Help 4 of 9
  Days Between Forced Changes
     The number of days the user can use a
     password before it expires if "Force
     Periodic Password Changes" is set to Yes.
 Limit Concurrent Connections
     If Yes, the user can log in to only a
     limited number of stations at one time.
 Set Users' Restrictions            Help 5 of 9
  Date Password Expires
     Shows the next date on which the user's
     password expires, if "Force Periodic
     Password Changes" is set to Yes.
 Maximum Connections
     Specifies the maximum number of stations
     the user can log in to, if Limit
     Concurrent Connections is set to Yes.I'
 Set Users' Restrictions            Help 6 of 9
  Limit Grace Logins
     If Yes, a user must change the password
     within the number of grace logins.
 Grace Logins Allowed
     The number of times the user can log in
     with an expired password, if a limit is
     set.
 Set Users' Restrictions            Help 7 of 9
  Remaining Grace Logins
     If "Limit Grace Logins" is set to Yes,
     this shows the number of times the user
     can log in using an expired password.

 Notice to Password Expiration
     Specifies the number of days notice the
     user gets before the password expires.f*
 Set Users' Restrictions            Help 8 of 9
  Require Unique Passwords
     Shows if the user must use a different
     password when the password is changed.
 The disk space options on the following screen
 appear only if the option to track disk space
 was selected during server installation for a
 2.x server.
 Set Users' Restrictions            Help 9 of 9
  Limit Disk Space
     If Yes, the user can use only a limited
     amount of disk space.
 Maximum Disk Space
     Shows the maximum amount of disk space the
     user can use, if there is a limit.
 Save Restrictions for Users        Help 1 of 1
  To set marked users' restrictions to these
 restrictions, select Yes. To continue editing
 restrictions, press <Escape>.?.
 Account Restrictions               Help 1 of 7
  These are restrictions on the user's account.
 You must have Supervisor rights make changes.   The restrictions are described below.
 Account Disabled
     Shows whether the user is authorized to
     log in to the file server.
 Account Has Expiration Date
     Shows if the account will expire.
 Account Restrictions               Help 2 of 7
  Date Account Expires
     Shows the account expiration date.
 Limit Concurrent Connections
     Shows if there is a limit to the number of
     stations a user can log in to at one time.
 Maximum Connections
     Shows the number of stations the user
     can log in to. Default is one.
 Account Restrictions               Help 3 of 7
  Allow User To Change Password
     Shows if the user can change the account
     password.
 Require Password
     Shows if the account must have a password.      If yes, set a minimum length.
 Minimum Password Length
     Shows the required length of the password.
     Can be between 1 and 20 characters.
 Account Restrictions               Help 4 of 7
  Force Periodic Password Changes
     Shows if the user must change the password
     regularly.
 Days Between Forced Changes
     Shows how often the password must be
     changed.
 Date Password Expires
     Shows when the password expires.
 Account Restrictions               Help 5 of 7
  Limit Grace Logins
     Shows if there is a limit to the number of
     grace logins before a user must change the
     password.
 Grace Logins Allowed
     Shows how many times the user can log in
     with an expired password.
 Account Restrictions               Help 6 of 7
  Remaining Grace Logins
     Shows the number of times remaining that a
     user can log in with an expired password.
 Require Unique Passwords
     Shows if the user must use a different
     password when the password is changed.
 Account Restrictions               Help 7 of 7
  The following options appear if the option to
 limit a user's disk space was selected during
 installation.
 Limit Disk Space
     Shows if there is a limit to the amount of
     disk space a user can use.
 Maximum Disk Space
     Shows how much disk space the user can
     use, in 4K blocks.
 Length of Account Lockout         Help 1 of 1
  Enter the amount of time in days, hours, and
 minutes that an account should remain locked
 after someone tries to break in. Then press
 <Enter>.
 To cancel changes, press Cancel <F7>. To
 cancel changes after pressing <Enter>, enter a
 new time.  Zero may be entered.
 Account Balance                    Help 1 of 1
  This is the user's current balance and credit
 limit.
 The account balance is the amount of funds the
 user has.
 The credit limit determines how low the user's
 account balance can drop before the user can
 no longer receive services charged for.
 Other Users and Groups             Help 1 of 1
  These users and groups don't manage the
 selected user or group.
