home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Simtel MSDOS - Coast to Coast
/
simteldosarchivecoasttocoast2.iso
/
windows3
/
xperspx1.zip
/
SETUP.INF
< prev
next >
Wrap
INI File
|
1994-02-16
|
44KB
|
1,306 lines
;
; SETUP.INF: XperCASE-Setup configuration file
;
; IMPORTANT:
; To get the default value for any keyname the keyname MUST NOT exist.
; (An empty value for a keyname delivers an empty string or 0 or false.)
;
; ALL CHARACTERS IN THIS FILE MUST BE IN ANSI-FORMAT!
; (ae=Σ, oe=÷, ue=ⁿ, Ae=─, Oe=╓, Ue=▄, Sz=▀)
; R.K. 4.12.92:
; New command syntax for setup: SETUP.EXE [<conf.-file>] [/s|/w|/l]
; Optional (caseinsensitiv) parameters:
; <conf.-file> ... You can now specify an userspecific configuration
; file. The default filename is SETUP.INF
; /s ... Setup makes only the serverinstallation
; /l ... - " - licenseinstallation
; /w ... - " - workstationinstallation
[SetupConf]
; Possible values for SetupType : SD|SP|SPX|C|COB|COL|JET|FT|
; C-Pack|COB-Pack|COL-Pack|SPX-Pack|
; COL2COB-Pack|ALL|LicPackSetup
; Possible values for Special : no|0|false|mbp|HLOI ;Default: no
; Possible values for DemoVersion : no|0|false|yes|1|true ;Default: no
; Possible values for Network : no|0|false|yes|1|true ;Default: no
; If Network is 'No', the Network-section
; will be ignored.
; Attention: Values of SetupType and Special are used within the
; section name for a specific setup!
SetupType=SPX-Pack
DemoVersion=yes
Special=no
Network=no
[Network]
; ServerPath : <full dirname without \ at end except root>
; Server-defaultpath where to install XPER-LIC.DAT
; and XPER-%KOMP%.USR
; LicSourcePath : <full dirname without \ at end except root>
; Source-defaultpath for licensepackages to install
; If empty or not found start directory is taken.
; LicenseFile : <LicenseFileName>
; Filename of the licensefile in the serverpath
; LicensePackage : <LicensePackageFileName>
; Filename of the licensepackagefile to install
; Wildcards ('?' and/or '*') are allowed.
; XperNetDatFile : <DatFileName>
; Filename of the file, which contains the serverpath.
ServerPath='C:\XPER\USR'
LicSourcePath=
LicenseFile='XPER-LIC.DAT'
LicensePackage='XPER-LIC.NEW'
XperNetDatFile='XPER-NET.DAT'
; Meaning of keynames and possible values in the setup type specific section:
; ApplicationName : 'text' Name of application to be installed. Used in
; various dialog and message boxes.
; SetupName : 'text' Name of setup program itself. Used in various
; dialog and message boxes.
; SetupWindowTitle : 'text' Text displayed in caption bar of setup window.
; Default: SetupName
; UserName : 'Username'
; Username for workstationinstallation. If this
; entry is empty, the name must be entered
; during setup.
; ComponentInfo<N> : 'Application Version oldVersion'
; For each application in an application section
; there must be this entry. (f.e. 'SP 350 310'
; stands for XperCase(SP) V3.5, versions down to
; V3.1 will be supported.
; Examples : no|0|false|yes|1|true ;Default: yes
; Indicates whether there are examples. If no
; examples, no controls for them are displayed
; in the dialog boxes.
; CopyExamples : no|0|false|yes|1|true ;Default: Wert von Examples
; Initial state of copy examples checkbox.
; SourcePath : <full dirname without \ at end except root>
; Default path for source of installation.
; If empty or not found start directory is taken.
; DestinationPath : <full dirname without \ at end except root>
; Default path where to install the software.
; ExamplePath : <full dirname without \ at end except root>
; Default path where to install the examples.
; MinDiskSpaceSystem : <int>[KB] ; Default: 256 KB
; Minimum disk space needed for systemfiles
; MinDiskSpaceProgram : <int>[KB] ; Default: 1000 KB
; Minimum disk space needed for programs.
; MinDiskSpaceExamples: <int>[KB] ; Default: 100 KB
; Minimum disk space needed for examples.
; DefaultSourceEditor : 'text' If not empty dialog box for source editor
; configuration will be displayed with text as
; default for the source editor.
; If empty SourceEditorKey must be empty too
; and vice versa.
; SourceEditorKey : 'text' Keyname of private ini entry for source editor.
; Value of this entry must be used in exactly
; one 'IniFileEntry<N>=' entry.
; If empty DefaultSourceEditor must be empty too
; and vice versa.
; DefaultDataPoolName : 'text' If not empty dialog box for (JET-specific
; option) data pool will be displayed with text
; as default for the data pool name.
; If empty DataPoolKey must be empty too
; and vice versa.
; DataPoolKey : 'text' Keyname of private ini entry for data pool.
; Value of this entry must be used in exactly
; one 'IniFileEntry<N>=' entry.
; If empty DefaultDataPoolName must be empty too
; and vice versa.
; DefaultProgmanGroup : 'text' Defaultname for ProgramManager group.
; FileTransfer : no|0|false|yes|1|true ;Default: no
; Default for checkbox file transfer support.
; FileTransferKey : 'text' Keyname of private ini entry for filetransfer.
; Value of this entry must be used in exactly
; one 'IniFileEntry<N>=' entry.
; If empty checkbox for file transfer support
; is hidden but its state remains as given in
; FileTransfer.
;
; General notes on ProgramFile<N> and ExampleFile<N> entries:
; If no wildcard is used and file is not found, a request for the
; specified disk will be made if the diskname is specified. If the disk
; name is not specified and the file is not found on the disk currently
; in sourcepath a copy error launched and installation is aborted.
; If any wildcard is used and a diskname is specified, a request for
; the disk is made immediately and then all file matched are copied.
; If any wildcard is used and no diskname is specified, all matched
; files on the disk currently in sourcepath are copied without any
; disk change request.
; SystemFile<N> : '<disk>:<filename>'|'<filename>'
; Files to be copied to the windows system path.
; <N> ... sequential numbers starting at 1
; <disk> ... diskette name (used for disk
; change requests)
; <filename> ... name of file to be copied
; (relative to sourcepath)
; Example: SystemFile1='Disk1:COMMDLG.DLL'
; WindowsFile<N> : '<disk>:<filename>'|'<filename>'
; Files to be copied to the windows path.
; <N> ... sequential numbers starting at 1
; <disk> ... diskette name (used for disk
; change requests)
; <filename> ... name of file to be copied
; (relative to sourcepath)
; Example: WindowsFile1='Disk1:WINHELP.EXE'
; ProgramFile<N> : '<disk>:<filename>'|'<filename>'
; Files to be copied to destination path.
; <N> ... sequential numbers starting at 1
; <disk> ... diskette name (used for disk
; change requests)
; <filename> ... name of file to be copied
; (relative to sourcepath)
; Example: ProgramFile1='Disk1:XPER-SD.EXE'
; ExampleFile<N> : '<disk>:<filename>'|'<filename>'
; Files to be copied to example path.
; <N> ... sequential numbers starting at 1
; <disk> ... diskette name (used for disk
; change requests)
; <filename> ... name of file to be copied
; (relative to sourcepath)
; Example: ExampleFile1='Disk2:*.SP'
;
; PifFile<N> : '<disk>:<filename>'|'<filename>'
; Same syntax as described previously. In a non
; network-setup the piffiles will be copied to
; the installationpath. In a network-workstation-
; setup they will be copied to the local windows-
; path.
