REVERSE VIDEO - Reverse video text and graphics control.
BOLD - Text characters with the foreground intensity bit set are displayed with a "bold" font. Bold font characters must be available in the VGA BIOS or loaded with a \
const UI_HELP_CONTEXT HELP_VGACONF = 0x0001; // Help on WINPANEL Utility
Selection...
"TSR" program for this option to take effect.
CONTRAST ENHANCEMENT - This option offers different ways of producing greater contrast in text modes.
Black & White - This option should only be used on monochrome flat panels. It is similar to "Text/Back. Enhancement". User's preference should determine which enhancement options to use.
Greyscale/Color - This option is used to display color data on monochrome panels as shades of grey. Users with color flat panels should select this option.
Text Enhancement - This will cause colored text to have higher contrast on monochrome flat panels.
Background Enhancement - This option causes high contrast in backgrounds. Colored backgrounds are displayed as either black or white.
Text/Back. Enhancement - This option is equivalent to selecting both text and background enhancement. Text enhancement maintains contrast from the background.
EXPAND MODE - This function controls the vertical expansion of text and graphics mode to fill as much of the panel as possible.
VERTICAL POSITION - This function controls the vertical placement of the video modes that do not use the full flat panel display. This option has no effect while expand mode is turned on. Takes effect immediately when the panel is the active display.
DISPLAY - This function controls whether the panel, or CRT is the current output device. In SimulSCAN both the panel and CRT are active. This is generally used as a presentation mode. The display will be optimized for the CRT. Some options such as expand mode and bold font have no effect in SimulSCAN.
BUS WIDTH - This function sets 8-bit or 16-bit operation in an environment where 16-bit operation is possible.
INHIBIT FONT LOAD - When the panel is the active display, a supplemental font is loaded to enhance the display quality. This supplemental font is for text mode only.
FULL HEIGHT CURSOR - This option creates a full character sized block cursor on the panel. This larger cursor is helpful for quickly locating the cursor on the panel.
RGB WEIGHTING - Change gray scale values on a monochrome flat panel or the red, green, and blue values on a color flat panel. This option allows the user to configure color weighting to personal preference. Changes take effect immediately, when the panel is the active display.
POWER MANAGEMENT - Stand-by power down mode is an automatic power save feature. When no activity is detected for a preprogrammed time period, then stand-by mode is entered. Stand-by mode conserves power, allowing longer battery operation. THIS OPTION WILL ONLY BE AVAILABLE IN PANEL MODE. IF YOU ARE CHANGING THE DISPLAY TO CRT OR SIMULSCAN YOU SHOULD DISABLE THE POWER MANAGEMENT TIMER.
Note: Some options are designed for a specific display mode, that is CRT, SimulSCAN, or flat panel. The following options take effect only in flat panel mode: Bold, Contrast Enhancement, Vertical Position, Full Height Cursor, and RGB Weighting. In SimulSCAN and flat panel modes, Reverse Video may be used. At any time, Display, Bus Width, and Inhibit Font Load may be used.
(.txt)