Simtel MSDOS 1992 June

home *** CD-ROM | disk | FTP | other *** search

/ Simtel MSDOS 1992 June / SIMTEL_0692.cdr / msdos / printer / prtlabl5.arc / PRTLABEL.DOC < prev next >

Wrap

Text File | 1989-01-04 | 44.9 KB | 1,258 lines

PrtLabel Version 5.0 December 1988 (c) COPYRIGHT 1988 - All Rights Reserved MUSTANG SOFTWARE 3125 19th Street, Suite 162 Bakersfield, CA 93301-3118 (805) 395-0223 ┌─────────┐ ┌─────┴───┐ │ ──│ │o │────────────────── │ ┌─────┴╨──┐ │ Association of │ │ │─┘ Shareware └───│ o │ Professionals ──────│ ║ │──────────────────── └────╨────┘ MEMBER PrtLabel ver. 5.0 ----------------------------------------------------------------- Limited Warranty Mustang Software warrants to the original purchaser and licensee of a registered product that the program disk(s) on which the program is recorded be free from defects in materials and workmanship under normal use and service for a period of ninety (90) days from the date of delivery as evidenced by a copy of your receipt. Mustang Software's entire liability and your exclusive remedy shall be replacement of the disk not meeting Mustang Software's Limited Warranty if returned to Mustang Software during the 90 day period. Except for the foregoing, this product is provided "as is" without warranty of any kind. The entire risk as to the results and performance of the program is assumed by you. Mustang Software does not warrant, guarantee, or make any representations regarding the use of, results of, merchantability or fitness for a particular use of the product. Should the program prove defective, you (and not Mustang Software or it's dealers) assume the entire cost of all necessary servicing, repair or correction. Further, Mustang Software does not warrant, guarantee, or make any representations regarding the use of, or the results of the use of the program in terms of correctness, accuracy, reliability, currentness, or otherwise; and you rely on the program and results solely at your own risk. Mustang Software will not be liable for any damages, including but not limited to system damage, service, repair, correction, loss of profit, lost savings, or any other incidental, consequential, or special damages of any nature whatsoever resulting from the use or inability to use this product. Copyright PrtLabel is copyrighted by Mustang Software. All rights reserved. Regardless of the method of marketing used, PrtLabel is NOT in the "Public Domain", and this version and it's documentation is covered by that copyright. Copying, duplicating, selling or otherwise distributing this product except as indicated above is a violation of the law. -------------- 2 PrtLabel ver. 5.0 ----------------------------------------------------------------- SHAREWARE MARKETING What is shareware? Shareware is a marketing concept in which copyrighted software products are distributed by allowing duplication of the program for evaluation by interested parties. The program developer receives payment from the users after they have determined that the product meets their needs. The motivations for making payment for a shareware program are honest payment for a valuable software tool, desire for support, updates, enhancements and documentation, and finally to help encourage shareware authors to produce additional quality programs. What happens when I register? Mustang Software believes that a registration of one of our shareware products is a commitment of support from an end user. Every registration of every Mustang Software product is followed by an immediate acknowledgment and shipment of the latest version of the program and documentation. Orders are shipped UPS 2nd day air on the same day payment is received. Registered users are placed on our mailing list and receive automatic notifications of all updates and future product releases. Will my registration matter? YES! Mustang Software employs programming, technical support and administrative staff on a FULL TIME basis. Your registration ensures that we can continue to grow, improve our product, and be here when you call for support. Without registrations we could not remain in business to SERVE YOU! If PrtLabel meets your needs as a label printing utility, we encourage you to support the shareware concept by sending in your registration. See the Registration form at the end of this documentation for details. You may make as many copies of PrtLabel as you wish, give the program to anyone you wish, but you may not sell it. If you find the program useful and you continue to use it, you must make payment of $25.00 to Mustang Software. Site licenses and a network version are available if needed, call for