home *** CD-ROM | disk | FTP | other *** search
-
- PRINT SELECTION FOR APAR - II06534 93/04/27
- PIN INFO-PC-LIB-097 II06534-IN-INCORROUT
- F - - -
- CM ES 1.0 GATEWAY INFORMATIONAL APAR
-
- END OF ABSTRACT FESN5NFO000-000
- REPORTED RELEASE R001
- ERROR DESCRIPTION:
- +-------------------------------------------------------------+
- |II06534 |
- | COMMUNICATIONS MANAGER INFORMATION APAR |
- | |
- | COMMUNICATIONS MANAGER ES/1 |
- | GATEWAY INFORMATION |
- | |
- |LAST UPDATE: 12/17/92 BY: RHB |
- | |
- |PURPOSE: THIS INFORMATION APAR PROVIDES INFORMATION ON |
- | CM ES 1.0 SNA GATEWAY FEATURE |
- | |
- +-------------------------------------------------------------+
- |
- | OVERVIEW:
- |
- | 1.Information.
- | 2.Frequent Problems.
- | 2.Documentation required to analize CM Gateway problems.
- |
- |
- |
- +-------------------------------------------------------------+
- | 1. Information. |
- +-------------------------------------------------------------+
- |
- | 1. 11/23/92
- | Reference "Extended Services for OS/2 Communications
- | Manager Configuration Guide", S04G100200. "Chapter 9.
- | SNA Gateway Feature".
- |
- | 2. 12/17/92
- | IBM Extended Services for OS/2 Communications
- | Manager New Features and and Enhancements
- | GG243876
- |
- | 3. 12/17/92
- | Extended Services for OS/2 Communications
- | Manager Tuning Guide for the Lan Adapter
- | and Protocal Support ( LAPS ) Feature
- | GG663243
- |
- +-------------------------------------------------------------+
- | 2.Frequent Problems. |
- +-------------------------------------------------------------+
- |
- | 1. 11/23/92
- | PROBLEM: -COMM695 on Downstream Workstations.
- | -ACS1231 on Downstream Workstations.
- | -XID failure
- | -Only some Downstream Workstations Connect.
- | -RANDOM COMM695 on Downstream Workstations.
- | -Message LT20030 on the Gateway Workstation
- | in the LANTRAN.LOG.
- | -Cannot establish sessions with more than
- | 64 workstations.
- | SOLUTION: On the CM SNA GATEWAY workstation, change
- | the following configuration items for the
- | Token-ring card connecting the Downstream
- | workstations:
- |
- | -Use the REFERENCE DISKETTE and set the
- | Token-Ring card to use a shared RAM SIZE
- | OF 64K.
- |
- | -In the CM configuration for the Token-Ring
- | Data Link Control change the max. number
- | of link stations from to 128.
- |
- | -In the CM configuration for the Lan Adapter
- | and Protocol support, make sure the Max.
- | number of link stations is 255.
- |
- | -In the LAN adapter and protocol support (LAPS)
- | IEEE 802.2 profile increase the Timer Control
- | Blocks setting to 128.
- +-------------------------------------------------------------+
- | 2. Documentation. |
- +-------------------------------------------------------------+
- |
- | 11/23/92
- |
- |
- | On the CM Gateway, and on one of the failing
- | downstream workstations:
- |
- | Please AUTOSTART the following CM traces:
- | Under TRACE SELECTIONS choose: APPC & IBMTRNET
- | Under ADVANCE TRACE SELECTIONS choose:
- | EVENTS 1,2,3,4,5 AND 12.
- | Trace record size: 128
- | Trace storage size: 16 X 64
- | Reference Inforamational APAR II06459.
- |
- | Stop Communications Manager and in CMLIB sub-directory,
- | erase ERROR.DAT and MESSAGE.DAT.
- |
- | If CM Level 2 requested a trace of the IEE802.2 frames:
- |
- | On the CM Gateway and the Downstream workstation add the
- | following trace parameters to the files as listed below.
- | These parameters will start a trace of the IEE802.2 flow.
- |
- | In CONFIG.SYS add after the FILES=xxx statement:
- | TRACEBUF=63
- | TRACE=ON 164
- |
- | In PROTOCOL.INI under LANDD_nif add after
- | "Bindings = IBMTOK_nif":
- | TRACE = 0x03FE
- |
- | In PROTOCOL.INI under NETBEUI_nif add after
- | "Bindings = IBMTOK_nif"
- | OS2TRACEMASK = 0
- |
- |
- | REBOOT THE MACHINE.
