home *** CD-ROM | disk | FTP | other *** search
/ DP Tool Club 31 / CDASC_31_1996_juillet_aout.iso / vrac / faxhvn30.zip / README.HQF < prev    next >
Text File  |  1996-04-22  |  48KB  |  797 lines

  1. This is the readme file for new users of 1-Step High Quality FAX, (Readme.HQF)
  2. Copyright (c) 1996 by HTF Consulting.
  3. You can get a hard copy of this file by entering "Print readme.hqf".
  4.  
  5. This file contains information about the following subjects:
  6.   1) What HQ-FAX is,
  7.   2) Installing HQ-FAX,
  8.   3) First time use ( a simple tutorial),
  9.   4) Printing-to-disk,
  10.   5) Producing ECL (Epson Control Language) files,
  11.   6) General information about the shareware distribution method,
  12.   7) Information required by the ASP, (Assoc. of Shareware Professionals),
  13.   8) A Disclaimer,
  14.   9) How to register, registration benefits & product support
  15.  10) Screen shots of One-Step FAXHAVEN
  16.  
  17. ============================================================================
  18. 1) WHAT HQ-FAX IS and is not
  19. ============================================================================
  20. One-Step High Quality FAX is intended to produce and transmit letter-quailty
  21. FAXes.  It provides many value-adding features such as incorporating custom
  22. forms, thumb-tacking graphic images, and producing a variety of image formats.
  23. HQ-FAX does not receive or process received FAXes. If you are looking for
  24. software to process received FAXes, look for One-Step FAXHAVEN where you found
  25. HQ-FAX.  Or look for our World Wide Web page @ http://www.execpc.com/~htfcons.
  26.  
  27. ============================================================================
  28. 2) INSTALLATION PROCEDURE
  29. ============================================================================
  30. As you are reading this Readme file, it is assumed that you have trans-
  31. ferred the complete umcompressed HQ-FAX package to a diskette. It is NOT
  32. necessary to do so.  If you have downloaded the HQFAX.zip file and unzipped
  33. it into a temporary directory, the installation procedure works ok.
  34.  
  35. A)   Mount the installation diskette into drive A: or B:
  36.  
  37. B)   Enter A: or B: Make sure that the DOS prompt  changes  from
  38.      C:> to A:>, or from C:> to B:>. This is very important!
  39.  
  40. C)   Enter "Install".  If you wish the package to install itself on any
  41.      directory other than C:\HQFAX, enter the pathname in the Install command.
  42.          Example (1): "Install D:\Hqfax",
  43.          Example (2): "Install C:\Doc2fax"
  44.  
  45. Now you can watch HQ-FAX install itself. It will only take a minute.
  46. This install procedure will NOT update your Autoexec.bat file. It will
  47. place a customized "Hqfax.bat" file in the root directory, drive C:, so
  48. that it will change to the C:\HQFAX directory (or the directory that
  49. you specified) before executing the HQ-FAX procedure.
  50.  
  51. ============================================================================
  52. 3) FIRST TIME USE  (HQ-FAX orientation procedure, a simple tutorial)
  53. ============================================================================
  54. We strongly recommend to new users of HQ-FAX that the following procedure be
  55. followed to get acquainted with the product. It is assumed that you have a
  56. functioning FAX modem when you are ready to excercise HQ-FAX.  If not, you may
  57. follow these instructions to get the feel of HQ-FAX, but you will not be able
  58. to examine the FAXed output.
  59.  
  60. A) Print out the files "HQFAX.hlp" and "Readme.hqf" if you have not already
  61.    done so and have them handy.
  62.  
  63. B) Have ready the phone number of a FAX station to send a FAX to.
  64.    You will wish to examine the FAX(es) that you send.
  65.    1) Enter "HQFAX" at the DOS prompt.
  66.    2) Use the <TAB> key to position the cursor to the Phone(Send-to) field.
  67.    3) Enter a phone number of a FAX machine into the Phone field.
  68.    4) Enter <F10>. This will save the phone number which you entered.
  69.    5) Enter <F2>. This will convert and send the sample file "HQFDEMO1.ecl"
  70.           to the FAX station.
  71.  
  72. C) Next, let's FAX a cover sheet with the document.
  73.    1) Enter "HQFAX" at the DOS prompt.
  74.    2) Enter <F7>. The cover sheet screen will appear.
  75.           Use the <TAB> key to position the cursor from field to field.
  76.           Fill in the correct cover sheet information for your needs.
  77.           Enter a quick note to a friend at the FAX station you will send to.
  78.    3) Enter <F10>. This will save your current cover sheet for later use.
  79.           (In the future you will wish to remove the text "[FILE]htfclogo" from
  80.           the top of this screen, & the text "[X]JHancock" from the bottom).
  81.    4) Enter <F2>. This will exit the Cover sheet screen & return you to HQFAX.
  82.    5) Enter <F2> again. HQFAX will convert and send the cover sheet & the file
  83.           "HQFDEMO1.ecl" to the FAX station.
  84.  
  85. D) Next, let's FAX a cover sheet without a document.
  86.    1) Enter "HQFAX" at the DOS prompt.
  87.    2) Enter <F7>. The cover sheet screen will appear.
  88.           Use the information which you have previously typed in.
  89.           Remove the text "[FILE]htfclogo" from the top of this screen, and the
  90.           text "[X]JHancock" from the bottom of this screen. This will remove
  91.           the graphic logo and signature from the FAXed output.
  92.    3) Enter <F10>. This will save your current cover sheet for later use.
  93.    4) Enter <F2>. This will exit the Cover sheet screen and return you to HQFAX.
