219 An internal error has occurred. You may press the Details button for more information.
220 The test write completed without errors.
221 The disc write completed without errors.
222 The disc erase completed without errors.
223 The disc read completed without errors.
224 The disc subcode read completed without errors.
225 The operation completed without errors.
227 It appears that the drive is currently playing audio. Make sure that CD Player or another application is not currently playing the disc before continuing.
229 %d minute(s) %d second(s)
230 %d minute(s)
231 %d second(s)
232 Disc isn't Consumer Audio media.
233 Unable to use CD-RW media.
234 The audio is too long to fit in the time left on this disc.
236 The disc in the drive is already closed and can not be written. Insert a writeable disc and press OK to continue.
243 Read Only Disc
244 No Disc
245 Initializing
246 Please insert a write once disc in the drive and press OK to continue.
247 Waiting for Drive
248 Write
249 Writing Audio
250 Estimated time left: $d Seconds
251 Warning: Cancelling during a close session may leave some drives and your system in an unuseable state.\n\nAre you sure you want to cancel?
252 Warning: Cancelling during a test burn may leave some drives in an unuseable state.\n\nAre you sure you want to cancel?
253 Warning: If you cancel this operation, you will most likely end up with an unfinished track on your CD.\n\nAre you sure you want to cancel?
254 Test Writing Lead-In
255 Writing Lead-In
256 Test Writing Tracks
257 Test Writing Track
258 Writing Tracks
259 Writing Track
260 Test Writing Lead-Out
261 Writing Lead-Out
262 Preparing To Test Write
263 Preparing To Write
264 Spooling Data to CD Printer
265 Closing Disc
266 Waiting on CD Printer
270 The command completed without errors.
271 The command was canceled by the user.
272 The system is low on memory. Reduce the number of running applications and try again.
273 An illegal pointer was passed to a CDI function.
274 An illegal parameter was passed to a CDI function.
275 An illegal interface has been selected. Make sure the CDR software is correctly installed.
276 The operation is not supported by this drive.
277 You have not specified a drive to use.
278 The device for the drive could not be opened. The drive may be in use by another program.
279 The command failed due to a IOCTL error. Your interface or drive may be configured incorrectly.
280 An error occurred reading data from a file on the system. Make sure that you have access to all data files needed to write this disc.
281 An error occurred writing data to a file on the system. Make sure that you are not out of disk space.
282 The currently selected device is not a CD-Recordable drive or CD-ROM drive.
283 The disc doesn't contain Lead-Out information. This may be a corrupted or unfinished disc.
284 This drive can not write the current PQ list correctly. Press the details button for more information.
285 The disc in the drive is a read only disc.
286 There is no disc in the drive.
287 A drive error occurred.
288 The disc is not eraseable.
289 The drive is currently in use by another application. Please close any applications using the drive and try again.
290 An unknown drive error has occurred.
291 An unknown drive error has occurred.
292 There is no disc in the drive.
293 The drive is not ready.
294 The drive is busy processing a command.
295 A SCSI/IDE error has occurred. Check your SCSI/IDE configuration.
296 The drive has been reset, most likely by another application or due to a SCSI/IDE configuration problem.
297 The drive can not process this PQ list due to the fact it is either too large or contains an option the drive does not support.
298 The write failed due to a buffer underrun. This indicates your system can not keep up at this speed. Either lower your writing speed or close other applications while writing discs.
