Info: 'WARNING: This is the startup partition. If you delete it, it will not be possible to boot from the drive until another partition is set to be the startup.'
DITL_1031_Enter Drive Type.txt
Items: (6 entries)
0:
Bounds: x1=96, y1=176, x2=156, y2=196
Type: 4
Info: 'OK'
1:
Bounds: x1=92, y1=172, x2=160, y2=200
Type: -128
Info: ''
2:
Bounds: x1=12, y1=8, x2=244, y2=72
Type: -120
Info: '"^0" is currently of an undefined type. Please indicate what type of GCC hard disk it is:'
3:
Bounds: x1=56, y1=136, x2=124, y2=152
Type: 6
Info: 'FX or FI'
4:
Bounds: x1=56, y1=112, x2=196, y2=128
Type: 6
Info: 'UltraDrive internal'
5:
Bounds: x1=56, y1=88, x2=200, y2=104
Type: 6
Info: 'UltraDrive external'
DITL_1030_PSW drive old.txt
Items: (5 entries)
0:
Bounds: x1=32, y1=80, x2=92, y2=100
Type: 4
Info: 'OK'
1:
Bounds: x1=28, y1=76, x2=96, y2=104
Type: -128
Info: ''
2:
Bounds: x1=136, y1=80, x2=196, y2=100
Type: 4
Info: 'Cancel'
3:
Bounds: x1=20, y1=44, x2=212, y2=64
Type: 16
Info: ''
4:
Bounds: x1=20, y1=4, x2=204, y2=36
Type: -120
Info: 'Enter the password for this drive:'
DITL_1026_Catalog.txt
Items: (6 entries)
0:
Bounds: x1=88, y1=268, x2=148, y2=288
Type: 4
Info: 'Done'
1:
Bounds: x1=84, y1=264, x2=152, y2=292
Type: -128
Info: ''
2:
Bounds: x1=12, y1=68, x2=224, y2=250
Type: 0
Info: ''
3:
Bounds: x1=232, y1=8, x2=480, y2=292
Type: 0
Info: ''
4:
Bounds: x1=12, y1=12, x2=52, y2=60
Type: -64
Info: 'P'
5:
Bounds: x1=56, y1=28, x2=171, y2=46
Type: -64
Info: 'R'
DITL_1025_Tools Help.txt
Items: (7 entries)
0:
Bounds: x1=60, y1=252, x2=120, y2=272
Type: 4
Info: 'Done'
1:
Bounds: x1=56, y1=248, x2=124, y2=276
Type: -128
Info: ''
2:
Bounds: x1=13, y1=79, x2=164, y2=231
Type: 0
Info: ''
3:
Bounds: x1=172, y1=76, x2=420, y2=276
Type: 0
Info: ''
4:
Bounds: x1=12, y1=12, x2=52, y2=60
Type: -64
Info: 'P'
5:
Bounds: x1=52, y1=28, x2=88, y2=47
Type: -64
Info: 'M'
6:
Bounds: x1=188, y1=7, x2=402, y2=69
Type: -64
Info: 'C'
DITL_1024_PSW alrtNew.txt
Items: (3 entries)
0:
Bounds: x1=84, y1=76, x2=144, y2=96
Type: 4
Info: 'OK'
1:
Bounds: x1=80, y1=72, x2=148, y2=100
Type: -128
Info: ''
2:
Bounds: x1=8, y1=4, x2=215, y2=62
Type: 8
Info: 'The two passwords do not agree. The old password has been left unchanged.'
DITL_1023_PSW alrtOld.txt
Items: (3 entries)
0:
Bounds: x1=84, y1=76, x2=144, y2=96
Type: 4
Info: 'OK'
1:
Bounds: x1=80, y1=72, x2=148, y2=100
Type: -128
Info: ''
2:
Bounds: x1=4, y1=0, x2=221, y2=67
Type: -120
Info: ''
DITL_1022_PSW new2.txt
Items: (5 entries)
0:
Bounds: x1=28, y1=76, x2=88, y2=96
Type: 4
Info: 'OK'
1:
Bounds: x1=24, y1=72, x2=92, y2=100
Type: -128
Info: ''
2:
Bounds: x1=140, y1=76, x2=200, y2=96
Type: 4
Info: 'Cancel'
3:
Bounds: x1=16, y1=44, x2=208, y2=64
Type: 16
Info: ''
4:
Bounds: x1=16, y1=4, x2=207, y2=38
Type: -120
Info: 'Please re-enter the new password:'
DITL_1021_PSW new.txt
Items: (5 entries)
0:
Bounds: x1=28, y1=76, x2=88, y2=96
Type: 4
Info: 'OK'
1:
Bounds: x1=24, y1=72, x2=92, y2=100
Type: -128
Info: ''
2:
Bounds: x1=140, y1=76, x2=200, y2=96
Type: 4
Info: 'Cancel'
3:
Bounds: x1=16, y1=44, x2=208, y2=64
Type: 16
Info: ''
4:
Bounds: x1=16, y1=4, x2=188, y2=20
Type: -120
Info: 'Enter the new password:'
DITL_1020_PSW old.txt
Items: (5 entries)
0:
Bounds: x1=28, y1=76, x2=88, y2=96
Type: 4
Info: 'OK'
1:
Bounds: x1=24, y1=72, x2=92, y2=100
Type: -128
Info: ''
2:
Bounds: x1=140, y1=76, x2=200, y2=96
Type: 4
Info: 'Cancel'
3:
Bounds: x1=16, y1=44, x2=208, y2=64
Type: 16
Info: ''
4:
Bounds: x1=16, y1=4, x2=207, y2=38
Type: -120
Info: 'Enter the password for this partition:'
DITL_1009_compact confirm.txt
Items: (5 entries)
0:
Bounds: x1=32, y1=108, x2=104, y2=128
Type: 4
Info: 'Proceed'
1:
Bounds: x1=28, y1=104, x2=108, y2=132
Type: -128
Info: ''
2:
Bounds: x1=216, y1=108, x2=288, y2=128
Type: 4
Info: 'Cancel'
3:
Bounds: x1=8, y1=8, x2=312, y2=56
Type: -120
Info: 'Note: Creating a partition larger than ^0 megabytes will require reorganizing the existing data on the hard disk.'
