20 Copies the selected disc or audio files to the Clipboard. To record them in the new location, use the HyCD Paste command.
21 HyCD &Paste
22 Record the items you have HyCD Copied to the selected location.
23 SAVE AS FILE DIALOG
24 Format - CD-R (J:)
25 Unable to access the CD drive. Possible causes are:\n 1. There is no CD in the drive.\n 2. The drive is not connected properly.\n 3. The device driver not installed properly, or you are using an outdated driver.\n 4. The drive is not ready, or it has outdated firmware.\n\nHints:\n 1. Place a CD into the drive.\n 2. Check the connections and make sure the CD drive is connected properly.\n 3. Make sure you have installed the latest version of the (SCSI) driver for your controller card.\n 4. Update the firmware of your CD drive.\n\n
26 The CD that you are trying to write to is already write protected. No more information can be added.\n\nHint:\n 1. Please use a new CD.\n 2. HyCD Publisher will use information on this CD to complete CD organizing layout process.\n
27 This operation is not supported by the CD Reader.\n\nHint:\n 1. Retry this operation.\n 2. Reset the CD Reader by ejecting the tray and reloading it.\n 3. Try another CD media. This one may be damaged.\n 4. Use the CD Recorder as a reader to perform the read operation.\n
28 Buffer Underrun.\n Your computer is not able to get data to the CD\n recorder at a rate fast enough to record the CD.\n\nHints:\n 1. Do not start or run any other applications during a recording session.\n 2. Please refer to the help section for more information on how to avoid data under-run\n\n
29 Not enough free space on the CD to perform this task.\n\nHint:\n 1. Close tray (or insert caddy), wait until CD is ready,\n then retry this operation.\n 2. Please use a new CD.
30 The file you are recording is not a standard CD-ROM image. The file is \nnot a multiple of 2K.\nHint:\n\n Use CDR Products to create the CD-ROM file for recording.\n
31 The CD-ROM file is not a complete CD-ROM image. The file contains references \nthat are out side of the image. If you record it, you will get a bad CD.\n\nHint:\n 1. Use CDR Products to create the CD-ROM file for recording.\n 2. Make sure the file that you have created contains the entire CD-ROM image.
32 The reader/recorder has reported an error:\n Unable to get system drive information.\n\nHints:\n 1. Retry this operation\n 2. Reboot your system.\n\n
33 The reader/recorder has reported an error:\n Unable to read data.\n\nHints:\n\n 1. Reduce reading speed. \n 2. Retry this operation.\n 3. Reset the CD Reader/Recorder by ejecting the tray and reloading it.\n 4. Try another CD media. This one may be damaged.\n 5. Use the CD Recorder as a reader to perform the read operation.\n\nOther Hints:\n 1. Check the connections and make sure the CD Recorder is connected\n properly.\n 2. Make sure you have installed the latest version of the (SCSI) driver\n for your controller card.\n 3. Update the firmware of your CD-ROM recorder.\n 4. Place a CD into the recorder.\n\n
34 The reader/recorder has reported an error:\n Unable to set attribute.\n\nHints:\n\n 1. Retry this operation.\n 2. Reset the CD Reader/Recorder by ejecting the tray and reloading it.\n 3. Try another CD media. This one may be damaged.\n 4. Try using the CD Recorder as a reader to perform the read operation.\n\nOther Hints:\n 1. Check the connections and make sure the CD Recorder is connected\n properly.\n 2. Make sure you have installed the latest version of the (SCSI) driver\n for your controller card.\n 3. Update the firmware of your CD-ROM recorder.\n 4. Place a CD into the recorder.\n
35 The reader/recorder has reported an error:\n CD is not a recordable CD.\n\nHint:\n\n 1. Retry this operation.\n 2. Reset the CD Reader/Recorder by ejecting the tray and reloading it.\n 3. Try another CD media. This one may be damaged.\n 4. Use the CD Recorder as a reader to perform the read operation.\n\nOther Hints:\n 1. Check the connections and make sure the CD Recorder is connected\n properly.\n 2. Make sure you have installed the latest version of the (SCSI) driver\n for your controller card.\n 3. Update the firmware of your CD-ROM recorder.\n 4. Place a CD into the recorder.
