home *** CD-ROM | disk | FTP | other *** search
- FT411
-
- Subject: FT-411 OUT OF BAND MODIFICATIONS
- Date: 08 Feb 89
-
- 1) Open the front cover
- 2) Locate the C.P.U. unit (it is located on the front cover ).
- 3) Locate Jumpers 1,2,3 and 4 , These are the band setting Jumpers
- 4) Jumpers No 1,2 and 4 should be disconnected ,and Jumper No 3 should
- be connected.
- 5) Close the radio .
- 6) Apply power to the radio and turn it on.
- The display will initialize with memory No 1 flashing and the
- frequency display will show 1.000
- 7) Now , adjust the display to the desired lowest receive frequency
- When done ,press VFO.
- The memory CH will now show 2 flashing .
- 8) Adjust the display to the desired highest receive frequency
- When done press VFO .
- The memory CH will now show 3 flashing .
- 9) Adjust the display to the desired lowest transmit frequency
- When done ,press VFO.
- The memory CH will now show 4 flashing .
- 10) Now , adjust the display to the desired highest transmit frequency
- When done ,press VFO.
- 11) The rig is now set for your programed band on transmit and receive.
- CONTINUED IN FILE FT411.4
-