4:
Bounds: x1=8, y1=60, x2=312, y2=92
Type: -120
Info: 'This operation will take several minutes. Do you want to proceed?'
DITL_1008_part delete confirm.txt
Items: (4 entries)
0:
Bounds: x1=132, y1=76, x2=204, y2=96
Type: 4
Info: 'Cancel'
1:
Bounds: x1=128, y1=72, x2=208, y2=100
Type: -128
Info: ''
2:
Bounds: x1=20, y1=76, x2=92, y2=96
Type: 4
Info: 'Delete'
3:
Bounds: x1=4, y1=8, x2=216, y2=44
Type: -120
Info: 'WARNING: Deleting will destroy all files on the partition.'
DITL_1007_part erase confirm.txt
Items: (4 entries)
0:
Bounds: x1=128, y1=76, x2=200, y2=96
Type: 4
Info: 'Cancel'
1:
Bounds: x1=124, y1=72, x2=204, y2=100
Type: -128
Info: ''
2:
Bounds: x1=20, y1=76, x2=92, y2=96
Type: 4
Info: 'Erase'
3:
Bounds: x1=8, y1=8, x2=217, y2=51
Type: -120
Info: 'WARNING: Erasing will destroy all files on the partition.'
DITL_1006_Generic Error.txt
Items: (5 entries)
0:
Bounds: x1=136, y1=76, x2=196, y2=96
Type: 4
Info: 'OK'
1:
Bounds: x1=132, y1=72, x2=200, y2=100
Type: -128
Info: ''
2:
Bounds: x1=14, y1=10, x2=46, y2=42
Type: -96
Info: ' '
3:
Bounds: x1=8, y1=48, x2=60, y2=65
Type: -120
Info: '-10552'
4:
Bounds: x1=60, y1=4, x2=324, y2=71
Type: -120
Info: ''
DITL_1005_Fmt Cnfrm.txt
Items: (9 entries)
0:
Bounds: x1=172, y1=152, x2=244, y2=172
Type: 4
Info: 'Cancel'
1:
Bounds: x1=168, y1=148, x2=248, y2=176
Type: -128
Info: ''
2:
Bounds: x1=48, y1=152, x2=120, y2=172
Type: 4
Info: 'Format'
3:
Bounds: x1=12, y1=8, x2=44, y2=40
Type: -128
Info: ''
4:
Bounds: x1=64, y1=88, x2=279, y2=104
Type: 16
Info: 'Untitled'
5:
Bounds: x1=32, y1=120, x2=128, y2=136
Type: 6
Info: 'Partitioned'
6:
Bounds: x1=152, y1=120, x2=264, y2=136
Type: 6
Info: 'Single-Volume'
7:
Bounds: x1=64, y1=8, x2=284, y2=40
Type: -120
Info: 'WARNING: Formatting will cause all files and partitions to be lost.'
8:
Bounds: x1=64, y1=64, x2=220, y2=80
Type: -120
Info: 'Please name this drive:'
DITL_1004_Init Cnfrm.txt
Items: (9 entries)
0:
Bounds: x1=188, y1=152, x2=260, y2=172
Type: 4
Info: 'Cancel'
1:
Bounds: x1=184, y1=148, x2=264, y2=176
Type: -128
Info: ''
2:
Bounds: x1=48, y1=152, x2=120, y2=172
Type: 4
Info: 'Initialize'
3:
Bounds: x1=12, y1=12, x2=44, y2=44
Type: -128
Info: ''
4:
Bounds: x1=64, y1=88, x2=279, y2=104
Type: 16
Info: 'Untitled'
5:
Bounds: x1=32, y1=120, x2=128, y2=136
Type: 6
Info: 'Partitioned'
6:
Bounds: x1=164, y1=120, x2=276, y2=136
Type: 6
Info: 'Single-Volume'
7:
Bounds: x1=64, y1=12, x2=296, y2=44
Type: -120
Info: 'WARNING: Initialization will cause all files and partitions to be lost.'
