home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
IBM Presents OS/2 Software Hits 1995
/
OS-2_SW_HITS_2ND_EDITION_1995.ISO
/
i05
/
m76pmd.dsk
/
unc.dsk
/
O21READ.ME
< prev
next >
Wrap
Text File
|
1994-01-26
|
1KB
|
30 lines
OS/2 2.1 Device Drivers - Enhanced Local Bus Graphics
Installation Instructions:
1. Ensure you are running this installation program from an OS/2* 2.1 DOS full
screen command prompt.
2. If you have not already installed the DMQS files, changed your display
profile, and installed the VESA SVGA BIOS extension, select the first
option on the main menu to get to the VESA SVGA BIOS Extension menu. Then
follow the prompts to install the DMQS files, change your display profile,
and install the BIOS extension.
3. Follow the instructions in the README.S3 file on the diskette labeled
"Local Bus Graphics Device Drivers for OS/2 2.1." When asked to choose an
installation method, choose "Install Using Defaults" and not "Install Using
Display Adapter Utility Program."
Note: if in the future you wish to change your display, you will need to
use INST7677 to change your display profile, open another DOS command prompt,
and run the SVGA ON command, all prior to connecting your new display.
Note 2: if you subsequently install the OS/2 XGA* drivers, you will need to
remove the SET DMQSPATH statement from your CONFIG.SYS file prior to restarting
your system.
=========================================================================
* Trademark of the IBM Corporation.