details. You may not alter, decompile, disassemble, or reverse-engineer the Software, remove or obscure the Mustang Software copyright and trademark notices, or take any action which would in any way be in derogation of the proprietary rights of Mustang Software to the program or related materials. -------------- 3 PrtLabel ver. 5.0 ----------------------------------------------------------------- REQUIREMENTS IBM or compatible computer 256K of memory 1 diskette drive of any kind Monochrome or color display Any type Printer (note that fonts are printer dependent) ------------------------------------------------- OVERVIEW & INSTALLATION PrtLabel is an easy to use, menu driven utility which will print labels in a variety of formats. You simply tell PrtLabel the size and shape of the label and type in the text you want printed. You can easily include special fonts anywhere in your text such as condensed, double wide or italics. Want a border around your message? Go ahead and select from 4 border line types and simply draw it with the cursor keys! When you're done don't forget to save your label creation for selection later from the "Label Directory". PrtLabel even has an option to sequentially number each label for serialization applications. PrtLabel works with virtually any printer, although special fonts may be limited by your printer's capabilities. PrtLabel includes a number of pre-coded printer definitions, and allows custom printer definitions to be added and saved as desired. The first thing you should do to install Prtlabel is use the DOS Diskcopy command to make a backup of your original PrtLabel master diskette. You may use the copied disk as your working disk, or if you have a hard disk you may copy the entire contents of the master diskette to a subdirectory of your choice on your hard disk. It is important to keep ALL of the Prtlabel files together since several PrtLabel features look for specific support files in the same directory as the main program files. Once you have created a working copy of the program, change to the proper drive and subdirectory for the working copy and type PrtLabel at the DOS prompt. This documentation will review the complete operation of PrtLabel in detail. If you feel comfortable using your computer and -------------- 4 PrtLabel ver. 5.0 ----------------------------------------------------------------- printer, you will probably be able to run the program and refer to this file as a reference item as needed. PrtLabel includes extensive context sensitive help which is available anytime by pressing the F1 key. Pressing F1 a second time presents an index of help topics available. Within a particular HELP screen you may see other help topics which are displayed in a different color or as highlighted characters. Use the arrow keys to select other help topics as desired. -------------- 5 PrtLabel ver. 5.0 ----------------------------------------------------------------- SETUP The first screen in PrtLabel presents you with four choices, two of which have a direct bearing on how your labels will print and what kind of labels you are using. Menu selections are made by moving the highlight bar over the item desired and pressing ENTER, or by simply pressing the highlighted letter for the command option desired regardless of the highlight bar position. The first thing you need to do after starting PrtLabel is to set up the program to work properly with your printer. Select PRINTER SETUP by pressing "P" which will display the PrtLabel Printer Setup Menu. Although this menu may look complicated and technical, you will find that for most users the setup process simply requires choosing a printer name from a pre-defined list. Printer selection begins with Loading a printer setup using the F2 key as indicated in the lower portion of the screen. F2 displays a window showing all files in the current directory with the extension .PRN, which indicates a PrtLabel Printer Definition File. The printers in the following list are pre- defined and can be installed by highlighting the appropriate name. Note that the codes for Double-Wide print are not included in printer definitions even for printers which may support that capability. An asterisk (*) in the font field indicates that a printer may support a font, but the font codes are not entered since the codes were not known when the definitions were compiled. You may add the proper codes from your printer manual if desired. See the section on PRinter Setup later in this documentation. PRINTER NAME DEF FILE BOLD COND ITAL DOUB UNDER ================================================================= ANADEX DP-9501A