home *** CD-ROM | disk | FTP | other *** search
/ IBM Presents OS/2 Software Hits 1995 / OS-2_SW_HITS_2ND_EDITION_1995.ISO / i17 / 401pt2.exe / 401PT2.TXT next >
Text File  |  1994-06-22  |  27KB  |  832 lines

  1.  
  2.               NOVELL TECHNICAL INFORMATION DOCUMENT
  3.  
  4. TITLE:              NetWare 4.01 OS Patches
  5. DOCUMENT ID:        TID021320
  6. DOCUMENT REVISION:  A
  7. DATE:               08JUN94
  8. ALERT STATUS:       Yellow
  9. INFORMATION TYPE:   Symptom Solution
  10. README FOR:         401PT2.EXE
  11.  
  12. NOVELL PRODUCT and VERSION:
  13. NetWare 4.01
  14.  
  15. ABSTRACT:
  16.  
  17. This file contains the latest operating system test patches for NetWare 4.01. 
  18. Included with this prerelease are all patches for all user-versions of NetWare
  19. 4.01.  The patches included have system tested by Novell.  This Patch Kit is
  20. more current than the NW4UPD_101 Update CD-ROM and contains additional
  21. patches.
  22.  
  23. ------------------------------------------------------------------------------
  24. DISCLAIMER
  25. THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL.  NOVELL
  26. MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION.  HOWEVER, THE
  27. INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION ONLY.  NOVELL
  28. MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS INFORMATION.
  29. ------------------------------------------------------------------------------
  30. BCKTTSFX NLM
  31. ============
  32.  
  33. SYMPTOM
  34.  
  35. Typically, after rebooting the server and going though the process of backing
  36. out the TTS files, the server would hang with no messages. 
  37.  
  38. SOLUTION
  39.  
  40. Apply BCKTTSFX NLM.       932 03-28-94   8:49a
  41.  
  42. Solution Specifics:
  43.  
  44. Versions of this patch will run on the following NetWare operating systems: 
  45.      3.11, 3.12, 4.01
  46.  
  47. This Patch corrects a problem with backing out more than 263 Transaction
  48. Tracking System (TTS) files.
  49.  
  50. It is important to Load BCKTTSFX.NLM after loading PATCH MANAGER in the
  51. STARTUP.NCF file to allow the patch to work properly.
  52.  
  53. -----------------------------------------------------------------
  54. COMPRFIX NLM
  55. ============
  56.  
  57. SYMPTOM
  58.  
  59. A case has been found where compression will causes an ABEND when server
  60. memory is low and there has been several attempts for the compressor to get
  61. more memory.
  62.  
  63. SOLUTION
  64.  
  65. Apply COMPRFIX NLM.      1487 03-28-94   9:03a
  66.  
  67. Solution Specifics:
  68.  
  69. Versions of this patch will run on the following NetWare operating systems: 
  70.      4.01
  71.  
  72. -----------------------------------------------------------------
  73. COMPVLFX NLM
  74. ============
  75.  
  76. SYMPTOM
  77.  
  78. After a compressed file (*.exe, *.com, *.bat) is copied to a volume with
  79. compression turned off then executed, CCDSetFile is called with invalid file. 
  80. SOLUTION
  81.  
  82. Apply COMPVLFX NLM.     1636 12-21-93   9:07a
  83.  
  84. Solution Specifics:
  85.  
  86. Versions of this patch will run on the following NetWare operating systems: 
  87.      4.01
  88.  
  89. This patch fixes CCDSetFile called with invalid file.  This occurs after a
  90. compressed file  (*.exe, *.com, *.bat) is copied to a volume with compression
  91. turned off then executed.
  92.  
  93. -----------------------------------------------------------------
  94. CRDIRFIX NLM
  95. ============
  96.  
  97. SYMPTOM
  98.  
  99. The following error is returned if an attempt is made to create a directory
  100. with an blank character (Alt+255) as the last character in the name. 
  101.  
  102. MESSAGE
  103.  
  104.      Unable to create directory
  105.  
  106. SOLUTION
  107.  