8:
Bounds: x1=64, y1=64, x2=220, y2=80
Type: -120
Info: 'Please name this drive:'
DITL_1003_Options.txt
Items: (11 entries)
0:
Bounds: x1=240, y1=144, x2=328, y2=164
Type: 4
Info: 'OK'
1:
Bounds: x1=236, y1=140, x2=332, y2=168
Type: -128
Info: ''
2:
Bounds: x1=240, y1=112, x2=328, y2=132
Type: 4
Info: 'Cancel'
3:
Bounds: x1=240, y1=72, x2=328, y2=92
Type: 4
Info: 'Help…'
4:
Bounds: x1=240, y1=32, x2=328, y2=52
Type: 4
Info: 'Password…'
5:
Bounds: x1=8, y1=40, x2=152, y2=56
Type: 5
Info: 'Lock partition'
6:
Bounds: x1=8, y1=72, x2=232, y2=88
Type: 5
Info: 'Mount partition automatically'
7:
Bounds: x1=8, y1=120, x2=232, y2=136
Type: 5
Info: 'Startup from this partition'
8:
Bounds: x1=620, y1=0, x2=824, y2=16
Type: 5
Info: ' at startup'
9:
Bounds: x1=8, y1=8, x2=328, y2=24
Type: 8
Info: '^1 Partition Options'
10:
Bounds: x1=46, y1=135, x2=227, y2=189
Type: 8
Info: '(instead of from “^0”)'
DITL_1002_Help.txt
Items: (6 entries)
0:
Bounds: x1=60, y1=252, x2=120, y2=272
Type: 4
Info: 'Done'
1:
Bounds: x1=56, y1=248, x2=124, y2=276
Type: -128
Info: ''
2:
Bounds: x1=12, y1=80, x2=163, y2=232
Type: 0
Info: ''
3:
Bounds: x1=171, y1=6, x2=417, y2=277
Type: 0
Info: ''
4:
Bounds: x1=12, y1=12, x2=52, y2=60
Type: -64
Info: 'P'
5:
Bounds: x1=56, y1=28, x2=92, y2=47
Type: -64
Info: 'M'
DITL_1001_Partitions.txt
Items: (15 entries)
0:
Bounds: x1=52, y1=112, x2=132, y2=132
Type: 4
Info: 'Done'
1:
Bounds: x1=48, y1=108, x2=136, y2=136
Type: -128
Info: ''
2:
Bounds: x1=52, y1=80, x2=132, y2=100
Type: 4
Info: 'Help...'
3:
Bounds: x1=208, y1=176, x2=292, y2=196
Type: 4
Info: 'Mount'
4:
Bounds: x1=208, y1=208, x2=292, y2=228
Type: 4
Info: 'Create…'
5:
Bounds: x1=208, y1=240, x2=292, y2=260
Type: 4
Info: 'Options…'
6:
Bounds: x1=324, y1=176, x2=408, y2=196
Type: 4
Info: 'Unmount'
7:
Bounds: x1=324, y1=208, x2=408, y2=228
Type: 4
Info: 'Delete…'
8:
Bounds: x1=324, y1=240, x2=408, y2=260
Type: 4
Info: 'Erase…'
9:
Bounds: x1=284, y1=4, x2=316, y2=36
Type: -128
Info: ''
10:
Bounds: x1=240, y1=36, x2=362, y2=50
Type: -128
Info: ''
11:
Bounds: x1=184, y1=60, x2=427, y2=162
Type: 0
Info: ''
12:
Bounds: x1=8, y1=152, x2=180, y2=264
Type: -128
Info: ''
13:
Bounds: x1=12, y1=8, x2=52, y2=56
Type: -64
Info: 'P'
14:
Bounds: x1=56, y1=24, x2=126, y2=43
Type: -64
Info: 'N'
DITL_1000_Create Part..txt
Items: (15 entries)
0:
Bounds: x1=68, y1=84, x2=148, y2=104
Type: 4
Info: 'Create…'
1:
Bounds: x1=64, y1=80, x2=152, y2=108
Type: -128
Info: ''
2:
Bounds: x1=68, y1=116, x2=148, y2=136
Type: 4
Info: 'Done'
3:
Bounds: x1=8, y1=156, x2=208, y2=256
Type: 0
Info: ''
4:
Bounds: x1=312, y1=6, x2=344, y2=38
Type: -128
Info: ''
5:
Bounds: x1=232, y1=68, x2=427, y2=84
Type: 16
Info: 'Untitled'
6:
Bounds: x1=360, y1=100, x2=400, y2=116
Type: 16
Info: ''
7:
Bounds: x1=232, y1=124, x2=430, y2=140
Type: 0
Info: ''
8:
Bounds: x1=230, y1=167, x2=428, y2=245
Type: 0
Info: ''
9:
Bounds: x1=12, y1=8, x2=52, y2=56
Type: -64
Info: 'P'
10:
Bounds: x1=56, y1=16, x2=119, y2=54
Type: -64
Info: 'L'
11:
Bounds: x1=232, y1=44, x2=389, y2=61
Type: -120
Info: 'Name of new partition:'
12:
Bounds: x1=232, y1=100, x2=344, y2=116
Type: -120
Info: 'Size of partition:'
13:
Bounds: x1=408, y1=100, x2=432, y2=116
Type: -120
Info: 'MB'
14:
Bounds: x1=232, y1=148, x2=348, y2=164
Type: -120
Info: 'Type of partition:'
DITL_600.txt
Items: (1 entries)
0:
Bounds: x1=-4, y1=-4, x2=438, y2=213
Type: -64
Info: 'X'
DITL_541_Copy of cantinitdef.txt
Items: (2 entries)
0:
Bounds: x1=108, y1=56, x2=168, y2=76
Type: 4
Info: 'OK'
1:
Bounds: x1=68, y1=8, x2=252, y2=40
Type: -120
Info: 'Can't eject the volume that DriveManager is on.'
DITL_540_Copy of CantInit.txt
Items: (2 entries)
0:
Bounds: x1=118, y1=44, x2=182, y2=64
Type: 4
Info: 'Cancel'
1:
Bounds: x1=68, y1=8, x2=280, y2=24
Type: -120
Info: 'Can't eject the startup volume.'
DITL_539_Media Damage.txt
Items: (2 entries)
0:
Bounds: x1=109, y1=96, x2=222, y2=116
Type: 4
Info: 'Acknowledged'
1:
Bounds: x1=73, y1=5, x2=325, y2=91
Type: -120
Info: 'Your hard disk "^0" required minor repairs, but is now reliable. You may need to restore some applications or documents from backups.'
