ftp.pasteur.org/FAQ/

home *** CD-ROM | disk | FTP | other *** search

/ ftp.pasteur.org/FAQ/ / ftp-pasteur-org-FAQ.zip / FAQ / LANs / token-ring-faq < prev

Wrap

Internet Message Format | 2004-04-18 | 50.1 KB

Path: senator-bedfellow.mit.edu!dreaderd!not-for-mail Message-ID: <LANs/token-ring-faq_1082200966@rtfm.mit.edu> Supersedes: <LANs/token-ring-faq_1079601013@rtfm.mit.edu> Expires: 31 May 2004 11:22:46 GMT X-Last-Updated: 1999/07/09 Organization: none From: James@NetworkUptime.com Newsgroups: comp.dcom.lans.token-ring,comp.answers,news.answers Subject: comp.dcom.lans.token-ring FAQ Approved: news-answers-request@MIT.EDU Followup-To: comp.dcom.lans.token-ring Originator: faqserv@penguin-lust.MIT.EDU Date: 17 Apr 2004 11:27:49 GMT Lines: 1056 NNTP-Posting-Host: penguin-lust.mit.edu X-Trace: 1082201269 senator-bedfellow.mit.edu 576 18.181.0.29 Xref: senator-bedfellow.mit.edu comp.dcom.lans.token-ring:9465 comp.answers:56869 news.answers:269910 Archive-name: LANs/token-ring-faq Posting-Frequency: monthly Last-modified: 1999/07/08 Version: 990708 URL: http://www.NetworkUptime.com/faqs/token-ring Copyright: (c) 1999 James Messer Maintainer: James Messer <James@NetworkUptime.com> comp.dcom.lans.token-ring Frequently Asked Questions ---------------------------------------------------- This document is provided as is without any express or implied warranties. While every effort has been taken to ensure the accuracy of the information contained in this article, the authors assume no responsibility for errors or omissions, or for damages resulting from the use of the information contained herein. The contents of this article reflect my opinions only and not necessarily those of my employer. FAQ Table of Contents --------------------- 1.0 FAQ Administration [1.1] What is this FAQ? [1.2] Who maintains this FAQ? [1.3] Where can this FAQ be found? [1.4] Who provides information to the FAQ? [1.5] Can I use this FAQ on my web page? [1.6] Copyright Information 2.0 Introduction to Token Ring [2.1] What is token ring? [2.2] How do Ethernet and token ring networks compare? [2.3] Where are the IEEE specifications? 3.0 General Token Ring Information [3.1] How does token ring work? [3.2] What is used to convert between Ethernet and Token Ring? 4.0 Token Ring Physical Layer [4.1] What physical devices are required for a token ring network? [4.2] What types of cables are used for token ring? [4.3] What pin assignments are used in token ring cabling? [4.4] What is the difference between a MAU, a CAU, and a LAM? [4.5] Can two token ring stations be directly attached? [4.6] What is the maximum distance between token ring stations? [4.7] What is the formula for computing adjusted ring length (ARL)? [4.8] Why is ring length important? [4.9] At what speeds does token ring run? [4.10] How many stations are supported by a single token ring network? [4.11] What is High Speed Token Ring? 5.0 Token Ring Data Link Layer [5.1] What is a token? [5.2] What are MAC frames? [5.3] What are LLC frames? [5.4] What are Locally Administered Addresses (LAAs)? [5.5] What are functional addresses? [5.6] What is an Active Monitor and Standby Monitor? [5.7] What is early token release? [5.8] What is transparent bridging? [5.9] What is spanning tree bridging? [5.10] What is source route bridging? [5.11] What is token ring switching? [5.12] What is the process for inserting into a ring? [5.13] How do you troubleshoot the insertion process? 6.0 Token Ring Errors and Troubleshooting [6.1] What are isolating and non-isolating errors? [6.2] What is the claim process? [6.3] What is a beacon frame? [6.4] What is promiscuous mode? [6.5] What software is available to monitor a token ring network? 7.0 Other Information [7.1] What token ring books are available? [7.2] What certifications are available regarding token ring networks? [7.3] What companies make token ring adapter cards and MAUs? 1.0 FAQ Administration [1.1] What is this FAQ? This FAQ will attempt to explain and decipher the intricacies of token ring networking and answer some of the most common questions relating to token ring networks. Although it contains technical information, this FAQ is best used as an introduction to token ring networking. See section [7.1] for token ring book and publication information. [1.2] Who maintains this FAQ? This FAQ is maintained by James Messer <James@NetworkUptime.com>. Questions, comments, corrections, and contributions are encouraged! [1.3] Where can this FAQ be found? This FAQ will be posted to the comp.dcom.lans.token-ring newsgroup on the first of each month. An archive of the FAQ can be found at: ftp://rtfm.mit.edu/pub/faqs/LANs/token-ring-faq A HTTP version of this FAQ can be found at: http://www.NetworkUptime.com/faqs/token-ring [1.4] Who provides information to the FAQ? In many cases, the FAQ questions and answers are summarized from the comp.dcom.lans.token-ring newsgroup. Other submissions to the FAQ were contributed by: Lawrence L. Baldwin <baldwinl@mindspring.com> Kris Carlier <carlier@iguana.be> David Holbrook Neil Jarvis <Neil.Jarvis@york.microvitec.co.uk> Bernie Keenan <bkeenan@ccmailpc.ctron.com> John Kristoff <JTKRISTO@hewitt.com> Mark R. Kuijper <Mark.Kuijper@cmg.nl> Richard F. Masoner <richardm@cd.com> Michele Mastroianni <mastro@risc380.ceda.unina.it> Send any corrections or FAQ additions to James@NetworkUptime.com. Our thanks to all who have provided information to the FAQ! Keep those submissions coming! [1.5] Can I use this FAQ on my web page? Since this FAQ changes almost daily, a copy of the FAQ on your web page would be out of date in a very short time. Please don't do this! A more appropriate method