home *** CD-ROM | disk | FTP | other *** search
/ chilidog.highland.cc.ks.us / chilidog.highland.cc.ks.us.zip / chilidog.highland.cc.ks.us / backup / bradford.20120521.bsc-campusMgr-master_loader-telnetMibs.tar.gz / bradford.20120521.bsc-campusMgr-master_loader-telnetMibs.tar / bsc / campusMgr / master_loader / telnetMibs / Aerohive.mib < prev    next >
Text File  |  2011-03-16  |  5KB  |  188 lines
  1. //Default for Aerohive..  
  2. TELNET_PARAMETERS=
  3. {
  4.         WAITFOR=login:
  5.         WRITE=PARAM.USER
  6.         WAITFOR=Password:
  7.         WRITE=PARAM.PASSWORD
  8.         WAITFOR=#
  9.         WRITE=console page 0
  10.         WAITFOR=#
  11. }
  12.  
  13. TELNET_CONTROL_WORDS=
  14. {
  15.         WAITFOR=<SPACE>
  16.         WRITE=SPACE
  17.         WAITFOR=(yes
  18.         WRITE=YES
  19.         WAITFOR=MORE
  20.         WRITE=SPACE
  21.         WAITFOR=(q)
  22.         WRITE=SPACE
  23.         WAITFOR=now?
  24.         WRITE=no
  25.         WAITFOR=(y/n)
  26.         WRITE=y
  27. }
  28.  
  29. TELNET_CONTROL_CHARS_ALLOWED=
  30. {
  31.         ALLOW_CONTROL=10
  32.         ALLOW_CONTROL=13
  33. }
  34.  
  35. //         ----- OBSOLETE -----
  36. // {0} = mac , {1} = SSID, {2} = filterName
  37. //    ATTRIBUTE_NAME=BlacklistClient2
  38. //    {
  39. //            GROUP=BlacklistClient2
  40. //            ATTRIBUTE=BlacklistClient2
  41. //            SLEEP=1
  42. //            SET=security mac-filter {2} default permit
  43. //            WAITFOR=#
  44. //            SET=security mac-filter {2} address {0} deny
  45. //            WAITFOR=#
  46. //            SET=ssid {1} security mac-filter {2}
  47. //            WAITFOR=#
  48. //            SET=clear auth local-cache mac {0}
  49. //            WAITFOR=#
  50. //            SET=clear auth roaming-cache mac {0}
  51. //            WAITFOR=#
  52. //    }
  53.  
  54. ///////////////////////////////////////////////////////////////
  55. // {0} = mac , {1} = SSID, {2} = filterName
  56. // First clear the MAC off the local and roaming cache, then
  57. // block the MAC from the SSID by adding a MAC filter.
  58. ///////////////////////////////////////////////////////////////
  59. ATTRIBUTE_NAME=BlacklistClient
  60. {
  61.         GROUP=BlacklistClient
  62.         ATTRIBUTE=BlacklistClient
  63.         SLEEP=1 
  64. // The following command will also propogate the cache clearing to the 
  65. // neigboring APs.  Only supported in FW version 3.3r1 and later.
  66.         SET=clear auth roaming-cache mac {0} hive-neighbors
  67.         WAITFOR=#
  68.         SET=clear auth local-cache mac {0}
  69.         WAITFOR=#
  70.         SET=security mac-filter {2} default permit
  71.         WAITFOR=#
  72.         SET=security mac-filter {2} address {0} deny
  73.         WAITFOR=#
  74.         SET=ssid {1} security mac-filter {2}
  75.         WAITFOR=#
  76. }
  77.  
  78. ///////////////////////////////////////////////////////////////
  79. // {0} = mac , {1} = SSID, {2} = filterName
  80. ///////////////////////////////////////////////////////////////
  81. ATTRIBUTE_NAME=UnBlacklistClient
  82. {
  83.         GROUP=UnBlacklistClient
  84.         ATTRIBUTE=UnBlacklistClient
  85.         SLEEP=1
  86.         SET=no ssid {1} security mac-filter {2}
  87.         WAITFOR=#
  88.         SET=no security mac-filter {2}
  89.         WAITFOR=#
  90. }
  91.  
  92. //         ----- OBSOLETE -----
  93. // Take 2: Command sequence to drop an end station off the controller.
  94. //    ATTRIBUTE_NAME=ClearClient
  95. //    {
  96. //            GROUP=ClearClient
  97. //            ATTRIBUTE=ClearClient
  98. //            SET=security mac-filter BradfordCC default permit
  99. //            WAITFOR=#
  100. //            SET=security mac-filter BradfordCC address {0} deny
  101. //            WAITFOR=#
  102. //            SET=ssid aeromac security mac-filter BradfordCC
  103. //            WAITFOR=#
  104. //            SET=clear auth local-cache mac {0}
  105. //            WAITFOR=#
  106. //            SET=clear auth roaming-cache mac {0}
  107. //            WAITFOR=#
  108. //            SLEEP=20
  109. //            SET=no ssid aeromac security mac-filter BradfordCC
  110. //            WAITFOR=#
  111. //            SET=no security mac-filter BradfordCC
  112. //    }
  113.     
  114. //  -------- NOT USED ----------------    
  115. // Command sequence to list all APs known to controller.  
  116. // For now we dont care about the APs.
  117. //ATTRIBUTE_NAME=ListAPs
  118. //{
  119. //        GROUP=ListAPs
  120. //        ATTRIBUTE=ListAPs
  121. //        WRITE=configure terminal
  122. //        WAITFOR=#
  123. //        WRITE=show wireless ap
  124. //        RETVAL=)#
  125. //        WRITE=exit
  126. //        WAITFOR=#
  127. //}
  128.  
  129. // Command sequence to read arp cache
  130. ATTRIBUTE_NAME=ShowArp
  131. {
  132.         GROUP=ShowArp
  133.         ATTRIBUTE=ShowArp
  134.         SLEEP=1
  135.         WRITE=show arp
  136.         RETVAL=#
  137. }
  138.  
  139. // Command sequence to read forwarding data
  140. // {0} = SSID
  141. ATTRIBUTE_NAME=ShowStations
  142. {
  143.         GROUP=ShowStations
  144.         ATTRIBUTE=ShowStations
  145.         SLEEP=1
  146.         SET=show ssid {0} station
  147.         RETVAL=#
  148. }
  149.  
  150. ATTRIBUTE_NAME=ShowSSID
  151. {
  152.         GROUP=ShowSSID
  153.         ATTRIBUTE=ShowSSID
  154.         SLEEP=1
  155.         WRITE=show ssid
  156.         RETVAL=#
  157. }
  158.  
  159. //  -------- NOT USED ----------------
  160. // Command sequence to read vlans
  161. //    ATTRIBUTE_NAME=ShowVlans
  162. //    {
  163. //            GROUP=ShowVlans
  164. //            ATTRIBUTE=ShowVlans
  165. //            SLEEP=1
  166. //            WRITE=show vlan
  167. //            RETVAL=#
  168. //    }
  169.  
  170. //Command sequence to read roles/profiles
  171. ATTRIBUTE_NAME=ShowProfiles
  172. {
  173.         GROUP=ShowProfiles
  174.         ATTRIBUTE=ShowProfiles
  175.         SLEEP=1
  176.         WRITE=show user-profile
  177.         RETVAL=#
  178. }
  179.  
  180. ATTRIBUTE_NAME=Logout
  181. {
  182.         GROUP=Logout
  183.         ATTRIBUTE=Logout
  184.         WRITE=exit
  185.         SLEEP=1
  186.         WRITE=N
  187. }
  188.