 To allow a user or group to manage the user or
 group, select a user or group name.
 To make several managers, mark each using       <F5>, then press <Enter>.
 Other Users and Groups            Help 1 of 1
  These users and groups don't have workgroup
 manager rights.
 To make a user or group a workgroup manager,
 select the user or group.
 To make several workgroup managers, mark each
 using Mark <F5>, then press <Enter>.
 Network Address                    Help 1 of 1
  Enter the network portion of the address (the
 8-digit hex number).
 To cancel changes, press Cancel <F7>.
 To find the network address, log in at a
 station and type "userlist /a." The entry
 marked with an asterisk shows the network
 address.
 Node Address                       Help 1 of 1
  Enter the node portion of the address (the
 12-digit hex number). To cancel changes, press
 Cancel <F7>.
 To find the node address, log in at the
 station and type "userlist /a." The entry
 marked with an asterisk shows the node's
 address. You should have already entered the
 network portion of the address.
 Install Accounting                 Help 1 of 1
  To install Accounting, select Yes.
 Install accounting to track when users log in
 and out or to charge users for services.
 Cancel Time Changes               Help 1 of 1
  To cancel changes, select Yes. Restrictions
 will return to orginal restrictions before
 you edited them.
 Change Station Restrictions       Help 1 of 1
  To restrict marked users so they can log in
 only from the listed station addresses,
 select Yes.
 To edit station restrictions, press <Escape>.
 To list no addresses means a user can log in
 from anywhere.
 Allow Login From All Nodes        Help 1 of 1
  To allow the user to log in from any
 station, select Yes.
 To specify node addresses the user can log in
 from, select No.
 To cancel changes, press <Escape>.
 Save Time Restrictions             Help 1 of 1
  To change marked users' time restrictions to
 to these restrictions, select Yes. To continue
 editing time restrictions, press <Escape>.
 Cancel Charge Changes             Help 1 of 1
  To cancel changes, select Yes. All charge
 rates will return to the values they had when
 you started editing them.
 Confirm Clear Error Log            Help 1 of 1
  To clear errors from the log, select Yes. To
 continue looking at the log, press <Escape>.
 Edit System AUTOEXEC File          Help 1 of 9
  The AUTOEXEC file contains commands that the
 server executes when it is brought up. This
 does not apply to Portable servers.
 Enter commands for the AUTOEXEC file as you
 would at the file server console, one command
 per line. When you finish, press <Escape>.
 To cancel changes, press <Escape> and select
 Edit System AUTOEXEC File          Help 2 of 9
  Sample AUTOEXEC file commands:

 Loadable Modules (only for 3.x file servers)
     LOAD INSTALL
     LOAD MONITOR
     LOAD PSERVERMK
 Edit System AUTOEXEC File          Help 3 of 9
  Batch file commands
     #
     ECHO
     FILE SERVER NAME
     IPX INTERNAL NET
     #  Lets you put remarks in the file so you
     remember why the command was added.
     ECHO  Default: Off when server is booting.
 Edit System AUTOEXEC File          Help 4 of 9
  Batch file commands, continued
     ECHO ON  Console screen shows commands as
     they execute. Use to troubleshoot errors
     in the AUTOEXEC file.
     FILE SERVER NAME (3.x) Assigns a name to
     the server as it boots. 2.x uses NAME.
     IPX INTERNAL NET (3.x only) Assigns the
     internal network number for the server.
