home *** CD-ROM | disk | FTP | other *** search
-
- -------------------------------------------------------------------------------
- GENERAL COVERAGE MOD FOR YAESU FT-747GX
- -------------------------------------------------------------------------------
-
- 1.) Remove top cover.
-
- 2.) On backside of display unit there is a brown jumper wire near the large
- ribbon cable.
-
- 3.) Cut this jumper.
-
- 4.) Turn radio on and set display for 12.345.6 then turn radio off then on.
-
- 5.) This enables the general coverage mode and a GEN display will come on
- and stay on at the top of the LCD display.
-
- 6.) Reassemble the unit. It will now transmit everywhere it receives,
- however Yaesu recommends that it only transmit from 1.8 - 30 MHz.
-
- RELAYED BY...N0KGX...GENE
-