home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
rtsi.com
/
2014.01.www.rtsi.com.tar
/
www.rtsi.com
/
OS9
/
OSK
/
TELECOM
/
UUCPBB21
/
readme.uucpbb
next >
Wrap
Text File
|
2009-11-06
|
2KB
|
62 lines
UUCPbb v2.1 is an update the OS-9 UUCP package UUCPbb v2.0. UUCPbb is an
update of Rick Adams' original OS-9 UUCP.
Due to differences in compression between the OS-9/68K and OS-9/6809 version
of LHA, we have decided to use the lowest common denominator for archiving.
Since OS-9/6809 LHA 2.11b and OS-9/68K LHA 2.01 generate compatible archive
files, these are the archivers that were used for this package. For this
reason, OS-9/68K should use LHA 2.01 dearchive these files.
All the archives were created with LHA 2.11b. To burst the archives under
OS-9/6809 you will either need LHA211 or UNLZH7. Both are available on
chestnut.cs.wisc.edu and Delphi.
This program will compile and run under OS-9/6809 Level 2 on the Tandy Color
Computer 3 and OS-9/68K (OSK). It runs on a 512K CoCo. It will probably run
run a 128K, but I have not tested this. It has been tested on the MM/1 and
System IV & V. It has not (yet :-) been compiled under OS-9000.
I am reasonably sure I have squished most of the bugs in v2.0 which were
reported to me . If I missed any, let me know.
v2.1 is distributed as 5 individual files.
You need the following files in order to compile and run this software:
uucpbb21.lzh -the source code
uub21doc.lzh -documentation and miscellaneous files
Not required but a good idea for OS-9/6809:
clib1990.lzh -this is the 1990 edition of Carl Kreider's CLIB
cc250.lzh -latest replacement of Carl Kreider's C compiler executive
The package is also now available in an "add water and stir" form for both
the CoCo and OSK. Unfortunately, these executable files are rather large.
There is no real way to crunch them down significantly.
The CoCo executables were compiled both with and without termcap support. The
OSK execuatables were compiled only with termcap support.
For OSK you need the file:
uub21osk.lzh -executable modules for OS-9/68K
For the CoCo, you can choose between two files:
uub21os91.lzh -executable modules for OS-9/6809 with a 6809
uub21os92.lzh -executable modules for OS-9/6809 with a 6309
If you opt for the executable files, you will also need the docs archive.
Starting with this version UUCPbb is now completely user configurable. The
only hard-coded directory is /DD/SYS/UUCP.
Have fun
Bob Billson <bob@kc2wz.bubble.org>
1994 Sept 30