; If the piffile contains the string "%INSTPATH%"
; in the commandline, it will be substituted by
; the installationpath. (This only works, if the
; filelength of the piffile is 545 bytes as it is
; in Windows V3.0 and V3.1)
;
; 20.8.92: The functionalaty of the entries SystemFile<N>, ProgramFile<N>,
; ExampleFile<N> and PifFile<N> is now extended. You can make an entry of the
; form:
;
; <entry>='[<disk>:][<subdir1>\<subdir2>\...\]<filename> [/s]'
;
; for example: ExampleFile<1>='Disk1:SPX-PAS\*.* /S'
; This entry copies all files (with subdirectories) from the sourcedirectory
; to <examplepath>\SPX-PAS (SPX-PAS will be createt if it doesn't exist).
;
; NOTE THAT YOU MUST NOT ADD A '\' BEFORE THE FIRST SUBDIR!!
;
; Systemfiles are copied <windowssysdir>, programfiles are copied to
; the installationpath.
;
; WinIniEntry<N> : '[<section>] <keyname>=<value>'
; Entries to be made in win.ini.
; <section> ... name of section in win.ini
; <keyname> ... keyname of entry
; <value> ... value of entry
; Sample: WinIniEntry1=
; '[extensions] sd=xper-sd.exe ^.sd'
; IniFileEntry<N> : '<inifilename> [<section>] <keyname>=<value>'
; Entries to be made in private Ini-Files.
; <inifilename> ... name of Ini-File
; <section> ... name of section in Ini-File
; <keyname> ... keyname of entry
; <value> ... value of entry
; Sample: IniFileEntry1=
; 'XPER-COB.INI [Settings] Compiler=none'
; ProgManEntry<N> : '<applname>:<filename>'
; Programs to be added to a progman group.
; <applname> ... name of application in ProgMan
; <filename> ... name of EXE-file
; Sample: ProgManEntry1=
; 'XperCASE(SD):xper-sd.exe'
; DelWinIniEntry<N> : '[<section>] <keyname>'
; Entries to delete from the WIN.INI-File
; <section> ... name of section in Ini-File
; <keyname> ... keyname of entry
; The entire line <keyname>=<value> will be
; deleted!
; DelRegDataEntry<N> : '<keyname>'
; Deletes the node <keyname> and all subkeys
; in the Registration Database.
; This entries are only used in Windows Version
; 3.1 and future versions.
; ExecWinApp<N> : '<application>'
; Executes the Windowsprogramm <application>.
; This enabels the application, for example, to
; make all necessary initialisations in the
; Registration Database and Ini-Files.
; <application> consists only of a filename and
; an extension and must not include a path!
; NetUserFile<N> : '<disk>:<UserFileName>!<IniFileName>' |
; '<UserFileName>!<IniFileName>'
; Name of the serverfile XPER-<KOMP>.USR.
; Wildcards are not valid!!
; If <IniFileName> is given, the [Network]-
; section is modified in this inifile. Otherwise
; <UserFileName> with extension '.INI' is used as
; the corresponding inifile.
; ATTENTION: These entries are used for
; singleplace- and networkinstallation, because
; for singleplaceinst. these entries are needed
; to find the inifile, where setup has to delete
; the [Network]-section!
[SD]
; XperCASE(SD)
ApplicationName='XperCASE(SD)'
SetupName='XperCASE(SD) - Setup'
SetupWindowTitle='XperCASE(SD) - Setup'
UserName=
ComponentInfo1='SD 350 310'
Examples=yes
CopyExamples=yes
SourcePath=
DestinationPath='C:\XPER'
ExamplePath='C:\XPER\SAMPLES'
MinDiskSpaceSystem=310
MinDiskSpaceProgram=400
MinDiskSpaceExamples=80
; DefaultSourceEditor=
; SourceEditorKey=
; DefaultDataPoolName=
; DataPoolKey=
DefaultProgmanGroup='SIEMENS XperCASE'
FileTransfer=no
; FileTransferKey=
; SystemFile1=
WindowsFile1='1:WINHELP.EXE'
WindowsFile2='1:WINHELP.HLP'
ProgramFile1='1:XPER-INI.DLL'
ProgramFile2='1:XPER-SD.EXE'
ProgramFile3='1:XPER-SD.HLP'
ProgramFile4='1:XPER-DD.EXE'
PifFile1='1:XPER-DD.PIF'
ExampleFile1='*.SD'
ExampleFile2='*.SDE'
ExampleFile3='*.SDZ'
ExampleFile4='*.DBT'
ExampleFile5='STDNE?.*'
; WinIniEntry1='[extensions] sd=xper-sd.exe ^.sd'
; WinIniEntry2='[extensions] sde=xper-sd.exe ^.sd'
; WinIniEntry3='[extensions] sdz=xper-sd.exe ^.sd'
; WinIniEntry4='[extensions] dbt=xper-sd.exe ^.sd'
DelWinIniEntry1='[extensions] sd'
DelWinIniEntry2='[extensions] sde'
DelWinIniEntry3='[extensions] sdz'
DelWinIniEntry4='[extensions] dbt'
; DelRegDataEntry1=
IniFileEntry1='XPER-SD.INI [Settings] ReportHeader='%PR% %->% %##%''
ProgManEntry1='XperCASE(SD):xper-sd.exe'
NetUserFile1='1:XPER-SD.USR!XPER-SD.INI'
ExecWinApp1='XPER-SD.EXE /INITIALIZE'
[SP]
; XperCASE(SP)
ApplicationName='XperCASE(SP)'
SetupName='XperCASE(SP) - Setup'
SetupWindowTitle='XperCASE(SP) - Setup'
UserName=
ComponentInfo1='SP 350 310'
Examples=yes
CopyExamples=yes
SourcePath=
DestinationPath='C:\XPER'
ExamplePath='C:\XPER\SAMPLES'
MinDiskSpaceSystem=550
MinDiskSpaceProgram=700
MinDiskSpaceExamples=25
; DefaultSourceEditor=
; SourceEditorKey=
; DefaultDataPoolName=
; DataPoolKey=
DefaultProgmanGroup='SIEMENS XperCASE'
FileTransfer=no
FileTransferKey='FtAvailable'
SystemFile1='1:COMMDLG.DLL'
SystemFile2='1:OLESVR.DLL'
SystemFile3='1:OLECLI.DLL'
SystemFile4='1:SHELL.DLL'
WindowsFile1='1:WINHELP.EXE'
WindowsFile2='1:WINHELP.HLP'
ProgramFile1='1:XPER-INI.DLL'
ProgramFile2='1:XPER-FTL.DLL'
ProgramFile3='1:XPER-SP.EXE'
ProgramFile4='1:XPER-SP.HLP'
ProgramFile5='1:XPER-RE.EXE'
ProgramFile6='1:WINNOP.EXE'
PifFile1='1:XPER-FTP.PIF'
PifFile2='1:XPER-RE.PIF'
ExampleFile1='*.SP_'
; WinIniEntry1='[extensions] sp=xper-sp.exe ^.sp'
IniFileEntry1='XPER-SP.INI [Settings] FtAvailable=???'