ANAD9501 N Y N N Y ANADEX DP-9620B ANAD9620 N Y N N Y BROTHER EXEC-70 BRO-EX70 N N N N Y BROTHER HR-15 BRO-HR15 Y N N N Y BROTHER HR-25 BRO-HR25 Y N N N Y CITIZEN MSP CIT-MSP Y Y Y * Y C-ITOH F10 SERIES ITOH-F10 Y N N N Y C-ITOH M1550 ITOH1550 Y Y N * Y C-ITOH PROWRITER ITOH-PRO Y Y N * Y COMRITER I COMRIT1 N Y N N N COMRITER II COMRIT2 Y Y N N Y -------------- 6 PrtLabel ver. 5.0 ----------------------------------------------------------------- PRINTER NAME DEF FILE BOLD COND ITAL DOUB UNDER ================================================================= DATASOUTH DS180 DATA-180 N Y N N N DEC LA100 DEC-100 Y Y N * Y DEC LA210 DEC-210 Y Y N * Y DEC LA50 DEC-50 Y Y N * Y DIABLO 630 DIABL630 Y N N N Y DP 8070 DP-8070 Y Y N * Y EPSON FX-80 FX-80 Y Y Y * Y EPSON FX-100 FX-100 Y Y Y * Y EPSON LQ-1500 LQ-1500 Y Y Y * Y EPSON MX-80 MX-80 Y Y Y * Y EPSON MX-100 MX-100 Y Y Y * Y HP LASER SERIES II HP-LASER Y Y N N Y HP THINKJET HP-THINK Y Y N * Y IBM COLOR PRINTER IBM-COLR Y Y N * Y IBM GRAPHICS IBM-GRAF Y Y N * Y IBM PROPRINTER IBM-PRO Y Y Y * Y IBM QUIETWRITER IBM-QWR N N N N Y IBM 5216 WHEEL IBM-5216 N N N N Y IDS PRISM IDS-PRSM Y Y N * N MANNESMAN MT160 MANN-160 Y Y N * Y MANNESMAN MT180 MANN-180 Y Y N * Y NEC 2050 NEC-2050 Y N N N Y NEC 3530 NEC-3530 Y N N N Y NEC 3550 NEC-3550 Y N N N Y NEC P-3 NEC-P3 Y Y N * Y NEC PINWRITER NEC-PIN Y Y N * N OKIDATA 192 OKI-192 Y Y N * * OKIDATA 83 OKI-83 N Y N * N OKIDATA 84 OKI-84 Y Y N * Y OKIDATA ML92,93 OKI-ML Y Y N * N OKIDATA 93 OKI-93 Y Y N * Y OKIDATA 2410 OKI-2410 Y Y N * Y PRIMAGE 90 PRIM-90 Y Y Y * Y PRINTEK 900 PRINTEK N Y N * Y QUME QUME Y N N N Y RADIX 10/15 RADIX Y Y Y * Y SMITH-CORONA D-300 CORONA Y Y Y * Y SILVER REED 770 SIL-REED Y Y Y * Y STAR DELTA 15 STAR-DEL Y Y Y * Y TOSHIBA P350 TOSH-350 Y Y Y * Y TOSHIBA P1350 TOSH1350 N N N N Y TOSHIBA P1351 TOSH1351 N Y N * Y VARIFLEX S700 VARI-700 Y N N N Y XEROX MEM610C1 XER-610 Y N N N Y XEROX P101 XER-P101 Y Y N * Y -------------- 7 PrtLabel ver. 5.0 ----------------------------------------------------------------- As indicated previously, you may add or modify the codes in this screen if desired. For complete details of printer code modification please see PRINTER SETUP MODIFICATION later in the manual. After selecting your printer, press the SAVE key F3 and save the settings using the printer name "DEFAULT". This creates the printer definition file named DEFAULT.PRN which is used by PrtLabel when labels are printed. -------------- 8 PrtLabel ver. 5.0 ----------------------------------------------------------------- MAIN MENU PrtLabel's Main Menu offers four choices which are used to enter label information, set up your printer, get information on our products and to exit the PrtLabel program. Menu choices are made by moving the highlight bar over the desired item and pressing ENTER or by pressing the highlighted choice letter. DEFINE LABEL This choice displays the main label definition screen. This single screen is used to perform all label functions including loading, saving and printing. You use it to determine the size, shape, text and attributes for the labels to be printed. When DEFINE LABEL is first selected the cursor is positioned in the lower portion of the screen to begin the label parameter definition. Number of Labels - This field tells Prtlabel how many labels will be printed. Any number between 1 and 9,999 may be entered. Height of Labels - This field represents the number of lines to be printed on each label. Standard 3 1/2" x 15/16" labels are 6 lines "high". Always enter the number of PRINTED lines that will fit on a label. PrtLabel will accept a number between 2 and 12. The Default is set at 6 with 2 lines added between labels (see Space Between Labels). Width of Labels - This field indicates the width of your labels in characters. The measurement is made differently depending on whether you have "one-up" or multiple labels across a page (see Labels per Line below). The width for single labels may be entered as the actual number of characters that will fit on the label. For multiple labels across a page it MUST be measured as the number of characters needed to get from the first character of the first label to the first character of the second label. Standard 3 1/2" x 15/16" labels are 35 characters wide if used one across a page (35 characters fit on a label). For "2-up" labels you would need to enter 38 to indicate the starting position of the second label. PrtLabel will accept a number between 1 and 70. -------------- 9 PrtLabel ver. 5.0 ----------------------------------------------------------------- Space Between Labels - This field indicates the number of