Geek Gadgets 1/ADE-1.bin/ade-dist/unixtex-6.1b-bin0.lha/lib/texmf/tex/latex2e/base/latexbug.tex

Text File | 1996-10-12 | 20KB | 742 lines

% \iffalse meta-comment
%
% Copyright 1994 the LaTeX3 project and the individual authors.
% All rights reserved. For further copyright information see the file
% legal.txt, and any other copyright indicated in this file.
%
% This file is part of the LaTeX2e system.
% ----------------------------------------
%
%  This system is distributed in the hope that it will be useful,
%  but WITHOUT ANY WARRANTY; without even the implied warranty of
%  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
%
%
% IMPORTANT NOTICE:
%
% For error reports in case of UNCHANGED versions see bugs.txt.
%
% Please do not request updates from us directly.  Distribution is
% done through Mail-Servers and TeX organizations.
%
% You are not allowed to change this file.
%
% You are allowed to distribute this file under the condition that
% it is distributed together with all files mentioned in manifest.txt.
%
% If you receive only some of these files from someone, complain!
%
% You are NOT ALLOWED to distribute this file alone.  You are NOT
% ALLOWED to take money for the distribution or use of either this
% file or a changed version, except for a nominal charge for copying
% etc.
% \fi
%%% ====================================================================
%%%  @LaTeX-file{
%%%     author          = "David Carlisle",
%%%     version         = "1.18",
%%%     date            = "05 December 1994",
%%%     filename        = "latexbug.tex",
%%%     email           = "[e-mail]",
%%%     codetable       = "ISO/ASCII",
%%%     keywords        = "LaTeX, bugs, reporting",
%%%     supported       = "yes",
%%%     docstring       = "
%%%
%%%     LaTeX bug report generator.
%%%     %%%%%%%%%%%%%%%%%%%%%%%%%%
%%%
%%%     Processing this file with LaTeX should produce
%%%     a file latexbug.msg in the current directory.
%%%
%%%     latexbug.msg may be used as a template for submitting bug
%%%     reports concerning files in the standard LaTeX distribution.
%%%
%%%     Any bug report should include a small LaTeX test file
%%%     that shows the bug, and the log that LaTeX produces on the
%%%     test file.
%%%
%%%     Please check before submitting a bug report that your format
%%%     is not more than one year old. New LaTeX releases occur at
%%%     6 monthly intervals, and so your bug may be fixed in a later
%%%     release.
%%%
%%%     Completed bug report forms should be submitted to:
%%%     [e-mail]
%%%
%%%     Please:
%%%     use the synopsis text as the `Subject' line of the message.
%%%     ===========================================================
%%%
%%%     For example:
%%%     Subject: \verb does not work inside \caption
%%%
%%%     So that your message has an identifying subject.
%%%     Do not use subject lines such as `LaTeX bug' as this does not
%%%     help us to identify your message.
%%%
%%%
%%%     Configuring latexbug
%%%     ====================
%%%     If you often test early release of LaTeX packages, and feel that
%%%     you may need to use this program often, you may create a file
%%%     latexbug.cfg
%%%     This should contains the answers of certain standard questions.
%%%     (Such as your name and email address.)
%%%
%%%     Currently the responses that may be stored in latexbug.cfg are:
%%%     name address organisation and interactive.
%%%     (If organisation is not set in the .cfg file latexbug does not
%%%     prompt for it, as this is not vital information.)
%%%
%%%     For example, my personal latexbug.cfg looks like
%%%
%%%     \def\name{David Carlisle}
%%%     \def\address{[e-mail]}
%%%     \def\organisation{Manchester University}
%%%     \def\interactive{y}
%%%
%%%     A site latexbug.cfg might just set the \organisation, leaving
%%%     the personal details to be filled in interactively by the user.
%%%
%%%  }
%%% ====================================================================

\ifcat{=

\catcode`\{=1 \let\bgroup{
\catcode`\}=2 \let\egroup}
\catcode`\#=6
\catcode`\^=7
\catcode`\@=11

\newlinechar`\^^J
\def\m@ne{-1 }
\countdef\count@255

\def\fmtname{INITEX}
\def\fmtversion{9999/00/00}
\def\@secondoftwo#1#2{#2}
\def\@empty{}
\everyjob{\typeout{INITEX}}
\def\space{ }
\def\@spaces{\space\space\space\space}
\let\@@end\end
\let\loop\relax
\expandafter\let\csname repeat\expandafter\endcsname
                \csname fi\endcsname