DITL_538_CantFixID.txt
Items: (2 entries)
0:
Bounds: x1=135, y1=93, x2=199, y2=113
Type: 4
Info: 'OK'
1:
Bounds: x1=69, y1=4, x2=331, y2=83
Type: -120
Info: 'The hard disk "^0" still has a serious problem. Service from your dealer may be required.'
DITL_537_NoMemoryID.txt
Items: (2 entries)
0:
Bounds: x1=135, y1=73, x2=199, y2=93
Type: 4
Info: 'OK'
1:
Bounds: x1=69, y1=4, x2=326, y2=69
Type: -120
Info: 'There is currently not enough memory to perform a disk test. '
DITL_536_CantSetID.txt
Items: (2 entries)
0:
Bounds: x1=135, y1=92, x2=199, y2=112
Type: 4
Info: 'OK'
1:
Bounds: x1=69, y1=4, x2=326, y2=87
Type: -120
Info: 'The SCSI priority of the hard disk "^0" could not be changed due to an error. Please try again.'
DITL_534_BadDrvrID.txt
Items: (2 entries)
0:
Bounds: x1=135, y1=92, x2=199, y2=112
Type: 4
Info: 'OK'
1:
Bounds: x1=69, y1=4, x2=320, y2=88
Type: -120
Info: 'Something seems to be wrong with the driver software used by "^0". Please quit and rerun DriveManager.'
DITL_533_BadSumID.txt
Items: (2 entries)
0:
Bounds: x1=136, y1=64, x2=200, y2=84
Type: 4
Info: 'OK'
1:
Bounds: x1=69, y1=6, x2=320, y2=51
Type: -120
Info: 'This copy of DriveManager is damaged. (sum = ^0)'
DITL_532_CantSetID.txt
Items: (2 entries)
0:
Bounds: x1=135, y1=94, x2=199, y2=114
Type: 4
Info: 'OK'
1:
Bounds: x1=69, y1=4, x2=314, y2=82
Type: -120
Info: 'The SCSI priority of this GCC hard disk is set by the selection switch on the back panel or internal mounting bracket. See your manual for details.'
DITL_529_verifyerror.txt
Items: (2 entries)
0:
Bounds: x1=114, y1=52, x2=174, y2=72
Type: 4
Info: 'OK'
1:
Bounds: x1=68, y1=4, x2=272, y2=36
Type: -120
Info: 'A verify error occurred during the disk test.'
DITL_528_cantgetinfo.txt
Items: (2 entries)
0:
Bounds: x1=135, y1=75, x2=199, y2=95
Type: 4
Info: 'OK'
1:
Bounds: x1=62, y1=1, x2=323, y2=66
Type: -120
Info: 'An error occurred while reading in information about your hard disk. Please try again.'
DITL_526_cantvfymgr.txt
Items: (2 entries)
0:
Bounds: x1=135, y1=75, x2=199, y2=95
Type: 4
Info: 'OK'
1:
Bounds: x1=62, y1=2, x2=323, y2=67
Type: -120
Info: 'An error occurred while verifying DriveManager. Please try using a fresh copy. '
DITL_524_cantinitbusy.txt
Items: (2 entries)
0:
Bounds: x1=135, y1=95, x2=199, y2=115
Type: 4
Info: 'OK'
1:
Bounds: x1=62, y1=2, x2=327, y2=87
Type: -120
Info: 'You cannot initialize or format the hard disk "^0" until all open files have been closed. Some files may be invisible. '
DITL_522_cantchbusy.txt
Items: (2 entries)
0:
Bounds: x1=135, y1=95, x2=199, y2=115
Type: 4
Info: 'OK'
1:
Bounds: x1=67, y1=2, x2=330, y2=87
Type: -120
Info: 'You cannot change the SCSI priority of the hard disk "^0" until all open files have been closed. Some files may be invisible.'
DITL_521_MgrChanged.txt
Items: (2 entries)
0:
Bounds: x1=132, y1=72, x2=192, y2=92
Type: 4
Info: 'OK'
1:
Bounds: x1=68, y1=4, x2=304, y2=52
Type: -120
Info: 'The DriveManager appears to be damaged. Use your backup copy or get a new copy from your dealer.'
DITL_519_cantinitdef.txt
Items: (2 entries)
0:
Bounds: x1=118, y1=60, x2=178, y2=80
Type: 4
Info: 'OK'
1:
Bounds: x1=68, y1=8, x2=276, y2=40
Type: -120
Info: 'Can't initialize the volume that DriveManager is on.'
DITL_518_Failed.txt
Items: (2 entries)
0:
Bounds: x1=105, y1=95, x2=218, y2=115
Type: 4
Info: 'Acknowledged'
1:
Bounds: x1=72, y1=4, x2=324, y2=90
Type: -120
Info: 'Your hard disk "^0" has failed the disk test. Back up all of your files immediately and contact your dealer.'
DITL_517_Passed.txt
Items: (3 entries)
0:
Bounds: x1=223, y1=145, x2=287, y2=165
Type: 4
Info: 'OK'
1:
Bounds: x1=178, y1=10, x2=342, y2=107
Type: -120
Info: 'Your GCC hard disk "^0" has passed the test. It is in fine working order.'
2:
Bounds: x1=13, y1=10, x2=164, y2=191
Type: -64
Info: ''
DITL_516_MacMinus.txt
Items: (2 entries)
0:
Bounds: x1=114, y1=56, x2=186, y2=76
Type: 4
Info: 'Quit'
1:
Bounds: x1=72, y1=4, x2=280, y2=36
Type: -120
Info: 'DriveManager cannot be used on a Macintosh 128, 512, or XL.'
