home *** CD-ROM | disk | FTP | other *** search
/ DP Tool Club 31 / CDASC_31_1996_juillet_aout.iso / vrac / netsw190.zip / README.TXT < prev    next >
Text File  |  1996-06-02  |  7KB  |  176 lines

  1. *************************************************************************
  2.                README.TXT for NetSwitcher for Windows 95
  3.                             Version 1.9BETA
  4. *************************************************************************
  5.  
  6. Description of NetSwitcher:
  7.  
  8. NetSwitcher is a utility which addresses a problem in Windows 95 which 
  9. afflicts users who need to connect to more than one network.  For 
  10. example, if you regularly work in two different locations and use a 
  11. notebook computer with an Ethernet card, you may need to have 
  12. different IP addresses, netmasks, gateways, hostname, etc. MicrosoftÆs 
  13. Network Control Panel allows you to change these but it is a manual, 
  14. time consuming, and error prone process.  NetSwitcher solves this 
  15. problem by "memorizing" your networking setups and allowing you to 
  16. restore them when you need to change hookups.  If your new setup 
  17. requires a reboot, NetSwitcher will prompt you to reboot.  If, however, 
  18. a reboot is not required, then unlike the Network Control Panel, no 
  19. reboot will be requested.
  20.  
  21. NetSwitcher also solves a problem with MicrosoftÆs Dial-Up Networking 
  22. utility in Windows 95.  If you have more than one ISP (Internet 
  23. Service Provider) where you have to use a different domain name 
  24. server (DNS) for each one, then NetSwitcher will change this part 
  25. of your setup for you without requiring a reboot.  You may say, 
  26. "Oh, the Dial-Up Networking connection setup menu has a place for me 
  27. to specify the DNS address for each connection.  Why canÆt I just use 
  28. that?"  Well, you can say that, and you can use that, but it doesnÆt 
  29. work!  So you need to change your Network Control Panel settings each 
  30. time you want to use a different ISP, and do a reboot for it to take 
  31. effect.  Or, you can use NetSwitcher to change this setting for you.
  32.  
  33. **********************************************************************
  34.                             Quick Start
  35. **********************************************************************
  36.  
  37. NOTE: Please follow these instructions even if you are just upgrading
  38.       from an earlier version of NetSwitcher.
  39.  
  40. 1) If you aren't running Windows 95, don't bother going any further.
  41.    NetSwitcher work with, and only with, Windows 95.
  42.  
  43. 2) UNZIP the files from the distribution archive into their own
  44.    directory. C:\NETSW would be a good choice.
  45.  
  46.       EXAMPLE (if you use PKUNZIP):
  47.         First start a COMMAND Shell. (Try double-clicking the MSDOS icon,
  48.         or press the START Menu>Run and type in COMMAND)
  49.  
  50.         C:\WINDOWS>cd \
  51.         C:\>mkdir netsw
  52.         C:\>cd netsw
  53.         C:\NETSW>pkunzip \your_path\download\netswVVV.zip
  54.                         (where VVV above is the version number)
  55.  
  56. 3) Change your working directory to wherever you unzipped it. (If you
  57.    are not already there.
  58.  
  59.         C:\XYZ>cd \netsw
  60.         C:\NETSW>
  61.  
  62. 4) Execute NetSwitcher.Exe with the install option:
  63.  
  64.         C:\NETSW>netsw -install
  65.  
  66. 5) After NetSwitcher starts, press the HELP button for more information.
  67.  
  68.  
  69. NetSwitcher is Copyright ⌐ 1996 J.W. Hance - All Rights Reserved
  70.  
  71. *************************************************************************
  72.                               Release Notes
  73. *************************************************************************
  74. Release Notes for Version 1.9BETA
  75.  
  76. 1) Fixed (hopefully for all cases this time) a problem with some ISA
  77.    plug-and-play and PCMCIA ethernet adapters.
  78.  
  79. 2) Added capability to handle multiple network adapters of the same type
  80.    in the system.
  81.  