DelWinIniEntry1='[extensions] sp'
DelWinIniEntry2='[embedding] xpersp'
DelRegDataEntry1='.sp'
DelRegDataEntry2='xpersp'
ProgManEntry1='XperCASE(SP):xper-sp.exe'
NetUserFile1='1:XPER-SP.USR!XPER-SP.INI'
ExecWinApp1='XPER-SP.EXE /INITIALIZE'
[SPX]
; XperCASE(SPX)
ApplicationName='XperCASE(SPX)'
SetupName='XperCASE(SPX) - Setup'
SetupWindowTitle='XperCASE(SPX) - Setup'
UserName=
ComponentInfo1='SPX 350 310'
Examples=yes
CopyExamples=yes
SourcePath=
DestinationPath='C:\XPER'
ExamplePath='C:\XPER\SAMPLES'
MinDiskSpaceSystem=550
MinDiskSpaceProgram=725
MinDiskSpaceExamples=500
; DefaultSourceEditor=
; SourceEditorKey=
; DefaultDataPoolName=
; DataPoolKey=
DefaultProgmanGroup='SIEMENS XperCASE'
FileTransfer=no
FileTransferKey='FtAvailable'
SystemFile1='1:COMMDLG.DLL'
SystemFile2='1:OLESVR.DLL'
SystemFile3='1:OLECLI.DLL'
SystemFile4='1:SHELL.DLL'
WindowsFile1='1:WINHELP.EXE'
WindowsFile2='1:WINHELP.HLP'
ProgramFile1='1:XPER-INI.DLL'
ProgramFile2='1:XPER-FTL.DLL'
ProgramFile3='1:XPER-SPX.EXE'
ProgramFile4='1:READ.ME'
ProgramFile5='2:XPER-SPX.HLP'
ProgramFile6='2:XPER-RE.EXE'
ProgramFile7='2:WINNOP.EXE'
PifFile1='1:XPER-FTP.PIF'
PifFile2='1:XPER-RE.PIF'
ExampleFile1='SPX-4GL\*.* /S'
ExampleFile2='SPX-ADA\*.* /S'
ExampleFile3='SPX-BAS\*.* /S'
ExampleFile4='SPX-CHIL\*.* /S'
ExampleFile5='SPX-CLP\*.* /S'
ExampleFile6='SPX-CPP\*.* /S'
ExampleFile7='SPX-DBAS\*.* /S'
ExampleFile8='SPX-FORT\*.* /S'
ExampleFile9='SPX-MOD2\*.* /S'
ExampleFile10='SPX-NAT\*.* /S'
ExampleFile11='SPX-PAS\*.* /S'
ExampleFile12='SPX-PL1\*.* /S'
ExampleFile13='SPX-SPL4\*.* /S'
; WinIniEntry1='[extensions] spx=xper-spx.exe ^.spx'
IniFileEntry1='XPER-SPX.INI [Settings] FtAvailable=???'
DelWinIniEntry1='[extensions] spx'
DelWinIniEntry2='[embedding] xperspx'
DelRegDataEntry1='.spx'
DelRegDataEntry2='xperspx'
ProgManEntry1='XperCASE(SPX):xper-spx.exe'
NetUserFile1='2:XPER-SPX.USR!XPER-SPX.INI'
ExecWinApp1='XPER-SPX.EXE /INITIALIZE'
[C]
; XperCASE(C)
ApplicationName='XperCASE(C)'
SetupName='XperCASE(C) - Setup'
SetupWindowTitle='XperCASE(C) - Setup'
UserName=
ComponentInfo1='C 350 310'
Examples=yes
CopyExamples=yes
SourcePath=
DestinationPath='C:\XPER'
ExamplePath='C:\XPER\SAMPLES'
MinDiskSpaceSystem=550
MinDiskSpaceProgram=725
MinDiskSpaceExamples=40
; DefaultSourceEditor=
; SourceEditorKey=
; DefaultDataPoolName=
; DataPoolKey=
DefaultProgmanGroup='SIEMENS XperCASE'
FileTransfer=no
FileTransferKey='FtAvailable'
SystemFile1='1:COMMDLG.DLL'
SystemFile2='1:OLESVR.DLL'
SystemFile3='1:OLECLI.DLL'
SystemFile4='1:SHELL.DLL'
WindowsFile1='1:WINHELP.EXE'
WindowsFile2='1:WINHELP.HLP'
ProgramFile1='1:XPER-INI.DLL'
ProgramFile2='1:XPER-FTL.DLL'
ProgramFile3='1:XPER-C.EXE'
ProgramFile4='1:XPER-C.HLP'
ProgramFile5='1:XPER-RE.EXE'
ProgramFile6='1:WINNOP.EXE'
PifFile1='1:XPER-FTP.PIF'
PifFile2='1:XPER-RE.PIF'
ExampleFile1='*.C_'
ExampleFile2='*.SP_'
; WinIniEntry1='[extensions] c=xper-c.exe ^.c'
IniFileEntry1='XPER-C.INI [Settings] FtAvailable=???'
DelWinIniEntry1='[extensions] c'
DelWinIniEntry2='[embedding] xperc'
DelRegDataEntry1='.c'
DelRegDataEntry2='xperc'
ProgManEntry1='XperCASE(C):xper-c.exe'
NetUserFile1='1:XPER-C.USR!XPER-C.INI'
ExecWinApp1='XPER-C.EXE /INITIALIZE'
[COB]
; XperCASE(COB)
ApplicationName='XperCASE(COB)'
SetupName='XperCASE(COB) - Setup'
SetupWindowTitle='XperCASE(COB) - Setup'
UserName=
ComponentInfo1='COB 350 310'
Examples=yes
CopyExamples=yes
SourcePath=
DestinationPath='C:\XPER'
ExamplePath='C:\XPER\SAMPLES'
MinDiskSpaceSystem=550
MinDiskSpaceProgram=1030
MinDiskSpaceExamples=150
DefaultSourceEditor='NOTEPAD.EXE %FN%'
SourceEditorKey='SourceEditor'
; DefaultDataPoolName=
; DataPoolKey=
DefaultProgmanGroup='SIEMENS XperCASE'
FileTransfer=no
FileTransferKey='FtAvailable'
SystemFile1='1:COMMDLG.DLL'
SystemFile2='1:OLESVR.DLL'
SystemFile3='1:OLECLI.DLL'
SystemFile4='1:SHELL.DLL'
WindowsFile1='1:WINHELP.EXE'
WindowsFile2='1:WINHELP.HLP'
ProgramFile1='1:XPER-INI.DLL'
ProgramFile2='1:XPER-FTL.DLL'
ProgramFile3='1:XPER-COB.EXE'
ProgramFile4='2:XPER-COB.HLP'
ProgramFile5='2:XPER-PAR.DLL'
ProgramFile6='2:ERRMSG.DAT'
ProgramFile7='2:XPER-RE.EXE'
ProgramFile8='2:WINNOP.EXE'
PifFile1='1:XPER-FTP.PIF'
PifFile2='1:XPER-RE.PIF'
ExampleFile1='*.EC_'
ExampleFile2='*.CO_'
ExampleFile3='*.SP_'
; WinIniEntry1='[extensions] cob=xper-cob.exe ^.cob'
; WinIniEntry2='[extensions] ecb=xper-cob.exe ^.ecb'
IniFileEntry1='XPER-COB.INI [Settings] SourceEditor=???'
IniFileEntry2='XPER-COB.INI [Settings] Compiler=none'
IniFileEntry3='XPER-COB.INI [Settings] FtAvailable=???'