DITL_515_CantInit.txt
Items: (2 entries)
0:
Bounds: x1=132, y1=44, x2=196, y2=64
Type: 4
Info: 'Cancel'
1:
Bounds: x1=68, y1=8, x2=304, y2=24
Type: -120
Info: 'Can't Initialize the startup volume.'
DITL_513_rev.txt
Items: (2 entries)
0:
Bounds: x1=140, y1=84, x2=204, y2=104
Type: 4
Info: 'OK'
1:
Bounds: x1=64, y1=4, x2=325, y2=69
Type: -120
Info: 'You cannot change the SCSI priority on the Startup disk or the disk from which DriveManager is running. Try running DriveManager from a floppy.'
DITL_512_nodisk.txt
Items: (2 entries)
0:
Bounds: x1=108, y1=52, x2=172, y2=72
Type: 4
Info: 'OK'
1:
Bounds: x1=64, y1=4, x2=264, y2=36
Type: -120
Info: 'The DriveManager cannot find any GCC hard disks.'
DITL_300.txt
Items: (8 entries)
0:
Bounds: x1=224, y1=188, x2=340, y2=208
Type: 4
Info: 'Partition...'
1:
Bounds: x1=224, y1=220, x2=340, y2=240
Type: 4
Info: 'Initialize...'
2:
Bounds: x1=224, y1=252, x2=340, y2=272
Type: 4
Info: 'Eject'
3:
Bounds: x1=360, y1=188, x2=476, y2=208
Type: 4
Info: 'Password...'
4:
Bounds: x1=360, y1=220, x2=476, y2=240
Type: 4
Info: 'Interleave...'
5:
Bounds: x1=360, y1=252, x2=476, y2=272
Type: 4
Info: 'Test'
6:
Bounds: x1=8, y1=180, x2=208, y2=280
Type: -128
Info: ''
7:
Bounds: x1=80, y1=82, x2=492, y2=145
Type: -128
Info: ''
DITL_297_shutoff.txt
Items: (1 entries)
0:
Bounds: x1=62, y1=14, x2=274, y2=30
Type: -120
Info: 'Please turn off your Macintosh.'
DITL_296_NeedShutdownID.txt
Items: (6 entries)
0:
Bounds: x1=68, y1=164, x2=128, y2=184
Type: 4
Info: 'OK'
1:
Bounds: x1=64, y1=160, x2=132, y2=188
Type: -128
Info: ''
2:
Bounds: x1=204, y1=164, x2=264, y2=184
Type: 4
Info: 'Cancel'
3:
Bounds: x1=12, y1=12, x2=44, y2=44
Type: -128
Info: ''
4:
Bounds: x1=64, y1=8, x2=314, y2=72
Type: -120
Info: 'You must shut down your Macintosh in order to change the SCSI priority of the hard disk "^0".'
5:
Bounds: x1=64, y1=84, x2=314, y2=153
Type: -120
Info: 'If "^0" is an external hard disk, you must turn it off and then on again. Do you want to proceed?'
DITL_295_NeedRebootID.txt
Items: (5 entries)
0:
Bounds: x1=68, y1=100, x2=128, y2=120
Type: 4
Info: 'OK'
1:
Bounds: x1=64, y1=96, x2=132, y2=124
Type: -128
Info: ''
2:
Bounds: x1=204, y1=100, x2=264, y2=120
Type: 4
Info: 'Cancel'
3:
Bounds: x1=12, y1=12, x2=44, y2=44
Type: -128
Info: ''
4:
Bounds: x1=64, y1=12, x2=320, y2=92
Type: -120
Info: 'You must reboot your Macintosh in order to change the SCSI priority of the hard disk "^0". Do you want to proceed?'
DITL_294_Credits.txt
Items: (8 entries)
0:
Bounds: x1=176, y1=256, x2=236, y2=276
Type: 4
Info: 'OK'
1:
Bounds: x1=172, y1=252, x2=240, y2=280
Type: -128
Info: ''
2:
Bounds: x1=62, y1=9, x2=80, y2=29
Type: -64
Info: ' Ä'
3:
Bounds: x1=92, y1=12, x2=348, y2=28
Type: -120
Info: 'GCC Technologies Family of Disk Drives'
4:
Bounds: x1=20, y1=60, x2=104, y2=76
Type: -120
Info: 'Designed by:'
5:
Bounds: x1=36, y1=84, x2=388, y2=116
Type: -120
Info: 'Tim Chase, Michael Fryar, Eli Fuchs, Armik Ghazarian, Dan Herr, Dave Hill, Robert Munafo, and Laird Popkin.'
6:
Bounds: x1=20, y1=136, x2=252, y2=152
Type: -120
Info: 'Who couldn't have done it without:'
7:
Bounds: x1=36, y1=160, x2=392, y2=239
Type: -120
Info: 'Ken Bradshaw, Brett Buatti, Emily Caner, Larry Concannon, Roger Fredette, Lisa Gade, Bill Getchell, Juliette Hartel, Ted Hauser, John Kelley, John Liddard, Ruth Morris, Kayla Ship, Paul Summermatter, Kathy Warner, and Scott Wilcox.'
DITL_292_CantSetILeave.txt
Items: (4 entries)
0:
Bounds: x1=136, y1=100, x2=196, y2=120
Type: 4
Info: 'OK'
1:
Bounds: x1=132, y1=96, x2=200, y2=124
Type: -128
Info: ''
2:
Bounds: x1=12, y1=8, x2=129, y2=74
Type: -64
Info: '$'
3:
Bounds: x1=136, y1=4, x2=324, y2=84
Type: -120
Info: 'The interleave of the GCC hard disk "^0" is always 1 for all Macintosh systems.'