would be to set a hyperlink to the URL found in the secondary header of this FAQ. Please send an e-mail to James@NetworkUptime.com if you plan on adding a link to this FAQ to your web page. I reserve the right to restrict the use of this FAQ. [1.6] Copyright Information Copyright (c) 1999 by James Messer, all rights reserved. This FAQ may be posted to any USENET newsgroup, on-line service, or BBS as long as it is posted in its entirety, includes this copyright statement, and includes written permission from James@NetworkUptime.com. 2.0 Introduction to Token Ring [2.1] What is token ring? Token ring is the IEEE 802.5 standard that connects computers together in a closed ring. Devices on the ring cannot transmit data until permission is received from the network in the form of an electronic 'token'. [2.2] How do Ethernet and token ring networks compare? Token Ring is single access, meaning there is only one token. Thus, at any given time only one station is able to use the LAN. Ethernet is a shared access medium, where all stations have equal access to the network at the same time. [2.3] Where are the IEEE specifications? The IEEE specifications can be purchased from the IEEE at: http://standards.ieee.org/catalog/IEEE802.3.html Information on all IEEE standards can be found at: http://www.ieee.com For more information on the 802.5 standards, see The official IEEE 802.5 web site at: http://p8025.york.microvitec.co.uk/ 3.0 General Token Ring Information [3.1] How does token ring work? A token ring network uses a special frame called a token that rotates around the ring when no stations are actively sending information. When a station wants to transmit on the ring, it must capture this token frame. The owner of the token is the only station that can transmit on the ring, unlike the Ethernet topology where any station can transmit at any time. Once a station captures the token, it changes the token into a frame format so data can be sent. As the data traverses the ring, it passes through each station on the way to the destination station. Each station receives the frame and regenerates and repeats the frame onto the ring. As each station repeats the frame, it performs error checks on the information within the frame. If an error is found, a special bit in the frame called the Error Detection bit is set so other stations will not report the same error. Once the data arrives at the destination station, the frame is copied to the destination's token ring card buffer memory. The destination station repeats the frame onto the ring, changing two series of bits on the frame. These bits, called the Address Recognized Indicator (ARI) and the Frame Copied Indicator (FCI), determines if the destination station had seen the frame and has had ample buffer space available to copy the frame into memory. If the frame is not copied into memory, it is the responsibility of the sending station to retransmit the frame. The frame continues around the ring, arriving back at the source station who recognizes the sending address as it's own. The frame is then stripped from the ring, and the source station sends a free token downstream. [3.2] What is used to convert between Ethernet and Token Ring? There is no 'converter' that allows an Ethernet network and Token Ring network to communicate between each other. A conversion process must occur between the two topologies, since they both use different signaling types, frame structures, and frame sizes. There are two methods to accomplish this 'conversion'; bridging, and routing. Bridging -------- Bridging is a method of communicating between devices at OSI layer 2, the data link layer. A bridge connects two networks together and acts as a traffic director. If traffic is destined to the other network, the bridge allows the traffic to pass. If the traffic is local to a single network, the bridge does not pass the traffic unnecessarily to the other connected network. The bridge makes this determination based on the Media Access Control (MAC) address of the workstations on the network. The bridge keeps an updated list of everyone active on the network, and uses this list to direct traffic from one network to another. This method of operation makes the network appear as a single logical network, since the only separation of traffic from one network to another is done at the MAC address level. There are many bridge manufacturers and bridge types on the market. The newest version of this bridging technology is called a DLC Switch or LAN Switch. These switches have a much higher port density than the older two or three port bridges, allowing for much more flexibility and network segmentation. Routing ------- The second method of 'converting' from Ethernet to Token Ring is called routing. Routing occurs at OSI layer 3, and separates physical networks into separate logical networks. This differentiates routing from bridging, since bridging maintains a single logical network. In a routed network, the sending workstation determines if outgoing traffic is local or remote. If the traffic belongs to another network, the originating station sends the frame directly to the router for further processing. Upon receiving the frame from the source workstation, the router examines the frame for the destination address. The router maintains a routing table which is used to determine the final destination of the data packet through the router. Routing is the most common method of connecting Ethernet networks to Token Ring networks in most organizations. Most network operating systems have routing capabilities built into the servers. By placing a token ring and Ethernet card into a Novell NetWare 3.x/4.x or Windows NT v4.x server, the two topologies can communicate between each other. One caveat; some protocols are not routeable. A good example is Microsoft's NetBEUI, which has no OSI layer 3 network address and therefore cannot be routed. Protocols which cannot be routed must be bridged between physical networks. 