36 Unable to access the Hard Disk Drive; possible cause:\n 1. The hard drive is not connected properly.\n 2. There is no floppy in the floppy drive or no CD in the reader.\n 3. Device drivers are not installed properly or are using an outdated driver.\n\nHints:\n\n 1. Check the connections and make sure the Hard Disk is connected properly.\n 2. Make sure you have installed the latest version of the (SCSI) driver for your controller card.\n
37 There is not enough information to write to the CD. Each recording requires\ndata larger than 600KB.\n\nHint:\n\n Add more files to be recorded.\n
38 Selected files were modified during CD-ROM recording.\n\nPlease retry the record operation or de-select the changing files.\n
39 An error has occurred in the HyCD Engine. Possible causes:\n 1. You have run out of Virtual Memory.\n 2. You have run out of Hard Disk space.\n\nHint:\n\n 1. Quit other applications.\n 2. Quit and re-run this application.\n 3. Increase Virtual Memory.\n 4. Reboot the system.\n\n
40 An error has occurred reading the content of the CD:\n Unable to recognize CD-ROM format from previous session.\n\nHint:\n\n 1. Use a CD that was created by CDR products.\n 2. Use a blank CD.\n
41 Previous session contains only an Apple HFS file system.\nNew session will be set to a session independent from previous sessions.\n
42 Single session recording requires a new blank CD.\nPlease insert a new CD into the recorder.\n
43 HyCD has just finished copying your data onto the disc, but it\nencountered an error while write-protecting the CD.\n\nHints:\n 1. Check the connections and make sure the CD Recorder\n is connected properly.\n 2. Make sure you have installed the latest version of\n the (SCSI) driver for your controller card.\n 3. Update the firmware of your CD-ROM recorder.\n 4. Use a blank disc that is compatible with your recorder.\n For example, use 8x certified media with an 8x recorder, or\n use 4x certified media with a 4x recorder.\n 5. If you are using a SCSI recorder\n ENABLE the SCSI Connect and Disconnect and Sync\n features of the SCSI controller card.\n\n
44 Unable to get device type.\nPlease check hardware configuration.\n
45 You are trying to format a read-write CD, but there is no read-write drive attached to the system.\n\n
46 The CD in the recorder is not a Rewritable CD.\n\n Hint: \n You can not record onto a replicated CD (Silver Color). Insert a \"CD-RW\" disc and try again.\n\n
47 Failed to format disc. Retry this operation.\n\n
48 Although the CD Reader you are using is able to play back Audio\nCDs, it may not have the Audio extraction capability.\nHint: \n Please use the list of HyCD Engine supported CD Readers to\nperform audio extraction.\n
49 Hard Disk type not setting correctly.\n Hint:\n Please check hardware configuration, switch virtual disk type.\n
50 Failed to open file.\n\n
51 No space left on device; CD-ROM image removed.\n
52 I/O incomplete.\n Hint:\n\n Possible cause by no enough space in device.\n
53 Fail to initialize device.
54 Hardware error: unrecoverable hardware error.\nHint:\n\n 1. Make sure SCSI device is installed.\n
55 Succeed.
56 Error occured during reading or writing process. possible causes:\n The CD in the recorder has been removed.\n
57 Hardware error: end of medium.\n
58 Hardware error: end of medium.\n
59 Hardware error: unknown SCSI error.\n
60 I/O complete.\n
61 Operation System reported a error.\n
62 Application setting not correct.\n Please check configuration.\n
67 This version of the HyCD software is not registered.\nPlease fax at (408) 252-7748 or e-mail to support@HyCD.com for assistance.\n
68 During orgnizing file structure HyCD Engine \n detect an error in file.\n
69 Validation failed.
70 SCSI MUX error:
71 Failed to access to intermediate file.
72 Environment variable <CDRENGHOME> not found\n, Please set variable or run \'source cdrenv\' first.\n
73 Usage:
74 UNKNOWN ERROR, Please contact HyCD Inc..\n
75 Process canceled by user.
76 The reader/recorder has reported an error:\n Unable to read enhance data.\n\nHints:\n\n 1. Reduce reading speed. \n 2. Retry this operation.\n 3. Reset the CD Reader/Recorder by ejecting the tray and reloading it.\n 4. Try another CD media. This one may be damaged.\n 5. Use the CD Recorder as a reader to perform the read operation.\n\nOther Hints:\n 1. Check the connections and make sure the CD Recorder is connected\n properly.\n 2. Make sure you have installed the latest version of the (SCSI) driver\n for your controller card.\n 3. Update the firmware of your CD-ROM recorder.\n 4. Place a CD into the recorder.\n\n
77 Unable to access the CD reader. Possible causes are:\n 1. There is no CD in the reader.\n 2. The reader is not connected properly.\n 3. The device driver not installed properly, or you are using an outdated driver.\n 4. The reader is not ready, or it has outdated firmware.\n\nHints:\n 1. Place a CD into the reader.\n 2. Check the connections and make sure the CD reader is connected properly.\n 3. Make sure you have installed the latest version of the (SCSI) driver for your controller card.\n 4. Update the firmware of your CD reader.\n\n
78 Unable to access the CD recorder. Possible causes are:\n 1. There is no CD in the recorder.\n 2. The recorder is not connected properly.\n 3. The device driver not installed properly, or you are using an outdated driver.\n 4. The recorder is not ready, or it has outdated firmware.\n\nHints:\n 1. Place a CD into the recorder.\n 2. Check the connections and make sure the CD recorder is connected properly.\n 3. Make sure you have installed the latest version of the (SCSI) driver for your controller card.\n 4. Update the firmware of your CD recorder.\n\n
101 About HyCD Data...
175 HyCD &Print
176 HyCD label printing.
177 Out of Memory.
178 Can not copy audio tracks to a data CD.
179 Can not make a CD to CD copy.\n Please check source and destination disc.\n
180 Not enough space on the hard disk.\n
181 Available space:
182 Space required:
183 Please put a blank CD into recorder.\n
184 Not enough space on the CD, or the CD is write-protected.\n
185 Can not invoke
186 HyCD icon in the System Tray is not running. Would you like to run it?\n
187 Your evaluation license has expired. \nPlease visit WWW.HyCD.com to purchase the software \nor enter the Registration Code in 'Preferences' dialog, \naccessible from the HyCD icon on the System Tray. \n
189 drive is in use by another program!