DITL_291_NoSetSESCSIID.txt
Items: (20 entries)
0:
Bounds: x1=200, y1=272, x2=260, y2=292
Type: 4
Info: 'OK'
1:
Bounds: x1=196, y1=268, x2=264, y2=296
Type: 0
Info: ''
2:
Bounds: x1=4, y1=4, x2=172, y2=203
Type: -64
Info: '#'
3:
Bounds: x1=176, y1=4, x2=456, y2=36
Type: -120
Info: 'If you have an internal hard disk, the SCSI priority must be changed by your dealer. '
4:
Bounds: x1=176, y1=40, x2=452, y2=120
Type: -120
Info: 'If you have an external hard disk, the SCSI priority is set by the selection switch on the back panel. To change the priority of "^0" to ^1:'
5:
Bounds: x1=208, y1=128, x2=454, y2=177
Type: -120
Info: 'Quit DriveManager and shut down your ^2. Turn the hard disk off.'
6:
Bounds: x1=208, y1=184, x2=454, y2=201
Type: -120
Info: 'Set the selection switch to ^1.'
7:
Bounds: x1=208, y1=208, x2=455, y2=242
Type: -120
Info: 'Turn the hard disk back on. Reboot your ^2.'
8:
Bounds: x1=176, y1=128, x2=192, y2=144
Type: -120
Info: '1.'
9:
Bounds: x1=176, y1=184, x2=192, y2=200
Type: -120
Info: '2.'
10:
Bounds: x1=176, y1=208, x2=192, y2=224
Type: -120
Info: '3.'
11:
Bounds: x1=68, y1=92, x2=98, y2=117
Type: -128
Info: ''
12:
Bounds: x1=16456, y1=264, x2=16486, y2=289
Type: -64
Info: 'Ù'
13:
Bounds: x1=16493, y1=264, x2=16523, y2=289
Type: -64
Info: 'ı'
14:
Bounds: x1=16533, y1=264, x2=16563, y2=289
Type: -64
Info: 'ˆ'
15:
Bounds: x1=16574, y1=264, x2=16604, y2=289
Type: -64
Info: '˜'
16:
Bounds: x1=16615, y1=264, x2=16645, y2=289
Type: -64
Info: '¯'
17:
Bounds: x1=16655, y1=264, x2=16685, y2=289
Type: -64
Info: '˘'
18:
Bounds: x1=16697, y1=264, x2=16727, y2=289
Type: -64
Info: '˙'
19:
Bounds: x1=48, y1=248, x2=380, y2=264
Type: 8
Info: 'For further information, consult the User Manual.'
DITL_290_Init Failed.txt
Items: (4 entries)
0:
Bounds: x1=100, y1=44, x2=160, y2=64
Type: 4
Info: 'OK'
1:
Bounds: x1=96, y1=40, x2=164, y2=68
Type: -128
Info: ''
2:
Bounds: x1=12, y1=8, x2=44, y2=40
Type: -128
Info: ''
3:
Bounds: x1=72, y1=12, x2=213, y2=30
Type: -120
Info: 'Initialization failed!'
DITL_289_verifying.txt
Items: (1 entries)
0:
Bounds: x1=43, y1=3, x2=399, y2=19
Type: -120
Info: 'Please wait. Verifying driver software on hard disks.'
DITL_287_NoSetSCSIID.txt
Items: (19 entries)
0:
Bounds: x1=204, y1=264, x2=264, y2=284
Type: 4
Info: 'OK'
1:
Bounds: x1=200, y1=260, x2=268, y2=288
Type: 0
Info: ''
2:
Bounds: x1=4, y1=4, x2=172, y2=203
Type: -64
Info: '#'
3:
Bounds: x1=176, y1=8, x2=452, y2=109
Type: -120
Info: 'The SCSI priority of "^0" is set by the selection switch on the back panel or internal mounting bracket. To change the SCSI priority of "^0" to ^1:'
4:
Bounds: x1=200, y1=112, x2=456, y2=160
Type: -120
Info: 'Quit DriveManager and shut down your ^2. If the hard disk is external, turn it off.'
5:
Bounds: x1=200, y1=168, x2=456, y2=184
Type: -120
Info: 'Set the selection switch to ^1.'
6:
Bounds: x1=200, y1=192, x2=460, y2=224
Type: -120
Info: 'If you have an external hard disk, turn it back on. Reboot your ^2.'
7:
Bounds: x1=176, y1=112, x2=192, y2=128
Type: -120
Info: '1.'
8:
Bounds: x1=176, y1=168, x2=192, y2=184
Type: -120
Info: '2.'
9:
Bounds: x1=176, y1=192, x2=192, y2=208
Type: -120
Info: '3.'
10:
Bounds: x1=48, y1=236, x2=380, y2=252
Type: -120
Info: 'For further information, consult the User Manual.'