  108. Apply CRDIRFIX NLM.      1313 02-22-94   4:22p
  109.  
  110. Solution Specifics:
  111.  
  112. Versions of this patch will run on the following NetWare operating systems: 
  113.      3.12, 4.01
  114.  
  115. Fix to allow the addition of a blank Character (Alt+255) to the end of a
  116. directory name.
  117.  
  118. NetWare 3.11 allows the user to create directories for security reasons that
  119. have a "blank"(Alt+255) as the last character of the directory name.  To allow
  120. Netware 3.12 and 4.01 to have a  blank Character (Alt+255) to the end of a
  121. directory name, apply this patch.
  122.  
  123. Example:  md test(Alt+255)
  124.  
  125. This works in DOS and on a NetWare 3.11 server.
  126.  
  127. -----------------------------------------------------------------
  128. DAICCFIX NLM
  129. ============
  130.  
  131. SYMPTOM
  132.  
  133. If an error condition occurs, such as reaching the end of a tape, an error
  134. code is returned to the calling application.  The error code would be
  135. scrambled, resulting in the wrong error passed to the application.  The
  136. result, as far as the Server (that is ABEND, hang, and so forth) would depend
  137. on the specific application.
  138.  
  139. SOLUTION
  140.  
  141. Apply DAICCFIX NLM.      1031 02-08-94   9:47a
  142.  
  143. This patch deals with applications that directly control hardware devices
  144. through NetWare (that is, Jukeboxes, worms, tapes, and so forth).  The patch
  145. applies to applications that use a DAI interface to communicate with the
  146. server's hardware.  Check with the vendor of the application to verify the use
  147. of the DAI interface and apply the patch if necessary.
  148.  
  149. Solution Specifics:
  150.  
  151. Versions of this patch will run on the following NetWare operating systems: 
  152.      3.12, 4.01
  153.  
  154. -----------------------------------------------------------------
  155. DEVIOFIX NLM
  156. ============
  157.  
  158. SYMPTOM
  159.  
  160. Problem reported by Compaq with devices using DAI emulation.  Insight Manager,
  161. on NetWare 4.01 servers, with a failed storage device, may show the device as
  162. grey, rather than red.  Insight Manager, on NetWare 4.01 servers, with a
  163. manually deactivated storage device, may show the device as grey, rather than
  164. green.  This is a problem that applies to devices using DAI emulation. 
  165.  
  166. SOLUTION
  167.  
  168. Apply DEVIOFIX NLM.      1024 08-23-93   3:16p
  169.  
  170. Solution Specifics:
  171.  
  172. Versions of this patch will run on the following NetWare operating systems: 
  173.      4.01
  174.  
  175. -----------------------------------------------------------------
  176. DFSRFIX  NLM
  177. ============
  178.  
  179. SYMPTOM
  180.  
  181. When using Direct File System Read, the time stamp on the file is updated each
  182. time the file is read.
  183.  
  184. SOLUTION
  185.  
  186. Apply DFSRFIX  NLM.       925 03-28-94   9:07a
  187.  
  188. Solution Specifics:
  189.  
  190. Versions of this patch will run on the following NetWare operating systems: 
  191.      4.01
  192.  
  193. -----------------------------------------------------------------
  194. DIRSPCFX NLM
  195. ============
  196.  
  197. SYMPTOM
  198.  
  199. Disk space cannot be accounted for.
  200.  
  201. CAUSE
  202.  
  203. The Set parameter only searched one of the mirrored tables for extended
  204. attributes to verify that the limit had been met, which allows the set
  205. parameter to use twice as much space as indicated.  The Table for Extended
  206. Attributes will grow; however, it will never decrease in size.  So, after the
  207. space is allocated for the EA table, it cannot be used for any thing other
  208. than Extended Attributes.
  209.  
  210. SOLUTION
  211.  
  212. Apply DIRSPCFX NLM.      1128 02-22-94   4:20p
  213.  
  214. Solution Specifics:
  215.  
  216. Versions of this patch will run on the following NetWare operating systems: 
  217.      3.11, 3.12, 4.01
  218.  