\chardef\msg15
\immediate\openout\msg=\jobname.msg

\expandafter\edef\csname newif\endcsname#1#2{%
  \let\noexpand\ifinteractive
    \expandafter\noexpand\csname iffalse\endcsname}

\def\newcount#1{}

\def\dospecials{\catcode`\\=12 }

\def\typeout{\immediate\write17}

\def\two@digits#1{\ifnum#1<10 0\fi\number#1}

\def\wmsg#1#{\bgroup\@wmsg}

\def\@ifundefined#1#2#3%
  {\expandafter\ifx\csname#1\endcsname\relax#2\else#3\fi}
\else
%%
%% @ is a letter
%%
\catcode`\@=11

%%
%% Output stream to produce the bug report template.
%%
\newwrite\msg
\immediate\openout\msg=\jobname.msg


%%
%% Check that LaTeX2e is being used.
%%
\ifx\undefined\newcommand
 \newlinechar`\^^J%
 \immediate\write17{^^J%
    You must use LaTeX2e to generate the bug report!^^J^^J%
    If there is a bug in the installation procedure,^^J%
    and you can not create LaTeX2e, you may use initex^^J%
    to generate the report}%

 \let\relax\end
\else
\def\@tempa{LaTeX2e}\ifx\@tempa\fmtname\else
 \immediate\write17{^^J%
  Older Versions of LaTeX are no longer supported.^^J%
  You must use LaTeX2e to generate the bug report!^^J^^J%
  If there is a bug in the installation procedure,^^J%
  and you can not create LaTeX2e, you may use initex^^J%
  to generate the report}%
 \let\relax\@@end
\fi\fi

%%
%% \wmsg writes to the terminal, and the .msg file
%% \wmsg* just writes to the .msg file
%% \typeout just writes to the terminal
%%

\def\wmsg{\bgroup\@ifstar{\interactivefalse\@wmsg}\@wmsg}

\fi

\relax
\endlinechar=-1

\def\@wmsg#1{%
  \ifinteractive\immediate\write17{#1}\fi
  \immediate\write\msg{#1}%
  \egroup}

%%
%% if \interactivefalse just make a blank template.
%%
\newif\ifinteractive
\interactivetrue

%%
%% Prompt for an answer from the user, if the answer is not
%% provided by the cfg file.
%%

\def\readifnotknown#1{%
 \@ifundefined{#1}%
    {{\message{#1> }%
     \catcode`\^^I=12 \let\do\@makeother\dospecials
     \global\read\m@ne t\expandafter o\csname#1\endcsname}}%
    {\message{\csname#1\endcsname}}}

%%
%% Pause so messages do not scroll off screen.
%%
\def\pause{%
  \ifinteractive
    \message{Press <return> key to continue. }%
    \read\m@ne to \@tempa
  \fi}

%%
%% Opening Banner.
%%
\typeout{^^J%
============================================================^^J%
^^J%
LaTeX bug report generator^^J%
==========================^^J%
Processing this file with LaTeX will produce a template \jobname.msg^^J%
for submitting bug reports for the LaTeX distribution.^^J%
Please do not report bugs in other, non-standard, files to the^^J%
latex-bugs address.^^J}


\ifinteractive
  \InputIfFileExists{latexbug.cfg}{\typeout{** latexbug.cfg used **}}{}
\fi

%% \batch is a `private' macro used to get a batchmode
%% (actually \nonstopmode) run for use with latexbug.el
\ifx\batch\undefined

\count@=0
\ifinteractive

\typeout{%
Several categories of files are supported,^^J%
corresponding to directories in the standard LaTeX distribution:^^J^^J
0) LaTeX:\@spaces
         The `base' format, and standard  classes such as `article'.^^J
1) tools:\@spaces
         Packages supported by the LaTeX3 project team.^^J
2) graphics:\space
         The color and graphics packages.^^J
3) mfnfss: \space\space
         Packages for using MetaFont fonts with NFSS (ie LaTeX2e).^^J
4) psnfss: \space\space
         Packages for using PostScript fonts with NFSS (ie LaTeX2e).^^J
5) amslatex:\space
         Classes and Packages supported by the AMS.^^J
6) babel:\@spaces
         Packages supporting many different languages.^^J%
}
\message{Please select a category 0--6:  }
\read\m@ne to \answer
\count@=\answer\relax
\else
\typeout{As you are using INITEX, I will assume category `latex'}
\fi