4.0 Token Ring Physical Layer [4.1] What physical devices are required for a token ring network? Token ring connectivity requires three separate physical entities; a Multistation Access Unit (MAU), a token ring lobe cable, and a token ring adapter card. A Multistation Access Unit (MAU or MSAU) is a hub-like device that connects to all token ring stations. Although the token ring stations are attached to the MAU in a physical star configuration, a true ring is maintained inside the MAU. Unlike an Ethernet hub, a MAU consists of physical or electronic relays which keep each station in a loopback state until a voltage is sent from the station to the MAU. Since this voltage does not affect data communications, it is referred to as a 'phantom' voltage. Once this phantom voltage is received by the MAU, a relay is activated that inserts the token ring station onto the ring. MAUs are connected together with Ring In/Ring Out (RI/RO) cables. To maintain a true ring, both the RI and the RO ports must be connected from one MAU to the other. A token ring lobe cable connects the token ring station to the MAU. This cable communicates over four wires; two for transmit and two for receive. The cable can be Shielded Twisted Pair (STP) or Unshielded Twisted Pair (UTP). A token ring adapter card is the physical interface that a station uses to connect to a token ring network. There are token ring adapter cards for almost every computer bus type. [4.2] What types of cables are used for token ring? There are three major physical token ring cabling systems; Shielded Twisted Pair (STP), Unshielded Twisted Pair (UTP), and optic fiber. [4.3] What pin assignments are used in token ring cabling? An IBM-type Data Connector or Universal Data Connector (IDC or UDC), is a hermaphroditic connector (neither male nor female). These connectors attach to each other without having a specified male or female connector type on each end. These connectors are commonly found on IBM Type 1 cabling, a two-pair shielded cable. The UDC connector has the following cabling requirements: Red - Receive + Green - Receive - Orange - Transmit + Black - Transmit - A DB-9 connector uses four wires (two pairs) for token ring networking: Pin 1 - Red - Receive + Pin 5 - Black - Transmit - Pin 6 - Green - Receive - Pin 9 - Orange - Transmit + A RJ-45 connector is an eight wire twisted pair cable: Pin 3 - Blue/White - Transmit - Pin 4 - White/Orange - Receive + Pin 5 - Orange/White - Receive - Pin 6 - White/Blue - Transmit + RJ-11 connectors are rarely used: Pin 2 - Blue/White - Transmit - Pin 3 - White/Orange - Receive + Pin 4 - Orange/White - Receive - Pin 5 - White/Blue - Transmit + [4.4] What is the difference between a MAU, a CAU, and a LAM? A MAU is a 8228 Multistation Access Unit. This unit provides eight workstation connectors and 2 MAU ports (also called Ring In/Ring Out ports). A CAU is a 8230 Controlled Access Unit (Basically a MAU with intelligence). A CAU supports up to four LAMs. The Ring In/Ring Out ports of a CAU are copper, but can replaced with fiber connectors. A LAM is a Lobe Attachment Module for the 8230. Each LAM supports 20 workstations. [4.5] Can two token ring stations be directly attached? Unlike Ethernet stations, token ring stations _cannot_ be directly attached with a cross-over cable. Because of the process required for inserting into a ring, a loopback process must complete and phantom voltage must exist on a wire for a relay to open. A MAU must be used to directly connect two workstations. However, some token ring switches allow a station to directly connect to a _switch_. This Direct Token Ring (DTR) connection is a non-standard method of connecting a switch and a workstation onto a single ring. This non-standard DTR connectivity does _not_ allow for two workstations to be directly connected. [4.6] What is the maximum distance between a MAU and a token ring station, or between two token ring stations? In token ring networking, distance requirements are different from vendor to vendor. In general terms, the recommended standard distance between stations for Type 1 cabling is approximately 300 meters, and the recommended standard distance between stations for UTP cabling is about 150 meters. Token ring distances are computed as the distance between repeaters. IN a token ring network, each Network Interface Card (NIC) is a repeater. Therefore, the length between stations cannot exceed the cable lengths listed above. Some manufacturers use 'active' MAUs which can regenerate the token ring signal and act as a repeater. In these cases, the distances between the token ring workstations and the MAUs can be much larger than many 'passive' MAUs. Many active MAUs have other network management features such as SNMP capabilities and auto-station removal for stations inserting at the incorrect speeds. [4.7] What is the formula for computing adjusted ring length (ARL)? The adjusted ring length of a token ring network is the sum of all cable lengths between wiring closets, minus the shortest cable between wiring closets. The ARL is used to determine the total length of the ring, and the maximum lobe distances (see section [4.8]). This calculation determines the ring length if part of the ring is removed for troubleshooting. When a cable is removed from a Ring In/Ring Out