lines between labels vertically. You should enter ONLY the number of lines necessary to get from the last line of one label to the first line of the next. PrtLabel uses this number to add Line Feeds to get to the next label. When added to the Height of Labels, this number indicates how many lines from the top of one label to the top of the next. Left Margin - The Left Margin indicates the number of blank spaces inserted on the left side of the label, prior to printing the first character. Remember, all printed lines will have this number of blank spaces inserted at the left edge. The best way to set up your labels is to position the print head at the first character position and set the Left Margin to zero. Left Margin spacing is added only to the left margin of each line and will not be added to the second or subsequent labels if there is more than 1 label across a page. Labels per Line - This field tells PrtLabel how many columns of labels are to printed on a page. PrtLabel allows you to use labels up to 8 wide. Positioning multiple labels can be difficult, especially if a Left Margin is used. CAUTION: Mixed use of Condensed, Double Wide or Super Script will not function properly on labels that are more than one across a page. This results from the fact that each of these fonts cause a varied number of characters per inch during the time the font is in use. You may print the entire label in a non-standard width font as long as you properly indicate the spacing values to PrtLabel based on the number of characters per inch used by the font. For example, Condensed mode on many printers actually prints at 17 characters per inch. Using the standard 3 1/2 x 15/16 labels with 1/4" between each label horizontally you should set the width of multi-column labels to 64 since the distance from the first character of the first label to the first character of the second is actually 3.75" (3.75" x 17cpi = 64). Start # for Sequence - PrtLabel offers the ability to print sequenced numbers on each label starting with a value of your choice. For example, you may want to serialize labels starting at 250001 for some application. In this case the first label would be printed with 250001, the -------------- 10 PrtLabel ver. 5.0 ----------------------------------------------------------------- second 250002, etc. A sequence is entered on the label through the special ALT key combination ALT N. which is covered in additional detail later in this chapter. Sequence fields may contain only integer number values and are right justified within the allotted space. Width for Sequence - If you elect to make use of sequenced fields in your labels, PrtLabel needs to know how many characters to reserve for the ever expanding number. This number also controls whether the number will be printed with leading blanks filled with zeros or spaces. The default padding is the space character but can be overridden by entering a minus number in this field. A -4 indicates that all numbers will appear with leading zeros, ie 0001, 0002, etc. Entering just a 4 results in 1, 2, etc. Enter the maximum number of digits possible considering the starting sequence number and the number of labels to be printed. In the above example using a starting number of 250001, the width would be 6 unless more than 749,998 labels were to be printed. More information on number positioning is contained under the Text Entry section. Once the label parameters have been defined we change to the actual label text entry portion of the screen. The PgUp and PgDn keys alternate the cursor from the lower parameter section to the upper text entry section of the screen. -------------- 11 PrtLabel ver. 5.0 ----------------------------------------------------------------- BASIC TEXT ENTRY Text entry in PrtLabel is very straight forward and makes use of standard editing keys and WordStar alternates as follows: STANDARD KEY FUNCTION WORDSTAR KEY -------------------- ------------------------- ------------ Shift F1 - clears ENTIRE label text Del - delete character above cursor. Backspace - delete character left of cursor. Insert - toggle insert/overtype mode. Arrow Keys - move one character at a time. CTRL S,D,E,X Ctrl L/R Arrow - move one word at a time. CTRL A,F Home - move to the line beginning. CTRL Q-S End - move to line end. CTRL Q-D CTRL Y - delete entire line. CTRL Y TAB - moves to the beginning of the next line. CTRL I Shift TAB - moves to the beginning of the prior line. CTRL PgUp - moves to the first line. CTRL Q-R CTRL PgDn - moves to the last line. CTRL Q-C PgDn - change to the lower parameter screen. ESC - return to menu, leave label in memory. CTRL