home *** CD-ROM | disk | FTP | other *** search
- @CLS
- rem *When FS4 starts you will be in the Normal Flight Mode with
- rem the TSR active [you do plan to fly don't you? 8-)]. To turn
- rem the TSR off while in FS4 at any time, press F12 on the keyboard.
- rem To turn it back on again, press F12 again or simply move the
- rem rocker switch on the WCS II handle to any position. The TSR
- rem will reactivate in whatever mode you have moved the rocker to.
- rem There really is no reason to ever manually turn the TSR off, you
- rem will lose the 8-way viewing if you do. ***
- Pause
- @CLS
- rem *Remember there are THREE MODES with the TSR active. Rocker up
- rem is Comms/Nav mode, Rocker down is Landing/Takeoff mode, Rocker
- rem middle is Normal Flight. Refer to READFS4A.TXT to see what
- rem options are available in each mode.***
- pause
- @CLS
- rem *The FS4 Remap TSR will now load and then FS4 will start.
- rem If you are ready, kneepad, portable GPS unit, survival vest,
- rem maps, parachute, pizza and beer (FOR AFTER THE FLIGHT ONLY!),
- rem fly rod, flies, kreel, waders, backpack, relief bottle, IFR
- rem charts, Approach plates, grease-pencil, IFR Folding Plotter,
- rem Flight Plan, Weather Report, E6-B Flight Computer,
- rem prayer book... ***
- Pause
- @CLS
- rem *Make sure the WCS II handle is in the FULL OFF (handle all the
- rem way back) position before proceeding!*****
- rem
- rem *AFTER YOU ENTER FS4, click button 1 on the WCS II handle until
- rem the views start cycling and return to the cockpit, THEN, hit
- rem the "k" key on the keyboard to calibrate your joystick. Then
- rem flick the Rocker switch on the WCS II handle to the down
- rem position and you will be in the Landing/Takeoff mode of
- rem the remap. Ready to fly.***
- rem *Please place the RED MODE SWITCH on the base of the WCS II
- rem in the ANALOG position now........
- pause
- @CLS
- rem CLICK BUTTON 1 ON THE WCS II HANDLE at the pause message!
- rem Happy flying, Buzz Hoffman, Chief Test Pilot, ThrustMaster, Inc.
- pause
- @CLS
- @CD:\REMAP
- kbdrmp.com
- @C:\REMAP\tbl_fll Fltsim4A.RMP
- @CD\Fltsim4
- @FS4
- @kbdrmp.com
-