port, the loop-back creates a much larger ring than normal. The ARL calculation defines the largest ring size that can occur, based on the shortest cable between wiring closets. [4.8] Why is ring length important? The design of any network is dependent on limits. In token ring networks, ring length is a large factor in the physical design of an error-free network. If the ring is too long, timing and attenuation issues can create physical-layer errors, disrupting communication over the entire ring. In the design of a token ring network, total ring length dictates the maximum length of cable between the workstation and the MAU. This value, called the lobe length, can be computed with a series of tables. These tables are computed for passive MAU networks. Active MAUs provide capabilities that deviate greatly from the values in these tables. Consult the manufacturer of the active MAUs for values that are appropriate for that equipment. [4.9] At what speeds does token ring run? Token ring runs at speeds of 4 megabits per second (500,000 bytes per second) and 16 megabits per second (2,000,000 bytes per second). Some token ring switches support a non-standard referred to as Direct Token Ring (DTR), or full-duplex token ring. This allows for 16 megabit speeds in the sending and receiving directions simultaneously, for a maximum of 32 megabits per second (4,000,000 bytes per second). [4.10] How many stations are supported by a single token ring network? Again, this number is dependent on the token ring equipment that is used in the network. Current standards list a maximum of 72 stations on a UTP ring, and approximately 250 to 260 on a Type 1 network. [4.11] What is High Speed Token Ring? High Speed Token Ring, or HSTR, is a new token ring standard that promises to push token ring speeds to 100 Mbps and 1 Gbps. The High Speed Token Ring Alliance consists of 3Com, Bay Networks, IBM, Madge, Olicom, UNH Interoperability Lab, and Xylan. The first HSTR specification will allow for 100 Mbps token ring speeds over both Type 1 and UTP copper cabling. Further specifications will tackle 100 Mbps token ring over fiber. These standards are due for completion in June or July of 1998. Another HSTR specification will allow for 1 Gbps HSTR over fiber, and this standard is due to be completed at the end of 1998. For more information on HSTR, see: http://www.hstra.com 5.0 Token Ring Data Link Layer [5.1] What is a token? A token frame is a three byte frame that takes this format: +--------+--------+--------+ | SDEL | AC | EDEL | | 1 byte | 1 byte | 1 byte | +--------+--------+--------+ The Starting Delimiter (SDEL) byte is coded as JK0JK000, where the J and K bits are intentional Manchester encoding violations. These intentional violations delineate the token from normal traffic data. J is the encoding violation of a 1, and K is the encoding violation of a 0. The Access Control (AC) byte is coded as PPPTMRRR. The priority bits (PPP) provide eight levels of priority (000 through 111). The token indicator bit (T) of 0 determines that the following information is a token, a 1 designates the following information is a frame. The Monitor bit (M) is used to prevent frames from constantly circling the ring. The Priority Reservations bits (RRR) provide token reservation to ring stations. The Ending Delimiter (EDEL) byte is coded as JK1JK1IE, where the J and K bits are encoding violations and the I and E bits are the intermediate frame and error detection bits, respectively. The intermediate bit is set to 1 if there are more frames to transmit in this set. The error detection bit is set to 1 by a station that recognizes a CRC error in the frame so other stations downstream do not report the same error. [5.2] What are MAC frames? A Media Access Control (MAC) frame is used for management of the token ring network. MAC frames do not traverse bridges or routers, since they carry ring management information for a single specific ring. The MAC frame has this format: +-----+-----+-----+-----+-----+-----+-----+-----+-----+ | SD | AC | FC | DA | SA |Data | FCS | ED | FS | +-----+-----+-----+-----+-----+-----+-----+-----+-----+ Size 1 1 1 6 6 >=0 4 1 2 in bytes Starting Delimiter (SD) - See section [5.1]. Access Control (AC) - See section [5.1]. Frame Control (FC) - The frame control field consists of eight bits, coded as TT00AAAA. The Frame Type bits (T) indicate the frame type. Bits 2 and 3 are reserved, and are always zero. Bits four through eight are Attention Codes which provide the token ring adapter of incoming MAC information that can be copied to a special Express Buffer in the token ring adapter. Destination Address (DA) - The Destination Address specifies which station is to receive the frame. The Destination Address can be sent to a specific station, or a group of stations. Source Address (SA) - The Source Address is the MAC address of the sending station. Data - A MAC frame data field contains token ring management information, and a non-MAC (LLC) data field contains user data. Frame Check Sequence (FCS) - A 32 bit Cyclical Redundancy Check (CRC) is performed on the frame data to provide an integrity check of the frame data. As each station copies the frame, the CRC is computed and compared with the value in the FCS frame to verify that the frame data is correct. Ending Delimiter (ED) - See section [5.1]. Frame Status (FS) - The Frame Status field provides information for the sending station regarding the status of the frame as it circulates the ring. The Frame Status field is coded as AF00AF00. The bits of the Frame Status field are duplicated, since this field does not fall under the CRC checking of