299 The disc is blank.
300 The disc is not blank.
301 A drive hardware error has occurred.
302 The disc is either dirty or corrupted.
303 The disc is not of a media type that is supported by this drive.
304 The drive has received an illegal command.
305 A play error has occurred.
306 The drive failed to load or eject a disk.
307 A read error occurred. The disc may be dirty or corrupted.
308 A write error occurred. The disc may be dirty or corrupted.
309 A seek error occurred. The disc may be dirty or corrupted.
310 The disc has changed.
311 A command failed due to an IOCTL error. Your SCSI/IDE card or drive may not be configured correctly.
312 The operation was canceled by the user.
313 The drive is becoming ready.
314 An error occurred opening a file on the system. Make sure that you have permission to access this file.
315 An error occurred creating a file on the system. Make sure that you have permission to write to this file or folder.
316 Permission was denied to log on to the CDDB Server.
317 The CDDB Server has too many users logged in. Try again later.
318 The CDDB Server's load is too high. Try again later.
319 An exact match could not be found in the CDDB database for this disc.
320 There is no entry in the CDDB database for this disc.
321 The entry in the CDDB database for this disc is corrupted.
322 An illegal argument count was passed to the CDDB server.
323 There is no entry in the CDDB database for this disc.
324 A server error occurred trying to get the CDDB database information.
325 An unknown error occurred trying to access the CDDB database.
328 A connection to the internet could not be established. If you are using a modem to connect to the internet make sure you are currently on-line.
329 A connection to the CDDB URL could not me made. If you are using a modem to connect to the internet make sure you are currently on-line.
330 No data was available from the CDDB server. If you are using a modem to connect to the internet make sure you are currently on-line.
331 An error occurred in retrieving data from the CDDB server.
332 Estimated time left: $d Minute $d Seconds
333 Estimated time left: $d Minutes $d Seconds
334 The Table of Contents on the disc is incorrect. The disc may be damaged or inserted in the drive incorrectly. Try reinserting the disc.
335 The write failed due to a buffer underrun. This indicates your system can not keep up at this speed. Either lower your writing speed or close other applications while writing discs.
336 Estimated time left: $d Minute
337 Estimated time left: $d Minutes
338 The drive couldn't determine the correct power for writing this disc. To solve this you need to use a different writing speed or a different brand of media.
339 Writing track %d of %d
340 The close operation has not completed and can not be safely canceled at this time. Please wait for the drive to finish closing the disc.
342 This drive does not support writing the information necessary to track serial copies.
343 Welcome to the Performance Wizard
344 This Performance Wizard is designed to help you optimize your system for use with %s.
347 Drives
349 Optimizing Drive
351 Multiple matches have been found in the CDDB database.
352 You have exceeded the number of accesses CDDB allows to the CDDB database in one day. You will have to wait until tomorrow to access the CDDB database.
4481 The loader did not pick up a disc. Make sure the unit is not jammed and is aligned correctly.
4482 The currently selected device is not a loader.
4483 An illegal destination was specified for the loader move command.
4484 An illegal source was specified for the loader move command.
4485 An unknown loader error has occurred.
4486 The current command for the loader failed.
4487 The loader received an illegal command or a command out of sequence.
4488 The loader appears to be jammed.
4489 A timeout occurred while waiting for a response from the loader. Check to make sure it is properly connected to the computer.
4490 The loader is empty. Please insert more recordable CD's in the hopper.
4491 The loader is not responding to commands. Check to make sure it is properly connected to the computer.
4493 No loader devices are configured for use.
4494 The command is not supported by this loader.
4495 An illegal interface has been selected. Make sure the loader software is correctly installed.
4496 An illegal parameter was passed to a loader function.
4497 An illegal pointer was passed to a loader function.
4498 The system is low on memory. Reduce the number of running applications and try again.
4499 The command was canceled by the user.
4500 The loader command completed without errors.
4985 An unknown printer error has occurred.
4988 An error occurred scheduling the printer job. Make sure you the printer is ready, you have permissions to use the printer, and the printer driver is installed correctly on your system.
4989 An error occurred writing to the file used for printer spooling. Make sure you are not low on temporary space, you have permissions to use the printer, and the printer driver is installed correctly on your system.
4990 A file could not be created for spooling to the printer. Make sure you have permissions to use the printer and the printer driver is installed correctly on your system.