DelWinIniEntry1='[extensions] cob'
DelWinIniEntry2='[extensions] ecb'
DelWinIniEntry3='[embedding] xpercob'
DelWinIniEntry4='[embedding] xpercobsource'
DelRegDataEntry1='.cob'
DelRegDataEntry2='.ecb'
DelRegDataEntry3='xpercob'
DelRegDataEntry4='xpercobsource'
ProgManEntry1='XperCASE(COB):xper-cob.exe'
NetUserFile1='2:XPER-COB.USR!XPER-COB.INI'
ExecWinApp1='XPER-COB.EXE /INITIALIZE'
[COL]
; XperCASE(COL)
ApplicationName='XperCASE(COL)'
SetupName='XperCASE(COL) - Setup'
SetupWindowTitle='XperCASE(COL) - Setup'
UserName=
ComponentInfo1='COL 350 310'
Examples=yes
CopyExamples=yes
SourcePath=
DestinationPath='C:\XPER'
ExamplePath='C:\XPER\SAMPLES'
MinDiskSpaceSystem=550
MinDiskSpaceProgram=750
MinDiskSpaceExamples=45
; DefaultSourceEditor=
; SourceEditorKey=
; DefaultDataPoolName=
; DataPoolKey=
DefaultProgmanGroup='SIEMENS XperCASE'
FileTransfer=yes
FileTransferKey='FtAvailable'
SystemFile1='1:COMMDLG.DLL'
SystemFile2='1:OLESVR.DLL'
SystemFile3='1:OLECLI.DLL'
SystemFile4='1:SHELL.DLL'
WindowsFile1='1:WINHELP.EXE'
WindowsFile2='1:WINHELP.HLP'
ProgramFile1='1:XPER-INI.DLL'
ProgramFile2='1:XPER-FTL.DLL'
ProgramFile3='1:XPER-COL.EXE'
ProgramFile4='1:XPER-COL.HLP'
ProgramFile5='1:XPER-RE.EXE'
ProgramFile6='1:WINNOP.EXE'
PifFile1='1:XPER-FTP.PIF'
PifFile2='1:XPER-RE.PIF'
ExampleFile1='*.CO_'
ExampleFile2='*.SP_'
; WinIniEntry1='[extensions] col=xper-col.exe ^.col'
IniFileEntry1='XPER-COL.INI [Settings] FtAvailable=???'
DelWinIniEntry1='[extensions] col'
DelWinIniEntry2='[embedding] xpercol'
DelRegDataEntry1='.col'
DelRegDataEntry2='xpercol'
ProgManEntry1='XperCASE(COL):xper-col.exe'
NetUserFile1='1:XPER-COL.USR!XPER-COL.INI'
ExecWinApp1='XPER-COL.EXE /INITIALIZE'
[JET]
; XperCASE(JET)
ApplicationName='XperCASE(JET)'
SetupName='XperCASE(JET) - Setup'
SetupWindowTitle='XperCASE(JET) - Setup'
UserName=
ComponentInfo1='JET 350 310'
Examples=yes
CopyExamples=yes
SourcePath=
DestinationPath='C:\XPER'
ExamplePath='C:\XPER\SAMPLES'
MinDiskSpaceSystem=550
MinDiskSpaceProgram=2000
MinDiskSpaceExamples=20
; DefaultSourceEditor=
; SourceEditorKey=
DefaultDataPoolName='$A.B0X085X'
DataPoolKey='DataPool'
DefaultProgmanGroup='SIEMENS XperCASE'
FileTransfer=yes
FileTransferKey='FtAvailable'
SystemFile1='1:COMMDLG.DLL'
SystemFile2='1:OLESVR.DLL'
SystemFile3='1:OLECLI.DLL'
SystemFile4='1:SHELL.DLL'
WindowsFile1='1:WINHELP.EXE'
WindowsFile2='1:WINHELP.HLP'
ProgramFile1='1:XPER-INI.DLL'
ProgramFile2='1:XPER-FTL.DLL'
ProgramFile3='1:XPER-JET.EXE'
ProgramFile4='2:XPER-JET.HLP'
ProgramFile5='2:XPER-JET.SDF'
ProgramFile6='2:XPER-RE.EXE'
ProgramFile7='2:WINNOP.EXE'
PifFile1='1:XPER-FTP.PIF'
PifFile2='1:XPER-RE.PIF'
ExampleFile1='*.JE_'
; WinIniEntry1='[extensions] jet=xper-jet.exe ^.jet'
IniFileEntry1='XPER-JET.INI [Settings] DataPool=???'
IniFileEntry2='XPER-JET.INI [Settings] FtAvailable=???'
IniFileEntry3='XPER-JET.INI [Settings] JobLog=no'
IniFileEntry4='XPER-JET.INI [Settings] DeleteWorkFiles=no'
DelWinIniEntry1='[extensions] jet'
DelWinIniEntry2='[embedding] xperjet'
DelRegDataEntry1='.jet'
DelRegDataEntry2='xperjet'
ProgManEntry1='XperCASE(JET):xper-jet.exe'
NetUserFile1='2:XPER-JET.USR!XPER-JET.INI'
ExecWinApp1='XPER-JET.EXE /INITIALIZE'
[FT]
; XperFT
ApplicationName='XperFT'
SetupName='XperFT - Setup'
SetupWindowTitle='XperFT - Setup'
; UserName=
; ComponentInfo1='FT 0 0'
Examples=no
CopyExamples=no
SourcePath=
DestinationPath='C:\XPER'
ExamplePath='C:\XPER\SAMPLES'
MinDiskSpaceSystem=450
MinDiskSpaceProgram=110
MinDiskSpaceExamples=0
; DefaultSourceEditor=
; SourceEditorKey=
; DefaultDataPoolName=
; DataPoolKey=
DefaultProgmanGroup='SIEMENS XperCASE'
FileTransfer=yes
; FileTransferKey=
SystemFile1='1:COMMDLG.DLL'
SystemFile2='1:SHELL.DLL'
WindowsFile1='1:WINHELP.EXE'
WindowsFile2='1:WINHELP.HLP'
ProgramFile1='1:XPER-INI.DLL'
ProgramFile2='1:XPER-FTL.DLL'
ProgramFile3='1:XPER-FT.EXE'
PifFile1='1:XPER-FTP.PIF'
; ExampleFile1=
WinIniEntry1='[extensions] ft=xper-ft.exe ^.ft'
; IniFileEntry1=
; DelWinIniEntry1='[extensions] ft'
; DelRegDataEntry1='.ft'
; DelRegDataEntry2='xperft'
ProgManEntry1='XperFT:xper-ft.exe'
; NetUserFile1='1:XPER-FT.USR!XPER-FT.INI'
; ExecWinApp1='XPER-FT.EXE /INITIALIZE'
[SPX-Pack]
; XperCASE(SPX)-Package
ApplicationName='XperCASE'
SetupName='XperCASE(SPX-Pack) - Setup'
SetupWindowTitle='XperCASE - Setup'
UserName=
ComponentInfo1='SD 350 310'
ComponentInfo2='SP 350 310'
ComponentInfo3='SPX 350 310'
Examples=yes
CopyExamples=yes
SourcePath=
DestinationPath='C:\XPER'
ExamplePath='C:\XPER\SAMPLES'
MinDiskSpaceSystem=550
MinDiskSpaceProgram=1700
MinDiskSpaceExamples=650
; DefaultSourceEditor=
; SourceEditorKey=
; DefaultDataPoolName=
; DataPoolKey=
DefaultProgmanGroup='SIEMENS XperCASE'
FileTransfer=no
FileTransferKey='FtAvailable'
SystemFile1='1:COMMDLG.DLL'
SystemFile2='1:OLESVR.DLL'
SystemFile3='1:OLECLI.DLL'
SystemFile4='1:SHELL.DLL'
WindowsFile1='1:WINHELP.EXE'
WindowsFile2='1:WINHELP.HLP'
ProgramFile1='1:XPER-INI.DLL'
ProgramFile2='1:XPER-FTL.DLL'
ProgramFile3='1:XPER-SD.EXE'
ProgramFile4='1:XPER-SD.HLP'
ProgramFile5='1:XPER-DD.EXE'
ProgramFile6='1:XPER-SP.EXE'
ProgramFile7='2:XPER-SP.HLP'
ProgramFile8='2:XPER-SPX.EXE'
ProgramFile9='2:XPER-SPX.HLP'
ProgramFile10='2:XPER-RE.EXE'
ProgramFile11='2:WINNOP.EXE'
PifFile1='1:XPER-DD.PIF'
PifFile2='1:XPER-FTP.PIF'
PifFile3='1:XPER-RE.PIF'
ExampleFile1='*.SD'
ExampleFile2='*.SDE'
ExampleFile3='*.SDZ'
ExampleFile4='*.DBT'
ExampleFile5='*.SP_'
ExampleFile6='*.PAS'
ExampleFile7='*.SPX'
ExampleFile8='STDNE?.*'
ExampleFile9='SPX-4GL\*.* /S'
ExampleFile10='SPX-ADA\*.* /S'
ExampleFile11='SPX-BAS\*.* /S'
ExampleFile12='SPX-CHIL\*.* /S'
ExampleFile13='SPX-CLP\*.* /S'
ExampleFile14='SPX-CPP\*.* /S'
ExampleFile15='SPX-DBAS\*.* /S'
ExampleFile16='SPX-FORT\*.* /S'
ExampleFile17='SPX-MOD2\*.* /S'
ExampleFile18='SPX-NAT\*.* /S'
ExampleFile19='SPX-PAS\*.* /S'
ExampleFile20='SPX-PL1\*.* /S'
ExampleFile21='SPX-SPL4\*.* /S'
; WinIniEntry1='[extensions] spx=xper-spx.exe ^.spx'
; WinIniEntry2='[extensions] sp=xper-sp.exe ^.sp'
; WinIniEntry3='[extensions] sd=xper-sd.exe ^.sd'
; WinIniEntry4='[extensions] sde=xper-sd.exe ^.sd'
; WinIniEntry5='[extensions] sdz=xper-sd.exe ^.sd'
; WinIniEntry6='[extensions] dbt=xper-sd.exe ^.sd'
IniFileEntry1='XPER-SD.INI [Settings] ReportHeader='%PR% %->% %##%''
IniFileEntry2='XPER-SP.INI [Settings] FtAvailable=???'
