home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Jason Aller Floppy Collection
/
412.img
/
FIRETEA1.ZIP
/
READ.ME
< prev
next >
Wrap
Text File
|
1990-12-19
|
4KB
|
104 lines
ADDITIONAL INSTALLATION INSTRUCTIONS
If you install FireTeam 2200 to floppy disks instead of a hard drive,
the first time you play you must set your configuration.
If you installed to two disks, type FIRETEAM TWO to set your
FIRECON.FIG configuration file to the proper setting the first time
you play.
If you installed to three disks, type FIRETEAM THREE to set your
FIRECON.FIG configuration file to the proper setting the first time
you play.
If you ever want to change your FIRECON.FIG configuration file to the
setting for hard drive use, type FIRETEAM ONE.
Once you have set your configuration file, you do not need to type
ONE, TWO, or THREE unless you want to change the configuration.
PLAYING WITH DISSIMILAR DRIVES
As the manual states, you may play FireTeam 2200 from 2 floppy drives,
provided both have a minimum of 720K capacity. However, if the two drives
are dissimilar in type (e.g. one 5.25" drive and one 3.5" drive),
you will need to perform an extra step to completely install the
product to disks you can play from.
After you have installed the product onto 2 (or 3) disks of one type,
you will need to copy the files from the Program Disk onto a disk of
the "other" type.
For example, if you have four 5.25" installation disks, and your system
has one 1.2M 5.25" drive and one 1.44M 3.5" drive, you should install
the game from the installation disks to two 3.5" disks. Then you should
copy the 3.5" Program Disk to a 5.25" Program Disk. You may then play
FireTeam 2200 using the 5.25" Program Disk in Drive A and the 3.5" Construct
Disk in Drive B.
If you need to get even trickier because of your particular configuration,
you can install and copy files at will, provided you obey the following
guidelines when you are done:
The Program Disk must always be placed in Drive A.
The Simulation Disk (if used) and the Construct Disk must always be
placed in Drive B.
The contents of the disks after installation must be:
Program Disk
MERCLO.GXL EGAVGA.BGI FIRECON.FIG
BIT6X8.GFT BIT8X8.GFT LASERA.ROL
MISSILE.ROL GAUSS.ROL MGUN.ROL
EXPLOSIO.ROL GUNSHOT.ROL THEME.ROL
VICTORY.ROL DEFEAT.ROL ADLIB.COM
FIRETEAM.BNK FIREFX.BNK STARTUP.EXE
FIRETEAM.EXE AFVMAP2.RAW HUBBLE.RAW
HUBBLE2.RAW VALVANA.RAW AKILLIOS.RAW
MERCHI.GXL TARGETP.SCN EASYRUN.SCN
MEETING.SCN TURKEYS.SCN LCONVOY.SCN
IRIDIUMM.SCN HASTYPAT.SCN HEADQUAR.SCN
AGGRESSI.SCN BRIDGEAS.SCN RECONNAI.SCN
FIGHTING.SCN BATTLEOF.SCN INTEGRAT.SCN
KIDNAPTH.SCN INTRO.SCN SHELLS.DAT
GUNS.DAT CRITITEM.DAT TANKS.DAT
BIRDS.DAT GRUNTS.DAT PROFILES.DAT
(this disk will also contain MERC.EXE if only two disks are used)
(this disk will also contain your FireTeam files and History files)
Simulation Disk (if used)
MERC.EXE
Construct Disk
CONSTRUC.EXE CONSHI.GXL CONSLO.GXL
LEGAL INTERLUDE
The following statement is provided to fulfill requirements of our
licensing agreement with Knowledge Dynamics Corp.
The installation program used to install FireTeam 2200, INSTALL,
is licensed software provided by:
Knowledge Dynamics Corp
Highway Contract 4 Box 185-H
Canyon Lake, Texas 78133-3508
1-512-964-3994
INSTALL is Copyright (c) 1987-1990 by Knowledge Dynamics Corp which
reserves all copyright protection worldwide. INSTALL is provided to
you for the exclusive purpose of installing FireTeam 2200. SimSystems
is exclusively responsible for the support of FireTeam 2200, including
support during the installation phase. In no event will Knowledge
Dynamics Corp be able to provide any technical support for FireTeam 2200.
The customer support line for SimSystems is (415) 824-3112.
VERSION INFORMATION
This is Version 1.0 of FireTeam 2200.