  219. The DIRSPCFX.NLM file is a fix to the set parameter "Maximum Percent of Volume
  220. Used By Directory."  The limits of this set parameter are 5 to 50 percent
  221. default and the setting is 13 percent.
  222.  
  223. The set parameter "Maximum Percent of Volume Used By Directory" can use double
  224. the disk space set.
  225.  
  226. Example:
  227.  
  228. If the Set parameter is 13 percent, the actual space that can be used by
  229. Extended Attributes is 26 percent.
  230.  
  231.  
  232. -----------------------------------------------------------------
  233. EADATFIX NLM
  234. ============
  235.  
  236. SYMPTOM
  237.  
  238. A problem exists with Extended Attributes when performing a drag and drop COPY
  239. of a directory structure from an OS/2 client.  Which would cause the Extended
  240. Attribute for the new Parent Directory to be corrupt.
  241. VREPAIR returned the following error message:
  242.  
  243.      Error at extended directory entry xxxx
  244.      Invalid Data error
  245.      Invalid Score card error
  246.  
  247. SOLUTION
  248.  
  249. Apply EADATFIX NLM.       997 03-28-94   9:08a
  250.  
  251. Solution Specifics:
  252.  
  253. Versions of this patch will run on the following NetWare operating systems: 
  254.      3.11, 3.12, 4.01
  255.  
  256. To install the patch, load patchman for the operating system that is running
  257. and the version of EADATFIX.NLM in the same directory.
  258.  
  259. -----------------------------------------------------------------
  260. EAREPLFX NLM
  261. ============
  262.  
  263. SYMPTOM
  264.  
  265. The following errors could be seen on a OS/2 Client:
  266.  
  267. 1.   "The Drive ";,is not a valid Drive"
  268. 2.   " " " is either read-only or is being used by another program" 
  269. These errors would be received when using the drives ICON from the DESKTOP to
  270. view a NetWare volume and most often with a CD-ROM mounted volume.  Sometimes
  271. after receiving these errors, the connection to the File Server would be lost.
  272.  
  273. SOLUTION
  274.  
  275. Apply EAREPLFX NLM.      1169 02-22-94   4:23p
  276.  
  277. Solution Specifics:
  278.  
  279. Versions of this patch will run on the following NetWare operating systems: 
  280.      3.11, 3.12, 4.01
  281.  
  282. Also it is suggested to use NetWare Requester for OS/2 v2.10 to help correct
  283. the problem.
  284.  
  285. -----------------------------------------------------------------
  286. EASCORFX NLM
  287. ============
  288.  
  289. SYMPTOM
  290.  
  291. A problem exists with Extended Attributes on files that have been deleted. 
  292. When a file with extended attributes was deleted, the Directory Entry was
  293. changed to reflect the deleted state of the file.  The Extended Directory
  294. Entries for the Extended Attributes were not all updated to correctly reflect
  295. this deleted state.
  296.  
  297. The following error messages would be seen when running VREPAIR: 
  298.      Error at extended directory entry XXXX
  299.      Invalid data error
  300.      Invalid score card error
  301.  
  302. SOLUTION
  303.  
  304. Apply EASCORFX NLM.      1062 11-09-93  10:59a
  305.  
  306. Solution Specifics:
  307.  
  308. Versions of this patch will run on the following NetWare operating systems: 
  309.           3.11, 4.01
  310.  
  311. Run VREPAIR on all volume to correct all Invalid data errors and Invalid score
  312. card errors, then load EASCORFX.NLM.
  313.  
  314. -----------------------------------------------------------------
  315. EAUNIQFX NLM
  316. ============
  317.  
  318. SYMPTOM
  319.  
  320. A problem exists with Extended Attributes on files that have been deleted. 
  321.  
  322. When a file with extended attributes was deleted, the extended directory entry
  323. for the file was not updated properly to reflect the deleted status of the
  324. file.
  325.  
  326. The following error messages would be seen when running VREPAIR: 
  327.      -Error at file entry XXXX
  328.      Original Entry - Deleted DOS file entry
  329.      Name: yyyy
  330.      Size: zzzz
  331.      The Extended Attribute / Directory information is Invalid 
  332.      Corrected Entry - Deleted DOS file entry
  333.      Name: yyyy
  334.      Size: zzzz
  335.  
