10045 Depending on the document, one "Gaphics Mode" may print faster than the other. "Send Graphics as Vector" may produce higher quality graphics, whereas "Send Graphics as Raster" may improve printing speed.
10047 The High Capacity Input accessory is an additional input source that is installed under your printer. Select the accessory you have installed or select "Not Installed".
10053 This setting must be set to match the current mailbox mode of the printer. The printer's "Mailbox Mode" can be set from the control panel or through a hp printer utility. This can only be selected if a mailbox-capable "Output Bin" is installed.
10054 When printing more than one "Pages per Sheet", select the order and the placement of the pages here.
10055 "Gloss Print Finish" applies a glossy finish to documents that are printed on non-glossy paper. The Gloss Print Finish feature also improves print quality when you are printing on rough or heavy media.
10056 0@0<5B@ "@C:C20B8 C 2V4BV=:0E AV@>3>" 4>72>;OT 4@C:C20B8 4>:C<5=B C 2V4BV=:0E AV@>3>.
10057 The "Color Treatment" settings allow you to choose the way color settings are controled: either through "hp Automatic Color Settings" or manually.
10058 A manual color option that controls the type of color produced by the printer.
10062 For the most reliable printing, set "Scale Patterns" to True. Change this option if you are getting unexpected results with printed fills and patterns.
10112 Make Job Private/Secure enables a layer of access control for Job Storage.\nPIN to print requires the user to enter a 4-digit numerical PIN at the device to retrieve/delete the print job.\nEncrypt Job (with password) sends encrypted print data to the device and a password must be entered to retrieve/delete the print job.When Job Storage Mode is locked,the Pin to print or Encrypt Job setting is also locked.The None setting is always unlocked.
10113 "Job Storage" allows print jobs to be stored on the printer s hard disk and retrieved/deleted from the control panel of the device.\nThe Lock selection prevents the user from changing this setting in the driver.