  94.    5) Use the <TAB> key to position the cursor to the File field.
  95.           Use the <spacebar> to blank out the name in the file field *AND* the
  96.           file extension *AND* the OUTPUT to field.
  97.           Make sure that there is nothing but spaces in these fields.
  98.           This causes HQ-FAX to send just a cover sheet.
  99.    6) Enter <F2> again. HQFAX will convert and send the cover sheet which you
  100.           have set up to the FAX station.
  101.  
  102. E) Next, let's FAX a simple ASCII file. How about "C:\autoexec.bat".
  103.    1) Enter "HQFAX".
  104.    2) Put the file name "C:\Autoexec" in the input-file-field, with the file
  105.           extension "bat" in the field which currently has "ECL" in it.
  106.    2) Enter <F2> as before. HQFAX will convert and send the file
  107.           "C:\autoexec.bat" to the FAX station.
  108.  
  109. F) Next, let's FAX a Print-Capture.
  110.    1) Enter "HQFAX" at the DOS prompt.
  111.    2) <TAB> to the INPUT-from-LPTx field. Enter a '1'.
  112.    3) Enter <F2>. This will set up a print-capture within HQFAX.
  113.    4) Enter <ESC> to exit HQFAX. Print-capture is now active.
  114.           The simplest print-capture to try is to use the DOS print command to
  115.           print an ASCII file, for example "C:\autoexec.bat".
  116.    4) At the DOS prompt enter: "Print C:\autoexec.bat".
  117.           When the print-capture completes, you must enter "FAXIT" to FAX the
  118.           file.  HQFAX will then convert and send the file "C:\LPT1FILE.ecl".
  119.    5) You may also do a print-capture of the DOS print-screen function, which
  120.       is invoked by the Print-scrn key on your keyboard.  Follow the
  121.       instructions above, replacing the DOS print command with pressing the
  122.       <Print-scrn> key.
  123.  
  124. G) Next, let's produce a document in Epson-LQ format and FAX it.
  125.    !!ATTENTION!!  !!ATTENTION!!  !!ATTENTION!!  !!ATTENTION!!
  126.    HQ-FAX now provides a PCL (HP-Laserjet) interface. To use this interface,
  127.    follow the instructions below, but name your print-to-disk files with a
  128.    "PCL" file extension, and use an HP-Laserjet or PCL4 printer driver.
  129.    If you wish to use the Epson Control Language interface, name your
  130.    print-to-disk files with the "ECL" file extension.
  131.  
  132.    You must tell your word processor that you have an Epson-LQ 510 or
  133.    similar printer. You do *NOT* need to have this printer. HQ-FAX will be
  134.    this printer.
  135.    1) Enter "HQFAX" at the DOS prompt. You may do this from inside your word
  136.           processor if it has a means of entering DOS commands.
  137.    2) <TAB> to the INPUT-from-LPTx field and enter a '1' as before.
  138.    3) Enter <F2>. This will set up a print-capture within HQFAX.
  139.    4) Enter <ESC>ape to exit HQFAX.
  140.    5) From within your word processor print a short document to an Epson-LQ
  141.           printer. This will be print-captured by HQ-FAX.
  142.    When printing is complete, get to a DOS prompt and enter "FAXIT" as before.
  143.  
  144. H) Next, let's produce a print-to-disk file in Epson format and FAX it.
  145.        Doing a print-to-disk is easy, but setting it up for the first time may
  146.        be a challenge. How to produce print-to-disk files varies from one
  147.        word processor to another.  Please study the documentation in the
  148.        section "Producing Epson Print Files" below file for more information.
  149.  
  150.        Give the print-to-disk file a file extension of ".ECL".
  151.        Name the print-to-disk file something like "Mydoc.ecl".
  152.    1) Enter "HQFAX" at the DOS prompt.
  153.    2) Erase the '1' in '2' or '3'. in the LPTx field.
  154.            Enter the name of your print-to-disk file in the file field, with
  155.            the extension "ECL" in the next field.
  156.    3) Enter <F2>. This will convert and send your print-to-disk file to that
  157.            FAX station.
  158.  
  159. I) Take some time to study the file "HQFAX.hlp" to learn more about HQ-FAX'es
  160.    many features. Give some thought to which ones are most useful to you.
  161.  
  162. J) IF you have gotten this far without too much difficulty, It's time to
  163.    register HQ-FAX.
  164.    1) Enter "HQFAX" at the DOS prompt.
  165.    2) Enter <F8>. The registration and order form screen will appear.
  166.           Fill in your name, address and payment information, as well as which
  167.           product you are registering, and what diskette size you require.
  168.    3) Enter <F3>. This will verify your input and total your payment.
  169.           You may make a hard copy of this screen if you desire.
  170.    4) Enter <F8> again. The registration form will be FAXed to HTF Consulting.
  171.       You will then receive your registration materials shortly.
  172.  
  173. ============================================================================
  174. 4) Printing to Disk
  175. ============================================================================
  176. Some users may be new to the concept of printing to disk. This is simply
  177. a special print operation where the output is re-directed from LPT1 to
  178. a disk file. The resultant file is byte-for-byte the same stream of data
  179. which would have gone to the printer.  Every major Word Processor has the
  180. ability to re-direct printer output to a disk file of the user's choosing.
  181. The details of how to perform this operation vary with each Word Processor.
  182. See the following section for more information.
  183.  
  184. HTF Consulting stands behind the print-to-disk method for producing input
  185. to a FAX producing application.  There are several reasons for this.
  186.   A) "Print-Capture" TSRs are very limited in what they can do becuase
  187.      they are working with a very finite amount of memory. It is difficult
  188.      or impossible to incorporate graphics or work with a variety of fonts.