P - this special character is used to enter control characters directly into the text. The ^P character must be entered PRIOR to the actual character you desire to be embedded in the text. For example, to enter a CTRL G (the bell), you would press CTRL P (the cursor gets very large) followed by CTRL G. The actual character shown on screen is a capital G in a contrasting shade to normal text. This feature is included, although there are not many uses that come to mind immediately. ADVANCED TEXT & CODE ENTRY In addition to entering plain text into a label, there are several additional Attribute Characters and codes that may be used to control the appearance of text and printer performance. These attributes are entered through the use of ALT key codes, and instruct your printer to turn on and off the appropriate fonts. Options available are: -------------- 12 PrtLabel ver. 5.0 ----------------------------------------------------------------- Alt E - Emphasize Text (BOLD) Alt C - Condensed Text Alt D - Double Wide Text Alt U - Underlined Text Alt I - Italics Alt A - User defined printer code A Alt B - User defined printer code B Alt R - Printer reset code Alt N - Place sequenced number in text When you press an ALT key combination, an invisible format code is placed in the text and takes effect. The format status line located between the text entry and parameter sections will display the font placed in effect. The particular font will continue until the ALT format key is pressed a second time to end the format command. Whenever the cursor is located between TWO of the same format codes the format status line below the label text will show the type of format in use. To erase a format code in the text, move the cursor until the format code becomes activated on the status line and immediately press the appropriate ALT format key. Move the cursor again until the format code again becomes activated on the status line and again press the ALT format key to delete the 2nd code. In addition to the standard codes for Emphasized (Bold), Condensed, Double Wide, Italics and Underline, you may define two "User defined" fonts, A & B. Prior to using these they must be defined in your printer definition file with the proper codes to turn each on and off. See the section of PRINTER SETUP for details. The user defined fonts are activated with ALT A and ALT B. Two additional codes may be placed in label text, ALT N and ALT R. ALT N indicates the start of a Sequenced Numeric Field. Pressing ALT N displays a highlighted letter N which marks the LEFTMOST character position for the number sequence. Remember that sequenced numbers are RIGHT justified within the width of the field, and that they are padded with either spaces or leading zeros depending on the number and sign in the WIDTH OF SEQUENCE field in the parameter section. For example, if you want to include a serial number consisting of four digits you would enter the following on your label: Serial # N where N is the ALT N character. -------------- 13 PrtLabel ver. 5.0 ----------------------------------------------------------------- This results in a label with the following: Serial # 0001 if you used a -4 to enable leading zeros or Serial # 1 if you used a 4 to enable leading spaces. ALT R places a hidden Printer Reset code in the text. This might be used as the last label character to tell the printer to return to it's default power on state. Note that the printer definition files included with PrtLabel do NOT have the codes for Printer Reset included. In order to make use of this function you must first modify your printer definition file to include the proper codes for reset. See PRINTER SETUP for details on this process. Labels can also include box drawing characters constructed from the IBM character set single line, double or combinations as desired. The function keys F5 through F10 are used to enter these characters in the text. Pressing the function key causes the associated character to be placed in the text at the cursor position. You can change the type of lines used by F5 - F10 from double to single or combined single/double with the SHIFT F10 Change Frame key (hold down the Shift key and press F10). Once you have entered the label text and print parameters you are ready to test print a few labels. By testing only 2 labels you will discover any problems or formatting errors and can make the appropriate corrections. Press F4 to begin printing your test labels. Once your format is proper, you may want to SAVE the label definition for later use with the F3 key. Pressing F3 prompts you for a label name to use for the current parameters and