home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
chilidog.highland.cc.ks.us
/
chilidog.highland.cc.ks.us.zip
/
chilidog.highland.cc.ks.us
/
backup
/
bradford.20120521.bsc-campusMgr-master_loader-telnetMibs.tar.gz
/
bradford.20120521.bsc-campusMgr-master_loader-telnetMibs.tar
/
bsc
/
campusMgr
/
master_loader
/
telnetMibs
/
aironet.mib
< prev
next >
Wrap
Text File
|
2011-03-16
|
4KB
|
144 lines
//reserved0, 0xff," Reserved reason "},\
//Unspecified, 0xff," Unspecified Reason "},\
//Previous_not_valid, 0xff," Previous Authentication no longer valid "},\
//Sender_Quits_ESS_or_IBSS,0xff," Deauthenticated because sending station is leaving (has left) IBSS or ESS "},\
//Due_Inactivity, 0xff," Disassociated due to inactivity "},\
//AP_Overload, 0xff," Disassociated because AP is unable to handle all currently associated stations "},\
//Class_2_from_NonAuth, 0xff," Class 2 frame received from non-Authenticated station"},\
//Class_3_from_NonAuth, 0xff," Class 3 frame received from nonĀ”Associated station"},\
//Sender_Quits_BSS, 0xff," Disassociated because sending station is leaving (has left) BSS"},\
//Association_requester_not_authenticated,0xff," Station requesting (Re)Association is not Authenticated with responding station"},\
//{Reserved10, 0xff," Reserved"},\
////Default for all cisco Aronet
TELNET_PARAMETERS=
{
WAITFOR=PARAM.USER_WAITFOR
WRITE=PARAM.USER
WAITFOR=Password:
WRITE=PARAM.PASSWORD
WAITFOR=PARAM.ENABLE_WAITFOR_1
WRITE=PARAM.ENABLE_WRITE
WAITFOR=PARAM.ENABLE_WAITFOR_2:
WRITE=PARAM.ENABLE
WAITFOR=#
WRITE=terminal length 0
WAITFOR=#
}
TELNET_CONTROL_WORDS=
{
WAITFOR=--More--
WRITE=SPACE
}
TELNET_CONTROL_CHARS_ALLOWED=
{
ALLOW_CONTROL=10
ALLOW_CONTROL=13
}
ATTRIBUTE_NAME=Configuration
{
GROUP=Configuration
ATTRIBUTE=Configuration
SET_SINGLE_VAL= {0}
WAITFOR=#
}
ATTRIBUTE_NAME=RunningConfiguration
{
GROUP=RunningConfiguration
ATTRIBUTE=RunningConfiguration
WRITE=show run
RETVAL=#
}
ATTRIBUTE_NAME=VlanBrief
{
GROUP=VlanBrief
ATTRIBUTE=VlanBrief
WRITE=show vlans
RETVAL=#
}
ATTRIBUTE_NAME=MacAddressTableDynamic
{
GROUP=MacAddressTable
ATTRIBUTE=MacAddressTableDynamic
WRITE=show dot11 associations all-client
RETVAL=#
}
ATTRIBUTE_NAME=ShowArp
{
GROUP=ShowArp
ATTRIBUTE=ShowArp
WRITE=show arp
RETVAL=#
}
//To assign a new vlan to an SSID
//*****************************************
//#configure terminal
//#interface Dot11Radio0
//#ssid "dev"
//#vlan "2"
//#exit
//#exit
//#exit
//#*****************************************
ATTRIBUTE_NAME=SwitchSsidVlanAccess
{
GROUP=SwitchPortVlanAccess
ATTRIBUTE=SwitchPortVlanAccess
WRITE=config terminal
WAITFOR=#
SET=interface Dot11Radio0
WAITFOR=#
SET=ssid {0}
WAITFOR=#
SET=vlan {1}
WAITFOR=#
WRITE=end
WAITFOR=#
}
ATTRIBUTE_NAME=GetUser
{
GROUP=GetUser
ATTRIBUTE=GetUser
WRITE=show run | include username
RETVAL=#
}
ATTRIBUTE_NAME=AddUser
{
GROUP=AddUser
ATTRIBUTE=AddUser
WRITE=config terminal
WAITFOR=#
SET=username {0} password {0}
WAITFOR=#
SET=username {0} autocommand exit
WAITFOR=#
WRITE=end
WAITFOR=#
WRITE=clear dot11 hold-list
WAITFOR=#
}
ATTRIBUTE_NAME=RemoveUser
{
GROUP=RemoveUser
ATTRIBUTE=RemoveUser
WRITE=config terminal
WAITFOR=#
SET=no username {0}
WAITFOR=#
WRITE=end
WAITFOR=#
}
ATTRIBUTE_NAME=ClearClient
{
GROUP=RemoveUser
ATTRIBUTE=RemoveUser
SET=clear dot11 client {0}
WAITFOR=#
}
ATTRIBUTE_NAME=ClearHoldList
{
GROUP=RemoveUser
ATTRIBUTE=RemoveUser
WRITE=clear dot11 hold-list
WAITFOR=#
}