4991 The printer is still printing.
4992 The printer device could not be opened. Make sure the printer device is installed correctly on your system.
4993 No printer devices are configured for use.
4994 The command is not supported by this printer.
4995 An illegal interface has been selected. Make sure the printer software is correctly installed.
4996 An illegal parameter was passed to a printer function.
4997 An illegal pointer was passed to a printer function.
4998 The system is low on memory. Reduce the number of running applications and try again.
4999 The command was canceled by the user.
5000 The printer command completed without errors.
8000 The command completed successfully.
8001 An error occurred and was recovered
8002 The drive is not ready.
8003 A medium error occurred.
8004 A hardware error occurred.
8005 An illegal request was received.
8006 The drive state has changed.
8007 The disc is write protected.
8008 Blank Check.
8009 Vendor Unique.
8010 The drive aborted during copying.
8011 The command was aborted.
8013 The end of the volume was reached.
8014 Mismatch in settings for source data.
8200 12V failure.
8201 1st Run-in Block.
8202 1st Run-out Block.
8203 2nd Run-in Block.
8204 2nd Run-out Block.
8205 3rd Run-in Block.
8206 4th Run-in Block.
8207 The drive has detected an abnormal spin. (NMI)
8208 The drive has detected an abnormal spin. (Servo IRQ)
8209 An absorption control error occurred.
8210 An actuator velocity control error occurred.
8211 A specified address is out of range.
8212 An ALPC error occurred during OPC execution.
8213 Alpha and power range error.
8214 Alpha lower range error.
8215 Alpha upper range error.
8216 The disc application code does not match the host application code.
8217 The transporter has received a bad command.
8218 Associated write protect.
8219 The drive can't read the ATIP code from the disc, probably due to dust or dirt on the disc.
8220 ATIP sub-code jumped.
8221 ATIP sync error.
8222 The transfer length specified exceeds the free space length of the current track.
8223 The audio address specified by the command is invalid.
8224 The drive has completed playing audio.
8225 The drive is not currently playing audio.
8226 The drive is currently paused.
8227 Audio playback has been aborted.
8228 The drive is currently playing audio.
8229 The drive stopped playing audio due to an error.
8230 The service password is wrong.
8231 A bar code read error occurred.
8232 The drive is becoming ready (reading TOC).
8233 Beta lower range error.
8234 Beta upper range error.
8235 Blank aread encountered on disc.
8236 The disc is blank.
8237 Block decoder error.
8238 Block encoder communication error.
8239 Block encoder path error.
8240 A block could not be found.
8241 The selected block size caused a mode conflict.
8242 Block size format conflict.
8243 Buffer data size error.
8244 The read aborted due to a buffer overflow. Try reading at a slower speed.
8245 Buffer overflow while reading all subcodes.
8246 The operation halted due to an buffer overrun.
8247 A buffer parity error occurred.
8248 The write operation was terminated due to buffer under run.
8249 A bus/device reset has occurred.
8250 A bus reset has occurred.
8251 The caddy is not in the drive.
8252 The Optimum Power Calibration area is nearly full. It is recommended the disc be fixated after this track is written.