11:
Bounds: x1=66, y1=92, x2=96, y2=117
Type: -128
Info: ''
12:
Bounds: x1=16454, y1=251, x2=16484, y2=276
Type: -64
Info: 'Ù'
13:
Bounds: x1=16494, y1=251, x2=16524, y2=276
Type: -64
Info: 'ı'
14:
Bounds: x1=16534, y1=251, x2=16564, y2=276
Type: -64
Info: 'ˆ'
15:
Bounds: x1=16574, y1=251, x2=16604, y2=276
Type: -64
Info: '˜'
16:
Bounds: x1=16615, y1=251, x2=16645, y2=276
Type: -64
Info: '¯'
17:
Bounds: x1=16655, y1=251, x2=16685, y2=276
Type: -64
Info: '˘'
18:
Bounds: x1=16695, y1=251, x2=16725, y2=276
Type: -64
Info: '˙'
DITL_284_Status.txt
Items: (2 entries)
0:
Bounds: x1=11, y1=7, x2=43, y2=39
Type: -128
Info: ''
1:
Bounds: x1=51, y1=7, x2=249, y2=69
Type: -120
Info: '^0^1^2^3…'
DITL_283_Bad Interleave.txt
Items: (4 entries)
0:
Bounds: x1=52, y1=88, x2=124, y2=108
Type: 4
Info: 'Cancel'
1:
Bounds: x1=48, y1=84, x2=128, y2=112
Type: -128
Info: ''
2:
Bounds: x1=196, y1=88, x2=268, y2=108
Type: 4
Info: 'Continue'
3:
Bounds: x1=39, y1=16, x2=284, y2=64
Type: -120
Info: 'Interleave ^0 will not provide the maximum performance possible for your ^1.'
DITL_281_checking.txt
Items: (1 entries)
0:
Bounds: x1=33, y1=3, x2=409, y2=19
Type: -120
Info: 'Please wait. Checking revision levels on GCC hard disks.'
DITL_280_Chng Intrlv.txt
Items: (8 entries)
0:
Bounds: x1=312, y1=228, x2=372, y2=248
Type: 4
Info: 'Cancel'
1:
Bounds: x1=308, y1=224, x2=376, y2=252
Type: 0
Info: ''
2:
Bounds: x1=204, y1=228, x2=264, y2=248
Type: 4
Info: 'OK'
3:
Bounds: x1=340, y1=176, x2=366, y2=192
Type: 16
Info: ''
4:
Bounds: x1=17, y1=6, x2=134, y2=251
Type: -64
Info: ''
5:
Bounds: x1=152, y1=8, x2=425, y2=91
Type: -120
Info: '^0^1. For maximum performance with your ^2, the recommended interleave is ^3.'
6:
Bounds: x1=152, y1=100, x2=427, y2=151
Type: -120
Info: 'You must reformat your GCC hard disk in order for the new interleave to take effect.'
7:
Bounds: x1=204, y1=176, x2=335, y2=193
Type: -120
Info: 'Interleave value:'
DITL_279_NotOkToMount.txt
Items: (6 entries)
0:
Bounds: x1=40, y1=140, x2=100, y2=160
Type: 4
Info: 'Cancel'
1:
Bounds: x1=36, y1=136, x2=104, y2=164
Type: -128
Info: ''
2:
Bounds: x1=148, y1=140, x2=208, y2=160
Type: 4
Info: 'Format'
3:
Bounds: x1=36, y1=104, x2=213, y2=120
Type: 16
Info: 'Untitled'
4:
Bounds: x1=8, y1=8, x2=235, y2=76
Type: -120
Info: 'This disk appears to have been formatted on a different computer. In order to use it on a Macintosh, you must format it.'
5:
Bounds: x1=36, y1=80, x2=184, y2=96
Type: -120
Info: 'Please name the disk:'
DITL_275_disaster.txt
Items: (4 entries)
0:
Bounds: x1=40, y1=148, x2=112, y2=168
Type: 4
Info: 'Cancel'
1:
Bounds: x1=36, y1=144, x2=116, y2=172
Type: -128
Info: ''
2:
Bounds: x1=184, y1=148, x2=256, y2=168
Type: 4
Info: 'Format'
3:
Bounds: x1=8, y1=4, x2=292, y2=132
Type: -120
Info: 'The hard disk "^0" appears to have major problems. The only function that DriveManager can perform is to format the hard disk.Formatting the hard disk will erase all files.'
DITL_274_About2.txt
Items: (34 entries)
0:
Bounds: x1=204, y1=188, x2=264, y2=208
Type: 4
Info: 'OK'
1:
Bounds: x1=200, y1=184, x2=268, y2=212
Type: -128
Info: ''
2:
Bounds: x1=8, y1=56, x2=216, y2=72
Type: -120
Info: ''
3:
Bounds: x1=8, y1=72, x2=216, y2=88
Type: -120
Info: ''
4:
Bounds: x1=8, y1=88, x2=216, y2=104
Type: -120
Info: ''
5:
Bounds: x1=8, y1=104, x2=216, y2=120
Type: -120
Info: ''
6:
Bounds: x1=8, y1=120, x2=216, y2=136
Type: -120
Info: ''
7:
Bounds: x1=8, y1=136, x2=216, y2=152
Type: -120
Info: ''
8:
Bounds: x1=8, y1=152, x2=216, y2=168
Type: -120
Info: ''
9:
Bounds: x1=216, y1=56, x2=260, y2=72
Type: -120
Info: ''
10:
Bounds: x1=216, y1=72, x2=260, y2=88
Type: -120
Info: ''
11:
Bounds: x1=216, y1=88, x2=260, y2=104
Type: -120
Info: ''
12:
Bounds: x1=216, y1=104, x2=260, y2=120
Type: -120
Info: ''
13:
Bounds: x1=216, y1=120, x2=260, y2=136
Type: -120
Info: ''
14:
Bounds: x1=216, y1=136, x2=260, y2=152
Type: -120
Info: ''
