home *** CD-ROM | disk | FTP | other *** search
/ host-198-236-40-254.wlwv.k12.or.us / host-198-236-40-254.wlwv.k12.or.us.tar / host-198-236-40-254.wlwv.k12.or.us / tsa / coefs / TrGr007.txt < prev    next >
Text File  |  2014-07-10  |  713b  |  21 lines
  1. # These are the initialization values for the SI3050 that are used
  2. # for USA per SiLabs defaults for ring validation
  3. # We support ring type B; which says we should recognize between 15.3 and
  4. # 68 Hz
  5. # this is a placeholder file until further international requirements arise
  6. # 4/26/05 RSS Enable 200Hz Highpass filter
  7. TX_GAIN_CTRL2    =    0            # .5 db gain
  8. TX_GAIN_CTRL3    =    5
  9. RX_GAIN_CTRL2    =    1            # 1.5 db gain
  10. RX_GAIN_CTRL3    =    5
  11. INT_CTRL1        =    0
  12. INT_CTRL2        =    0
  13. DAA_CTRL5        =    a2            # FULL, FOH = 128 ms, enable 200Hz Highpass filter
  14. RING_VAL_CTRL1    =    16
  15. RING_VAL_CTRL2    =    2d            # RDY = 0, RTO = 640 ms , RCC = 512 ms
  16. RING_VAL_CTRL3    =    99
  17. DC_TERM            =    c0            # DVC = 3.5V
  18. ACTERM            =    0            # 600 Ohm termination
  19. END
  20.  
  21.