home *** CD-ROM | disk | FTP | other *** search
/ The Fred Fish Collection 1.5 / ffcollection-1-5-1992-11.iso / ff_disks / 200-299 / ff252.lzh / CrossDOS / READ.ME < prev    next >
Text File  |  1989-10-15  |  4KB  |  91 lines

  1.                                 CrossDOS
  2.                           Version 3.05b READONLY
  3.  
  4.  
  5. We  at  CONSULTRON  would  like to thank you for trying CrossDOS.
  6. We believe you will find it useful and easy to use.
  7.  
  8. The  version  you  are  trying  is  the READONLY release of the final
  9. product.   It  is  fully  functional  with  all  the  write functions
  10. disabled.  The READONLY version is freely-distributable (please refer
  11. to  the  disk  manual, section "COPYRIGHTS" for further restrictions)
  12. and the READ/WRITE version is availiable directly from CONSULTRON for
  13. $30.00 (US) plus $3.00 shipping and handling.  If you wish to support
  14. your  local  dealer,  give  them  a  copy  of the READONLY version of
  15. CrossDOS  and  suggest they place an order for the READ/WRITE version
  16. (dealer discounts are availiable).
  17.  
  18.  
  19. *******************************************
  20. Installing this Product
  21.  
  22. I have included a simple program called "Install_MSDOSFS".  It can be
  23. run  from  the CLI or from Workbench.  It will prompt you through the
  24. installation  procedure.   The  program  is  broken  up into separate
  25. transfer  procedures that allow you to install portions that apply to
  26. your  system configuration.  If you wish, you can install the product
  27. manually  by  placing  the necessary files in the correct directories
  28. (please refer to the manual supplied with CrossDOS).
  29.  
  30.  
  31. *******************************************
  32. TDPatch12 and TDPatch13
  33.  
  34. The trackdisk.device code resident in Kickstart code versions 1.2 and
  35. 1.3  have a couple bugs in it that need fixing.  The bugs appear only
  36. if  you  have  one  3  1/2"  floppy  drive  connected on your system.
  37. TDPatch12  and  TDPatch13 correct this problem for KickStart V1.2 and
  38. V1.3   respectively.   The  installation  program  will  detect  this
  39. condition  if  it exists on your system and transfer the proper patch
  40. version  to  your  C:   directory.   It  will also try to append your
  41. s:startup-sequence  with  the  patch.   (You  may  need  to edit your
  42. s:startup-sequence to make sure it gets placed in correctly.)
  43.  
  44. If  the  patch  is required, it must be executed before accessing any
  45. MS-DOS disk.
  46.  
  47. Earlier  versions  of  TDPatch13 had a bug in IT that would not allow
  48. the patch to be applied.  It has been fixed in this version.
  49.  
  50. TDPatch will not work in conjunction with NOCLICKSTART.
  51.  
  52.  
  53. *******************************************
  54. MS-DOS Hard Disk Partitions
  55.  
  56. The  MS-DOS  file  system  is  designed  to read (and write) physical
  57. MS-DOS  hard  drive  partitions,  although  it  has  not  been tested
  58. thoroughly.
  59.  
  60. The  installation  program  does not cover hard drive installation so
  61. that  creating  a  mountlist entry for it must be done manually.  You
  62. must  configure the mountlist entries so that the lowest block number
  63. points  to  the  boot block of the partition you wish to access.  The
  64. "device  = " entry must also be the device driver for your hard drive
  65. controller board.
  66.  
  67. I  must  also caution you about the fact that accessing the partition
  68. at the device driver level has no means of detecting ownership of the
  69. blocks.  In other words, both your Amiga and the MS-DOS host computer
  70. believe  it  has FULL control over the data written to the partition.
  71. To  help  prevent  this conflict, if one host writes to the partition
  72. the  other  host  must  "change the disk".  To change the disk on the
  73. Amiga  host,  execute  the  "diskchange"  command for that drive.  To
  74. change the disk on the MS-DOS host, change the default drive FROM the
  75. partition  then back TO the partition (ie.  from C:  to A:  then back
  76. to C:).
  77.  
  78.  
  79. *******************************************
  80. Technical Support
  81.  
  82. Should you have any questions or problems, you can contact us at:
  83.  
  84. CONSULTRON
  85. 11280 Parkview
  86. Plymouth, MI  48170
  87.  
  88. (313) 459-7271      9:00 AM - 5:00 PM EST
  89.  
  90. Thank you.
  91.