  82. 3) Added the REGDUMP utility to help in extracting the relevant registry
  83.    data for debugging any remaining cases where #1 above is still not
  84.    working.
  85.  
  86.  
  87. Release Notes for Version 1.85BETA
  88.  
  89. 1) Fixed problem which occurs when an network adapter is PCI or ISA 
  90.    plug-and-play.  Note that if you have more than one network 
  91.    adapter of the SAME TYPE installed in the system, NetSwitcher will
  92.    probably give you a message like:
  93.  
  94.       "Multiple Adapter Enumerations - See the file 'README.TXT'"
  95.  
  96.    If this happens to you, follow the instructions at the end of this 
  97.    file titled "Dumping your Registry".
  98.  
  99. 2) Added "AutoApply" directive to the ".nsw" file.  If present, and 
  100.    everything else is OK, NetSwitcher will change setups without 
  101.    even appearing on the screen.  If a reboot is required, however, 
  102.    you will be prompted before it actually happens.  I could add an
  103.    auto-reboot option as well so someone could run NetSwitcher from
  104.    a startup script or something. Let me know if this could be useful.
  105.  
  106. Release Notes for Version 1.8BETA
  107.  
  108. 1) Added ScopeID field needed for WINS servers.
  109.  
  110. 2) Added Adapter line to config file which will automatically select
  111.    that adapter when the .nsw file is loaded.
  112.  
  113. 3) Renamed application to netsw.exe from netswitcher.exe as some users
  114.    were having trouble unzipping the long filenames.
  115.  
  116.  
  117. Release Notes for Version 1.7BETA
  118.  
  119. 1) I think the problem with failing to find the correct settings for a
  120.    PCMCIA adapter has been fixed.
  121.  
  122. 2) There seem to be problems reboot some computers.  If you get a message
  123.    about a failure in ExitWindowsEx(), please EMAIL me the error code.
  124.  
  125. 3) Removed the -force switch and replaced it with the -install switch.
  126.  
  127. 4) Added feature to remember the last selected adapter.
  128.  
  129. 5) Added -noadapter switch to disable auto selection of last adapter. This
  130.    might be useful if you swap out adapters and NetSwitcher fails to start.
  131.  
  132.  
  133. Release Notes for Version 1.6BETA
  134.  
  135. 1) Problem finding the correct network adapter settings on a very few
  136.    machines.  Seems to be involved with portable computers having
  137.    PCMCIA network adapters.
  138.  
  139. 2) This version will "time out" after the 10-day evaulation period. After
  140.    that time it will "nag" the user to register the program.
  141.  
  142. 3) Added the -force switch to reregister the "nsw" file type with 
  143.    Windows 95 in case the user moved NetSwitcher's home directory.
  144.  
  145.  
  146. ***********************************************************************
  147. Dumping Your Registry
  148. ***********************************************************************
  149.  
  150. NetSwitcher uses several settings in your Windows 95 registry to figure
  151. out what your current setup is and modifies these to make the changes
  152. you request.  Unfortunately, Microsoft has chosen not to document much
  153. of this information.  In developing NetSwitcher, I have tried to 
  154. anticipate as much of what might be in the registry but it is not an
  155. exact science.  If you get a message directing you here, please follow
  156. these instructions for dumping out the contents of your registry so that
  157. I can analyze it and correct NetSwitcher to take your situation into
  158. account.
  159.  
  160. To dump the registry do the following:
  161.  
  162. 1) Click the START menu, then choose Run...
  163.  
  164. 2) Click the Browse button and navigate to the NETSW home directory.
  165.    You should see the program "regdump.exe".
  166.  
  167. 3) Double click on "regdump.exe" and click OK.
  168.  
  169. 4) Regdump will ask you to input your EMAIL address.
  170.  
  171. 5) Regdump will write it's output to a file called "regdump.out"
  172.    in the NetSwitcher directory.
  173.  
  174. 6) EMAIL the regdump.out (preferrably compressed with ZIP) file
  175.    to me at: joe@bysnet.com.
  176.