- |
- |
- | Recreate the problem.
- |
- | Stop the traces after the session fails to establish.
- |
- | "DS.*" indicates the files are from the Downstream
- | Workstation.
- | "GW.*" indicates the files are from the Gateway
- | Workstation.
- |
- | If CM Level 2 requested a trace of the IEE802.2 frames:
- | These commands will stop and save the IEE802.2 trace:
- | On the CM Gateway and the Downstream workstation,
- | in an OS/2 Window enter:
- | TRACE OFF
- | TRACEFMT
- | (Using the pull down menus, save the files as
- | A:"pmr number"DS.802 and A:"pmr number"GW.802)
- |
- | On the CM Gateway, copy the CM trace to a file called
- | A:"pmr number"GW.TRC
- |
- | On the Downstream workstation, copy the CM trace to a
- | file called
- | A:"pmr number"DS.TRC
- |
- | Obtain the following Subsystem Management information:
- |
- | When the downstream workstation receives the COMM695,
- | on the CM MAIN MENU on the GATEWAY workstation,
- | Chose ADVANCED,
- | SUBSYSTEM MANAGEMENT,
- | DISPLAY ACTIVE SNA CONFIGURATION,
- | (This is a PM panel),
- | Chose OPTIONS from the action bar,
- | then, DISPLAY TO FILE, call the file "pmrno".fil
- | Chose DISPLAY from the action bar
- | then, GENERAL SNA,
- | then, LINKS,
- | Chose DISPLAY from the action bar,
- | then GENERAL SNA,
- | then SNA GATEWAY,
- | Chose DISPLAY from the action bar,
- | then GENERAL SNA,
- | then SNA LINK DEFINITIONS
- | Then END PMDISPLAY
- |
- | On the CM Gateway:
- |
- | PLEASE COPY THE FOLLOWING FILES TO DISKETTE ALSO:
- | drive: CMLIB user.CFG A:"pmr number"GW.CFG
- | drive: CMLIB APPN user.CF2 A:"pmr number"GW.CF2
- | drive: CMLIB APPN user.NDF A:"pmr number"GW.NDF
- | drive: CMLIB APPN user.LOG A:"pmr number"GW.LOG
- | drive: CMLIB APPN user.SEC A:"pmr number"GW.SEC
- | drive: IBMCOM user.INI A:"pmr number"GW.INI
- | drive:CONFIG.SYS A:"pmr number"GW.SYS
- | drive: CMLIB MESSAGE.DAT A:"pmr number"GW.MSG
- | drive: CMLIB ERROR.DAT A:"pmr number"GW.ERR
- | drive: IBMCOM LANTRAN.LOG A:"pmr number"GW.LTL
- | drive: IBMCOM PROTOCOL.INI A:"pmr number"GW.PIN
- |
- |
- |
- | On the failing downstream workstations:
- |
- | PLEASE COPY THE FOLLOWING FILES TO DISKETTE ALSO:
- | drive: CMLIB user.CFG A:"pmr number"DS.CFG
- | drive: CMLIB APPN user.CF2 A:"pmr number"DS.CF2
- | drive: CMLIB APPN user.NDF A:"pmr number"DS.NDF
- | drive: CMLIB APPN user.LOG A:"pmr number"DS.LOG
- | drive: CMLIB APPN user.SEC A:"pmr number"DS.SEC
- | drive: IBMCOM user.INI A:"pmr number"DS.INI
- | drive:CONFIG.SYS A:"pmr number"DS.SYS
- | drive: CMLIB MESSAGE.DAT A:"pmr number"DS.MSG
- | drive: CMLIB ERROR.DAT A:"pmr number"DS.ERR
- | drive: IBMCOM LANTRAN.LOG A:"pmr number"DS.LTL
- | drive: IBMCOM PROTOCOL.INI A:"pmr number"DS.PIN
- |
- | Please send the documentation to IBM Communications Manager
- | Level 2 as documented in INFO APAR II06001.
- |
- |
- +-------------------------------------------------------------+
- |KEYWORDS: CMINFO 562121301 R100 566933602 R130 CM |
- | CM GATEWAY SNAGATE COMM695 COM695 COM 695 |
- | WORKSTATIONS NOT CONNECTING. |
- | ACS1231 MSGACS1231 |
- | |
- +-------------------------------------------------------------+
- |
- COMMENTS:
- See the update above.
- CIRCUMVENTION:
- REPINNED 92/12/17 RALFS/RHB
- 92/12/17,UNKNOWN
-
-
-
-
-
-
-
-
-
-