  189.   B) When something goes wrong with a print-capture or a FAX transmission,
  190.      the whole printing and FAXing procedure must be started over.  Once
  191.      you have printed to disk, it's done.  You can retry the FAX transmission
  192.      if necessary.
  193.   C) Problems with print-captures are difficult to diagnose. It is much
  194.      easier to diagnose errors associated with reading a disk file.
  195.   D) The input data stream for the FAX application is recorded permamently,
  196.      and may be re-used.
  197.   E) FAXing what has already been printed is more natural than setting
  198.      up a FAX transmission and then printing from a Word Processor.
  199.  
  200. ============================================================================
  201. 5) Producing Epson Print Files
  202. ============================================================================
  203.  This section provides detailed instructions for producing Epson Print files of
  204.  your documents from your word processor. These files are the input files that
  205.  HQFAX uses to produce the FAX-ready, letter-quality images of your documents.
  206.  You do not need an EPSON printer, but you must be able to print to a disk file
  207.  as if it were an EPSON printer.  You must do this without upsetting the print
  208.  driver which you have installed for your real printer.
  209.  
  210.  If your Word Processor produces graphics integrated with text, it may want to
  211.  know what graphics resolution you wish to send to the EPSON-LQ printer. The
  212.  correct choice for HQ-FAX is 180 X 180 d.p.i. This is the resolution closest
  213.  to the Group-3 FAX resolution of 200 X 200 d.p.i. HQ-FAX will do a credible
  214.  job of translating higher resolution images, (thanks to the infinite patience
  215.  of Richard Harper of the Association of Shareware Professionals), but the
  216.  results will be at best no better than if you choose 180 X 180 d.p.i.  Also it
  217.  will be more work for your word processor and HQ-FAX.
  218.  
  219.  If you use any of the following word processors; 1) WordPerfect, 2) MS-Word,
  220.  3) MS-Works, 4) WordStar, or 5) any Windows application, see the specific
  221.  sub-section for your application.  If you use another word processor or
  222.  spreadsheet package, proceed with the instructions that follow.
  223.  
  224.  
  225.  PRODUCING EPSON PRINT FILES FROM ANY STANDARD APPLICATION PACKAGE.
  226.  
  227.  If you are using a spreadsheet package or a word processor other than those
  228.  listed above, do the following.  Consult the reference manual for your
  229.  specific application package for the details for performing these steps.
  230.  
  231.    1) Install the printer driver which most closely matches the EPSON LQ
  232.       or EPSON LQ-510.
  233.  
  234.    2) Make the EPSON printer the active or current printer inside your
  235.       application (word processor, spreadsheet or whatever).
  236.  
  237.    3) Study the documentation for your application to learn how to insert
  238.       custom print controls into your document. This will only be necessary to
  239.       use the custom print controls documented in the section Epson Cus-
  240.       tom Print Controls.
  241.  
  242.    4) Use the print command in your application to print to a disk file.
  243.       The disk file MUST have the ".ECL" file extension, and it must be
  244.       stored in a directory such as C:\hqfax or the directory of your
  245.       word processor.
  246.  
  247.    5) Run the HQFAX command, identify the ECL file that you wish to
  248.       convert, and enter the other conversion parameters as well.
  249.  
  250.  
  251.  PRODUCING EPSON PRINT FILES FROM MICROSOFT WORD 5.0
  252.  
  253.    1) First, be sure that you have an EPSONLQ PRD file installed in your
  254.       MS-Word directory.  This may require you to find your print driver
  255.       diskette from your MS-Word diskettes.
  256.  
  257.    2) If you have not done so, create your MS-Word document using any of the
  258.       features of the Epson LQ-510 printer.  Find the section "Entering Special
  259.       Characters" in the MS-Word for DOS User manual, page 41. Study this
  260.       section to learn how to insert the HQFAX Custom Print Control characters
  261.       into your MS-Word document to produce oversized characters.
  262.  
  263.    3) From the MS-Word main screen, enter <ESC> to select the Command Menu.
  264.       Enter 'P' for the Print Menu. Enter 'O' to select options.
  265.  
  266.    4) From the Print Menu, enter <F1> to get the list of printers. Use the
  267.       arrow keys to position the cursor over the Epson-LQ printer and then hit
  268.       the <ENTER> key.
  269.  
  270.    5) From the Print Menu select the File option.
  271.       At the prompt "Print FILE name:" enter a filename with the ".ECL" file
  272.       extension. Store the ECL file in your C:\Word directory or C:\hqfax.
  273.  
  274.    6) Exit MS-Word, run the HQFAX command, identify the ECL file that you wish
  275.       to convert, and enter the other conversion parameters as well.
  276.  
  277.  
  278.  PRODUCING EPSON PRINT FILES FROM MICROSOFT WORKS 2.0
  279.  
  280.    1) First, be sure that you have an EPSONLQ PRD file installed in your
  281.       MS-Works directory. This may require you to find your print driver
  282.       diskette from your MS-Works diskettes.
  283.  
  284.    2) If you have not done so, create your MS-Works document using any of the
  285.       features of the Epson LQ-510 printer.
  286.  
  287.    3) From within MS-Works, enter <Alt P> to select the Print Menu. Use the
  288.       arrow keys to select the Printer Setup option. Hit <ENTER>.
  289.  
  290.    4) Use the arrow keys to position the cursor in the printer model options.
  291.       Select the EPSON LQ-510.
  292.  
