home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
chilidog.highland.cc.ks.us
/
chilidog.highland.cc.ks.us.zip
/
chilidog.highland.cc.ks.us
/
backup
/
bradford.20120521.bsc-campusMgr-master_loader-telnetMibs.tar.gz
/
bradford.20120521.bsc-campusMgr-master_loader-telnetMibs.tar
/
bsc
/
campusMgr
/
master_loader
/
telnetMibs
/
ArubaAP3.mib
< prev
next >
Wrap
Text File
|
2011-03-16
|
3KB
|
158 lines
//Default for Aruba
TELNET_PARAMETERS=
{
WAITFOR=User:
WRITE=PARAM.USER
WAITFOR=Password:
WRITE=PARAM.PASSWORD
WAITFOR=PARAM.ENABLE_WAITFOR_1
WRITE=PARAM.ENABLE_WRITE
WAITFOR=PARAM.ENABLE_WAITFOR_2
WRITE=PARAM.ENABLE
WAITFOR=#
WRITE=no paging
WAITFOR=#
LOGOUT=PARAM.LOGOUT
}
TELNET_CONTROL_WORDS=
{
WAITFOR=<SPACE>
WRITE=SPACE
WAITFOR=(yes
WRITE=YES
WAITFOR=More
WRITE=SPACE
WAITFOR=(q)
WRITE=SPACE
}
TELNET_CONTROL_CHARS_ALLOWED=
{
ALLOW_CONTROL=10
ALLOW_CONTROL=13
ALLOW_CONTROL=9
}
ATTRIBUTE_NAME=VlanBrief
{
GROUP=VlanBrief
ATTRIBUTE=VlanBrief
WRITE=show vlan
RETVAL=#
}
// WRITE=enable
// WAITFOR=Password:
// SLEEP=1
// WRITE=PARAM.ENABLE
// WAITFOR=#
//
// WRITE=exit
// WAITFOR=>
//
// {0} vlan id
ATTRIBUTE_NAME=VlanSingle
{
GROUP=VlanSingle
ATTRIBUTE=VlanSingle
SET=show vlan {0}
WAITFOR=#
}
ATTRIBUTE_NAME=RoleBrief
{
GROUP=RoleBrief
ATTRIBUTE=RoleBrief
WRITE=show rights
RETVAL=#
}
ATTRIBUTE_NAME=MacAddressTableDynamic
{
GROUP=MacAddressTableDynamic
ATTRIBUTE=MacAddressTableDynamic
WRITE=show user-table verbose
RETVAL=#
}
ATTRIBUTE_NAME=ShowArp
{
GROUP=ShowArp
ATTRIBUTE=ShowArp
WRITE=show arp
RETVAL=#
}
// In order for this to work, the switch MUST first be configured
// with the following command just once:
// configure terminal stm sta-dos-prevention enable (enables station Dos prevention)
// {0} The mac address of the client.
ATTRIBUTE_NAME=ClearClient
{
GROUP=ClearClient
ATTRIBUTE=ClearClient
WRITE=configure terminal
WAITFOR=g)
SET=stm add-blacklist-client {0}
WAITFOR=#
}
ATTRIBUTE_NAME=AllowClient
{
GROUP=ClearClient
ATTRIBUTE=AllowClient
SET=aaa user delete mac {0}
WAITFOR=#
WRITE=configure terminal
WAITFOR=g)
SET=stm remove-blacklist-client {0}
WAITFOR=#
}
//
// Sets the block time duration used with clearing a client.
// Change the value for a different delay time. default is 10 seconds
ATTRIBUTE_NAME=BlockDuration
{
GROUP=BlockDuration
ATTRIBUTE=BlockDuration
}
// {0} is the MAC address of the client to disconnect
ATTRIBUTE_NAME=DisconnectClient
{
GROUP=ClearClient
ATTRIBUTE=DisconnectClient
SET=aaa user delete mac {0}
WAITFOR=#
}
// {0} is the IP address of the affected client
// {1} is the Role name to change it to
ATTRIBUTE_NAME=ChangeRole
{
GROUP=ClearClient
ATTRIBUTE=ChangeRole
SET=aaa user add {0} role {1}
WAITFOR=#
}
ATTRIBUTE_NAME=ShowAPs
{
GROUP=ShowAPs
ATTRIBUTE=ShowAPs
WRITE=show ap database long
RETVAL=) #
}
// Initialize the switch to use the block time.
// This must be done at least once after the switch is modeled.
// This may be combined with the BlockDuration attribute
// if done infrequently.
ATTRIBUTE_NAME=Initialize
{
GROUP=Initialize
ATTRIBUTE=Initialize
SET=configure terminal stm sta-dos-prevention enable
WAITFOR=#
}
ATTRIBUTE_NAME=Logout
{
GROUP=Logout
ATTRIBUTE=Logout
WRITE=exit
WAITFOR=) >
WRITE=exit
}