\ifcase\count@
\def\category{latex}\or
\def\category{tools}\or
\def\category{graphics}\or
\def\category{mfnfss}\or
\def\category{psnfss}\or
\def\category{amslatex}\or

\def\category{babel}\else
\errhelp{Quit with `x' and then re-start latexbug}
\def\badcategory{Only categories 0,...,6 are supported at this time}
\errmessage{\badcategory}
\fi


\typeout{^^J%
============================================================^^J%
^^J%
Please give a one line ( < 50 character ) description of the problem.%
^^J^^J%
If you are using email to report the problem,^^J%
please also use this text as the `Subject' line for the mail message:%
^^J \@spaces\@spaces\space
                 |<------------------------------------------------>|}


\loop
\let\synopsis\relax
\readifnotknown{synopsis}
\ifx\synopsis\@empty
\repeat


\typeout{%
^^J%
\ifinteractive
This report generator may be used in one of two ways.^^J%
If you choose the interactive option, you will be prompted to answer^^J%
several questions. Otherwise a blank template will be created for^^J%
you to fill
 in using your editor.^^J%
\else
INITEX should only be used for reporting bugs with the LaTeX2e^^J%
installation procedure. If you have a working copy of LaTeX2e,^^J%
please use that to generate the report.
\fi}

\ifinteractive
\typeout{Interactive session (y/n) ? }
\readifnotknown{interactive}

\ifx\interactive\@empty
   \def\interactive{n}
\fi

%%
%% Allow anything begining with `y' or `Y' for yes.
%%
\edef\interactive{\uccode`\expandafter\@car\interactive\@nil}
\ifnum \interactive=`Y \else\interactivefalse\fi
\else
\def\interactive{`\N}
\fi

\else
\def\category{< CATEGORY >}
\def\synopsis{< SYNOPSIS >}
\batchmode
\interactivefalse
\def\interactive{`\N}
\fi

%%
%% Header in the msg file.
%%
\wmsg*{^^J%
 LaTeX2e bug report.^^J%
\ifnum \interactive=`Y Generated \else Template generated \fi
 by latexbug.tex on \number\year/\two@digits\month/\two@digits\day^^J%
^^J%
 Reports may be submitted by email to [e-mail]^^J%
 Please use the subject line:^^J%
 Subject: \synopsis^^J%
 ============================================================^^J}



%%
%% Category of bug, obtained earlier but put out now, after the header.
%%
\wmsg{>Category: \category}

%%
%% synopsis of bug, obtained earlier but put out now, after the header.
%%
\wmsg{>Synopsis: \synopsis}


%%
%% >Confidential: Default to no unless this is overridden
%% in latexbug.cfg. If you want to send a one-off confidential
%% report, just edit the latexbug.msg to say yes.
%%
\wmsg{>Confidential: \ifx\confidential\undefined
                         no
                       \else
                         \confidential
                       \fi}


\begingroup
 \global\let\format\@empty
 \gdef\hyphenation{standard}
 \def\immediate#1#{\xdef\hyphenation}
 \def\typeout#1{\xdef\format{\format#1}}
 \the\everyjob
\endgroup

\wmsg{>Release: \format}

\ifinteractive
%%
%% if interactive, \wread reads a line (verbatim) and write it to the
%% .msg file, until a blank line is entered.
%%
  \def\wread{{\catcode`\^^I=12
  \let\do\@makeother\dospecials
  \let\lastanswer\answer
  \message{=> }\read\m@ne to \answer
  \ifx\lastanswer\@empty
    \let\lastanswer\answer
  \fi
  \ifx\lastanswer\@empty
  \else
    \immediate\write\msg{\answer}
    \expandafter\wread
  \fi}}
\else
%%
%% If non-interactive, \wread just writes a blank line to the .msg file,
%% and \wmsg does not write to the terminal.
%%
  \def\wread{\wmsg{}}
\fi

%%
%% \copytomsg copies the contents of a file into the .msg file.
%% (at least it does it as well as TeX can, so there may be
%% transcription problems with 8-bit characters).
%%
%% It does a line count, and complains if the test file is
%% too large.