  336. SOLUTION
  337.  
  338. Apply EAUNIQFX NLM.      1147 11-09-93  11:02a
  339.  
  340. Solution Specifics:
  341.  
  342. Versions of this patch will run on the following NetWare operating systems: 
  343.      3.11, 4.01
  344.  
  345. Run VREPAIR on all volume to correct all Invalid data errors and Invalid score
  346. card errors, then load EASCORFX.NLM.
  347.  
  348. -----------------------------------------------------------------
  349. ELEVFIX  NLM
  350. ============
  351.  
  352. SYMPTOM
  353.  
  354. A window exist where two identical requests to access the same sector on the
  355. hard disk could get placed in the elevator queue at the same time resulting in
  356. a file server lock up.
  357.  
  358. SYMPTOM
  359.  
  360. The file server may possibly hang when a system is in the process of
  361. remirroring and when there is extremely high I/O traffic on the bus. 
  362.  
  363. SOLUTION
  364.  
  365. Apply ELEVFIX  NLM.      1650 02-22-94   4:24p
  366.  
  367. Solution Specifics:
  368.  
  369. Versions of this patch will run on the following NetWare operating systems: 
  370.      3.12, 4.01
  371.  
  372. -----------------------------------------------------------------
  373. EXTENDFX NLM
  374. ============
  375.  
  376. SYMPTOM
  377.  
  378. The following message appears on the console.
  379.  
  380.  
  381. MESSAGE
  382.  
  383.      User <username> on connection <connectionnumber>
  384.      attempted to extend the length of a file with no
  385.      owner  File Name <filename>
  386.  
  387. SYMPTOM
  388.  
  389. At the workstation, a message indicating that the disk is full may be
  390. received.
  391.  
  392. SOLUTION
  393.  
  394. Apply EXTENDFX NLM.       986 11-11-93  12:07p
  395.  
  396. Solution Specifics:
  397.  
  398. Versions of this patch will run on the following NetWare operating systems: 
  399.      4.01
  400.  
  401.  
  402. THIS PATCH MUST BE LOADED BEFORE ANY VOLUMES ARE MOUNTED AND CAN BE LOADED
  403. FROM THE STARTUP.NCF.
  404.  
  405. This patch does not change the ownership of the file but will allow files with
  406. no owner to be extended.  Disk space being used by files with no owner will
  407. not be added to the disk space used by the user that is attempting to extend
  408. the file.  This is not a problem unless disk space usage is being limited for
  409. the specified user.
  410.  
  411. -----------------------------------------------------------------
  412. GNSOFFFX NLM
  413. ============
  414.  
  415. SYMPTOM
  416.  
  417. With "reply to get nearest server" set off, the specified server still
  418. responds first to workstations loading the NetWare Requester. 
  419.  
  420. SOLUTION
  421.  
  422. Apply GNSOFFFX NLM.      1049 02-23-94  11:36a
  423.  
  424. Solution Specifics:
  425.  
  426. Versions of this patch will run on the following NetWare operating systems: 
  427.      4.01
  428.  
  429. The above mentioned set parameter was designed to stop the file server from
  430. responding while still allowing other services on the specified server to
  431. reply.  With NetWare 4, while the file server is not responding, the Directory
  432. service is responding to the workstations allowing them to attach to the
  433. specified server.  On the server that you have the "set reply to get nearest
  434. server = off" parameter, load the GNSOFFFX.NLM patch.
  435.  
  436. -----------------------------------------------------------------
  437. LOSTSRFX NLM
  438. ============
  439.  
  440. SYMPTOM
  441.  
  442. When a Cisco router sends a SAP packet whose first SAP entry has the service
  443. type set to 0000 (unknown service), the NetWare 4.01 server ignores all SAPs
  444. contained in that packet.  This will cause the NetWare 4.01 server to accept
  445. any SAP from that packet.  Therefore, NLIST SERVERS /B doesn't show certain
  446. servers.