the Frame Check Sequence bytes. The Address Recognized Indicator (ARI) is set to 1 by the destination station if the destination station recognizes the frame. The Frame Copied Indicator (FCI) is set to 1 if the destination station was able to copy the frame into the local adapter buffer memory. [5.3] What are LLC frames? A Logical Link Control (LLC) frame is used to transfer data between stations. LLC frames have the same frame structure as MAC frames, except frame type bits of 01 are used in the Frame Control (FC) byte. [5.4] What are Locally Administered Addresses (LAAs)? Token ring addresses are either locally administered or universally administered. Locally administered addresses are assigned by a local manager and universally administered addresses are assigned by a standards organization. Locally administered addresses are designated by bit one set to 1 in byte zero of the destination address field. [5.5] What are functional addresses? Functional addresses are assigned by the token ring specification to allow for communication to functional devices. Some devices include: Device Functional Address ------ ------------------ Active Monitor C0 00 00 00 00 01 Ring Parameter Server C0 00 00 00 00 02 Ring Error Monitor C0 00 00 00 00 08 Configuration Report Server C0 00 00 00 00 10 Source Route Bridge C0 00 00 00 01 00 [5.6] What is an Active Monitor and Standby Monitor? Devices are either active monitors or standby monitors. There can only be a single active monitor on a physical token ring. Any station on the ring can assume the role of Active Monitor. All other stations on the ring are standby monitors. The Active Monitor provides many functions on a token ring network: * The Active Monitor is responsible for master clocking on the token ring network and the lower level management of the token ring network. * The Active Monitor inserts a 24-bit propagation delay to prevent the end of a frame from wrapping onto the beginning of the frame. * The Active Monitor confirms that a data frame or good token is received every 10 milliseconds. This timer sets the maximum possible frame size on a token ring network to 4048 bytes on a 4 megabit ring, and 17,997 bytes on a 16 megabit ring. * The Active Monitor removes circulating frames from the ring. As a frame passes the Active Monitor, a special bit called a monitor count bit is set. If the monitor count bit is set, the Active Monitor assumes the original sender of the frame was unable to remove the frame from the ring. The Active Monitor purges this frame, and sends a Token Error Soft Error to the Ring Error Monitor. If the Active Monitor is removed from the ring or no longer performs the Active Monitor functions, one of the Standby Monitors on the ring will take over as Active Monitor. [5.7] What is early token release? In normal token ring operation, a station sending information holds the token until the sending data circles the entire ring. After the sending station strips the data from the ring, it then issues a free token. With Early Token Release (ETR), a token is released immediately after the sending station transmits its frame. This allows for improved performance, since there is no delay in the downstream neighbor waiting for the token. ETR is only available on 16 megabit rings. Stations running ETR can coexist with stations not running ETR. [5.8] What is transparent bridging? Transparent bridging is a method to connect two similar network segments to each other at the datalink layer. It is done in a way that is transparent to end stations, hence end-stations do not participate in the bridging algorithm. Transparent bridges are sometimes called (self) learning bridges. When they are turned on and receive data packets from a network segment they 1) learn the relation between MAC address and segment/port, and 2) forward the packet to all (!) other segments/ports. The first step in this process is essential to the "learning" aspect of the bridge. After some time the bridge has learned that a particular MAC address, say MACa, is on a particular segment/port, say PORT1. When it receives a packet destined for the MAC address MACa (from any port not being PORT1) it will no longer forward the packet to all ports (step 2). It knows that MACa is associated with PORT1 and will only forward the packet to PORT1. Please note that transparent bridging is most often used in a Ethernet environment. In a token-ring environment it can be used but is not common. In a token-ring environment source route bridging is most often used. [5.9] What is the spanning tree protocol? Spanning tree is a protocol defined in IEEE 802.1q to prevent bridges from creating network loops. Using the spanning tree protocol, bridges communicate to each other and disable certain ports/segments to prevent looping of packets. Many implementations of the spanning tree protocol are configured so an alternate path is available to network traffic, should the original path become disabled. [5.10] What is source route bridging? Source route bridging is a method to connect two similar network segments to each other at the datalink layer. It is done in a "distributed way" where end-stations participate in the bridging algorithm, thus the name _source_ routing. (as compared to transparent bridging, refer to 5.9]). In a source-route bridging environment a source end-station will sent out a "route explorer" frame (broadcast) to find out the route to the destination end-station. Source route bridges will forward these frames to all segments/ports. The source route bridge will add route information (the segment the packet came from) to the frame prior to forwarding it. This