 Edit System AUTOEXEC File          Help 5 of 9
  LAN driver commands (3.x only)
     Precede LAN driver commands with a comment
     line to explain what the command loads:
     # To load the NE2000 driver the first time
     LOAD NE2000 PORT=300 INT=3
     # To load NE2000 driver with a frame type
     LOAD NE2000 PORT=3000 INT=3
          FRAME=ETHERNET_II|P
 Edit System AUTOEXEC File          Help 6 of 9
  BIND commands (3.x only)
     Precede BIND commands with a comment line
     to explain what the command binds:
     #To bind a protocol to driver loaded once
     BIND IPX NE2000 NET=26
     #To bind to driver loaded more than once
     BIND IPX NE2000 [PORT=340 INT=4 FRAME=
          ETHERNET_802.3] NET=27 ?R
 Edit System AUTOEXEC File          Help 7 of 9
  SET commands--parameters other than default;
     defaults set automatically. SET commands
     show a default parameter on the first line
     and parameter limits on the second: (3.x)
     Set Minimum File Cache Report Threshold=20
     #Limits: 10 to 100
     Set Minimum Directory Cache Buffers=20
     #Limits: 10 to 2000
 Edit System AUTOEXEC File          Help 8 of 9
  SET commands, continued (3.x)
     Set Minimum File Delete Wait Time=1 minute           5.9 seconds
     #Limits: 0 to 7 days
     Set File Delete Wait time=5 minutes 29.6
          seconds
     #Limits: 50 to 2000
     Set Allow Unencrypted Passwords=OFF
 Edit System AUTOEXEC File          Help 9 of 9
  Console commands (3.x)
     MOUNT
     REMOVE DOS
     SECURE CONSOLE
     SPOOL
     TRACK ON
     UPS STATUS
 Note: Don't put DOWN in the AUTOEXEC file.
 It will down the server when it boots if you
 No Rights to Rename                Help 1 of 1
  You don't have the necessary Supervisor or
 workgroup manager rights to rename the user or
 group.
 Insufficient Rights to Add Trustee   Help 1 of 1
  You don't have Access Control rights in this
 directory.
 To grant or revoke rights in a directory, you
 need Access Control rights in that directory.
 Set Directories Trustee Rights     Help 1 of 1
  These are the rights you can assign to this
 user in each marked directory. You can
 <Insert>  Grant additional rights.
 <Delete>  Revoke highlighted right.
 When the rights you want to assign are listed,
 press <Escape> to assign them.
 No Rights to Alter Assignments     Help 1 of 1
  You don't have rights to alter trustee
 assignments in this directory. You need the
 Access Control rights.
 You have Supervisor rights over the selected
 user or group because you are a workgroup
 manager. Those rights do not include special
 rights to directories.
 Select File                        Help 1 of 1
  To select a file, press <Insert> and select
 from the list of files, or enter a filename.
 Volume Space Restrictions          Help 1 of 1
  Enter the disk space (in 4KB blocks) this user
 can use on the selected volume.
 User Disk Volume Restrictions      Help 1 of 2
  To limit the amount of space a user has on a
 volume, type Y at the "Limit Volume Space?"
 prompt.
 Enter a new "Volume Space Limit."
 To remove the space restriction on a volume,
 type N at the "Limit Volume Space?" prompt.
 User Disk Volume Restrictions      Help 2 of 2
  "Volume Space Limit" is the maximum blocks
 the user can use on the selected volume.
 "Volume Space In Use" is the number of blocks
 in use by the user on the volume.
 User Disk Volume Restrictions      Help 1 of 1
  "Volume Space Limit" is the maximum number of
 blocks the selected user can use on the
 selected volume.
 "Volume Space In Use" is the actual number of
 blocks in use.
 Select Volume                        Help 1 of 1
  Highlight the volume you want and press <Enter>.
 Select Files                       Help 1 of 1
  To select files, press <Insert> and select
 from the list of files, or enter a filename.
 Trustee File Assignments           Help 1 of 1
  These are files in the selected directory and
 its subdirectories for which the highlighted
 user's or group's trustee rights have been
 granted or revoked.]c
 Trustee File Assignments           Help 1 of 2
  These are the files in the selected directory
 and its subdirectories in which this user's or
 group's trustee rights have been granted or
 revoked.
 (Trustee rights extend to each subdirectory of
 the directory where they are granted, unless
 they are changed in the subdirectory.)
 Trustee File Assignments           Help 2 of 2
  Use the following to make changes:
 <Insert>  Declare user's or group's trustee
           rights for a file.
 <Delete>  Remove trustee rights declaration.
 <Enter>   Change rights granted or revoked in
           the highlighted file.
 Browse Files                      Help 1 of 1
  To select a file, highlight a filename and
 press <Enter>.
 Create Home Directory For User     Help 1 of 1
  This allows you to create a home directory
 for a new user. To create a home directory
 when each user is created, select Yes.
 Create New Path                    Help 1 of 1
  The path you specified does not exist. If you
 misspelled the path name, press <Escape>, then
 correct the spelling.