  447.  
  448. SOLUTION
  449.  
  450. Apply LOSTSRFX NLM.       959 03-30-94   1:19p
  451.  
  452. Solution Specifics:
  453.  
  454. Versions of this patch will run on the following NetWare operating systems: 
  455.      4.01
  456.  
  457. -----------------------------------------------------------------
  458. MEMFRGFX NLM
  459. ============
  460.  
  461. SYMPTOM
  462.  
  463. on servers that have greater than 80 megabytes of server RAM and that have
  464. large amounts of volume space to mount.
  465.  
  466. A client was creating directories on the network volume. At about 125,000
  467. directories, the following errors occurred:
  468.  
  469. At the workstation:
  470.  
  471. MESSAGE
  472.  
  473.      SHELL-331-92: Out of dynamic work space during CREATE A      SUBDIRECTORY
  474. Abort, Retry?
  475.  
  476. At the server console:
  477.  
  478. MESSAGE
  479.  
  480.      SERVER-4.0-2335:  Error expanding SERVERNAME/VOLUME
  481.      directory because directory size limit was reached.
  482.  
  483. TROUBLESHOOTING
  484.  
  485. After this condition was achieved and the volume was dismounted, it would fail
  486. to mount with an error message at the server console:
  487.  
  488. MESSAGE
  489.  
  490.      SERVER-4.00-4.25: Insufficient memory for directory tables. 
  491. These errors with lots of available cache are indicators of the segmented
  492. memory problem.
  493.  
  494. SOLUTION
  495.  
  496. Apply MEMFRGFX NLM.      2582 03-28-94   9:12a
  497.  
  498. Solution Specifics:
  499.  
  500. Versions of this patch will run on the following NetWare operating systems: 
  501.      4.01
  502.  
  503. MEMFRGFX.NLM addresses an issue on NetWare where a server would run out of
  504. memory while mounting the volume or when dynamically expanding the directory
  505. entry table.  This MEMFRGFX.NLM patch fixes this problem by providing an
  506. alternate method of registering server memory for NetWare 4.01. 
  507. It fixes a condition where the normal auto registration of memory would
  508. represent memory with non-contiguous blocks.  Consequently, only a portion of
  509. memory is available for mounting volumes and growing the directory entry. 
  510. This condition will only manifest itself on servers that have greater than 80
  511. megabytes of server RAM and that have large amounts of volume space to mount. 
  512. To install and implement this version of MEMFRGFX.NLM:
  513.  
  514. 1.  Copy MEMFRGFX.NLM to the same directory where SERVER.EXE and the
  515. STARTUP.NCF files reside.
  516.  
  517. 2.  Modify the startup .ncf file and add the set parameter, "set auto register
  518. memory above 16 megabytes=off" as the first line.
  519.  
  520. 3.  After disabling the auto registration of memory and before loading any
  521. other driver or patch, load the MEMFRGFX.NLM patch with the following syntax: 
  522. LOAD MEMFRGFX.NLM <STARTING MEMORY ADDRESS>  <LENGTH>
  523.  
  524. The <starting memory address> will always be 1000000 hex (16 MB).  The
  525. <length> in hex can be calculated by taking the total amount of File Server
  526. memory as reported by the hardware memory POST, converting that number to
  527. hexadecimal and then subtracting 1000000 hex therefrom.
  528.  
  529. For example, if the file server POST reports 163840 KB of RAM, the calculation
  530. would be as follows:
  531.  
  532.      163,840KB = 1024x163840 = 167772160 bytes = A000000 hex bytes
  533.      A000000 hex minus 1000000 hex = 9000000 hex
  534.  
  535. In this case, the command would be the following:
  536.  
  537.      LOAD MEMFRGFX.NLM 1000000 9000000
  538.  
  539. 4.   You can then proceed with the loading of any other STARTUP.NCF commands
  540. as usual.
  541.  
  542. -----------------------------------------------------------------
  543. MMACCFIX NLM
  544. ============
  545.  
  546. SYMPTOM
  547.  
