Key state names in full or use the abbreviations shown above. Key city name followed by (, ) and the name of the state as in (DENVER, CO) or (Denver, Colorado) or (DENVER, COLORADO) When keying cities within the same state; the state name need not be repeated after each city entry. When no more entries are to be keyed; press the ENTER once more. The last entry must be a city on the Data Disk. ---- THIS FILE SEARCH WILL TAKE ABOUT 10 SECONDS ---- When a comma (,) follows a city name, be sure to key the name of the state following as in (DENVER, CO) This city or place was not found on the Data Disk. Try another entry. NOTE; 99 entries have been recorded; the maximum is 100 I hope this program was informative. is not the correct spelling of a state. ***** GENERATING THE BOUNDARY ***** Press any key to list more cities **** Be sure to include the name of the state on the first entry **** states remaining PRESS ANY KEY TO CONTINUE state remaining PRESS ANY KEY TO CONTINUE on this diskette PRESS ANY KEY TO CONTINUE Use 2 digits for degrees and 2 digits for minutes The first digit must be a number Minutes must be less than 60 Latitude must be less than 90 degrees latitude must be N or S Use 2 or 3 digits for degrees and 2 digits for minutes The first digit must be a number Minutes must be less than 60 Longitude must be less than 180 degrees Longitude must be E or W PRESS ANY KEY TO CONTINUE Key the Minimum and Maximum R values in that order, separated by a comma. The Minimum is 2 miles The Minimum must be less than or equal to the Maximum The Maximum R value is 200 ---- THIS FILE SEARCH VARIES FROM 10 SECONDS UP ---- The Minimum is 2 miles R must be no more than 200 miles R must be positive 400 is the Maximum number of cities for this parameter. For the first 100 cities printed; PRESS ANY KEY For the next 100 cities printed; PRESS ANY KEY No cities were found For the first *** DO NOT STRIKE ANY KEYS UNTIL THE BEEPER SOUNDS AGAIN *** PRESS ANY KEY to list more cities or places PRESS ANY KEY to return to the beginning of the program. ************************* OPTIONS ************************* (1) To find the location of a city or place in a given state. (2) To compute great-circle distance between cities in the USA (3) To compute great-circle distance between a given city and a known latitude-longitude, from any place on earth. (4) To locate cities with identical names but in different states. (5) To find the names of all cities within a given radius of a known place. (6) To find the names of all cities within a ring around a known place. (7) To show cities within a corridor 10 miles wide by 40 miles long. The first city defines one end while a second determines the direction. (8) Same as option (7) except compass angle (0-360) defines direction. (9) To find National Parks, Recreation Areas, and Places of interest. PRESS ANY KEY to print additional cities PRESS ANY KEY to return to OPTION screen (1) National Park (2) National Battlefield and Forts (3) National Memorial (4) National Seashore and Lakeshore (5) National Historic Site (6) National Historic Park (7) National Recreation Area (8) National Monument (9) National Places of Interest NOTE; To return to main OPTION screen, PRESS ENTER The number must be between 1 and 10 To find the locations of one or more of the places listed above; To see another screen for possibly entering more data; The numbers entered were not within range of the table 0 black, 1 blue, 2 green, 3 cyan, 4 red, 5 magenta, 6 brown, 7 white, 8 gray 9 Lt blue, 10 Lt green, 11 Lt cyan, 12 Lt red, 13 Lt magenta, 14 yellow For a color monitor, choose a number for the colors above or Hit ENTER for the default colors white on blue Please key a number between 0 to 7 Background color same as foreground color, please use another color Please key a number between 0 to 14 When using Option 3; the name of the state must be keyed On the first entry; include the state abbreviation. (10) State Parks and Places of Interest Alaska is not on this list; use only those states listed Hawaii is not on this list; use only those states listed Use only the abbreviations as listed above Key the appropriate numbers, using a comma between each. If you want to see the table again, Key Y, else With this option; places in Alaska and places in other states can not be shown simultaneously. With this option; places in Hawaii and places in other states can not be shown simultaneously. DO NOT strike any keys while the above message is on the screen
