home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
IBM Presents OS/2 Software Hits 1995
/
OS-2_SW_HITS_2ND_EDITION_1995.ISO
/
i17
/
nfs20c1.exe
/
lanlk
/
LSIH.MSG
(
.txt
)
< prev
Wrap
OS/2 Message File
|
1994-03-23
|
7KB
|
107 lines
MKMSGF
?HCause: The version of the base operating system currently
installed is not compatible with the version of LAN Services being
installed.
Action: Install OS/2 2.0 and then reinstall LAN Services.
HCause: The LAN Services installation/configuration program is
already running. You cannot start the installation/configuration
program again at this time.
Action: Run only one copy of the LAN Services installation/configuration
program at a time.
HCause: The LAN Services installation/configuration program is
unable to continue because there is not enough fixed-disk space on
this workstation.
Action: Make fixed-disk space available on this workstation by moving or
deleting files, and then try the installation again.
HCause: The LAN Services installation/configuration program is
unable to open or read this required file, or you have not logged
on with sufficient privilege to allow this required file to be
copied.
Action: Make a new copy of the product diskettes and try the installation
again, or log on with sufficient privilege and then try the
installation again.
HCause: The LAN Services installation/configuration program is
unable to load this dynamic link library (DLL).
Action: Make a new copy of the product diskettes and try the installation
again.
HCause: The LAN Services locked-file device driver is unable to
continue because there is not enough fixed-disk space on this
workstation.
Action: Make fixed-disk space available on this workstation by moving or
deleting files, and then start the workstation again.
HCause: This error code indicates that LAN Services has detected
a parameter that is not correct.
The installation command syntax is:
[d:\path\]LANINSTR {/SRV | /REQ} [/R:d:\path\filename
/G:d:\path /L1:d:\path\filename /L2:d:\path\filename]
where:
/SRV Specifies you are remotely installing server code.
/REQ Specifies you are remotely installing requester code.
/R Specifies the fully qualified file name of a response file.
/G Specifies the fully qualified path of a directory containing
files that are included by the response file.
/L1 Specifies the fully qualified file name of an error log file.
/L2 Specifies the fully qualified file name of a history log file.
Action: Try the command again using the correct parameters.
HCause: You have not logged on with sufficient privilege
to allow the files to be copied to the fixed disk on this
workstation.
Action: Log on with sufficient privilege and then try the installation
again.
HCause: The value you specified for REMOTE_INSTALL_STATE is not
valid.
Action: SET REMOTE_INSTALL_STATE=. Then try the installation again.
HCause: The LAN Services installation/configuration program
could not initialize history and error logging because it could
not access the specified file.
Action: Ensure that the file name specified is correct and that you have
access privileges for the file. Then try the installation again.
?????????????????????????????????????????????????????????????????????????????????????????HCause: An error occurred while writing to the log file.
Logging to that file was disabled, but the
installation/configuration program was allowed to continue.
The error may have been caused by the loss of LAN connectivity,
lack of fixed-disk space, or lack of access to the log file.
Action: Verify that a LAN connection exists and that enough fixed-disk
space is available. Also make sure the user has the proper
access permissions to the log file and that no other programs
are trying to write to the log file at the same time.
HCause: The module specified completed unsuccessfully with
a return code. The return code may be module-specific.
Action: Contact your network administrator for assistance.
HCause: IBMLANLK detected errors while processing the
following commands. The commands did not complete
successfully.
Action: Verify that there is enough fixed-disk space available
and that the user has the proper access permissions to
perform the commands listed; then try the installation again.
HHHCause: The file specified on the /B parameter does not have the
format required to restore ACLs.
Action: Specify the correct file name on the /B parameter or correct the
format of the specified file.
HCause: An error occurred because of a request made to the operating
system.
Action: Type Help followed by the error number to determine the cause of
the error.
HCause: The APIs are not on this workstation or their path is not
in LIBPATH in CONFIG.SYS.
Action: Verify that the LIBPATH statement in CONFIG.SYS contains a pointer
to the APIs. If you are using the 386 boot diskette, make sure that
the APIs have been copied to the fixed disk.
HCause: There is an error in the command syntax.
Action: Type the command followed by a ? to display the proper syntax.
HCause: The file or subdirectory specified on one of the command
parameters could not be found.
Action: Reissue the command with the proper file or subdirectory name.
HCause: The operating system returned an error on a file request
for the specified file.
Action: Type Help followed by the error number to determine the cause of
the error.
HCause: A request to create the specified file or subdirectory
failed.
Action: Ensure that the proper file or subdirectory was specified and that
you have the proper authority to create the file or subdirectory.
HCause: The required amount of disk space is not available on the
specified drive.
Action: Move or erase files to increase the available disk space
or specify a different drive.