home *** CD-ROM | disk | FTP | other *** search
/ DP Tool Club 31 / CDASC_31_1996_juillet_aout.iso / vrac / usere130.zip / USERED.DOC < prev    next >
Text File  |  1996-05-02  |  8KB  |  201 lines

  1.                           USERED v1.30 (04-06-96)
  2.                           Copyright 1996 OILERSoFT
  3.                          Description & Documentation
  4.  
  5.  
  6. NOTE: This is for RENEGADE v04-05-96 and higher only!!!
  7.  
  8. WHAT: USERED is a commandline driven program, which allows you to edit ANY
  9. users information. Such as SL, DSL, Credits, Debits, AR Flags, etc...
  10. You do this by specifying a user ACS to match (like S10!S11), then
  11. specifying which options listed below to perform on the users who match
  12. the ACS you specified.
  13.  
  14. NOTE: Any errors that occur during the operation of USERED will be
  15. identified on screen and they will also be logged to a file
  16. called ERRORS.LOG located in the same path as USERED.EXE.
  17.  
  18. I will first give an explanation of how the USERED.CFG configuration
  19. file needs to be setup, in order to run properly. USERED.CFG must be
  20. in the same path as USERED.EXE. The following is a copy of the example
  21. USERED.CFG that comes with this archive, each line will be explained
  22. in detail as follows, the "Line #??" are just to help explain the
  23. .CFG file, do not include them in your .CFG file:
  24.  
  25. Line #01--c:\rg\
  26.  
  27. *************************END OF CONFIG FILE******************************
  28.  
  29. Explanation for each line:
  30.  
  31. Line #01--Complete path to your renegade.dat file.
  32.  
  33.  
  34.  
  35. The Format is as follows:
  36. USERED [ACS-to-Match] <Commands>
  37.  
  38. The ACS to match can be any VALID Renegade ACS, including logical operators.
  39. An ACS to match MUST BE USED for USERED to work correctly. If you want
  40. to specify all users, then just use S1 for the ACS to match.
  41. Some Examples of ACS settings for USERED to search for:
  42. S10     - This will search for users who have an SL level of at least 10.
  43. S10!S50 - This will search for users who have an SL level of at least 10,
  44.           but no greater then 50.
  45. D200FZ  - This will search for users who have a DSL level of at least 200,
  46.           and have the AR Flag "Z".
  47.  
  48. If the user matches the ACS you have specified, then any of the below
  49. commands you have specified will be performed:
  50. Dx          = Change DSL to x
  51. Fx          = Turn AR Flag x ON
  52. Fx-         = Turn AR Flag x OFF
  53. PCx         = ADD x Credits
  54.               This Command is ONLY available in the REGISTERED version.
  55. PCx-        = SUBTRACT x Credits
  56. PC0         = Set Credits to 0
  57. PDx         = ADD x Debits
  58. PDx-        = SUBTRACT x Debits
  59. PD0         = Set Debits to 0
  60. Rx          = Turn AC Flag x ON
  61. Rx-         = Turn AC Flag x OFF
  62. Sx          = Change SL to x
  63. ALERT       = Turn Logon Alert ON
  64. ALERT-      = Turn Logon Alert OFF
  65. AUTODETECT  = Turn Emulation Detect ON
  66. AUTODETECT- = Turn Emulation Detect OFF
  67. CHECKSL x y = Change SL to x If Inactive for y days
  68.               This Command is ONLY available in the REGISTERED version.
  69. DELETE x    = Delete, If Inactive for x Days
  70.               This Command is ONLY available in the REGISTERED version.
  71. HOTKEY      = Turn Hotkey ON
  72. HOTKEY-     = Turn Hotkey OFF
  73. PAUSE       = Turn Screen Pausing ON
  74. PAUSE-      = Turn Screen Pausing OFF
  75. TRAP        = Turn Activity Trapping ON
  76. TRAP-       = Turn Activity Trapping OFF
  77. UNDELETE    = Undelete, If Active in x Days
  78. ASK         = Ask Before Changing
  79.  
  80. NOTE: You can use more then one parameter on the commandline, and
  81. Commands MUST be seperated by a space.
  82.  
  83. Examples for each command:
  84.  
  85. USERED S100!S101 D100 - Users with an SL level of at least 100 but no 
  86. greater then 100, would have their DSL level set to 100.
  87.  
  88. USERED FA FB = Users with the AR flag 'A', would have their AR flag 'B'
  89. turned on.
  90.  
  91. USERED FA FA- = Users with the AR flag 'A', would have their AR flag 'A'
  92. turned off.
  93.  
  94. USERED S1 PC1000 = Users with an SL level of at least 1, would have
  95. 1000 credits added to their current credit total.
  96.  
