home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Freelog Special Edition 19
/
FreelogHS19.iso
/
Soundfonts
/
SGM150v1.40
/
TOOLS
/
CtPanel.exe
/
string.txt
next >
Wrap
Text File
|
2003-10-06
|
4KB
|
115 lines
1 Audio Control Panel
2 Creative Audio Driver Control Panel
3 Speaker Settings
4 Decoder
5 EAX Effects
6 Headphone
7 Speaker / Headphone Selection
8 CMSS 3D Selection
9 Restore Factory Default
10 Audio Effects
11 Effect Parameters
12 SPDIF Input
13 Digital Out Sampling Rate
14 Decoder Options
15 Speaker
16 Mixer
18 Add
20 Remove
21 Active Creative Speaker Configuration
22 CMSS 3D State
25 Save Environment
26 Delete Environment
27 Import Environment
28 Export Environment
29 Add new effect plugins
30 Remove loaded effect plugins
31 Allow Microsoft Speaker Setup Control Panel to change Creative Speaker Configuration.
32 Use Installed Decoder
33 Enable Dynamic Range Compression
34 Enable Dolby Pro Logic
35 Enable Dolby Digital EX
36 SPDIF Passthrough (Dolby Digital / DTS Digital Out)
37 (Note : External Decoder required.)
38 Amount :
39 Allow Microsoft Speaker Setup Control Panel to change Creative Speaker Configuration.
40 Stereo Focus
41 Rear
42 Front
43 Optimize 3-D effects for headphones when using headphones.
44 Mute speakers upon Headphone Jack Detection.
45 Change Creative Speaker Configuration based on Speaker Jack Detection.
46 The setting was changed, however you cannot overwrite a factory setting. Please save the changed setting under a different name.
47 Saving Effects
48 Save as :
49 Available Effects
50 Effect
51 Type
52 Play Into
53 Amount
54 Ok
55 Cancel
56 The maximum number of Efx Plugins are already loaded.
57 Creative
59 Settings have been changed. Would you like to save these settings?
60 Minimize
61 Close
62 The mixer preset has been successfully restored to the factory default.
63 Fx
64 Eq
65 Env
66 Custom
67 Master
68 The Original Sound, Reverb and Chorus effects cannot be removed.
69 Default
70 SPDIF Bypass
71 AC3 SPDIF-In Decode
72 The Creative Audio Driver is not installed
73 Enable DTS-ES Matrix 6.1 for decoding 5.1-channel soundtracks
74 4 / 5.1 Content Speaker Mapping Settings
75 When playing 5.1 content in a 7.1 speaker configuration, the left-surround and right-surround channels of the 5.1 content shall be mapped to :
76 Side Speakers
77 Rear Speakers
78 Side Speakers and Rear Speakers
79 4 / 5.1 Content Speaker Mapping Settings
80 Dolby Digital (AC-3)
81 DTS-ES Decode
82 Preset export successful.
83 Preset export failed.
84 Preset name should not be empty !
85 Preset import successful.
86 Preset import failed.
87 Preset save failed.
88 CMSS Off
89 CMSS 1
90 CMSS 2
91 Stereo Surround
92 Bit-Accurate Mode
94 Enable Bit-Accurate Recording
95 Equalizer
96 On / Off
97 Reset
98 PreAmp
99 Bit Accurate mode allows you to record audio data directly from the S/PDIF Input without any form of audio enhancement or modification.
100 Device Settings
101 Type :
102 Bits Per Sample :
103 Sampling Rate :
104 Mode :
105 SPDIF Signal :
106 Audio
107 Data
108 Stereo
109 Settings
110 Dolby Digital ( AC-3 ) Decode
111 Sound Device
112 Select the Speaker setup that is most like the setup you have on your computer.
113 You can configure digital Input setting here.
114 You can configure the Headphones settings for the Audigy drive or Live! drive here.
115 You can either set the supported decoder properties or select passthrough mode.
116 You can configure the sampling rate of the PCM SPDIF output of your Digital Out connector here.
117 Bass Management Settings
118 Bass Redirection
119 Bass Boost
120 You can customise your Equalizer Settings here.