\chardef\inputfile=15

\newcount\linecount

\def\copytomsg#1{{%
   \def\do##1{\catcode`##1=11}%
   \dospecials
   \global\linecount\z@
   \openin\inputfile#1\relax
   \def\thefile{#1}%
   \@copytomsg
   \closein\inputfile}}

\def\@copytomsg{%
   \ifeof\inputfile
      \typeout{*** \thefile\space line count = \the\linecount}
   \else
      \global\advance\linecount\@ne
      \read\inputfile to \inputline
      \ifx\inputline\@empty
         \wmsg*{}
      \else
         \wmsg*{\inputline}
      \fi
      \expandafter\@copytomsg
   \fi}


%%
%% Test the age of the current format.
%%
\def\getage#1/#2/#3\@nil{%
  \count@\year
  \advance\count@-#1\relax
  \multiply\count@ by 12\relax
  \advance\count@\month
  \advance\count@-#2\relax}
%
\expandafter\getage\fmtversion\@nil
%%
%% \count@ should now be the age of the format in months.
%%
\ifnum\count@>12
\def\oldformat{^^J%
   ! Your LaTeX installation is more than one year old.^^J%
   ! Please consider updating LaTeX before submitting this report.^^J%
   ! At least check a current latex.bug file, to see if the bug^^J%
   ! has been fixed in the current release.^^J%
   !}
%%
%% Put the message in a macro to improve the look of the error mesage.
%%

\errhelp{If you still wish to complete the form, just type return.}
\errmessage{\oldformat}
\fi


%%
%% Now use \wmsg and \wread for each of the multi-line fields
%% in the form. Currently one-line fields use \read directly.
%%
\ifinteractive
  \typeout{^^JYour name:}
  \readifnotknown{name}
\else
  \ifx\name\undefined
    \def\name{ < ENTER YOUR NAME > }
  \fi
\fi


\ifinteractive
  \typeout{^^JYour Address (preferably email):}
  \readifnotknown{address}
\else
  \ifx\address\undefined
    \def\address{ < ENTER YOUR EMAIL ADDRESS > }
  \fi
\fi

\wmsg*{>Originator: \address \space(\name)}

%%
%% >Organisation: is really a GNATS multiline filed
%% but we treat it as a one-line field.
%%
\wmsg*{>Organization: \ifx\organisation\undefined
                        \ifx\organization\undefined\else
                           \organization
                        \fi
                       \else
                         \organisation
                       \fi}


%%
%% Test which format is being used. These fields are completed
%% automatically even if the blank template is being produced.
%%

\wmsg*{>Environment:}
\wmsg*{ Hyphenation: \hyphenation}
\wmsg*{ TeX Version: \meaning\@TeXversion}
\wmsg*{ Current Directory Syntax: \meaning\@currdir}
\wmsg*{ Input Path: \meaning\input@path}


\wmsg*{>Description:}
\typeout{}
\wmsg{Description of bug:}
\ifinteractive
  \typeout{%
    \@spaces The answer to this  question may take several lines.^^J%
    \@spaces (Each such line will be prompted by =>.)^^J%
    \@spaces Typing TWO consecutive blank lines terminates the answer.}
\else
\wmsg{ < ENTER BUG REPORT HERE >}
\fi
\wread



%%
%% insertion of the test file
%%



\ifinteractive
   \typeout{^^J%
 Name of a SHORT, SELF-CONTAINED file which indicates the problem:^^J%
 This file should be as small as possible (preferably < 60 lines)^^J%
 Any non-standard files that the test file uses should be included^^J%
 using the filecontents environment.^^J^^J%
%
 LaTeX will try to input this file, so give the full path^^J%
 if the file is not in the current directory.^^J^^J%
%
 If you are not reporting a bug, and there is therefore^^J%
 no test file, just hit <return>}
   \message{filename> }\read\m@ne to \filename
\else
   \def\filename{}
\fi

