home *** CD-ROM | disk | FTP | other *** search
- M29PAD for MiG-29 version 1.0
-
- By: Ken "Stinger" Richardson
- UID: [70761,301]
-
- M29PAD is a terminate and stay resident program that will add small
- indicator lights to MiG-29's Padlock and "Scrolled up" views. These lights
- indicate Afterburners, AirBrake, Radar, and ECM. Each indicator has it's own
- color for easy identification.
-
- No modification is required to the MiG-29 program. Simply run the M29PAD
- program, or use LOADHIGH to load it into high memory. After M29PAD is loaded
- it will automatically check to see if MiG-29 is running. If MiG-29 is running
- it will automatically "attach" itself. If MiG-29 is not running, it will
- simply lay dormant in memory until it senses MiG-29. To Uninstall M29PAD,
- just execute the M29PAD.COM program a second time. This will remove the TSR
- from memory.
-
- M29PAD also has a feature that will allow you to remap your COM3 and COM4
- ports to COM1 and COM2 respectively. This will allow people to connect with
- MiG-29, in one of the communications modes, using COM3 or COM4. To enable the
- COM port remap feature, add the /3 or /4 switch after typing M29PAD. For
- example: Type M29PAD /3 to remap COM3 to COM1
- or M29PAD /4 to remap COM4 to COM2
-
- The M29PAD program uses roughly 900 bytes of memory and can be loaded HIGH
- with the LOADHIGH command, therefore saving precious conventional memory.
-
- This utility is not supported by Spectrum Holobyte in any way so if
- you experience any problems contact me via Compuserve EMail or the MODEMGAMES
- forum on Compuserve (GO MODEMGAMES).
-
- -Enjoy!
-
- Stinger
-
- File list:
- M29PAD.COM - Padlock TSR itself. This file must be loaded before
- running MiG-29.
- M29PAD.TXT - This file.
-
- README.NOW - A text file for your reading enjoyment
-