IniFileEntry3='XPER-SPX.INI [Settings] FtAvailable=???'
DelWinIniEntry1='[extensions] spx'
DelWinIniEntry2='[extensions] sp'
DelWinIniEntry3='[extensions] sd'
DelWinIniEntry4='[extensions] sde'
DelWinIniEntry5='[extensions] sdz'
DelWinIniEntry6='[extensions] dbt'
DelWinIniEntry7='[embedding] xperspx'
DelWinIniEntry8='[embedding] xpersp'
DelRegDataEntry1='.spx'
DelRegDataEntry2='.sp'
DelRegDataEntry3='xperspx'
DelRegDataEntry4='xpersp'
ProgManEntry1='XperCASE(SD):xper-sd.exe'
ProgManEntry2='XperCASE(SP):xper-sp.exe'
ProgManEntry3='XperCASE(SPX):xper-spx.exe'
NetUserFile1='2:XPER-SD.USR!XPER-SD.INI'
NetUserFile2='2:XPER-SP.USR!XPER-SP.INI'
NetUserFile3='2:XPER-SPX.USR!XPER-SPX.INI'
ExecWinApp1='XPER-SD.EXE /INITIALIZE'
ExecWinApp2='XPER-SP.EXE /INITIALIZE'
ExecWinApp3='XPER-SPX.EXE /INITIALIZE'
[C-Pack]
; XperCASE(C)-Package
ApplicationName='XperCASE'
SetupName='XperCASE(C-Pack) - Setup'
SetupWindowTitle='XperCASE - Setup'
UserName=
ComponentInfo1='SD 350 310'
ComponentInfo2='SP 350 310'
ComponentInfo3='C 350 310'
Examples=yes
CopyExamples=yes
SourcePath=
DestinationPath='C:\XPER'
ExamplePath='C:\XPER\SAMPLES'
MinDiskSpaceSystem=550
MinDiskSpaceProgram=1700
MinDiskSpaceExamples=120
; DefaultSourceEditor=
; SourceEditorKey=
; DefaultDataPoolName=
; DataPoolKey=
DefaultProgmanGroup='SIEMENS XperCASE'
FileTransfer=no
FileTransferKey='FtAvailable'
SystemFile1='1:COMMDLG.DLL'
SystemFile2='1:OLESVR.DLL'
SystemFile3='1:OLECLI.DLL'
SystemFile4='1:SHELL.DLL'
WindowsFile1='1:WINHELP.EXE'
WindowsFile2='1:WINHELP.HLP'
ProgramFile1='1:XPER-INI.DLL'
ProgramFile2='1:XPER-FTL.DLL'
ProgramFile3='1:XPER-SD.EXE'
ProgramFile4='1:XPER-SD.HLP'
ProgramFile5='1:XPER-DD.EXE'
ProgramFile6='1:XPER-SP.EXE'
ProgramFile7='2:XPER-SP.HLP'
ProgramFile8='2:XPER-C.EXE'
ProgramFile9='2:XPER-C.HLP'
ProgramFile10='2:XPER-RE.EXE'
ProgramFile11='2:WINNOP.EXE'
PifFile1='1:XPER-DD.PIF'
PifFile2='1:XPER-FTP.PIF'
PifFile3='1:XPER-RE.PIF'
ExampleFile1='*.SD'
ExampleFile2='*.SDE'
ExampleFile3='*.SDZ'
ExampleFile4='*.DBT'
ExampleFile5='*.SP_'
ExampleFile6='*.C_'
ExampleFile7='STDNE?.*'
; WinIniEntry1='[extensions] c=xper-c.exe ^.c'
; WinIniEntry2='[extensions] sp=xper-sp.exe ^.sp'
; WinIniEntry3='[extensions] sd=xper-sd.exe ^.sd'
; WinIniEntry4='[extensions] sde=xper-sd.exe ^.sd'
; WinIniEntry5='[extensions] sdz=xper-sd.exe ^.sd'
; WinIniEntry6='[extensions] dbt=xper-sd.exe ^.sd'
IniFileEntry1='XPER-SD.INI [Settings] ReportHeader='%PR% %->% %##%''
IniFileEntry2='XPER-SP.INI [Settings] FtAvailable=???'
IniFileEntry3='XPER-C.INI [Settings] FtAvailable=???'