  293.    5) Enter <Alt P> to select the Print Menu. Use the arrow keys to select the
  294.       Print a File option.  Enter 'F' to print to a file. Enter a filename
  295.       with the ".ECL" file extension.  Store the ECL file in your C:\Works
  296.       directory or C:\hqfax.
  297.  
  298.    6) Enter <Alt F> to select the File Menu. Exit MS-Works.
  299.  
  300.    7) Enter the HQFAX command, identify the ECL file that you wish to convert,
  301.       and enter the other conversion parameters as well.
  302.  
  303.  There apparently is no capability within MS-Works to customize your printer
  304.  driver.  This means that the custom print controls documented in the following
  305.  section will not be available to you. You will not be able to produce
  306.  over-sized characters. Sorry folks!
  307.  
  308.  
  309.  PRODUCING EPSON PRINT FILES FROM WORDPERFECT 5.1
  310.  
  311.    1) First, be sure that you have an EPSONLQ PRS file installed in your
  312.       WordPerfect directory.  This may require you to find your print driver
  313.       diskette from your WordPerfect diskettes.
  314.  
  315.    2) If you have not done so, create your WordPerfect document using all of
  316.       the features of the Epson-LQ printer. Find the Printer Commands section
  317.       in the WordPerfect for DOS Reference manual, pages 405,6. Study this
  318.       section to learn how to insert the HQFAX Custom Print controls into your
  319.       WordPerfect document to produce oversized characters.
  320.  
  321.    3) From the WordPerfect main menu, enter <Shift>F7 to select the print menu.
  322.       From the Print menu, enter 'S' to select a printer.  Use the arrow keys
  323.       to position the cursor to the Epson LQ-510. Enter 'E' to edit the printer
  324.       selection.  Enter 'P' to modify the printer port. Use the arrow keys to
  325.       position the cursor over the selection OTHER.  Now enter the name of the
  326.       disk file that WordPerfect will print to.  Remember the ".ECL" file
  327.       extension.  Store the ECL file in your C:\WP directory or C:\hqfax.
  328.  
  329.    4) From the WordPerfect main menu, print the current document to the .ECL
  330.       file.
  331.  
  332.    5) Exit WordPerfect, run the HQFAX command, identify the ECL file that you
  333.       wish to convert, and enter the other conversion parameters as well.
  334.  
  335.  
  336.  PRODUCING EPSON PRINT FILES FROM WORDSTAR 5.0
  337.  
  338.    1) If you have not done so, create your WordStar document using all of the
  339.       features of an Epson-LQ printer. You will need to have set up a PDF for
  340.       an EPSON-LQ printer. This PDF should write to a disk file. Find the
  341.       Custom Print Controls section in your WordStar Reference manual, page 30.
  342.       Study this section to be able to insert the HQFAX Custom Print Controls
  343.       into your WordStar document to make oversized characters.
  344.  
  345.    2) From the WordStar main menu, enter <Alt F> to display the File Menu. Use
  346.       the arrow keys to select the Print option.
  347.  
  348.    3) From the Print Setup screen, hit the <ENTER> key continuously until the
  349.       cursor is in the printer field. Use the arrow keys to select the EPSONLQ
  350.       printer from the directory of printers below. You should have a PDF set
  351.       up for an EPSON LQ-500 printer to write to a disk file.
  352.  
  353.    4) Hit the <ENTER> key until the cursor is in the field
  354.       "Redirect to output port".  Enter the filename with the ".ECL" file
  355.       extension. Store the ECL file in your C:\WordStar directory or C:\hqfax.
  356.  
  357.    5) Exit WordStar, run the HQFAX command, identify the ECL file that you
  358.       wish to convert, and enter the other conversion parameters as well.
  359.  
  360.  
  361.  PRODUCING EPSON PRINT FILES FROM WINDOWS APPLICATIONS
  362.  
  363.  To use HQFAX with any Windows application, you must select an EPSON 24-pin
  364.  Letter-Quality printer (LQ-500 or similar model) as your active printer and
  365.  select "On File" as the output device. Here's how.
  366.  
  367.  1) From the Program Manager Panel, activate (double-click on) Main.
  368.  
  369.  2) From Main, activate (double-click on) Control Panel.
  370.  
  371.  3) From Control Panel, activate Printers.
  372.  
  373.  4) From the list of available printers in the pull-down menu, select
  374.     an EPSON-LQ.
  375.  
  376.  5) From the Printer pull-down menu, select Printer Setup.
  377.  
  378.  6) Click on the Connect button. From the pull-down menu of output devices,
  379.     choose "On File". This will redirect Epson-LQ printer output to a disk
  380.     file which you will name when you are ready to print the document.
  381.  
  382.  7) Inside the Printer Setup panel, make sure that this is the active
  383.     printer.
  384.  
  385.  Your Epson 24 pin printer is now active and you can print your document using
  386.  the Print option of the File pull-down menu.  When you select the print
  387.  option, Windows will prompt you for an output file name. Enter a filename with
  388.  the ".ECL" file extension so that HQFAX can find it. Now you are ready to
  389.  convert and FAX the document.  You need not exit Windows! Simply exit your
  390.  word processor, go to the Program Manager window and click on the DOS prompt.
  391.  You can run HQFAX to convert and send your document from the DOS prompt within
  392.  Windows.
  393.  
  394.  There apparently is no capability within MS-Windows to customize your Epson
  395.  printer driver.  This means that the custom print controls documented in the
  396.  following section will not be available to you.  You will not be able to
  397.  produce over-sized characters with the Windows printer driver.  If you wish to
  398.  make use of the Over-sized characters, you must install the EPSON-LQ printer
  399.  driver provided with your word processor if available. You will need to
  400.  customize it by adding the Special Print Controls listed below. Consult the
  401.  user manual for your word  processor for specific information about creating
  402.  Custom Print Controls.
  403.  