190 The CD you are creating contains multiple sessions and may not be playable on your home stereo. \nWould you like to continue?\n
191 You can not record audio tracks to a data CD.\n
192 Scan Failed! Please reboot the system before any recording.\n
193 Please import mp3 or wave files.
194 Please import cda files from source CD.
195 The Track List (.tk2) file is corrupted or the source file does not exist. \n
196 Remove all songs
197 Import songs
198 Save the song list
199 Cut songs
200 Copy the selected songs
201 Paste songs
202 Print the song list
203 Help information
204 Move selected songs up
205 Move selected songs down
206 Play the selected song
207 Record audio files
208 Supported
209 Not Support
210 Save Track;
211 Real Write;
212 Test && Real Write;
213 Test Write;
214 Time Remaining:
215 Track
216 Closing session. Please Wait...
217 Scanning disc in drive
218 Please wait...
219 drive has not enough free space for temporary wave files
220 Blank CD
221 Audio CD
222 Data CD
223 Mixed CD
224 Undefined CD
225 Version
226 HyCD General
227 HyCD Drive
228 HyCD Options
229 Can not invoke Blade's MP3 Encoder.
230 Can not invoke Xing MP3 Encoder.
231 Can not invoke HyCD Encoder.
232 We have detected a source CD with both Data and Music tracks.\nWe recommend:\n\n1. Use the CD Recorder\n to Copy and Paste the CD to Hard Disk then\n Copy and Paste back to CD Recorder.\n\n2. Use the CD Reader to perform CD to CD copy.\n You may need to reduce the reader speed to 8X\n for more accurate reading.\n\nDepending on the quality of your source CD and CD Recorder firmware,\n the duplicated CD may not operate properly after copy.\n\nDo you want to continue?
233 Can not invoke L3Encoder.
234 HyCD Tray is not running. Would you like to run it?
235 The CD you creating may not be played on home stereo.\n Because it aleady has some sessions.\n Would you like to continue?
236 Scan Failed! Please reboot the system before any recording.
237 Not supported operation.
238 Song Name
239 Track #
240 Path
241 Time
242 Size
243 Type
244 Drag and Drop to add more songs; Drag and Drop to rearrange playback order; Right click for more options
245 Record audio files
246 Help information
247 Close Customize Play List Window
248 &Play
249 &Import
250 Cu&t
251 &Copy
252 &Paste
253 Clea&r
254 Move &Up
255 Move &Down
256 &Help
257 Drive Pr&operties
258 Disabled
259 Your current version of HyCD Play&Record has no CD recording capablity. \nPlease visit www.HyCD.com and upgrade to professional version.
260 HyCD Play&Record
261 Customize Play List
262 Cancel
263 Copy in progress, please wait...
264 We have detected a source with both Data and Music tracks.\nDepending on the quality of your source and CD Recorder firmware,\n the created CD may not operate properly after copy.\n\nDo you want to continue?
265 Scanning disc in drive
266 Please wait...
267 Can not get
268 file information.
269 Real Write
270 Test Write
271 Test & Write
272 Test && Write
273 CD-ROM Drive
274 CD-R Drive
275 CD-RW Drive
276 Can not copy the CD with data and music tracks. \nThe CD ROM is not MMC compatible.
277 Your HyCD Play&Record license does not have MP3 file copying feature.
278 Over 100 song limit.
279 You do not have the license for HyCD Data Feature.
280 Drag and drop items from source tree or windows explorer to destination tree. Right mouse button click in destination tree for more options.
57344 HyCD Data
57345 The application is for Windows NT/2000 platform.
57346 The application is for Windows 95/98 platform.
57347 Unable to run HyCD Play&Record.
57348 You need install HyCD Play&Record before using HyCD Data.
57349 The path does not exist!
57350 All changes made in destination tree will lost. \nDo you really want to exit?
57351 Please put a blank CD into recorder.
57352 Fail to copy temporary image file to CD.
57353 Fail to create temporary image file.
57354 Unable to eject media!
57355 Not enough space on the CD.
57356 This item already exists.
57357 Error creating writer.
57358 This command is not supported yet.
57359 Error reading session.
57360 Warning: Cannot add HFS files -- device is too full "\n "for HFS already\n
57361 Warning: Cannot include rr without iso - ignoring rr
57362 Failed to open device!
57363 No files to put in image.\n
57364 Failed to lock device.\n
57365 Writing of session failed!
57366 fails to set attribute.
57367 Failed to reinitialize device.\n
57368 Failed to unlock device.\n
57369 Failed to refresh device.\n
57370 Audio tracks defined, can't add image file
57371 Failed to open %1 for reading/writing!\n
57372 The path [ %1] does not exist and cannot be added to\n
57373 The path [ %1 ] is not a directory and cannot be added to\n
57374 The path [ %1 ] already exists in the image tree\n