text. The eight character name you specify is used as a file name with the extension .LBL which makes it available from the LOAD key F2. This "Label Directory" is a handy way to keep copies of labels you use on a regular basis. The best way to learn label formatting is by trial and error. Each printer requires a slightly different location for the printhead at Top of Form, and each label setup requires a trial run. We have not run across any labels that cannot be properly formatted after just a few variations of the available information. -------------- 14 PrtLabel ver. 5.0 ----------------------------------------------------------------- PRINTER SETUP Earlier in this manual you were instructed to set up the program to work properly with your printer by selecting PRINTER SETUP and loading your printer name from the list provided. If your printer was not included in the list, or if you want to modify the printer codes you may do so from this menu choice. The following is a summary of printer setup rules: Printer settings are saved individually by filename with the extension .PRN, and the ONLY .PRN file used by PrtLabel at print time is DEFAULT.PRN. Any printer file may be modified and re- saved under a different name, or as the DEFAULT.PRN file. Each line of the printer definition file contains 10 entry areas enclosed in brackets ie. [ 0], and each line relates only to one printer function. For example, the first line offers 10 different entry areas to indicate the codes for Emphasis On (Bold). Each entry area allows a three digit decimal number which should be the ASCII value of the required code. As an example we will review the codes for the EPSON LQ-1500 printer. In order to activate Emphasized (Bold) the manual indicates the codes are the ESCAPE character followed by G. The ASCII value in decimal for ESC is 27 and the value for upper case G is 71. The correct entry for the line is then: Emphasis On [027] [071] [ 0] [ 0] [ 0] [ 0] [ 0] etc. Codes for printer functions are located in your printer manual. As indicated previously, many printers support codes for Double Wide printing and they have NOT been included in the printer definition files included with Prtlabel. In order to make use of the ALT D code for Double Wide you must first modify your printer file to include the proper codes, and then save that file as DEFAULT.PRN. In addition to the standard format codes you may also specify 2 other User Defined fonts for use in labels. These may be anything you printer supports such as superscript, variable pitch or any other available option. Lastly, you may want to enter your printer reset codes which are a series of codes that return the printer to the power on defaults. Again, see your printer manual for the appropriate codes to enter in this section. After making any changes to a printer definition file don't forget to save it under the proper printer name AND ALSO as DEFAULT.PRN if you intend to use it with labels. -------------- 15 PrtLabel ver. 5.0 ----------------------------------------------------------------- TECHNICAL SUPPORT Customer satisfaction is very important to Mustang Software and we have tried to anticipate and respond to potential questions in this documentation. We realize that from time to time unexpected situations may occur and additional support is needed. Therefore, if you find that you are unable to locate the answer to your question after reviewing this documentation, you may get additional support via the following methods: CompuServe (75236,3312) Mustang Software maintains a technical support section for all of our products in the PC Vendors forum (GO PCVEN), subtopic 9. Simply leave your question in a message and call back the following day for a response. Users who have registered their copy of PrtLabel may also call voice for technical support. Mustang Software (805) 395-0223 The technical support staff at our office is available Monday - Friday from 9am - 4:30pm PST to help answer questions from registered users. If you have not yet registered you copy of PrtLabel, you may do so by phone prior to being transfered to the technical support department. Mustang Software WILDCAT! BBS 300-9600 baud (805) 395-0650 -------------- 16 PrtLabel ver. 5.0 ----------------------------------------------------------------- PrtLabel Registration Form You may obtain a master copy of the latest Registered PrtLabel version from Mustang Software by calling (805) 395-0223. Registration is $25 + $6 shipping and handling, and includes full technical support and notification and discounts on updates to the program. Site licenses and multiple copy discounts are