8253 The disc can't be formatted. It is an incompatible format.
8254 The disc can't be read. It is an incompatible format.
8255 The disc can't be read. It is an unknown format.
8256 Can't recover from lead-in.
8257 Can't recover from lead-out.
8258 Can't recover from optical power.
8259 Can't recover from PMA.
8260 Can't recover from track.
8261 The table of contents could not be recovered.
8262 Can't write this disc. The application code is not of this type.
8263 The disc can't be written. It is an incompatible format.
8264 The disc can't be written. It is an unknown format.
8265 The carriage is not home.
8266 The carriage is not in position.
8267 Carriage position early.
8268 Carriage position late.
8269 The carriage is stuck.
8270 CDB Overrun.
8271 CD control error.
8272 CD pick failed at writer drawer.
8273 CD still on input jaw.
8274 CD still on write jaw.
8275 The drive has changed operating definition.
8276 An internal checksum error has occurred.
8277 The disc is dirty or damaged; unrecovered CIRC error.
8278 A cleaning cartridge is in the drive.
8279 Cleaning failure.
8280 The drive needs cleaning.
8281 A command was cleared by another initiator.
8282 A command was issued during the disconnected cycle.
8283 The command is not allowed in the current operational mode.
8284 A command was not accepted.
8285 The command is not valid at this time.
8286 Command phase error.
8287 Command phase time out.
8288 A command was rejected.
8289 A SCSI communication error occurred.
8290 A write preview has completed.
8291 A drive PROM error has occurred.
8292 The drive controller detected a RAM error.
8293 The disc could not be ejected.
8294 An ABORT message was received.
8295 DAC Error.
8296 Data-in phase time out.
8297 Data-out phase time out.
8298 Data phase error.
8299 The track length has been lengthened to meet the minimum length of 4 seconds.
8300 A data transfer error occurred.
8301 A device internal reset has occurred.
8302 The drive's internal buffer has failed diagnostics.
8303 The drive failed diagnostics for its internal buffer RAM.
8304 One or more components have failed diagnostics.
8305 The drive failed diagnostics for its internal CPU RAM.
8306 The CD-ROM ECC circuit has failed diagnostics.
8307 The drive's gate array has failed diagnostics.
8308 The drive's internal bus has failed diagnostics.
8309 The drive failed diagnostics for its drive mechanism.
8310 The drive's memory has failed diagnostics.
8311 The drive's program ROM has failed diagnostics.
8312 The drive's RAM has failed diagnostics.
8313 The drive failed diagnostics for its internal ROM.
8314 The drive's SCSI controller has failed diagnostics.
8315 The drive failed diagnostics for its internal SCSI interface.
8316 The drive's servo processor has failed diagnostics.
8317 The drive has failed a diagnostics check.
8318 There is no disc information on the disc.
8319 The disc information can not be read.
8320 The disc is not blank.
8321 Disc style mismatch. This disc can not be used to write audio.
8322 The drive isn't ready.
8323 Dummy blocks were written to fill the remainder of the track.
8324 EDC Error.
8325 An EEPROM failure occurred.
8326 EFM Encoder error.
8327 The EFM could not be detected.
8328 The elevator is not in position.
8329 Elevator position early.
8330 Elevator position late.
8331 The elevator is stuck.
8332 Enclosure failure.
8333 Enclosure services failure.
8334 Enclosure services not available.
8335 Enclosure services transfer error.
8336 Enclosure services transfer refused.
8337 The end of the disc was reached, 99 tracks have been written, or the OPC or PMA areas are full.
8338 The requested block is beyond the end of the current track.
8339 Warning, enclosure degraded.
8340 The erase command has failed.
8341 Error log overflow.
8342 An error occurred reading the ISRC on the disc.
8343 An error occurred reading the media catalog number.
8344 An error occurred reading the UPC on the disc.
8345 Error too long to correct.
8346 An error occurred reading the UPC or ISRC on the disc.
8347 The operation exceeded the last valid address on the disc.
8348 The drive failed to soft reset.
8349 Failure prediction threshold exceeded.
8350 Failure prediction threshold exceeded is false.
8351 Fixation failed.
8352 A session fixation error occurred writing the lead-in.
8353 A session fixation error occurred writing the lead-out.
8354 A session fixation error occurred due to an incomplete track.
8355 A session fixation error occurred due to a partial track.
8356 A focus servo failure occurred.
8357 The focus servo has failed.
