home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DP Tool Club 24
/
CD_ASCQ_24_0995.iso
/
vrac
/
aprs72a.zip
/
README
/
KPC3.TXT
< prev
next >
Wrap
Text File
|
1995-07-07
|
3KB
|
86 lines
The KPC-3 has a THIRD callsign that can be used as a digipeater address
which makes it a good candidate for a RELAY-WIDE digipeater!
The advantage of having every APRS digipeater respond to EITHER the
call of WIDE or RELAY completes the "generic" concept already partially
implemented. Presently with home stations being RELAYs and
digipeaters being WIDES, there are in effect two in-compatible
networks through which a MOBILE might travel. If the mobile is
far from a WIDE, then his FIRST digi must be RELAY. If he is
near a WIDE, then his first digi should be WIDE. By having the
digipeaters respond to EITHER, then most MOBILES can choose the
path of RELAY,WIDE routinely and RELAY,WIDE,WIDE for long distance
events.
The third callsign in the KPC-3 is the MYnode call. Set users
to one and do NOT use it as a node. The NODE call will also digipeat.
------------------------------------------------------------------------
HERE ARE COMMENTS ON THE LTRACK BUFFER IN THE KPC-3:
COMMENTS FROM: Bob kc5ejk@onramp.net or kc5ejk@amsat.org
Here's how to set the buffer storage inside the TNC to save the GPS data.
Do only once before getting data, as I think this clears the buffer.
LTRACK
LTRACK 5 LT1 LT2 LT3 LT4 or
LTRACK 5 LT2 for only saving the LT2 data which is $GPRMC per
my GPSHEAD setting.
With the standard 32K of memory 17 is the largest I could set this value.
Note the data is stored in the buffer at the rate set by the BLT beacon
command not the rate the GPS sends date to the TNC.
INTERFACE GPS causes the TNC to power up in GPS mode.
INTFACE {TERMINAL | NEWUSER | BBS | KISS | HOST | GPS}
I also use the Software CD setting: CD SOFTWARE
-----------------------------------------------------------------------
How to READ GPS track DATA from the TNC buffer:
login to the TNC BBS as callsign-1
LTRack n [string] DISPLAY LAST n MSGS IN TRACK BUFFER
LTRACK 50 Read 50 lines of data from the buffer
LTRACK 50 $GPGGA Read 50 lines of $GPGGA data from the buffer.
The data is dumped back in LIFO format (last in first out) which is
backward of what you are expecting for a trip log using APRS.
---------------------------------------------
The other settings you must do to the kpc-3:
Setting for which NEMA sentences you want to record or beacon
You get to set up to 4. I use only two GPSHEAD
1 $GPGGA
2 $GPRMC
The LT buffer filled with real GPS data
LT
1 $GPGGA,064301,3250.743,N,09645.669,W,1,05,2.6,236.7,M,-24.8,M,,*71
2 $GPRMC,064303,A,3250.742,N,09645.668,W,002.4,121.2,040695,,*06
The LT buffer when the GPS is not seeing any satellites.
LT
1 $GPGGA,100552,,,,,0,00,,,M,,M,,*65
2 $GPRMC,100551,V,,,,,,,020695,,*39
Setting the beacon time for the GPS data, I use $GPGGA two times a min
and $GPRMC once a min. Note the offset so DIGIs have time to respond
BLT
1 EVERY 00:00:30
2 EVERY 00:01:10
3 EVERY 00:00:00
4 EVERY 00:00:00
Setting for the output APRS format
LTP
1 APRSM VIA RELAY
2 APRSM VIA RELAY,WIDE
3 NONE
4 NONE
Hope that helps. Bob kc5ejk@onramp.net or kc5ejk@amsat.org