15:
Bounds: x1=216, y1=152, x2=260, y2=168
Type: -120
Info: ''
16:
Bounds: x1=260, y1=56, x2=304, y2=72
Type: -120
Info: ''
17:
Bounds: x1=260, y1=72, x2=304, y2=88
Type: -120
Info: ''
18:
Bounds: x1=260, y1=88, x2=304, y2=104
Type: -120
Info: ''
19:
Bounds: x1=260, y1=104, x2=304, y2=120
Type: -120
Info: ''
20:
Bounds: x1=260, y1=120, x2=304, y2=136
Type: -120
Info: ''
21:
Bounds: x1=260, y1=136, x2=304, y2=152
Type: -120
Info: ''
22:
Bounds: x1=260, y1=152, x2=304, y2=168
Type: -120
Info: ''
23:
Bounds: x1=344, y1=56, x2=456, y2=72
Type: -120
Info: ''
24:
Bounds: x1=344, y1=72, x2=456, y2=88
Type: -120
Info: ''
25:
Bounds: x1=344, y1=88, x2=456, y2=104
Type: -120
Info: ''
26:
Bounds: x1=344, y1=104, x2=456, y2=120
Type: -120
Info: ''
27:
Bounds: x1=344, y1=120, x2=456, y2=136
Type: -120
Info: ''
28:
Bounds: x1=344, y1=136, x2=456, y2=152
Type: -120
Info: ''
29:
Bounds: x1=344, y1=152, x2=456, y2=168
Type: -120
Info: ''
30:
Bounds: x1=160, y1=8, x2=308, y2=24
Type: -120
Info: 'Hard Disk Information'
31:
Bounds: x1=8, y1=36, x2=48, y2=52
Type: -120
Info: 'Name'
32:
Bounds: x1=232, y1=36, x2=332, y2=52
Type: -120
Info: 'Driver Revision'
33:
Bounds: x1=344, y1=36, x2=440, y2=52
Type: -120
Info: 'Serial Number'
DITL_273_searching.txt
Items: (1 entries)
0:
Bounds: x1=59, y1=3, x2=383, y2=19
Type: -120
Info: 'Please wait. Searching for unmounted volumes.'
DITL_272_testing.txt
Items: (5 entries)
0:
Bounds: x1=184, y1=144, x2=280, y2=164
Type: 4
Info: 'Abort Test'
1:
Bounds: x1=180, y1=140, x2=284, y2=168
Type: -128
Info: ''
2:
Bounds: x1=160, y1=104, x2=416, y2=136
Type: -120
Info: 'Drive Test in Progress... Pass ^3 ^0% done'
3:
Bounds: x1=24, y1=16, x2=141, y2=75
Type: -64
Info: ''
4:
Bounds: x1=160, y1=12, x2=444, y2=96
Type: -120
Info: 'The drive test takes several minutes to complete. Do not disturb or switch off the ^1 or the hard drive "^2" during the drive test.'
DITL_268_NoRes.txt
Items: (4 entries)
0:
Bounds: x1=24, y1=100, x2=96, y2=120
Type: 4
Info: 'Quit'
1:
Bounds: x1=20, y1=96, x2=100, y2=124
Type: 0
Info: ''
2:
Bounds: x1=184, y1=100, x2=256, y2=120
Type: 4
Info: 'Continue'
3:
Bounds: x1=8, y1=4, x2=280, y2=84
Type: -120
Info: 'The DriveManager cannot load all needed resources. Your copy of DriveManager may be damaged. If you are running under MultiFinder, increase DriveManager's memory allocation.'
DITL_266_NoDriver.txt
Items: (4 entries)
0:
Bounds: x1=28, y1=92, x2=100, y2=112
Type: 4
Info: 'Quit'
1:
Bounds: x1=24, y1=88, x2=104, y2=116
Type: -128
Info: ''
2:
Bounds: x1=144, y1=92, x2=216, y2=112
Type: 4
Info: 'Continue'
3:
Bounds: x1=4, y1=8, x2=240, y2=72
Type: -120
Info: 'The DriveManager cannot mount all of the currently unmounted GCC disks. To mount all GCC disks, quit the DriveManager and reboot.'
DITL_263_higherrev.txt
Items: (4 entries)
0:
Bounds: x1=164, y1=116, x2=248, y2=136
Type: 4
Info: 'Quit'
1:
Bounds: x1=160, y1=112, x2=252, y2=140
Type: 0
Info: ''
2:
Bounds: x1=24, y1=116, x2=108, y2=136
Type: 4
Info: 'Continue'
3:
Bounds: x1=4, y1=8, x2=272, y2=104
Type: -120
Info: 'The DriveManager has older driver software than "^0". Contact your dealer for a new DriveManager. If you continue, you will only be able to Test Disk.'
DITL_262_lowerrev.txt
Items: (4 entries)
0:
Bounds: x1=160, y1=84, x2=220, y2=104
Type: 4
Info: 'Update'
1:
Bounds: x1=156, y1=80, x2=224, y2=108
Type: -128
Info: ''
2:
Bounds: x1=40, y1=84, x2=100, y2=104
Type: 4
Info: 'Cancel'
3:
Bounds: x1=4, y1=8, x2=256, y2=72
Type: -120
Info: 'The driver software on "^0" appears to be out-of-date. Do you want it updated?'
DITL_261_damaged.txt
Items: (4 entries)
0:
Bounds: x1=144, y1=64, x2=204, y2=84
Type: 4
Info: 'Repair'
1:
Bounds: x1=140, y1=60, x2=208, y2=88
Type: -128
Info: ''
2:
Bounds: x1=40, y1=64, x2=100, y2=84
Type: 4
Info: 'Cancel'
3:
Bounds: x1=4, y1=4, x2=236, y2=52
Type: -120
Info: 'The GCC hard disk "^0" has damaged driver software.'