8358 The format command failed.
8359 The PMA area is full. No further writes are allowed on this disc.
8360 The disc is hardware write protected.
8361 Header monitor error.
8362 Header search error.
8363 Head select fault.
8364 The host can't disconnect.
8365 Idle activated by command.
8366 Idle activated by timer.
8367 Illegal bar code format.
8368 Illegal bar code length.
8369 The selected block size is invalid for the current command.
8370 Illegal PQ entries or too many PQ entries.
8371 Illegal data form for reserve.
8372 An illegal function was called for this drive.
8373 This disc media is not supported.
8374 The data in the track is not compatible with the current command.
8375 Illegal reserve length.
8376 The requested track does not exist.
8377 An invalid track was specified in the CDB.
8378 The selected track mode is invalid.
8379 Illegal track status.
8380 An illegal transfer length was encountered.
8381 Import/Export element accessed.
8382 Improper scan velocity.
8383 The command is not appropriate during the current operation.
8384 The disc is not compatible.
8385 An initiator detected error message was received.
8386 Initiator detected error.
8387 An initiator detect error occurred.
8388 The input magazine is empty.
8389 The input magazine is not in the transporter.
8390 Inquiry data has changed.
8391 The drive controller detected an unknown internal error.
8392 An internal target failure occurred.
8393 An invalid B0 value was specified.
8394 Invalid bits in identify.
8395 Invalid bits were encountered in the identify message.
8396 An access was attempted beyond the end of the disc.
8397 Invalid block size.
8398 An invalid command code was encountered.
8399 The command is not supported by the drive.
8400 Invalid command code.
8401 Invalid command parameter list.
8402 Invalid element address.
8403 An option was selected in the CDB that is not supported by this drive.
8404 An option was selected in the parameter list that is not supported by this drive.
8405 A corrupted indentify message was received.
8406 Invalid ISRC.
8407 The LUN in the CDB was nonzero.
8408 An invalid message was received.
8409 An invalid message error occurred.
8410 Invalid packet size.
8411 An invalid parameter was sent to the device.
8412 Invalid release of reservation.
8413 The starting address issued by the command is invalid.
8414 Invalid track number.
8415 Invalid UPC.
8416 An I/O process was terminated.
8417 The laser in the optical pick-up has exhausted it's power.
8418 Last one block error.
8419 The disc is dirty or damaged; uncorrectable error L-EC.
8420 This media can not be written reliably at the current speed. Try alternate media or a lower write speed.
8421 A linear velocity measurement error occurred.
8422 A link area was encountered during the read.
8423 Link Block.
8424 Link blocks encountered.
8425 The loading or unloading of the disc caddy/tray has failed.
8426 The load mechanism failed.
8427 Log counter at maximum.
8428 Log exception.
8429 The logical unit is reserved.
8430 Log list codes exhausted.
8431 Logical parameters have changed.
8432 The system can not keep up with the audio data stream. Try writing/reading the data at a lower speed.
8433 Low power condition on.
8434 A SCSI LUN communication error occurred.
8435 LUN communication parity error.
8436 LUN communication time-out.
8437 LUN failed self-config.
8438 LUN failure.
8439 LUN has not self configured.
8440 The Logical Unit Number is reserved.
8441 LUN not responding to select.
8442 The specified LUN is not supported.
8443 The disc is software write protected.
8444 LUN timeout.
8445 The disc magazine has been inserted.
8446 The disc magazine is locked.
8447 The disc magazine is not accessible.
8448 The disc magazine has been removed.
8449 The disc magazine is unlocked.
8450 The unit has exceeded maximum internal temperature. Check the fan or filter.
8451 Media catalog number conflict.
8452 A mechanical positioning error has occurred.
8453 The loading mechanism failed.
8454 The media is locked.
8455 The disc may have changed.
8456 The disc is corrupted or of an unknown format.
8457 The medium destination element is full.
8458 There is no disc in the drive. The tray is closed.
8459 There is no disc in the drive. The tray is open.
8460 The medium source element is empty.
8461 The disc is of an unknown format.
8462 A message error occurred.
8463 Message-in phase time out.
8464 Message-out phase time out.
8465 The drive rejected a message.
8466 The micro-code has changed.
8467 An internal micro-controller register error has occurred.