  404.  
  405.  USING VARIOUS TYPE SIZES
  406.  
  407.  The  fancier EPSON-LQ printers provide for a range of type sizes from 8 points
  408.  to 32 points.  HQ-FAX  faithfully interprets the EPSON-LQ printer commands
  409.  which alter the pitch and point-size of the characters to be printed
  410.  (or FAXed).  If you have a print driver with your word processor for an EPSON
  411.  ESC/P2 printer, you will be able produce the range of type sizes mentioned
  412.  above, directly from your word processor.
  413.  
  414.  The EPSON ESC/P2 printers are: ActionPrinter 5000, LQ-570, LQ-870, LQ-1070 and
  415.  LQ-1170.  IF you do not have a print driver available for one of the above
  416.  listed printers, you will appreciate the following.
  417.  
  418.  
  419.  EPSON CUSTOM PRINT CONTROLS
  420.  
  421.  HQ-FAX offers a few Custom Print Controls to enhance the FAX images.  The
  422.  specifics of producing these Custom Print Controls within documents varies
  423.  from one word processor to another.  Please see the section Producing Epson
  424.  Print Files for information  regarding having your word processor produce
  425.  Custom Print Controls that work together properly with HQ-FAX.
  426.  
  427.  
  428.  The Custom Print Controls offered by HQFAX are:
  429.  
  430.  <Cntl>E (hex 05) This control code indicates Double-size characters to
  431.       HQFAX. It is a toggle switch, meaning that the first occurrence of
  432.       <Cntl>E turns on Oversize and the next occurrence turns it off.
  433.  
  434.  <Cntl>F (hex 06) This control code indicates  Triple  size characters to
  435.       HQFAX. It is a toggle switch as well. The first occurrence of <Cntl>F
  436.       turns on Triple-size, the next turns it off.
  437.  
  438.  <Cntl>G (hex 07) This control code indicates ~Quad~ sized characters to
  439.        HQFAX.  It too is a toggle switch, The first occurrence of <Cntl>G turns
  440.        on Quad-size, the next turns it off.
  441.  
  442.  <Cntl>Q (hex 11) This control code indicates Double-Height characters to HQFAX.
  443.       It  too  is  toggle switch, meaning that the first occurrence of  <Cntl>Q
  444.       turns on Double-Height,the next turns it off.
  445.  
  446.  <Cntl>W (hex 17) This control code indicates Double-Wide characters to
  447.      HQFAX. It too is a toggle switch. The first occurrence of <Cntl>^W
  448.       turns on Double-wide, the next turns it off.
  449.  
  450.  When using these features, the user must account for the fact that the
  451.  over-sized characters are taller and/or wider than normal characters, and
  452.  format the page accordingly.  When your word processor puts a page number or
  453.  footnote at the bottom of a page, HQFAX will do the courtesy of removing
  454.  whitespace near the bottom of the page in order to make room for the page
  455.  number or footnote.
  456.  
  457. =============================================================================
  458. 6) DEFINITION OF SHAREWARE
  459. =============================================================================
  460. Shareware distribution gives users a chance to try software before buying.
  461. If you try a Shareware program and continue using it, you are expected to
  462. register. Individual programs differ on details, some request registration
  463. while others require it, some specify a maximum trial period. With
  464. registration, you get anything from the simple right to continue using the
  465. software to an updated program with printed manual.
  466.  
  467. Copyright laws apply to both Shareware and commercial software, and the
  468. copyright holder retains all rights, with a few specific exceptions as
  469. stated below. Shareware authors are accomplished programmers, just like
  470. commercial authors, and the programs are of comparable quality.
  471. (In both cases, there are good programs and bad ones)! The main difference
  472. is in the method of distribution. The author specifically grants the right
  473. to copy and distribute the software, either to all and sundry or to a
  474. specific group. For example, some authors require written permission
  475. before a commercial disk vendor may copy their Shareware.
  476.  
  477. Shareware is a distribution method, not a type of software. You should
  478. find software that suits your needs and pocketbook, whether it's commer-
  479. cial or Shareware. The Shareware system makes fitting your needs easier,
  480. because you can try before you buy. And because the overhead is low,
  481. prices are low also. Shareware has the ultimate money-back guarantee --
  482. if you don't use the product, you don't pay for it.
  483.  
  484. You must treat this software just like a book.  An example is that this
  485. software may be used by any number of people and may be freely moved from
  486. one computer location to another, so long as there is no possibility of it
  487. being used at one location while it's being used at another. Just as a book
  488. cannot be read by two different persons at the  same time.
  489.  
  490. You are encouraged to pass a copy of HQ-FAX along to your friends for
  491. evaluation. Please encourage them to register their copy if they find that
  492. they can use it.  All registered users will receive a copy of the latest
  493. version of the HQ-FAX product.
  494.  
  495. Commercial users of HQ-FAX must register and pay for their copies of
  496. HQ-FAX within 30 days of first use or their license is withdrawn.
  497. Site-License arrangements may be made by contacting HTF Consulting at the
  498. address listed below.
  499.  
  500. Anyone distributing HQ-FAX for any kind of remuneration must first contact
  501. HTF Consulting at the address below for authorization. This authorization
  502. will be automatically granted to distributors recognized by the (ASP) as
  503. adhering to its guidelines for shareware distributors, and such distributors
  504. may begin offering HQ-FAX immediately. However HTF Consulting must be
  505. advised so that the distributor can be kept up-to-date with the latest
  506. version of HQ-FAX).
  507.  