  97. USERED D101 PC100- = Users with a DSL level of at least 101, would have
  98. 100 credits deducted from their current credit total.
  99.  
  100. USERED S100FZ PC0 = Users with an SL level of at least 100 and the AR
  101. flag 'Z', would have their credits set to 0.
  102.  
  103. USERED S1 PD1000 = Users with an SL level of at least 1, would have
  104. 1000 debits added to their current debit total.
  105.  
  106. USERED D101 PD100- = Users with a DSL level of at least 101, would have
  107. 100 debits deducted from their current debit total.
  108.  
  109. USERED S100FZ PD0 = Users with an SL level of at least 100 and the AR
  110. flag 'Z', would have their debits set to 0.
  111.  
  112. USERED FQ RM = Users with the AR flag 'Q', would have their AC flag 'M'
  113. turned on.
  114.  
  115. USERED GM R4- = Male users, would have their AC flag '4' turned off.
  116.  
  117. USERED S1A21 S121 = Users with an SL level of at least 1 and who are
  118. at least 21 years old, will have their SL level changed to 121.
  119.  
  120. USERED P100 ALERT = Users with a balance of at least 100 credits, would
  121. have their alert sysop upon logon flag turned on.
  122.  
  123. USERED D1 ALERT- = Users with a DSL level of at least 1, would have
  124. their alert sysop upon logon flag turned off.
  125.  
  126. USERED EV AUTODETECT = Users using Avatar emulation, would have their
  127. autodetect emulation upon logon flag turned on.
  128.  
  129. USERED ER AUTODETECT- = Users using RIP graphics, would have their
  130. autodetect emulation upon logon flag turned off.
  131.  
  132. USERED S100!S200|FA CHECKSL 50 90 = Users with an SL level of at least
  133. 100 but no greater then 200 OR Users with the AR flag 'A', would have
  134. their SL level changed to 50 if they have not called for 90 or more days.
  135. This parameter is ONLY available in the REGISTERED version.
  136.  
  137. USERED S1 DELETE 120 = Users with an SL level of at least 1, would be
  138. deleted if they have not called for 120 or more days. This parameter is
  139. ONLY available in the REGISTERED version.
  140.  
  141. USERED R4 HOTKEY = Users with the AC flag '4', would have their hotkey
  142. mode turned on.
  143.  
  144. USERED !R4 HOTKEY- = Users without the AC flag '4', would have their
  145. hotkey mode turned off.
  146.  
  147. USERED S100|D100 PAUSE = Users with an SL level of at least 100 OR
  148. with a DSL level of at least 100, would have their screen pausing
  149. flag turned on.
  150.  
  151. USERED A21 PAUSE- = Users who are at least 21 years old, would have their
  152. screen pausing turned off.
  153.  
  154. USERED !VV TRAP = Users who are not validated, would have their activity
  155. trapping turned on.
  156.  
  157. USERED VV TRAP- = Users who are validated, would have their activity
  158. trapping turned off.
  159.  
  160. USERED S1 UNDELETE 90 = Users with an SL level of at least 1, would be
  161. undeleted if they have called within 90 days.
  162.  
  163. The ASK parameter, allows you to specify that USERED prompt you before
  164. making any changes to the specified user. This parameter is ONLY
  165. available in the REGISTERED version. Example:
  166.  
  167. USERED S1 DELETE 120 ASK = Users with an SL level of at least 1, would be
  168. deleted if they have not called for 120 or more days and you would be
  169. prompted before any changes are made and asked if you want to make the
  170. change or not.
  171.  
  172.  
  173. INFO & REGISTRATION:
  174.  
  175. If you like this utility, and find it useful, then PLEASE register it.
  176. Registering this utility will enable ALL commands, and remove ALL pauses.
  177. You will also receive ALL future upgrades to USERED and will also be
  178. informed of any upcoming utilities that i am working on, and have input
  179. into their development. So please register USERED by printing the file
  180. REGISTER.DOC, filling in ALL the blanks, then sending the completed form
  181. along with $10.00 to:
  182.  
  183. OILERSoFT
  184. 5895 Gentry Ln.
  185. Carson City, NV.
  186. 89701
  187.  
  188. After I receive your completed registration form and $10.00 you will
  189. be a validated user on my BBS.
  190.  
  191. To get your REGISTERED version of USERED (after sending the completed
  192. form and $10.00) call the BBS listed below. If you have any questions
  193. or would like a utility made for RENEGADE (I would be more than happy to
  194. make it for you) I can be contacted at my BBS:
  195.  
  196. The Coliseum BBS (Home of OILERSoFT)
  197. (702) 629-0723
  198. 1200 to 33600 baud (v34/HST)
  199. Sysop: Oiler
  200.  
  201.