8468 The write request is mixed data mode.
8469 Mode of last track error.
8470 A mode select parameter change occurred.
8471 Modulation error.
8472 Motor controller error.
8473 The drive did not mount correctly.
8474 Multiple peripherals selected.
8475 The drive is unable to read the ATIP or subcode of the current disc.
8476 No audio status is currently available.
8477 No bar code is present on the disc.
8478 No start pattern for bar code.
8479 There is no cartridge in the drive.
8480 This media can not be written reliably because it does not contain a character ID code.
8481 No cue sheet has been specified.
8482 There is no disc in the drive.
8483 No EFM signal is present.
8484 A non existent block was encountered.
8485 A reference position was not found.
8486 A seek error has occurred.
8487 No sense.
8488 No service response available.
8489 The data was not completely transferred.
8490 The track is not a data track.
8491 Not enough margin for bar code.
8492 There is not enough space available on the disc.
8493 There is no table of contents on the disc. It may be blank.
8494 There is no track to complete.
8495 There are no tracks to finalize.
8496 The drive is not ready, a format is in progress.
8497 The drive is not ready, please check the drive.
8498 The drive is not ready and needs initialization.
8499 The drive is not ready, an operation is in progress.
8500 The drive is not ready for an unknown reason.
8501 The drive is not ready, a write is in progress.
8502 The disc is not recordable.
8503 An OPC execution error occurred.
8504 An OPC execution command has timed out.
8505 An OPC initialize error occurred.
8506 The open button on the drive has been pressed.
8507 The eject button has been pressed.
8508 An operator request has occurred.
8509 Operator selected copy permit.
8510 Operator selected copy protect.
8511 The output magazine is full.
8512 The output magazine is not in the transporter.
8513 The output magazine is not empty.
8514 An overlapped command was attempted.
8515 A packet is too big to fit in the remaining space on the drive.
8516 Padding blocks were written to fill the remainder of the track.
8517 The parameter list length is incorrect.
8518 The specified parameter list was too large.
8519 The command specified an illegal length for the parameter list.
8520 A specified parameter is not supported.
8521 Parameters have changed.
8522 A parameter value is invalid.
8523 The Power Calibration Area is nearly full. It is recommended the disc be fixated after this track is written.
8524 A Power Calibration Area error has occurred.
8525 The PCA is full. The disc is not blank.
8526 The Power Calibration Area is full. No further writes are allowed on this disc.
8527 Permanent write protect.
8528 Persistent write protect.
8529 PLL no lock.
8530 The plunger is not home.
8531 The plunger is not in position.
8532 Plunger position early.
8533 Plunger position late.
8534 The plunger is stuck.
8535 The PMA is almost full.
8536 The PMA is empty, the disc is blank.
8537 The drive is unable to read the PMA of the current disc.
8538 Failure to update the PMA.
8539 The PMA could not be updated.
8540 An error in positioning has occurred.
8541 Positioning error detected by read.
8542 The power calibration failed, possibly due to an incorrect write once disc.
8543 Power calibration range error.
8544 A power on reset has occurred.
8545 The drive power-on self test has failed.
8546 Power range error.
8547 The test write has completed.
8548 The previous fixation failed.
8549 The previous PMA update failed.
8550 The command failed because the program area is empty.
8551 The program area already contains tracks.
8552 A radial skating error occurred.
8553 An internal RAM error has occurred.
8554 A random positioning error has occurred.
8555 The read address is in the ATIP area. The disc is probably blank.
8556 Read link run-in run-out.
8557 A read has been recovered.
8558 Read recovered, data auto-reallocated.
8559 Read recovered reassign.
8560 Read recovered rewrite.
8561 Read recovered using previous sector ID.
8562 The read command required ECC correction for data recovery.
8563 Read recovered with ECC and retries.
8564 The read command required ECC correction for data recovery.
8565 Read recovered without negative head offset.
8566 Read recovered without error correction.
8567 Read recovered without ECC data rewritten.
8568 Read recovered without ECC re-assign.
8569 Read recovered without ECC re-write.
8570 Read recovered without positive head offset.
8571 The read command required multiple retries.