  508. =============================================================================
  509. 7) ASP OMBUDSMAN STATEMENT
  510. =============================================================================
  511. The ASP Board has set up an office of Ombudsman and appointed an ASP member
  512. as Ombudsman. The Ombudsman's sole role is to mediate disputes between ASP
  513. members and their customers. The Ombudsman reports to the Board situations
  514. where he/she feels Board action or knowledge is appropriate.
  515.  
  516. All ASP Members and Associate Members are required to cooperate with the
  517. Ombudsman when so requested. The following text is required by the ASP.
  518.  
  519. [This program is produced by HTF Consulting, a member of the Association
  520. of Shareware Professionals (ASP). ASP wants to make sure that the shareware
  521. principle works for you. If you are unable to resolve a shareware-related
  522. problem with an ASP member by contacting the member directly, ASP may be
  523. able to help. The ASP Ombudsman can help you resolve a dispute or problem
  524. with an ASP member, but does not provide technical support for members'
  525. products. Please write to the ASP Ombudsman at 545 Grover Road, Muskegon,
  526. MI, 49442-9427 USA, FAX 616-788-2765 or send a CompuServe message via
  527. CompuServe Mail to ASP Ombudsman 70007,3536.]
  528.  
  529. =============================================================================
  530. 8) DISCLAIMER - AGREEMENT
  531. ============================================================================
  532. Users of HQ-FAX must accept this disclaimer of warranty:
  533. "HQ-FAX is supplied as is. The author disclaims all warranties, expressed
  534. or implied, including, without limitation, the warranties of merchant-
  535. ability and of fitness for any purpose. The author assumes no liability for
  536. damages, direct or consequential, which may result from the use of HQ-FAX."
  537.  
  538. ============================================================================
  539. 9) REGISTRATION INFORMATION
  540. ============================================================================
  541. HQ-FAX is a "shareware program" and is provided at no charge to the user
  542. for evaluation. Feel free to share it with your friends, but please do
  543. not give HQ-FAX away altered or as part of another system. The essence of
  544. "user-supported" software is to provide personal computer users with
  545. quality software without high prices, and yet to provide incentive for
  546. programmers to continue to develop new products.
  547.  
  548. If you find this program useful and find that you are using HQ-FAX regularly
  549. after a 30 day trial period, you should register and make a payment to HTF
  550. Consulting of $42.00 + $3.00 Shipping & Handling ($45.00 total). The $42.00
  551. registration fee will license one copy for use on any one computer.
  552.  
  553. You may use the automated registration procedure with HQ-FAX,
  554. (Function Key F8).  From here you may FAX in your registration, or print
  555. the screen, fill in the necessary information and mail it to the address below.
  556. HTF Consulting
  557. 436 Whitehall Rd. Suite F
  558. Alameda, Ca. 94501
  559.  
  560. You may use the automated registration form on our WWW Home Page.
  561. This form may be found at: http://www.execpc.com/~htfcons
  562.  
  563. Registration benefits will include but may not be limited to the following:
  564.   1) A 70 page user manual full of how-to information & clearly written
  565.      technical information about Group-3 FAX and related subjects.
  566.   2) Activation of additional features like:
  567.      a) FAX logging,           b) a user-specifed title in the FAX banner line,
  568.      c) scheduling of FAXes,   d) broadcasting (group FAXing),
  569.      e) documentation of the command line interface,
  570.      f) FAXing a set of files together,
  571.   3) 1 business day turn around for technical questions through
  572.      CompuServe [72240, 1745]
  573.   4) 120 calendar days of telephone support (one business day turnaround).
  574.   5) Technical problems requiring a software fix will be addressed ASAP.
  575.   6) An option to purchase one or more sets of commercial pre-printed
  576.      forms (digitized) which work with and enhance the product.
  577.   7) Free upgrades on a Semi-annual basis. (Frequent suggestions for
  578.      enhancements will be implemented as resources permit).
  579.   8) A $37.00 credit towards the purchase of One-Step FAXHAVEN, a package which
  580.      will make processsing of received FAXes a 1-STEP snap for DOS users.
  581.      FAXHAVEN will be priced at $62.00.  You can save $5.00 by purchasing
  582.      FAXHAVEN when you register HQ-FAX.  See the screen shots below for a
  583.      picture of FAXHAVEN's many powerful features.
  584.  
  585. That's it! We're ready to go. Start by entering "HQFAX" at the DOS prompt.
  586. Once again the mailing address for HTF Consulting is:
  587. HTF Consulting
  588. 436 Whitehall Rd. Suite F,
  589. Alameda, CA. 94501
  590. 510.521.1689
  591. FAX 510.521.2987
  592.  