DelWinIniEntry1='[extensions] c'
DelWinIniEntry2='[extensions] sp'
DelWinIniEntry3='[extensions] sd'
DelWinIniEntry4='[extensions] sde'
DelWinIniEntry5='[extensions] sdz'
DelWinIniEntry6='[extensions] dbt'
DelWinIniEntry7='[embedding] xperc'
DelWinIniEntry8='[embedding] xpersp'
DelRegDataEntry1='.c'
DelRegDataEntry2='.sp'
DelRegDataEntry3='xperc'
DelRegDataEntry4='xpersp'
ProgManEntry1='XperCASE(SD):xper-sd.exe'
ProgManEntry2='XperCASE(SP):xper-sp.exe'
ProgManEntry3='XperCASE(C):xper-c.exe'
NetUserFile1='2:XPER-SD.USR!XPER-SD.INI'
NetUserFile2='2:XPER-SP.USR!XPER-SP.INI'
NetUserFile3='2:XPER-C.USR!XPER-C.INI'
ExecWinApp1='XPER-SD.EXE /INITIALIZE'
ExecWinApp2='XPER-SP.EXE /INITIALIZE'
ExecWinApp3='XPER-C.EXE /INITIALIZE'
[COB-Pack]
; XperCASE(COB)-Package
ApplicationName='XperCASE'
SetupName='XperCASE(COB-Pack) - Setup'
SetupWindowTitle='XperCASE - Setup'
UserName=
ComponentInfo1='SD 350 310'
ComponentInfo2='SP 350 310'
ComponentInfo3='COB 350 310'
Examples=yes
CopyExamples=yes
SourcePath=
DestinationPath='C:\XPER'
ExamplePath='C:\XPER\SAMPLES'
MinDiskSpaceSystem=550
MinDiskSpaceProgram=2000
MinDiskSpaceExamples=220
DefaultSourceEditor='NOTEPAD.EXE %FN%'
SourceEditorKey='SourceEditor'
; DefaultDataPoolName=
; DataPoolKey=
DefaultProgmanGroup='SIEMENS XperCASE'
FileTransfer=no
FileTransferKey='FtAvailable'
SystemFile1='1:COMMDLG.DLL'
SystemFile2='1:OLESVR.DLL'
SystemFile3='1:OLECLI.DLL'
SystemFile4='1:SHELL.DLL'
WindowsFile1='1:WINHELP.EXE'
WindowsFile2='1:WINHELP.HLP'
ProgramFile1='1:XPER-INI.DLL'
ProgramFile2='1:XPER-FTL.DLL'
ProgramFile3='1:XPER-SD.EXE'
ProgramFile4='1:XPER-SD.HLP'
ProgramFile5='1:XPER-DD.EXE'
ProgramFile6='1:XPER-SP.EXE'
ProgramFile7='2:XPER-SP.HLP'
ProgramFile8='2:XPER-COB.EXE'
ProgramFile9='2:XPER-COB.HLP'
ProgramFile10='2:XPER-PAR.DLL'
ProgramFile11='2:ERRMSG.DAT'
ProgramFile12='2:XPER-RE.EXE'
ProgramFile13='2:WINNOP.EXE'
PifFile1='1:XPER-DD.PIF'
PifFile2='1:XPER-FTP.PIF'
PifFile3='1:XPER-RE.PIF'
ExampleFile1='*.SD'
ExampleFile2='*.SDE'
ExampleFile3='*.SDZ'
ExampleFile4='*.DBT'
ExampleFile5='*.SP_'
ExampleFile6='*.EC_'
ExampleFile7='*.CO_'
ExampleFile8='STDNE?.*'
; WinIniEntry1='[extensions] cob=xper-cob.exe ^.cob'
; WinIniEntry2='[extensions] ecb=xper-cob.exe ^.ecb'
; WinIniEntry3='[extensions] sp=xper-sp.exe ^.sp'
; WinIniEntry4='[extensions] sd=xper-sd.exe ^.sd'
; WinIniEntry5='[extensions] sde=xper-sd.exe ^.sd'
; WinIniEntry6='[extensions] sdz=xper-sd.exe ^.sd'
; WinIniEntry7='[extensions] dbt=xper-sd.exe ^.sd'
IniFileEntry1='XPER-COB.INI [Settings] SourceEditor=???'
IniFileEntry2='XPER-COB.INI [Settings] Compiler=none'
IniFileEntry3='XPER-SD.INI [Settings] ReportHeader='%PR% %->% %##%''
IniFileEntry4='XPER-SP.INI [Settings] FtAvailable=???'
IniFileEntry5='XPER-COB.INI [Settings] FtAvailable=???'
DelWinIniEntry1='[extensions] cob'
DelWinIniEntry2='[extensions] ecb'
DelWinIniEntry3='[extensions] sp'
DelWinIniEntry4='[extensions] sd'
DelWinIniEntry5='[extensions] sde'
DelWinIniEntry6='[extensions] sdz'
DelWinIniEntry7='[extensions] dbt'
DelWinIniEntry8='[embedding] xpercob'
DelWinIniEntry9='[embedding] xpercobsource'
DelWinIniEntry10='[embedding] xpersp'
DelRegDataEntry1='.cob'
DelRegDataEntry2='.ecb'
DelRegDataEntry3='.sp'
DelRegDataEntry4='xpercobsource'
DelRegDataEntry5='xpercob'
DelRegDataEntry6='xpersp'
ProgManEntry1='XperCASE(SD):xper-sd.exe'
ProgManEntry2='XperCASE(SP):xper-sp.exe'
ProgManEntry3='XperCASE(COB):xper-cob.exe'
NetUserFile1='2:XPER-SD.USR!XPER-SD.INI'
NetUserFile2='2:XPER-SP.USR!XPER-SP.INI'
NetUserFile3='2:XPER-COB.USR!XPER-COB.INI'
ExecWinApp1='XPER-SD.EXE /INITIALIZE'
ExecWinApp2='XPER-SP.EXE /INITIALIZE'
ExecWinApp3='XPER-COB.EXE /INITIALIZE'
[COL-Pack]
; XperCASE(COL)-Package
ApplicationName='XperCASE'
SetupName='XperCASE(COL-Pack) - Setup'
SetupWindowTitle='XperCASE - Setup'
UserName=
ComponentInfo1='SD 350 310'
ComponentInfo2='SP 350 310'
ComponentInfo3='COL 350 310'
Examples=yes
CopyExamples=yes
SourcePath=
DestinationPath='C:\XPER'
ExamplePath='C:\XPER\SAMPLES'
MinDiskSpaceSystem=550
MinDiskSpaceProgram=1725
MinDiskSpaceExamples=120
; DefaultSourceEditor=
; SourceEditorKey=
; DefaultDataPoolName=
; DataPoolKey=
DefaultProgmanGroup='SIEMENS XperCASE'
FileTransfer=yes
FileTransferKey='FtAvailable'
SystemFile1='1:COMMDLG.DLL'
SystemFile2='1:OLESVR.DLL'
SystemFile3='1:OLECLI.DLL'
SystemFile4='1:SHELL.DLL'
WindowsFile1='1:WINHELP.EXE'
WindowsFile2='1:WINHELP.HLP'
ProgramFile1='1:XPER-INI.DLL'
ProgramFile2='1:XPER-FTL.DLL'
ProgramFile3='1:XPER-SD.EXE'
ProgramFile4='1:XPER-SD.HLP'
ProgramFile5='1:XPER-DD.EXE'
ProgramFile6='1:XPER-SP.EXE'
ProgramFile7='2:XPER-SP.HLP'
ProgramFile8='2:XPER-COL.EXE'
ProgramFile9='2:XPER-COL.HLP'
ProgramFile10='2:XPER-RE.EXE'
ProgramFile11='2:WINNOP.EXE'
PifFile1='1:XPER-DD.PIF'
PifFile2='1:XPER-FTP.PIF'
PifFile3='1:XPER-RE.PIF'
ExampleFile1='*.SD'
ExampleFile2='*.SDE'
ExampleFile3='*.SDZ'
ExampleFile4='*.DBT'
ExampleFile5='*.SP_'
ExampleFile6='*.CO_'
ExampleFile7='STDNE?.*'
; WinIniEntry1='[extensions] col=xper-col.exe ^.col'
; WinIniEntry2='[extensions] sp=xper-sp.exe ^.sp'
; WinIniEntry3='[extensions] sd=xper-sd.exe ^.sd'
; WinIniEntry4='[extensions] sde=xper-sd.exe ^.sd'
; WinIniEntry5='[extensions] sdz=xper-sd.exe ^.sd'
; WinIniEntry6='[extensions] dbt=xper-sd.exe ^.sd'
IniFileEntry1='XPER-SD.INI [Settings] ReportHeader='%PR% %->% %##%''
IniFileEntry2='XPER-SP.INI [Settings] FtAvailable=???'
IniFileEntry3='XPER-COL.INI [Settings] FtAvailable=???'