 If Yes, the path is created as a home
 directory for the user.
 Security Audit Control Default    Help 1 of 1
  These options are assigned to newly created
 users. The server uses these options to
 audit security of users that don't have their
 own lists.
 You can use these keys:
 <Insert>      Lists inactive options
 <Delete>      Deletes security audit option
 Mark <F5>     Marks multiple options
 Edit System SERVER.CFG File          Help 1 of 1
  SERVER.CFG contains commands the server uses to
 configure itself when it is first brought up.
 SERVER.CFG can include these commands:
 VAP WAIT n          (n = time in seconds)
 UPS TYPE n          (n = UPS type number)
 UPS IO n            (n = IO address)
 UPS DOWN n          (n = time in minutes)
 UPS WAIT n          (n = time in seconds)
 TTS WAIT n          (n = time in seconds)
 SERVER PROCESSES n  (n = number of processes)
 User Disk Server Restrictions      Help 1 of 1
  To limit the amount of space a user has on a
 server, type Y at the "Limit Server Disk
 Space?" prompt.
 Enter a new Maximum Disk Server Space and
 press <Enter>.
 To remove the space restriction on the server,
 type N at the "Limit Server Disk Space?"
 prompt.
 User Disk Server Restrictions      Help 1 of 1
  Maximum Server Disk Space is the maximum
 number of blocks the selected user can use on
 the selected server.
 Disk Space In Use is the actual number of
 blocks in use on the server.
 Inactive Security Audit Options   Help 1 of 1
  These options are inactive. To activate an
 option, select it and press <Enter>.
 To activate more than one option, use Mark
 <F5> to select the options you want; then
 press <Enter>.
 Delete Security Audit Option      Help 1 of 1
  To remove highlighted option(s), select Yes.
 User Security Audit Control       Help 1 of 1
  These options are assigned to this user. The
 server uses this list to audit the user's
 security.
 You can use these keys:
 <Insert>      Lists inactive options
 <Delete>      Deletes options
 Mark <F5>     Marks multiple options
 Security Audit Control Unknown Object  Help 1 of 1
  The server uses these options to audit security
 of attached but not-logged-in users and non-user
 objects such as print servers.
 You can use these keys:
 <Insert>      Lists inactive options
 <Delete>      Deletes security audit option
 Mark <F5>     Marks multiple options
 Security Audit Control             Help 1 of 1
  Default
   Lets you view and change the default
   security audit options for new users and
   for users who do not yet have a security
   AUDIT_MASK property.
 Unknown Object
   Lets you view and change the security
   audit options for attached but                  not-logged-in users and non-user objects
   such as print servers.
 Security Audit Control List of Users    Page 1 of 1
  This is a list of all users on this server.  This
 list initially appears with members of the selected
 group "marked" or highlighted.  You can mark and
 un-mark users as you wish.  When you finish working
 with the list press <Enter>.  The AUDIT_MASK of
 each marked user will then be modified based upon
 the list of Selected Audit Options you will define
 in a screen that follows.
 Marked Users Security Audit Control  Help 1 of 1
  This Selected Security Audit Options list is
 used to modify the active security audit options
 of all marked users.
 You can use these keys:
 <Insert>      Lists other options
 <Delete>      Deletes options
 <Mark>        Marks multiple options
 Security Audit Function Inactive  Help 1 of 1
  The security audit function exists but is
 inactive on this server. Activate the
 security audit function when the server is
 brought up; then your changes will take
 effect.
 How to Modify Marked Users           Help 1 of 1
  To modify each marked user's active security
 audit options, use one or more of the following:
 Add Selected Options To Security Audit Mask
          Add options to each marked user.
 Delete Selected Options From Security Audit Mask
          Delete options from each marked user.
 Replace (Overwrite) Security Audit Mask
          Replace each marked user's security
          audit mask, Selected Options active.
 NOTE: Selected Options refers to a list of
 security audit options you will define after you
 make your choice of How to Modify Marked Users.
 Other Security Audit Options      Help 1 of 1
  These security audit options are not
 selected. To select an option, highlight it
 and press <Enter>.
 To select several options, use Mark <F5> to
 highlight options you want; then press
 <Enter>.