  593. ============================================================================
  594. 10) FAXHAVEN SCREEN SHOTS
  595. ============================================================================
  596. +----------------------------------------------------------------------------+
  597. | *****                    One-Step FAXHAVEN ver. 3.x                   *****|
  598. | ***                 Copyright (c) 1996 by HTF Consulting                ***|
  599. | *                                                                         *|
  600. | Registration key _______                                                   |
  601. |                                                                            |
  602. |                          <F1> Help                                         |
  603. |                          <F2> Configuration Setup                          |
  604. |                                                                            |
  605. |                          <F3> Activate FAX Receive                         |
  606. |                          <F4> Deactivate FAX Receive                       |
  607. |                                                                            |
  608. |                          <F5> Process Received FAXes                       |
  609. |                                                                            |
  610. |                          <F6> Sleep System / Wake System                   |
  611. |                                                                            |
  612. |                          <F7> Prepare/Send a FAX (HQ-FAX)                  |
  613. |                          <F8> FAXHAVEN Registration                        |
  614. |                                                                            |
  615. |                          <F9> DOS Shell                                    |
  616. |                         <ESC> Exit                                         |
  617. |                                                                            |
  618. |                  Select a menu option with a Function Key                  |
  619. +----------------------------------------------------------------------------+
  620. |                 Line 25 is a status line for error messages                |
  621. +----------------------------------------------------------------------------+
  622. | *****                    One-Step FAXHAVEN ver. 3.x                   *****|
  623. | ***                          Configuration Setup                        ***|
  624. | *                   Copyright (c) 1996 by HTF Consulting                  *|
  625. |                                                                            |
  626. | Registration key _______                                                   |
  627. |                                                                            |
  628. | FAX modem class // modem software __              Comm Port _              |
  629. |      FAX Receive directory ____________________   Receive Filext.___       |
  630. |                                                                            |
  631. |   Activate Receive command ______________________________________          |
  632. |            Receive options ______________________________________          |
  633. | Deactivate Receive command ______________________________________          |
  634. | Send Options _____________________________________________________________ |
  635. |                                                                            |
  636. | Print command ______________________________  Print device: __  Format ___ |
  637. |                                                                            |
  638. |  Graphic Convert command ______________________________________            |
  639. | Graphic output directory ____________________                              |
  640. |    Default Export format ___                                               |
  641. |                                                                            |
  642. |        Archive directory ____________________                              |
  643. |                                                                            |
  644. |     F1=Help, F2=Load Defaults, F9=Restore Scrn, F10=Save ScrnESC=Exit      |
  645. +----------------------------------------------------------------------------+
  646. |                 Line 25 is a status line for error messages                |
  647. +----------------------------------------------------------------------------+
  648. | *****                    One-Step FAXHAVEN ver. 3.x                   *****|
  649. | ***                          Receive Processing                         ***|
  650. | *                   Copyright (c) 1996 by HTF Consulting                  *|
  651. |                                                                            |
  652. | List files since __\__\__  __:__                                           |
  653. | Input directory ____________________  File ext.___                         |
  654. |                                                                            |
  655. | Sel  Files         Rcv Date-Time    File size      Station ID              |
  656. | _    ________ ___  ________ _______ _____________  ___________________     |
  657. | _    ________ ___  ________ _______ _____________  ___________________     |
  658. | _    ________ ___  ________ _______ _____________  ___________________     |
  659. | _    ________ ___  ________ _______ _____________  ___________________     |
  660. | _    ________ ___  ________ _______ _____________  ___________________     |
  661. | _    ________ ___  ________ _______ _____________  ___________________     |
  662. | _    ________ ___  ________ _______ _____________  ___________________     |
  663. | _    ________ ___  ________ _______ _____________  ___________________     |
  664. | _    ________ ___  ________ _______ _____________  ___________________     |
  665. | _    ________ ___  ________ _______ _____________  ___________________     |
  666. |                                                                            |
  667. |                                                                            |
  668. | <ESC>=Exit F1=Help, F2=Get Files, F3=Prev Scrn, F4=Next Scrn,12=Select all |
  669. |       F5=View, F6=Print, F7=Send, F8=Graphic Convert, F9=Arche, F20=Purge  |
  670. +----------------------------------------------------------------------------+
  671. |                 Line 25 is a status line for error messages                |
  672. +----------------------------------------------------------------------------+
  673. | *****                    One-Step FAXHAVEN ver. 3.x                   *****|
  674. | ***                           View Processing                           ***|
  675. | *                   Copyright (c) 1996 by HTF Consulting                  *|
  676. |                                                                            |
  677. | List files since __\__\__  __:__                                           |
  678. | Input directory ____________________  File ext ___                         |
  679. | View options: Wide(y/n)? _  Header(y/n)? _                                 |
  680. |                                                                            |
  681. | Vu  Files         Rcv Date-Time    File size      Station ID               |
  682. | __  ________ ___  ________ _______ _____________  ___________________      |
  683. | __  ________ ___  ________ _______ _____________  ___________________      |
  684. | __  ________ ___  ________ _______ _____________  ___________________      |
  685. | __  ________ ___  ________ _______ _____________  ___________________      |
  686. | __  ________ ___  ________ _______ _____________  ___________________      |
  687. | __  ________ ___  ________ _______ _____________  ___________________      |
  688. | __  ________ ___  ________ _______ _____________  ___________________      |
  689. | __  ________ ___  ________ _______ _____________  ___________________      |
  690. | __  ________ ___  ________ _______ _____________  ___________________      |
  691. | __  ________ ___  ________ _______ _____________  ___________________      |
  692. |                                                                            |
  693. |  <ESC>=Exit                                                                |
  694. |  F1=Help, F2=Get Files, F3=Prev Scrn, F4=Next Scrn, F5=View, 2=Select all  |