  548. The workstation will hang while performing reads from the file server.  High
  549. (100%) utilization at the server console.  By typing "scan for new devices" at
  550. the console prompt, the high utilization drops but will climb back up over
  551. time.
  552.  
  553. SOLUTION
  554.  
  555. Apply MMACCFIX NLM.       960 11-09-93  10:10a
  556.  
  557. Solution Specifics:
  558.  
  559. Versions of this patch will run on the following NetWare operating systems: 
  560.      3.12, 4.01
  561.  
  562. MMACCFIX.NLM fixes this condition by patching the media manager accelerator
  563. module of the NetWare 4.01 operating system code.  This patch is recommended
  564. for general application on all NetWare 4.01 servers.
  565.  
  566. -----------------------------------------------------------------
  567. PBWANFIX NLM
  568. ============
  569.  
  570. SYMPTOM
  571.  
  572. WAN links saturated with packets.
  573.  
  574. SOLUTION
  575.  
  576. Apply PBWANFIX NLM.      1291 10-18-93  11:39a
  577.  
  578. Solution Specifics:
  579.  
  580. Versions of this patch will run on the following NetWare operating systems: 
  581.      3.12, 4.01
  582.  
  583. Description of problem addressed by PBWANFIX.NLM.  Due to the nature of packet
  584. burst, it is very easy to saturate WANS with packets that have already been
  585. sent and arrived correctly.
  586.  
  587. -----------------------------------------------------------------
  588. REALMFIX NLM
  589. ============
  590.  
  591. SYMPTOM
  592.  
  593. If an error condition occurs such as reaching the end of a tape, an error code
  594. is returned to the calling application.  The error code would be scrambled,
  595. resulting in the wrong error passed to the application.  The result, as far as
  596. the Server (that is ABEND, hang, and so forth) depends on the specific
  597. application.
  598.  
  599. SYMPTOM
  600.  
  601. Application requests made to a device driver using the DeviceIOCTL and
  602. DeviceBlockingIOCTL APIs are aborted if NetWare is in the process of switching
  603. to real mode (that is the DOS Mode semaphore is set).  The APIs should instead
  604. delay the execution of the request.
  605.  
  606. SOLUTION
  607.  
  608. Apply REALMFIX NLM.      2756 02-08-94   9:37a
  609.  
  610. Solution Specifics:
  611.  
  612. Versions of this patch will run on the following NetWare operating systems: 
  613.      3.12, 4.01
  614.  
  615. This patch deals with applications that directly control hardware devices
  616. through NetWare (that is Jukeboxes, worms, tapes, and so forth). The patch
  617. applies to applications that use a DAI interface to communicate with the
  618. server's hardware.  Check with the vendor of the application to verify the use
  619. of the DAI interface and apply the patch if necessary. 
  620. This patch fixes two DAI emulation bugs:
  621.  
  622. Fixed the device IOCTL routine to return the driver specified error code
  623. instead of the media manager code.
  624.  
  625. Fixed the IOCTL routines to postpone the execution of the IOCTL if the
  626. DOSDiskSemaphore is set instead of returning with an error. 
  627. -----------------------------------------------------------------
  628. RTCHGFIX NLM
  629. ============
  630.  
  631. SYMPTOM
  632.  
  633. When packet signing was enabled and a switch over occurs on an NetWare SFT III
  634. server or a router switch over, the workstation would timeout or appear to be
  635. hung.
  636.  
  637. CAUSE
  638.  
  639. When the switch over occurs, the packet size would be renegotiated between the
  640. server and the workstation.  The server in would send unsigned packets to the
  641. workstation during the renegotiation process.  The workstation, expecting
  642. signed packets discards all of the packets from the server attempting the
  643. renegotiation.  The workstation would eventually timeout or appear to be hung.
  644. SOLUTION
  645.  
  646. Apply RTCHGFIX NLM.       952 12-21-93  11:38a
  647.  
  648. Solution Specifics:
  649.  
  650. Versions of this patch will run on the following NetWare operating systems: 
  651.      3.12, 4.01
  652.  
