home *** CD-ROM | disk | FTP | other *** search
-
- 360K FLOPPY DRIVE SYSTEM
-
- Although NOT recomended TOTAL HAM will run on a 360K floppy system.
- The two dynamic files LOG.DAT & QSLMAN.DAT & .IDX'S will increase in size as
- entries are added. The others are of fixed size. Log entries will increase
- LOG.DAT by approximately 200 bytes (LOG.IDX by 24 bytes). QSL manager entries
- will increase QSLMAN.DAT by approximately 65 bytes (QSLMAN.IDX by 24 bytes).
- The combination of these will determine the number of entries the program
- will handle. Log only should hold approximately 1400 entries.
- Since this program is very disk intensive, speed suffers dramatically.
-
- 360K FLOPPY SYSTEM SET UP
-
- UNARC TOTLHAMU.ARC FIRST:
-
- 1 - Make a bootable disk & have two (2) blank disks ready.
- 2 - Place bootable disk in drive b:
- 3 - Run 360k-1.bat
- 4 - Place blank disk in drive b:
- 5 - Run 360k-2.bat
- 4 - Make this disk DATA DISK B.
- 5 - Make other blank disk DATA DISK A.
- 6 - Move LOG.DAT & LOG.IDX to DATA DISK A.
- 7 - Place your get clock(time) program on bootable disk & set up the
- appropriate AUTOEXEC.BAT file to read it.
-
- The BOOT DISK (A DRIVE) should have:
- Normal system files
- TOTLHAMx.EXE
- CONFIG.SYS - files need to be 20
- TOTLHAMx.DOC
- FLOPPY.DOC
- REGISTER.DOC
- UPGRADE.*
-
- The DATA DISK A (A DRIVE) should have:
- LOG.DAT
- LOG.IDX
-
- The DATA DISK B (B DRIVE) should have:
- BEAM.DAT
- BEAM.IDX
- COUNTRY.DAT
- COUNTRY.IDX
- QSL.DAT
- QSL.IDX
- STATE.DAT
- STATE.IDX
-
- TOTAL HAM will prompt you to change the boot disk with DATA DISK A at the
- proper time. This change will allow maximum space for you log. Other
- support files will be on B drive.