  695. +----------------------------------------------------------------------------+
  696. |                 Line 25 is a status line for error messages                |
  697. +----------------------------------------------------------------------------+
  698. | *****                    One-Step FAXHAVEN ver. 3.x                   *****|
  699. | ***                           Print Processing                          ***|
  700. | *                   Copyright (c) 1996 by HTF Consulting                  *|
  701. |                                                                            |
  702. | List files since __\__\__  __:__                                           |
  703. | Input directory ____________________  File ext ___                         |
  704. | Print options:  Spool(y/n)?_  Condensed(y/n)?_                             |
  705. |                                                                            |
  706. | Prn  Files         Rcv Date-Time    File size      Station ID              |
  707. | __   ________ ___  ________ _______ _____________  ___________________     |
  708. | __   ________ ___  ________ _______ _____________  ___________________     |
  709. | __   ________ ___  ________ _______ _____________  ___________________     |
  710. | __   ________ ___  ________ _______ _____________  ___________________     |
  711. | __   ________ ___  ________ _______ _____________  ___________________     |
  712. | __   ________ ___  ________ _______ _____________  ___________________     |
  713. | __   ________ ___  ________ _______ _____________  ___________________     |
  714. | __   ________ ___  ________ _______ _____________  ___________________     |
  715. | __   ________ ___  ________ _______ _____________  ___________________     |
  716. | __   ________ ___  ________ _______ _____________  ___________________     |
  717. |                                                                            |
  718. | <ESC>=Exit                                                                 |
  719. |  F1=Help, F2=Get Files, F3=Prev Scrn, F4=Next Scrn, F6=Print,12=Select all |
  720. +----------------------------------------------------------------------------+
  721. |                 Line 25 is a status line for error messages                |
  722. +----------------------------------------------------------------------------+
  723. | *****                    One-Step FAXHAVEN ver. 3.x                   *****|
  724. | ***                            Send Processing                          ***|
  725. | *                   Copyright (c) 1996 by HTF Consulting                  *|
  726. |                                                                            |
  727. | List files since __\__\__  __:__                                           |
  728. | Input directory ____________________  File ext ___                         |
  729. | Send Options _____________________________________________________________ |
  730. |                                                                            |
  731. | Sel  Files         Rcv Date-Time     Send to                               |
  732. | _    ________ ___  ________ _______  __________________________________    |
  733. | _    ________ ___  ________ _______  __________________________________    |
  734. | _    ________ ___  ________ _______  __________________________________    |
  735. | _    ________ ___  ________ _______  __________________________________    |
  736. | _    ________ ___  ________ _______  __________________________________    |
  737. | _    ________ ___  ________ _______  __________________________________    |
  738. | _    ________ ___  ________ _______  __________________________________    |
  739. | _    ________ ___  ________ _______  __________________________________    |
  740. | _    ________ ___  ________ _______  __________________________________    |
  741. | _    ________ ___  ________ _______  __________________________________    |
  742. |                                                                            |
  743. |  <ESC>=Exit                                                                |
  744. |  F1=Help, F2=Get Files, F3=Prev Scrn, F4=Next Scrn, F7=Send, 2=Select all  |
  745. +----------------------------------------------------------------------------+
  746. |                 Line 25 is a status line for error messages                |
  747. +----------------------------------------------------------------------------+
  748. | *****                    One-Step FAXHAVEN ver. 3.x                   *****|
  749. | ***                          Convert Processing                         ***|
  750. | *                   Copyright (c) 1996 by HTF Consulting                  *|
  751. |                                                                            |
  752. | List files since __\__\__  __:__                                           |
  753. | Input directory ____________________  File ext ___                         |
  754. | Output directory ____________________              Output Fort ___         |
  755. |                                                                            |
  756. | Sel  Files         Rcv Date-Time    File size      Target    ormat         |
  757. | _    ________ ___  ________ _______ _____________  ________  __            |
  758. | _    ________ ___  ________ _______ _____________  ________  __            |
  759. | _    ________ ___  ________ _______ _____________  ________  __            |
  760. | _    ________ ___  ________ _______ _____________  ________  __            |
  761. | _    ________ ___  ________ _______ _____________  ________  __            |
  762. | _    ________ ___  ________ _______ _____________  ________  __            |
  763. | _    ________ ___  ________ _______ _____________  ________  __            |
  764. | _    ________ ___  ________ _______ _____________  ________  __            |
  765. | _    ________ ___  ________ _______ _____________  ________  __            |
  766. | _    ________ ___  ________ _______ _____________  ________  __            |
  767. |                                                                            |
  768. | <ESC>=Exit                                                                 |
  769. | F1=Help, F2=Get Files, F3=Prev Scrn, F4=Next Scrn, F8=Convrt,12=Select all |
  770. +----------------------------------------------------------------------------+
  771. |                 Line 25 is a status line for error messages                |
  772. +----------------------------------------------------------------------------+
  773. | *****                    One-Step FAXHAVEN ver. 3.x                   *****|
  774. | ***                          Archive Processing                         ***|
  775. | *                   Copyright (c) 1996 by HTF Consulting                  *|
  776. |                                                                            |
  777. | List files since __\__\__  __:__                                           |
  778. | Input directory ____________________  File ext ___                         |
  779. | Output directory ____________________              Output Fort: FHA        |
  780. |                                                                            |
  781. | Sel  Files         Rcv Date-Time    File size      Target    ormat         |
  782. | _    ________ ___  ________ _______ _____________  ________  __            |
  783. | _    ________ ___  ________ _______ _____________  ________  __            |
  784. | _    ________ ___  ________ _______ _____________  ________  __            |
  785. | _    ________ ___  ________ _______ _____________  ________  __            |
  786. | _    ________ ___  ________ _______ _____________  ________  __            |
  787. | _    ________ ___  ________ _______ _____________  ________  __            |
  788. | _    ________ ___  ________ _______ _____________  ________  __            |
  789. | _    ________ ___  ________ _______ _____________  ________  __            |
  790. | _    ________ ___  ________ _______ _____________  ________  __            |
  791. | _    ________ ___  ________ _______ _____________  ________  __            |
  792. |                                                                            |
  793. | <ESC>=Exit                                                                 |
  794. | F1=Help, F2=Get Files, F3=Prev Scrn, F4=Next Scrn, F8=Convrt,12=Select all |
  795. +----------------------------------------------------------------------------+
  796. |                 Line 25 is a status line for error messages                |
  797.