DelWinIniEntry1='[extensions] col'
DelWinIniEntry2='[extensions] sp'
DelWinIniEntry3='[extensions] sd'
DelWinIniEntry4='[extensions] sde'
DelWinIniEntry5='[extensions] sdz'
DelWinIniEntry6='[extensions] dbt'
DelWinIniEntry7='[embedding] xpercol'
DelWinIniEntry8='[embedding] xpersp'
DelRegDataEntry1='.col'
DelRegDataEntry2='.sp'
DelRegDataEntry3='xpercol'
DelRegDataEntry4='xpersp'
ProgManEntry1='XperCASE(SD):xper-sd.exe'
ProgManEntry2='XperCASE(SP):xper-sp.exe'
ProgManEntry3='XperCASE(COL):xper-col.exe'
NetUserFile1='2:XPER-SD.USR!XPER-SD.INI'
NetUserFile2='2:XPER-SP.USR!XPER-SP.INI'
NetUserFile3='2:XPER-COL.USR!XPER-COL.INI'
ExecWinApp1='XPER-SD.EXE /INITIALIZE'
ExecWinApp2='XPER-SP.EXE /INITIALIZE'
ExecWinApp3='XPER-COL.EXE /INITIALIZE'
[COL2COB-Pack]
; XperCASE(COB)
ApplicationName='XperCASE'
SetupName='XperCASE(COL/COB) - Setup'
SetupWindowTitle='XperCASE - Setup'
UserName=
ComponentInfo1='COB 350 310'
ComponentInfo2='COL 350 310'
Examples=yes
CopyExamples=yes
SourcePath=
DestinationPath='C:\XPER'
ExamplePath='C:\XPER\SAMPLES'
MinDiskSpaceSystem=550
MinDiskSpaceProgram=1700
MinDiskSpaceExamples=200
DefaultSourceEditor='NOTEPAD.EXE %FN%'
SourceEditorKey='SourceEditor'
; DefaultDataPoolName=
; DataPoolKey=
DefaultProgmanGroup='SIEMENS XperCASE'
FileTransfer=yes
FileTransferKey='FtAvailable'
SystemFile1='1:COMMDLG.DLL'
SystemFile2='1:OLESVR.DLL'
SystemFile3='1:OLECLI.DLL'
SystemFile4='1:SHELL.DLL'
WindowsFile1='1:WINHELP.EXE'
WindowsFile2='1:WINHELP.HLP'
ProgramFile1='1:XPER-INI.DLL'
ProgramFile2='1:XPER-FTL.DLL'
ProgramFile3='1:XPER-COL.EXE'
ProgramFile4='1:XPER-COL.HLP'
ProgramFile5='2:XPER-COB.EXE'
ProgramFile6='2:XPER-COB.HLP'
ProgramFile7='2:XPER-PAR.DLL'
ProgramFile8='2:ERRMSG.DAT'
ProgramFile9='2:XPER-RE.EXE'
ProgramFile10='2:WINNOP.EXE'
PifFile1='1:XPER-FTP.PIF'
PifFile2='1:XPER-RE.PIF'
ExampleFile1='*.EC_'
ExampleFile2='*.CO_'
ExampleFile3='*.COL'
ExampleFile4='*.SP_'
; WinIniEntry1='[extensions] cob=xper-cob.exe ^.cob'
; WinIniEntry2='[extensions] ecb=xper-cob.exe ^.ecb'
; WinIniEntry3='[extensions] col=xper-col.exe ^.col'
IniFileEntry1='XPER-COB.INI [Settings] SourceEditor=???'
IniFileEntry2='XPER-COB.INI [Settings] Compiler=none'
IniFileEntry3='XPER-COB.INI [Settings] FtAvailable=???'
IniFileEntry4='XPER-COL.INI [Settings] FtAvailable=???'
DelWinIniEntry1='[extensions] cob'
DelWinIniEntry2='[extensions] ecb'
DelWinIniEntry3='[extensions] col'
DelWinIniEntry4='[embedding] xpercob'
DelWinIniEntry5='[embedding] xpercobsource'
DelWinIniEntry6='[embedding] xpercol'
DelRegDataEntry1='.cob'
DelRegDataEntry2='.ecb'
DelRegDataEntry3='.col'
DelRegDataEntry4='xpercob'
DelRegDataEntry5='xpercobsource'
DelRegDataEntry6='xpercol'
ProgManEntry1='XperCASE(COB):xper-cob.exe'
ProgManEntry2='XperCASE(COL):xper-col.exe'
NetUserFile1='2:XPER-COB.USR!XPER-COB.INI'
NetUserFile2='2:XPER-COL.USR!XPER-COL.INI'
ExecWinApp1='XPER-COB.EXE /INITIALIZE'
ExecWinApp2='XPER-COL.EXE /INITIALIZE'
[COB-mbp]
; XperCASE(COB) mbp-specific
; Overrides [COB] if mbp-specific setup!
; (Differences only in DefaultSourceEditor and Compiler=VISCOB)
; ApplicationName='XperCASE(COB)'
; SetupName='XperCASE(COB) - Setup'
; SetupWindowTitle='XperCASE(COB) - Setup'
; UserName=
; ComponentInfo1='COB 350 310'
; Examples=yes
; CopyExamples=yes
; SourcePath=
; DestinationPath='C:\XPER'
; ExamplePath='C:\XPER\SAMPLES'
; MinDiskSpaceSystem=550
; MinDiskSpaceProgram=1030
; MinDiskSpaceExamples=150
DefaultSourceEditor='VCEDIT.PIF %FN% -%LN%'
; SourceEditorKey='SourceEditor'
; ; DefaultDataPoolName=
; ; DataPoolKey=
; DefaultProgmanGroup='SIEMENS XperCASE'
; FileTransfer=no
; FileTransferKey='FtAvailable'
IniFileEntry2='XPER-COB.INI [Settings] Compiler=VISCOB'
[COB-Pack-mbp]
; XperCASE(COB)-Package mbp-specific
; Overrides [COB-Pack] if mbp-specific setup!
; (Differences only in DefaultSourceEditor and Compiler=VISCOB)
; ApplicationName='XperCASE'
; SetupName='XperCASE - Setup'
; SetupWindowTitle='XperCASE - Setup'
; UserName=
; ComponentInfo1='COB 350 310'
; Examples=yes
; CopyExamples=yes
; SourcePath=
; DestinationPath='C:\XPER'
; ExamplePath='C:\XPER\SAMPLES'
; MinDiskSpaceSystem=550
; MinDiskSpaceProgram=2000
; MinDiskSpaceExamples=220
DefaultSourceEditor='VCEDIT.PIF %FN% -%LN%'
; SourceEditorKey='SourceEditor'
; ; DefaultDataPoolName=
; ; DataPoolKey=
; DefaultProgmanGroup='SIEMENS XperCASE'
; FileTransfer=no
; FileTransferKey='FtAvailable'
IniFileEntry2='XPER-COB.INI [Settings] Compiler=VISCOB'
[JET-HLOI]
; XperCASE(JET) HLOI-specific
; Overrides [JET] if HLOI-specific setup!