available. VISA, MasterCard and American Express are accepted. You may also use the following registration for to mail in your payment if desired. Name: _______________________________________________________ Company or Reg. name: _______________________________________ Address: ____________________________________________________ City: ___________________________ State: ___ Zip: _________ Telephone: (_____) _____-________ Current Version: _________ Please send me _______ copies of PrtLabel! at $25 each. _______ Payment is enclosed. _______ Charge to my credit card... ______ VISA ______ MasterCard ______ American Express Card # ___________________________________ Exp Date ________ Name on card _______________________________________________ Signature _______________________________________________ Mail to: MUSTANG Software 3125 19th Street, Suite 162 Bakersfield, CA 93301-3118 ______ Please send me information on Mustang Software products! -------------- 17 PrtLabel ver. 5.0 ----------------------------------------------------------------- INDEX .LBL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 .PRN . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 15 "2-up Labels" . . . . . . . . . . . . . . . . . . . . . . . . . 9 * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 7 ALT Key . . . . . . . . . . . . . . . . . . . . . . . . . . 11-13 ASCII . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Bold . . . . . . . . . . . . . . . . . . . . . . . 6, 7, 13, 15 Border . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Box Drawing . . . . . . . . . . . . . . . . . . . . . . . . . 14 Color . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5, 7 Columns . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Condensed . . . . . . . . . . . . . . . . . . . . . . . 4, 10, 13 Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 DEFAULT.PRN . . . . . . . . . . . . . . . . . . . . . . . . 8, 15 Define Label . . . . . . . . . . . . . . . . . . . . . . . . . 9 DOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Double Wide . . . . . . . . . . . . . . . . . . . . 4, 10, 13, 15 Editing Keys . . . . . . . . . . . . . . . . . . . . . . . . 12 Emphasized . . . . . . . . . . . . . . . . . . . . . . . 13, 15 Fonts . . . . . . . . . . . . . . . . . . . . . 4, 10, 12, 13, 15 Height of Labels . . . . . . . . . . . . . . . . . . . . . 9, 10 Help . . . . . . . . . . . . . . . . . . . . . . . . . 3, 5, 16 Highlight . . . . . . . . . . . . . . . . . . . . . . . . . 6, 9 Installation . . . . . . . . . . . . . . . . . . . . . . . . . 4 Italics . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 13 Labels per Line . . . . . . . . . . . . . . . . . . . . . . 9, 10 Left Margin . . . . . . . . . . . . . . . . . . . . . . . . . 10 Line Drawing . . . . . . . . . . . . . . . . . . . . . . . . 14 Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Margin . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Memory . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 12 Monochrome . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Number of Labels . . . . . . . . . . . . . . . . . . . . . 9, 11 Numbers . . . . . . . . . . . . . . . . . . . . . . . 10, 11, 13 Numeric Padding . . . . . . . . . . . . . . . . . . . . . . . 11 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Padding . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Printer List . . . . . . . . . . . . . . . . . . . . . . . . . 6 Printer Reset Code . . . . . . . . . . . . . . . . . . . 13, 14 Printer Setup . . . . . . . . . . . . . . . . . . . . 6, 8, 13-15 Registration . . . . . . . . . . . . . . . . . . . . . . . 3, 17 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 4 Sequence . . . . . . . . . . . . . . . . . . . . . . 10, 11, 13 Serial Number . . . . . . . . . . . . . . . . . . . . . . . . 13 Shareware . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -------------- 18 PrtLabel ver. 5.0 ----------------------------------------------------------------- Space Between Labels . . . . . . . . . . . . . . . . . . . 9, 10 Standard Labels . . . . . . . . . . . . . . . . . . . . . . . . 9 Support Files . . . . . . . . . . . . . . . . . . . . . . . . . 4 Technical Support . . . . . . . . . . . . . . . . . . . 3, 16, 17 Text Entry . . . . . . . . . . . . . . . . . . . . . . . . 11-13 Underline . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Width of Labels . . . . . . . . . . . . . . . . . . . . . . . . 9 WordStar . . . . . . . . . . . . . . . . . . . . . . . . . . 12 -------------- 19 . . . . 11-13 Underline . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Warranty . . . . . . . . . . . . . . . . . . . . . . .