8572 The read request was in the lead-in.
8573 The read request was in the lead-out.
8574 Read retries have been exhausted. Check the disc to make sure it isn't dirty or damaged.
8575 A read time-out occurred.
8576 The command required CIRC correction for data recovery.
8577 The command required L-EC correction for data recovery.
8578 Recovery has failed.
8579 Recovery is needed.
8580 An internal register error has occurred.
8581 The disc can not be removed at this time.
8582 The request for fixation failed due to reserved tracks that are still blank.
8583 Reservation pre-empted.
8584 The track is reserved.
8585 A reserved track is present on this disc.
8586 Reserve track check error.
8587 A power-on reset or bus-reset has occurred.
8588 Rounded parameter.
8589 Saving parameters is not supported.
8590 A SCSI bus read error has occurred.
8591 The drive has detected a SCSI parity error.
8592 An internal SCSI register error has occurred.
8593 A SCSI select failure occurred.
8594 A seek operation did not complete.
8595 A seek failure occurred. Make sure the disc isn't dirty or damaged.
8596 A seek failure occurred (header). Make sure the disc isn't dirty or damaged.
8597 A seek failure occurred (servo). Make sure the disc isn't dirty or damaged.
8598 A seek failure occurred (sync). Make sure the disc isn't dirty or damaged.
8599 A seek failure occurred (target not met). Make sure the disc isn't dirty or damaged.
8600 A select/reselect error occurred.
8601 The drive failed self-test.
8602 A tracking or focus adjustment error has occurred.
8603 Servo IC error.
8604 A servo is off track.
8605 A servo tracking error was encountered.
8606 A session fixation error occurred.
8607 Session not fixated for append.
8608 A sledge servo failure occurred.
8609 A slider velocity control error occurred.
8610 A spindle servo failure occurred.
8611 Stand-by activated by command.
8612 Stand-by activated by timer.
8613 Status phase time out.
8614 Data transfer was terminated because a non-data block was encountered.
8615 The disc is dirty or damaged; subcode ECC error.
8616 The drive is unable to read the subcode of the current disc.
8617 Synchronous data transfer error.
8618 Syscon communication error.
8619 An EEPROM error occurred.
8620 Syscon not ready.
8621 Syscon RAM error.
8622 Syscon ROM error.
8623 Tagged overlapped command.
8624 Track at once isn't in the PMA.
8625 Target operating conditions have changed.
8626 The drive's thermal sensor has failed.
8627 Threshold condition met.
8628 Threshold parameters not supported.
8629 The drive is unable to read the TOC, PMA, subcode, or ATIP of the current disc.
8630 A problem was encountered during radial tracking.
8631 A tracking servo failure occurred.
8632 The track mode has changed.
8633 The tray is open.
8634 Unable to recover damaged disc.
8635 The drive was not able to spin up.
8636 Unknown syscon error.
8637 The disc is unrecoverable due to a damaged track.
8638 The disc is unrecoverable due to a damaged track descriptor.
8639 An unrecovered read error occurred, most likely due to a flaw in the disc.
8640 An unrecovered CIRC read error occurred, most likely due to a flaw in the disc.
8641 An unrecovered L-EC read error occurred, most likely due to a flaw in the disc.
8642 The disc is an unsupported disc type. Reliable writing can't be completed.
8643 Unsupported closure function.
8644 An unwritten area of the disc was encountered.
8645 Verify blank error.
8646 Verify error at end of lead-in.
8647 Verify error at end of lead-out.
8648 Verify error at end of track.
8649 Verify error at start of lead-in.
8650 Verify error at start of lead-out.
8651 Verify error at start of track.
8652 A verify operation has failed.
8653 Voltage fault.
8654 Warning, temperature has been exceeded.
8655 An unknown warning has occurred.
8656 The write address is in the EFM area. The disc is not blank.
8657 An append by a write command failed.
8658 Attempt to write audio on a reserved track.
8659 The write has completed.
8660 The write was terminated due to a write emergency. This is most likely a hardware error.
8661 A write error occurred. Make sure your media is approved for this drive.
8662 Write Error; padding blocks were written to fill the remainder of the track.
8663 Write error; recovery is needed.
8664 A write time-out error occurred.
8665 The RED level decoder detected an uncorrectable error in the recorded data.
8666 The drive is not accepting commands due to a write in progress.
8667 The drive is writing the lead-in with Disc at Once mode.