; (Differences only in DeleteWorkFiles=yes and XPERJETU.*)
; ApplicationName='XperCASE(JET)'
; SetupName='XperCASE(JET) - Setup'
; SetupWindowTitle='XperCASE(JET) - Setup'
; UserName=
; ComponentInfo1='JET 350 310'
; Examples=yes
; CopyExamples=yes
; SourcePath=
; DestinationPath='C:\XPER'
; ExamplePath='C:\XPER\SAMPLES'
; MinDiskSpaceSystem=550
MinDiskSpaceProgram=2050
; MinDiskSpaceExamples=20
; ; DefaultSourceEditor=
; ; SourceEditorKey=
; DefaultDataPoolName='$A.B0X085X'
; DataPoolKey='DataPool'
; DefaultProgmanGroup='SIEMENS XperCASE'
; FileTransfer=yes
; FileTransferKey='FtAvailable'
ProgramFile8='2:XPERJETU.EXE'
PifFile3='1:XPERJETU.PIF'
IniFileEntry3='XPER-JET.INI [Settings] JobLog=no'
IniFileEntry4='XPER-JET.INI [Settings] DeleteWorkFiles=yes'
[ALL]
; Install all XperCASE - components
ApplicationName='XperCASE'
SetupName='XperCASE - Setup'
SetupWindowTitle='XperCASE - Setup'
UserName=
ComponentInfo1='SD 350 310'
ComponentInfo2='SP 350 310'
ComponentInfo3='SPX 350 310'
ComponentInfo4='C 350 310'
ComponentInfo5='COB 350 310'
ComponentInfo6='COL 350 310'
ComponentInfo7='JET 350 310'
Examples=yes
CopyExamples=yes
SourcePath=
DestinationPath='C:\XPER'
ExamplePath='C:\XPER\SAMPLES'
MinDiskSpaceSystem=550
MinDiskSpaceProgram=5839
MinDiskSpaceExamples=854
DefaultSourceEditor='NOTEPAD.EXE %FN%'
SourceEditorKey='SourceEditor'
DefaultDataPoolName='$A.B0X085X'
DataPoolKey='DataPool'
DefaultProgmanGroup='SIEMENS XperCASE'
FileTransfer=yes
FileTransferKey='FtAvailable'
SystemFile1='1:COMMDLG.DLL'
SystemFile2='1:OLESVR.DLL'
SystemFile3='1:OLECLI.DLL'
SystemFile4='1:SHELL.DLL'
WindowsFile1='1:WINHELP.EXE'
WindowsFile2='1:WINHELP.HLP'
ProgramFile1='1:XPER-INI.DLL'
ProgramFile2='1:XPER-FTL.DLL'
ProgramFile3='1:XPER-SD.EXE'
ProgramFile4='1:XPER-SD.HLP'
ProgramFile5='1:XPER-DD.EXE'
ProgramFile6='1:XPER-SP.EXE'
ProgramFile7='2:XPER-SP.HLP'
ProgramFile8='2:XPER-SPX.EXE'
ProgramFile9='2:XPER-SPX.HLP'
ProgramFile10='2:XPER-C.EXE'
ProgramFile11='2:XPER-C.HLP'
ProgramFile12='2:XPER-COB.EXE'
ProgramFile13='3:XPER-COB.HLP'
ProgramFile14='3:XPER-PAR.DLL'
ProgramFile15='3:ERRMSG.DAT'
ProgramFile16='3:XPER-COL.EXE'
ProgramFile17='3:XPER-COL.HLP'
ProgramFile18='3:XPER-JET.EXE'
ProgramFile19='4:XPER-JET.HLP'
ProgramFile20='4:XPER-JET.SDF'
ProgramFile21='4:XPER-RE.EXE'
ProgramFile22='4:WINNOP.EXE'
PifFile1='1:XPER-DD.PIF'
PifFile2='1:XPER-FTP.PIF'
PifFile3='1:XPER-RE.PIF'
ExampleFile1='SDSPSPX\*.*'
ExampleFile2='SDSPC\*.*'
ExampleFile3='SDSPCOB\*.*'
ExampleFile4='SDSPCOL\*.*'
ExampleFile5='SPX-4GL\*.* /S'
ExampleFile6='SPX-ADA\*.* /S'
ExampleFile7='SPX-BAS\*.* /S'
ExampleFile8='SPX-CHIL\*.* /S'
ExampleFile9='SPX-CLP\*.* /S'
ExampleFile10='SPX-CPP\*.* /S'
ExampleFile11='SPX-DBAS\*.* /S'
ExampleFile12='SPX-FORT\*.* /S'
ExampleFile13='SPX-MOD2\*.* /S'
ExampleFile14='SPX-NAT\*.* /S'
ExampleFile15='SPX-PAS\*.* /S'
ExampleFile16='SPX-PL1\*.* /S'
ExampleFile17='SPX-SPL4\*.* /S'
IniFileEntry1='XPER-SD.INI [Settings] ReportHeader='%PR% %->% %##%''
IniFileEntry2='XPER-SP.INI [Settings] FtAvailable=???'
IniFileEntry3='XPER-SPX.INI [Settings] FtAvailable=???'
IniFileEntry4='XPER-C.INI [Settings] FtAvailable=???'
IniFileEntry5='XPER-COB.INI [Settings] SourceEditor=???'
IniFileEntry6='XPER-COB.INI [Settings] Compiler=none'
IniFileEntry7='XPER-COB.INI [Settings] FtAvailable=???'
IniFileEntry8='XPER-COL.INI [Settings] FtAvailable=???'
IniFileEntry9='XPER-JET.INI [Settings] DataPool=???'
IniFileEntry10='XPER-JET.INI [Settings] FtAvailable=???'
IniFileEntry11='XPER-JET.INI [Settings] JobLog=no'
IniFileEntry12='XPER-JET.INI [Settings] DeleteWorkFiles=no'
DelWinIniEntry1='[extensions] spx'
DelWinIniEntry2='[extensions] sp'
DelWinIniEntry3='[extensions] sd'
DelWinIniEntry4='[extensions] sde'
DelWinIniEntry5='[extensions] sdz'
DelWinIniEntry6='[extensions] dbt'
DelWinIniEntry7='[extensions] c'
DelWinIniEntry8='[extensions] cob'
DelWinIniEntry9='[extensions] ecb'
DelWinIniEntry10='[extensions] col'
DelWinIniEntry11='[extensions] jet'
DelWinIniEntry12='[embedding] xperspx'
DelWinIniEntry13='[embedding] xpersp'
DelWinIniEntry14='[embedding] xperc'
DelWinIniEntry15='[embedding] xpercob'
DelWinIniEntry16='[embedding] xpercobsource'
DelWinIniEntry17='[embedding] xpercol'
DelWinIniEntry18='[embedding] xperjet'
DelRegDataEntry1='.spx'
DelRegDataEntry2='.sp'
DelRegDataEntry3='.c'
DelRegDataEntry4='.cob'
DelRegDataEntry5='.ecb'
DelRegDataEntry6='.col'
DelRegDataEntry7='.jet'
DelRegDataEntry8='xperspx'
DelRegDataEntry9='xpersp'
DelRegDataEntry10='xperc'
DelRegDataEntry11='xpercob'
DelRegDataEntry12='xpercobsource'
DelRegDataEntry13='xpercol'
DelRegDataEntry14='xperjet'
ProgManEntry1='XperCASE(SD):xper-sd.exe'
ProgManEntry2='XperCASE(SP):xper-sp.exe'
ProgManEntry3='XperCASE(SPX):xper-spx.exe'
ProgManEntry4='XperCASE(C):xper-c.exe'
ProgManEntry5='XperCASE(COB):xper-cob.exe'
ProgManEntry6='XperCASE(COL):xper-col.exe'
ProgManEntry7='XperCASE(JET):xper-jet.exe'
NetUserFile1='4:XPER-SD.USR!XPER-SD.INI'
NetUserFile2='4:XPER-SP.USR!XPER-SP.INI'
NetUserFile3='4:XPER-SPX.USR!XPER-SPX.INI'
NetUserFile4='4:XPER-C.USR!XPER-C.INI'
NetUserFile5='4:XPER-COB.USR!XPER-COB.INI'
NetUserFile6='4:XPER-COL.USR!XPER-COL.INI'
NetUserFile7='4:XPER-JET.USR!XPER-JET.INI'
ExecWinApp1='XPER-SD.EXE /INITIALIZE'
ExecWinApp2='XPER-SP.EXE /INITIALIZE'
ExecWinApp3='XPER-SPX.EXE /INITIALIZE'
ExecWinApp4='XPER-C.EXE /INITIALIZE'
ExecWinApp5='XPER-COB.EXE /INITIALIZE'
ExecWinApp6='XPER-COL.EXE /INITIALIZE'
ExecWinApp7='XPER-JET.EXE /INITIALIZE'
[LicPackSetup]
; Section to make only the licencepackage-setup.
; All available XperCASE-components must be listed here.
; Components with 0 users installed will be not displayed.
ApplicationName='XperCASE-License packages'
SetupName='XperCASE-Setup'
SetupWindowTitle='XperCASE-Setup'
DestinationPath='C:\XPER'
ComponentInfo1='SD 350 310'
ComponentInfo2='SP 350 310'
ComponentInfo3='SPX 350 310'
ComponentInfo4='C 350 310'
ComponentInfo5='COB 350 310'
ComponentInfo6='COL 350 310'
ComponentInfo7='JET 350 310'