route information is called the Routing Information Field (RIF). Eventually, the route explorer frame reaches the destination end-station INCLUDING THE COMPLETE ROUTE (via the RIF) the packet took. The destination end-station then uses this RIF to reply to the source end-station directly (i.e. no broadcast). Please note that the reply traverses all bridges in reverse order of the route explorer frame and INCLUDES THE RIF. When the reply reaches the source end-station, the complete network route is known by both the source and destination end-stations. Subsequent packets will use this route information (i.e. no broadcast). It is possible that a network has multiple routes to a destination end-station. In this scenario, the source end-station will receive more than one reply to the route explorer broadcast. In most cases, the source end-station uses the route that was received first. In a source-route bridging environment, the end-stations discover and store information about the network topology. In a transparent bridging environment, the (transparent) bridge discovers and stores this information. [5.11] What is token ring switching? From a functional point of view switching is exactly the same as bridging. However switches use specially designed hardware called Application Specific Integrated Circuits (ASICs) to perform the bridging and packet-forwarding functionality (as supposed to implementations using a central CPU and special software). Consequently, switches are much faster than ancient bridges. When you compare token-ring switches to multiport (token-ring) bridges in more detail you can find more differences. For example switches forward packets directly and at wire-speed from port x to port y. However ancient multiport bridges are often implemented using a internal token-ring segment. Consequently a packet being source-routed from port x to port y makes two (!) hops (from the segment attached to port x to the internal ring and from the internal ring to the segment attached to port y). Please note that there is a maximum on the number of hops a packet is allowed to make (8 or 16, don't remember) and that the maximum aggregate throughput of the multiport bridge is limited by the capacity of the internal ring. Other goodies token-ring switches often offer are support for virtual LAN's and full duplex connections. [5.12] What is the process for inserting into a ring? This information is derived from the TMS380 Second-Generation Token Ring User's Guide from Texas Instruments published in 1990. In order for any token ring adapter to insert successfully into a ring, the adapter must successfully complete 5 steps known as the phases of insertion. These phases are described as follows: Phase 0 - Media Lobe Check, Phase 1 - Physical Insertion, Phase 2 - Address Verification, Phase 3 - Participation in Ring Poll, and Phase 4 - Request Initialization. Phase 0: Media Lobe Check The first step for any token ring device initialization is known as the Lobe Media Check. This phase actually tests the transmitter and receiver of the adapter and the cable between the adapter and the Multistation Access Unit (MAU). A MAU physically wraps the connection cable's transmit wire back to its receive wire. The effect is that the adapter can transmit media test Media Access Control (MAC) frames up the cable to the MAU (where it is wrapped) and back to itself. The adapter will send lobe media test MAC frames to destination address 00-00-00-00-00-00 (with the source address of the adapter) and a Duplication Address Test (DAT) MAC frame (containing the address of the adapter as both the source and destination) up the cable during this phase. 2047 test MAC frames and 1 DAT frame must be successfully transmitted in order to complete phase 0. The adapter will only attempt this phase 2 times before reporting a failure. Phase 1: Physical Insertion In phase 1, the adapter attempts to open the relay on the MAU by sending a DC current (4.1-7.0 V for current less than 1mA or 3.5-7.0 V for current of 1-2 mA, in either case known as phantom since it is transparent to any signals being transmitted on the same wires) up the transmit wire pair. Once the phantom is applied and the relay on the MAU opens (hopefully), the adapter waits to see one of the following: an Active Monitor Present (AMP) MAC frame, a Standby Monitor Present (SMP) MAC frame, or a ring purge MAC frame. Any one of these frames indicates that there is an Active Monitor (AM) present on the ring, which indicates successful completion of phase 1. If an AM is not detected within 18 seconds, the adapter initiates the monitor contention process. The monitor contention process determines a new AM based on the highest address of those contending for AM status. Not all stations contend for AM every time contention is initiated. If contention is not completed within one second, the adapter fails to open. If the adapter becomes AM and initiates a purge and the purge process does not complete within one second, the adapter fails to open. If the adapter receives a beacon MAC frame or a remove station MAC frame, the adapter fails to open. Phase 2: Address Verification This phase is also referred to as the duplicate address test. This phase insures that the address of this adapter is unique to the local ring. Since token ring allows Locally Administered Addresses (LAAs), you could end up with two adapters with the same MAC address if this check was not done. The adapter sends out a series of DAT MAC frames like the ones used in phase 0. If there is no other adapter on the local ring with the same address as the adapter in phase 2, then it will receive