%%
%% Try to find the .tex file and .log file
%%


\ifx\filename\@empty
  \ifx\LaTeX\undefinedcommand
  \else
    \ifinteractive
      \typeout{^^J^^JNo test file.^^J^^J%
      Three classes of report are supported:^^J^^J%
      0) sw-bug:^^J\@spaces
         Bug in the software, the report should include a test file.^^J
      1) doc-bug:^^J\@spaces
         Inaccuracies in the documentation.^^J
      2) change-request:^^J\@spaces
         Not a bug, but rather a request for LaTeX to be changed.^^J}
      \message{Please select a category 0--2:  }
      \read\m@ne to \answer
      \ifx\answer\@empty
        \def\answer{-1}
      \fi
      \count@=\answer\relax
      \else
        \count@=\z@
      \fi
    \ifcase\count@
      \ifinteractive\wmsg{>Class: sw-bug}\fi
      \typeout{^^J! Please edit the message to add a test file and log!}
      \pause
      \wmsg*{^^J>How-To-Repeat:}
      \wmsg*{%
      Sample file which indicates the problem:^^J%
      ========================================^^J%
      \space< TEST FILE HERE >^^J%
      ^^J%
      The log file from running LaTeX on the sample:^^J%
      ==============================================^^J%
      \space< LOG FROM TEST FILE HERE >}
    \or
      \wmsg{>Class: doc-bug}
    \or
      \wmsg{>Class: change-request}
    \else
      \errhelp{Quit with `x' and then re-start latexbug}
      \def\badcategory{Only classes 0,1,2 are supported at this time}
      \errmessage{\badcategory}
    \fi
  \fi
\else

\filename@parse\filename

\IfFileExists{\filename}{\edef\samplefile{\filename}}{}

\IfFileExists{\filename@area\[e-mail]}
  {\edef\logfile{\filename@area\[e-mail]}}
  {\IfFileExists{\filename@area\[e-mail]}
    {\edef\logfile{\filename@area\[e-mail]}}
    {}}


%%
%% The example file goes here:
%%
\wmsg*{^^J>How-To-Repeat:}

\wmsg*{^^J%
Sample file which indicates the problem:^^J%
========================================}

\ifx\samplefile\undefinedcommand
   \typeout{^^J%
      Sample file \filename\space not found.^^J%
      Please edit \jobname.msg to include the sample file.}
   \wmsg*{ < TEST FILE HERE >}
   \pause
\else
   \copytomsg{\samplefile}
   \ifnum\linecount>60
    \typeout{%
^^J%
!!! Your test file is \the\linecount\space lines long.^^J%
!!! Such a large test file causes us problems:^^J%
!!! * It makes it difficult to track down the error^^J%
!!! * It makes our database for storing reports unnecessarily large.^^J%
!!! ^^J%
!!! Please, if at all possible, cut down your test file to the^^J%
!!! smallest file that shows the behaviour.^^J}
   \pause
   \fi
\fi


%%
%% The log file goes here:
%%
\wmsg*{^^J%
The log file from running LaTeX on the sample:^^J%
==============================================}

\ifx\logfile\undefinedcommand
   \typeout{^^J%
      Log file \filename@area\[e-mail] not found.^^J%
      Please edit \jobname.msg to include the log file.}
   \wmsg*{ < < LOG FROM TEST FILE HERE >}
   \pause
\else
   \copytomsg{\logfile}
\fi

\fi


%%
%% Closing Banner.
%%
\typeout{^^J%
============================================================}

\ifinteractive
 \typeout{^^J%
   You may wish to make further changes to the bug report file:^^J%
   `\jobname.msg'^^J%
   using your editor.}
\else
 \typeout{^^J%
   A template for submitting bug reports has been left in the file:^^J%
   \jobname.msg^^J%
   Please use your editor to complete the file before submitting^^J%
   your report.}
\fi

\let\ifinteractivetrue\iftrue
\typeout{^^J%
  If you have access to email, please send `\jobname.msg' to:^^J%
  [e-mail]  Please use the subject line:^^J%
  \@spaces Subject: \synopsis^^J%
^^J%
 (This subject will be used in all subsequent correspondence.)^^J%
^^J%
  Your message will be entered into a publicly readable database^^J%
  Accessable via the www (see bugs.txt for details).^^J%
  If do not wish this message made public, Edit the^^J%
  >Confidential: no^^J%
  field to  yes  before submitting this message.^^J%
^^J%
  Thank you for taking the time to submit a bug report.}

\wmsg*{^^J%
============================================================^^J
^^J%
   End of LaTeX2e bug report.^^J%
============================================================}

%%
%% Close the .msg output stream.
%%
\immediate\closeout\msg

%%
%% This is the TeX primitive \end command.
%%
\@@end