home *** CD-ROM | disk | FTP | other *** search
/ chilidog.highland.cc.ks.us / chilidog.highland.cc.ks.us.zip / chilidog.highland.cc.ks.us / backup / bradford.20110711.bsc-campusMgr-master_loader-telnetMibs.tar.gz / bradford.20110711.bsc-campusMgr-master_loader-telnetMibs.tar / bsc / campusMgr / master_loader / telnetMibs / aironet.mib < prev    next >
Text File  |  2011-03-16  |  4KB  |  144 lines
  1. //reserved0,        0xff," Reserved reason "},\
  2. //Unspecified,        0xff," Unspecified Reason "},\
  3. //Previous_not_valid,    0xff," Previous Authentication no longer valid "},\
  4. //Sender_Quits_ESS_or_IBSS,0xff," Deauthenticated because sending station is leaving (has left) IBSS or ESS "},\
  5. //Due_Inactivity,    0xff," Disassociated due to inactivity "},\
  6. //AP_Overload,        0xff," Disassociated because AP is unable to handle all currently associated stations "},\
  7. //Class_2_from_NonAuth,    0xff," Class 2 frame received from non-Authenticated station"},\
  8. //Class_3_from_NonAuth,    0xff," Class 3 frame received from nonĀ”Associated station"},\
  9. //Sender_Quits_BSS,    0xff," Disassociated because sending station is leaving (has left) BSS"},\
  10. //Association_requester_not_authenticated,0xff," Station requesting (Re)Association is not Authenticated with responding station"},\
  11. //{Reserved10,        0xff," Reserved"},\
  12. ////Default for all cisco Aronet
  13. TELNET_PARAMETERS=
  14. {
  15.         WAITFOR=PARAM.USER_WAITFOR
  16.         WRITE=PARAM.USER
  17.         WAITFOR=Password:
  18.         WRITE=PARAM.PASSWORD
  19.         WAITFOR=PARAM.ENABLE_WAITFOR_1
  20.         WRITE=PARAM.ENABLE_WRITE
  21.         WAITFOR=PARAM.ENABLE_WAITFOR_2:
  22.         WRITE=PARAM.ENABLE
  23.         WAITFOR=#
  24.         WRITE=terminal length 0
  25.         WAITFOR=#
  26. }
  27. TELNET_CONTROL_WORDS=
  28. {
  29.         WAITFOR=--More--
  30.         WRITE=SPACE
  31. }
  32. TELNET_CONTROL_CHARS_ALLOWED=
  33. {
  34.         ALLOW_CONTROL=10
  35.         ALLOW_CONTROL=13
  36. }
  37. ATTRIBUTE_NAME=Configuration
  38. {
  39.         GROUP=Configuration
  40.         ATTRIBUTE=Configuration
  41.         SET_SINGLE_VAL= {0}
  42.         WAITFOR=#
  43. }
  44. ATTRIBUTE_NAME=RunningConfiguration
  45. {
  46.         GROUP=RunningConfiguration
  47.         ATTRIBUTE=RunningConfiguration
  48.         WRITE=show run
  49.         RETVAL=#
  50. }
  51. ATTRIBUTE_NAME=VlanBrief
  52. {
  53.     GROUP=VlanBrief
  54.         ATTRIBUTE=VlanBrief
  55.     WRITE=show vlans
  56.         RETVAL=#
  57. }
  58. ATTRIBUTE_NAME=MacAddressTableDynamic
  59. {
  60.     GROUP=MacAddressTable
  61.         ATTRIBUTE=MacAddressTableDynamic
  62.     WRITE=show dot11 associations all-client
  63.         RETVAL=#
  64. }
  65. ATTRIBUTE_NAME=ShowArp
  66. {
  67.         GROUP=ShowArp
  68.         ATTRIBUTE=ShowArp
  69.         WRITE=show arp
  70.         RETVAL=#
  71. }
  72. //To assign a new vlan to an SSID
  73. //*****************************************
  74. //#configure terminal
  75. //#interface Dot11Radio0
  76. //#ssid "dev"
  77. //#vlan "2"
  78. //#exit
  79. //#exit
  80. //#exit
  81. //#*****************************************
  82. ATTRIBUTE_NAME=SwitchSsidVlanAccess
  83. {
  84.         GROUP=SwitchPortVlanAccess
  85.         ATTRIBUTE=SwitchPortVlanAccess
  86.         WRITE=config terminal
  87.         WAITFOR=#
  88.         SET=interface Dot11Radio0
  89.         WAITFOR=#
  90.         SET=ssid {0}
  91.         WAITFOR=#
  92.         SET=vlan {1}
  93.         WAITFOR=#
  94.         WRITE=end
  95.         WAITFOR=#
  96. }
  97. ATTRIBUTE_NAME=GetUser
  98. {
  99.         GROUP=GetUser
  100.         ATTRIBUTE=GetUser
  101.         WRITE=show run | include username
  102.         RETVAL=#
  103. }
  104. ATTRIBUTE_NAME=AddUser
  105. {
  106.         GROUP=AddUser
  107.         ATTRIBUTE=AddUser
  108.         WRITE=config terminal
  109.         WAITFOR=#
  110.         SET=username {0} password {0}
  111.         WAITFOR=#
  112.         SET=username {0} autocommand exit
  113.         WAITFOR=#
  114.         WRITE=end
  115.         WAITFOR=#
  116.         WRITE=clear dot11 hold-list
  117.         WAITFOR=#
  118. }
  119. ATTRIBUTE_NAME=RemoveUser
  120. {
  121.         GROUP=RemoveUser
  122.         ATTRIBUTE=RemoveUser
  123.         WRITE=config terminal
  124.         WAITFOR=#
  125.         SET=no username {0}
  126.         WAITFOR=#
  127.         WRITE=end
  128.         WAITFOR=#
  129. }
  130. ATTRIBUTE_NAME=ClearClient
  131. {
  132.         GROUP=RemoveUser
  133.         ATTRIBUTE=RemoveUser
  134.         SET=clear dot11 client {0}
  135.         WAITFOR=#
  136. }
  137. ATTRIBUTE_NAME=ClearHoldList
  138. {
  139.         GROUP=RemoveUser
  140.         ATTRIBUTE=RemoveUser
  141.         WRITE=clear dot11 hold-list
  142.         WAITFOR=#
  143. }
  144.