all of its DAT frames back with the ARI (Address Recognized Indicator) and FCI (Frame Copied Indicator) bits set to zero. At this time, the adapter would enter phase 3. If the adapter in phase 2 receives 2 frames with either the ARI or FCI bits set to 1, then it de-inserts from the ring and reports a failure to open. If phase 2 does not complete within 18 seconds, the adapter reports a failure and de-inserts. Phase 3: Participation in Ring Poll. This process is where a station learns its upstream neighbor's address and informs its downstream neighbor of the inserting adapter's address. It is this process which creates a station list or ring map. The adapter must wait until it receives an AMP or SMP frame with the ARI/FCI bits set to zero. Upon receipt of an AMP or SMP frame with the ARI/FCI bits set to zero, the station flips both bits (ARI and FCI) to one (if enough resources are available) and queues an SMP frame for transmission. If no such frames are received within 18 seconds, the adapter reports a failure to open and de-inserts from the ring. If the adapter successfully participates in a ring poll, it proceeds into the final phase of insertion. Phase 4: Request Initialization The adapter sends four request initialization MAC frames to the functional address of the Ring Parameter Server (RPS). If there is no RPS present on the ring, the adapter uses its own default values and reports successful completion of the insertion process. If the adapter receives one of its four request initialization MAC frames back with the ARI/FCI bits set to one, it waits 2 seconds for a response. If there is no response, it re-transmits up to four times. At this time, if is no response, it reports a request initialization failure and de-inserts from the ring. [5.13] How do you troubleshoot the insertion process? Phase 0: Media Lobe Check Troubleshooting Failure to complete phase 0 is one of the most common failures when trying to configure a token ring network interface card into a PC. Most token ring adapters, upon failing, will display some cryptic error message like "Adapter failed to open." or "Failed initialization.". Always check the cable connected to the adapter and where it connects to the hub. In order for an adapter to pass phase 0, it must have a closed circuit to test. Either use a wrap plug or insure that the adapter is connected to a working MAU. Bad cabling causes many adapter problems during the insertion process. Things to look for include: "Is the adapter configured to use the correct media port, UTP or STP?", "Is the cable run from the adapter to the hub complete and correct?", "What exactly is between the adapter and the hub, how many punch downs, what kind of cable, how is it wired, where does it run, are there phones in the same cable, etc.?", and "What kind of media filter are you using?". Keep in mind that what will work at 4 Mbps will not always work at 16 Mbps. Phase 1: Physical Insertion Troubleshooting Many of the problems associated with phase 1 of insertion are the same ones accounted for in phase 0, especially bad cabling and bad media filters. The error messages at this stage are usually the same as those received during phase 0 and are just as cryptic. If the cabling checks out, look at the hub. Does the hub indicate insertion? Does the hub make a chattering noise when the adapter is trying to insert? Are there other stations on the ring? The problem could be cabling or a faulty adapter (not supplying consistent phantom can cause the relay to chatter). Some simple steps would be to move the station to a working location or try a known working station at this location. Can the station in question insert if the other stations are turned off? It could be that there is a physical layer problem (i.e. wiring, line noise, jitter, etc.) on the ring which shows up as more stations insert, causing purges and beaconing which will kick off a new inserting adapter. If you are sure that the cabling is acceptable, you will probably need a protocol analysis trace before making any prognosis as to why you can not insert. The analyzer should be the immediate upstream neighbor to the station trying to insert. A normal insertion that completes successfully commonly causes several token ring errors on the ring during phase 1. Common errors at this time would include burst errors, line errors, token errors, ring purges, and lost frame errors, due to the simple act of opening the relay. Do not assume that the existence of these errors indicate a problematic ring, as these are normal symptoms that occur during the insertion process. Phase 2: Address Verification Troubleshooting The only time you need to worry about this phase is when you are in an environment where the user is using LAAs. When users start entering LAAs, the chance of duplicate addresses goes up dramatically. The most common cause is copying a working adapter configuration files (config.sys, autoexec.bat, net.cfg, protocol.ini.) between stations. The symptom to look for is when the adapter is trying to insert, it will (under most circumstances) insert and de-insert twice in rapid succession and then quit trying. It will also provide messages such as "Adapter failed to initialize." or it might actually say "Failed Duplicate Address Test.". Change the LAA or move to another ring and try to reinsert. If you can get a trace of the failure to insert, you can look for the duplicate address test frames. As in phase 1, insert your analyzer directly upstream to the failing adapter. Phase 3: Participation in Ring Poll Troubleshooting Some probing is usually required to find out the root of the problem at this phase. If