  653. This patch fixes a problem with packet signing after a switch over occurs on
  654. an NetWare SFT III server or a router switch over (that is networks with
  655. redundant routes).  The key to the patch is that packet signing would have to
  656. be enabled for this problem to happen.
  657.  
  658. ----------------------------------------------------------------
  659. SPXDDFIX NLM
  660. ============
  661.  
  662. SYMPTOM
  663.  
  664. If the connection had already transitioned into SESSION_TERMINATED when the
  665. retry came in, it was treated as a new connection request. 
  666.  
  667. SYMPTOM
  668.  
  669. Data was handled incorrectly by an application.
  670.  
  671. CAUSE
  672.  
  673. SPX was still acknowledging data packets that arrived after
  674. SPXTerminateConnection was called; therefore, data that arrived after the
  675. application initiated a disconnect by calling SPXTerminateConnection, was
  676. acknowledged and delivered to the application.  Depending on how the
  677. application was written this could give the transmitting side an invalid
  678. picture of the guaranteed delivery of the data by leaving both endpoints with
  679. different information about the state and completeness of the data. 
  680.  
  681. SOLUTION
  682.  
  683. Apply SPXDDFIX NLM.      1112 03-10-94   9:45a
  684.  
  685. Solution Specifics:
  686.  
  687. Versions of this patch will run on the following NetWare operating systems: 
  688.      3.12, 4.01
  689.  
  690. This patch fixes the problem with the way SPX handles retried connect
  691. requests.  The patch causes all inbound packets after SPXTerminateConnection
  692. has been called to just be dropped.
  693.  
  694. Also fixes a problem where SPX was still acknowledging data packets that
  695. arrived after SPXTerminateConnection was called.  This could lead to incorrect
  696. handling of the data by the application, leaving both endpoints with different
  697. information about the state and completeness of the data.
  698.  
  699. NOTE: This SPX problem is masked by the SPXS.NLM that ships with NMS 2.0 and
  700. SPXS.NLM included in STRTL2.EXE.  The fix for this specific issue is addressed
  701. by SPXDDFIX.NLM.
  702.  
  703. -----------------------------------------------------------------
  704. SPXFIX2  NLM
  705. ============
  706.  
  707. SYMPTOM
  708.  
  709. An SPX terminate ack is received on a non-existent session. 
  710.  
  711. CAUSE
  712.  
  713. This bug is a side effect of SPXFIX2 v2.00 (that is native to NetWare 3.12)
  714. that leaves SPX terminate ack packets in system ECBs rather than copying them
  715. into application ECBs.
  716.  
  717. SOLUTION
  718.  
  719. Apply SPXFIX2  NLM.      1023 11-23-93   8:52a
  720.  
  721. Solution Specifics:
  722.  
  723. Versions of this patch will run on the following NetWare operating systems: 
  724.      3.12, 4.01
  725.  
  726. This patch fixes SPX code in the case where an SPX terminate ack is received
  727. on a non-existent session.  When the terminate ack is received and the session
  728. does not exist, this fix returns the ECB to IPX rather than reposting it to
  729. the application socket.
  730.  
  731. -----------------------------------------------------------------
  732. SYNCMFIX NLM
  733. ============
  734.  
  735. SYMPTOM
  736.  
  737. One drive off of one HBA is mirrored to two drives both of which are on the
  738. other HBA.  (A total of three drives mirroring the same data).  The single
  739. drive off of the first HBA is in sync and the other two drives off of the
  740. second HBA are mirrored to the first drive.  The server is downed while the
  741. two secondary mirrored drives are still out of sync, (install NLM shows them
  742. still to be in the mirroring process).
  743.  
  744. When SERVER.EXE is invoked, INSTALL.NLM shows the primary drive as In Sync and
  745. one of the secondary drives as In Sync and the other as Out Of Sync.  The two
  746. secondary drives are the only ones showing disk activity as if they are
  747. mirroring each other and ignoring the actual in sync primary drive. 
  748.  
  749. SOLUTION
  750.  
  751. Apply SYNCMFIX NLM.       974 11-09-93  10:50a
  752.  
  753. Solution Specifics:
  754.  
  755. Versions of this patch will run on the following NetWare operating systems: 
  756.      3.12, 4.01
  757.  
  758. The problem is resolved by loading the SYNCMFIX.NLM patch.  You must load the
  759. patch manager (PM401.NLM) and the SYNCMFIX.NLM in the startup.ncf before the
  760. disk driver or move the disk driver load statements to the AUTOEXEC.NCF and
  761. have them loading after the patch manager and the SYNCMFIX.NLM patch. 
  762. -----------------------------------------------------------------
  763. UNLDIRFX NLM
  764. ============
  765.  
  766. SYMPTOM
  767.  
  768. ABEND "UnLockDirectoryEntry called with entry that was already unlocked"
  769. happens in INWPurgeTrustee when UnLockDirectoryEntry is called with
  770. TNode->TFileEntryNumber that sometimes gets overwritten by the call to
  771. ImmediateReuseGetDirectoryEntry.
  772.  
  773. Whenever the directory structure for the file entry isn't in RAM,
  774. ImmediateReuseGetDirectoryEntry reads in a directory block over the top of the
  775. current block and invalidates the TNode pointer.
  776.  
  777. NOTE: Locking the file entry doesn't guarantee the TNode is locked. 
  778.  
  779. SOLUTION
  780.  
  781. Apply UNLDIRFX NLM.      1807 04-13-94   9:38a
  782.  
  783. Solution Specifics:
  784.  
  785. Versions of this patch will run on the following NetWare operating systems: 
  786.      3.11, 3.12, 4.01
  787.  
  788. Self-Extracting File Name:  401PT2.EXE     Revision:  A
  789.  
  790. Files Included     Size     Date      Time
  791.  
  792. \
  793.   401PT2.TXT         (This File)
  794.    PM401.NLM       8113   02-03-94    1:09a
  795.    PM401.TXT       3674   06-08-94   11:53a
  796.  DFSRFIX.NLM        925   03-28-94    9:07a
  797.  ELEVFIX.NLM       1650   02-22-94    4:24p
  798.  SPXFIX2.NLM       1023   11-23-93    8:52a
  799. BCKTTSFX.NLM        932   03-28-94    8:49a
  800. COMPRFIX.NLM       1487   03-28-94    9:03a
  801. COMPVLFX.NLM       1636   12-21-93    9:07a
  802. CRDIRFIX.NLM       1313   02-22-94    4:22p
  803. DAICCFIX.NLM       1031   02-08-94    9:47a
  804. DEVIOFIX.NLM       1024   08-23-93    3:16p
  805. DIRSPCFX.NLM       1128   02-22-94    4:20p
  806. EADATFIX.NLM        997   03-28-94    9:08a
  807. EAREPLFX.NLM       1169   02-22-94    4:23p
  808. EASCORFX.NLM       1062   11-09-93   10:59a
  809. EAUNIQFX.NLM       1147   11-09-93   11:02a
  810. EXTENDFX.NLM        986   11-11-93   12:07p
  811. GNSOFFFX.NLM       1049   02-23-94   11:36a
  812. LOSTSRFX.NLM        959   03-30-94    1:19p
  813. MEMFRGFX.NLM       2582   03-28-94    9:12a
  814. MMACCFIX.NLM        960   11-09-93   10:10a
  815. NCPIDFIX.NLM       1837   01-18-94    4:22p
  816. PBWANFIX.NLM       1291   10-18-93   11:39a
  817. REALMFIX.NLM       2756   02-08-94    9:37a
  818. RTCHGFIX.NLM        952   12-21-93   11:38a
  819. SPXDDFIX.NLM       1112   03-10-94    9:45a
  820. SYNCMFIX.NLM        974   11-09-93   10:50a
  821. UNLDIRFX.NLM       1807   04-13-94    9:38a
  822.  
  823. Installation Instructions:
  824.  
  825. See solution specific for specific patch application instructions. 
  826.  
  827. ----------------------------------------------------------------
  828. Any trademarks referenced in this document are the property of their
  829. respective owners.  Consult your product manuals for complete trademark
  830. information.
  831. ---------------------------------------------------------------- 
  832.