you can not insert, time how long it takes for an inserting adapter to fail. If the answer is 15-20 seconds, then it is probably failing the ring poll. If the answer is less than 15 seconds, the problem could still be the ring poll failure but more information will be required. If you get a trace of a ring that is failing the ring poll process, you will find a MAC frame issued by the AM called Neighbor Notification Incomplete (NNI) or Ring Poll Failure. This frame should be issued every 7 seconds in a failing ring just prior to an AMP MAC frame. The NNI frame is important because it will contain the address of the last station to successfully complete the ring poll process. The downstream neighbor from this station is usually the culprit and removing the downstream neighbor should cure the problem. Exceptions will occur if there is more than one station that is not participating in the ring poll process. Another way to cure the problem is to have all stations on the ring power down for 30 seconds (at the same time) and then try to reinsert, however, this is only a temporary cure and not a fix since the problem will likely reappear. If the failure is proven to be a ring poll failure and the problem persists, the customer may need to look at contacting the vender of the failing adapter(s) or device(s) and see if the vender has a newer driver available. Phase 4: Request Initialization Troubleshooting Failure at this stage is rare but could point to a failing adapter on either the RPS or on the inserting station, a physical layer problem on the ring (cabling, jitter, etc.), or some other `undocumented' feature of the environment in which the failure occurs. The only method to determine a failure at this stage is to use an analyzer inserted as the upstream neighbor to the adapter in question. An RPS is generally best serviced by bridges or routers since they are usually running the server software required to perform these services. 6.0 Token Ring Errors and Troubleshooting [6.1] What are isolating and non-isolating errors? An isolating error can be attributable to a specific station on the ring. Non-isolating errors are usually reported by the Active Monitor, and cannot be attributed to a specific station. [6.2] What is the claim process? This is when a the ring elects a new Active Monitor. It is also called the monitor contention process. Election of a new active monitor occurs due to one of the following events: 1. An active or standby monitor detects a loss of signal. 2. A station attaching to a ring does not detect an active monitor (this can happen for 1st station on the ring). 3. A station's receive-notification timer expires. 4. A active monitor's ring purge timer expires. 5. A standby monitor's good_token timer expires (no management frames from active monitor detected). Once one of these conditions occurs, the ring station(s) go/goes into Claim-Token-Transmit mode by broadcasting Claim Token MAC frames. The station with the highest MAC address becomes active monitor. [6.3] What is a beacon frame? A beacon frame is sent generated by a station or stations that do not detect a receive signal. A station or stations will broadcast these beacon MAC frames with the until the receive signal is restored. A beacon MAC frame indicates the station's nearest active upstream neighbor (NAUN). [6.4] What is promiscuous mode? Promiscuous mode is used with protocol analysis or network management software that allows visibility to all data traversing the ring. Not all token ring adapters support promiscuous mode, and special drivers and/or configurations are required for using an adapter card in promiscuous mode. [6.5] What non-commercial software is available to monitor a token ring network? A list of commercial, shareware, and freeware software is available at: http://www.NetworkUptime.com/tools 7.0 Other Information [7.1] What token ring books are available? The Certified Network Expert (CNX) consortium described in section [7.2] has an excellent list of token-ring books. This list is designed for the network professional who is studying for the CNX certification, and is a very comprehensive list of technical publications. This CNX reading list can be found at: http://www.cnx.org/reading.htm An updated CNX study library can also be found on NetworkUptime.com: http://www.NetworkUptime.com/cnx/ [7.2] What certifications are available regarding token ring networks? A token ring-specific certification is available through the Certified Network eXpert (CNX) program. This certification is token ring topology specific, and does not emphasize any network operating system. Visit http://www.cnx.org for more information on the CNX exam. Sylvan Prometric administers the CNX exam, and their web page is http://www.sylvanprometric.com. NetworkUptime.com also keeps a CNX resources page at http://www.NetworkUptime.com/cnx. [7.3] What companies make token ring adapter cards and MAUs? Andrews Attachmate (formerly DCA) <http://www.attachmate.com> Black Box <http://www.blackbox.com> Cabletron <http://www.cabletron.com> Compaq (formerly Thomas Conrad) <http://www.compaq.com> D-Link <http://www.dlink.com> IBM <http://www.ibm.com> Intel <http://www.intel.com> Kingston <http://www.kingston.com> Madge <http://www.madge.com> NDC <http://www.ndclan.com> Proteon <http://www.proteon.com> Racore <http://www.racore.com> Relia Technologies Olicom <http://www.olicom.com> Silcom Sim Ware Technologies / Wiremold Communications <http://www.wiremold.com> SMC <http://www.smc.com> 3Com <http://www.3com.com> Unicom <http://www.unicomlink.com> Xircom <http://www.xircom.com> --- End of comp.dcom.lans.token-ring FAQ ---