home *** CD-ROM | disk | FTP | other *** search
-
- PRINT SELECTION FOR APAR - II06157 93/04/29
- PIN INFO-PC-LIB-088 II06157-IN-INCORROUT
- F - - -
- 5250WSF - CM ES/1 TO AS/400 CONFIGURATION
- CMINFO
- END OF ABSTRACT FESN5NFO000-000
- REPORTED RELEASE R001
- ERROR DESCRIPTION:
-
- +-------------------------------------------------------------+
- |II06157 |
- | COMMUNICATIONS MANAGER INFORMATION APAR |
- | |
- | CM ES/1 TO AS/400 CONFIGURATION |
- | INFORMATION |
- | |
- |LAST UPDATE: 04/29/93 BY: RHB |
- | |
- |PURPOSE: THIS INFORMATION APAR PROVIDES A LIST OF ITEMS TO |
- | CHECK TO MAKE SURE CM ES/1 AND THE AS/400 ARE |
- | CORRECTLY CONFIGURED. |
- | |
- +-------------------------------------------------------------+
- |
- | OVERVIEW:
- |
- | A. CHECKLIST FOR CM ES/1 CONFIGURATION
- | B. CHECKLIST FOR AS/400 CONFIGURATION
- | C. PUBLICATION REFERENCES
- | D. ADDITIONAL INFORMATION
- |
- |
- +-------------------------------------------------------------+
- | A. CHECKLIST FOR CM ES/1 CONFIGURATION |
- +-------------------------------------------------------------+
- |12/17/92
- |
- | 1. Please verify the following CONFIGURATION VERB
- | definitions in the .NDF file.
- |
- | a) In the DEFINE_LOCAL_CP verb, the FQ_CP_NAME is
- | a unique name in the network.
- |
- | b) In the DEFINE_LOGICAL_LINK verb for the AS/400,
- | ADJACENT_NODE_TYPE(LEARN) is defined.
- |
- | c) In the DEFINE_LOGICAL_LINK verb for the AS/400,
- | CP_CP_SESSION_SUPPORT(YES) is defined.
- |
- |
- |
- | NOTE: The .NDF file is an ASCII file located in
- | CMLIB APPN. You can edit this file
- | to make changes. Please make a back-up copy
- | before changing the file. If you make any changes
- | please remember to VERIFY the CM configuration
- | thru CM's ADVANCED, CONFIGURATION panels.
- |
- |
- +-------------------------------------------------------------+
- | B. CHECKLIST FOR AS/400 CONFIGURATION |
- +-------------------------------------------------------------+
- |12/17/92
- |
- | 1. Please verify the following AS/400 Controller
- | definitions.
- |
- | a) APPN CP session support, CPSSN is defined as
- | ' *YES '.
- |
- | b) APPN node type, NODETYPE is defined as
- | ' *CALC '.
- |
- |
- +-------------------------------------------------------------+
- | C. PUBLICATION REFERENCES |
- +-------------------------------------------------------------+
- | 12/17/92
- |
- | 1. IBM Extended Services for OS/2 Host Connection
- | Reference, S04G-1004, Chapter 2. IBM AS/400 Host
- | Programming.
- |
- | 2. IBM Extended Services for OS/2 Communications Manager
- | System Management Programming Reference, S04G-1116,
- | Chapter 5 Configuration Verbs.
- |
- |
- | 3. IBM Extended Services for OS/2 Communications Manager
- | Configuration Guide, S04G-1002, Chapter 14. 5250
- | Work Station Feature.
- |
- |
- +-------------------------------------------------------------+
- | D. ADDITIONAL INFORMATION |
- +-------------------------------------------------------------+
- |
- +-------------------------------------------------------------+
- | 12/17/92 TWINAX DRIVER. |
- +-------------------------------------------------------------+
- |
- | The ES1 Hardware and Software Reference, P1-9, lists two
- | drivers for TWINAX adapters, but it doesn't make clear
- | which is for the AT-type bus and which is for Microchannel.
- | T1P1NDD.SYS is for Microchannel, and T1P1SDD.SYS is the
- | driver for AT, ISA, or non-MCA machines.
- |
- +-------------------------------------------------------------+
- | SDLC CONNECTION TO AN OS400 - HINTS |
- +-------------------------------------------------------------+
- |
- | 1: Be sure the controller description on the
- | 400 uses an XID of 05D XXXXX. Apparently, DOS
- | pcsupport creates a description with a default
- | xid of 001 XXXXX.
- | Also, do not define role as negotiable;
- | The 400 should be primary, and the
- | workstation should be secondary
- |
- | 2: ES1 Basic config can insert a default
- | Partner Node Name (in the Network Definitions/
- | SNA Connections profile) of CP000002. This
- | should be changed to match the actual partner
- | node name of the host.
- |
- | 3: ES1 doesnt support autodial. If the modem
- | does not support manual dial, the following may
- | help: leave the modem off until the popup
- | message telling the user to dial the line
- | appears, then turn it on. This allowed one
- | customer to connect. For normal use, possibly
- | a delay can be put in the command stream so the
- | modem doesn't dial until Comm Mgr is ready.
- | This may take some experimentation.
- |
- +-------------------------------------------------------------+
- | 04/09/93 ACS0127 MESSAGE WHEN RESTARTING COMMUNICATIONS MGR |
- +-------------------------------------------------------------+
- |
- | Environment: AS/400 V2R1.1, OS/2 EE 1.3, and OS/2 PC Support
- | installed.
- |
- | Scenario: 1. Start OS/2 Communications Manager.
- | 2. Start OS/2 PC Support.
- | 3. End OS/2 Communications Manager
- | (Exit Immediately)
- | 4. Start OS/2 Communications Manager.
- | 5. Receive OS/2 Communications Manager error
- | message ACS0127 or ACS0127C.
- | ('Communications Manager is already started
- | or is being restarted and previous
- | application programs using it are still
- | active').
- |
- | Cause: AS/400 Shared Folders are still active in the
- | background.
- |
- | Solution: There is no way in OS/2 to end the background
- | task that controls Shared Folders. However, in
- | PC Support/400 V2R2 there is a program STOPFLR
- | which will end the task and let you restart
- | Communications Manager without a reboot.
- |
- +-------------------------------------------------------------+
- | 04/09/93 REMOTE CONTROL UNITS DO NOT SUPPORT SEGMENTING |
- +-------------------------------------------------------------+
- |
- | The 5394 & 5494 remote control unit devices do not support
- | segmenting. The RUSIZE parameter in the AS/400 controller
- | description should be smaller than 512 and should match
- | Communication Manager's RUSIZE exactly. Recommended size 496.
- |
- +-------------------------------------------------------------+
- |KEYWORDS: CMINFO 562121301 R100 5250WSF 5250 CM APPC APPN |
- | NDF CONFIG ACS0619W ACS0608W XID SDLC AUTODIAL |
- | 5250 WORK STATION FEATURE MODEM SHARED FOLDERS |
- | 08090049 001b 00000700 ACS0127 ACS0127C PC SUPPORT |
- | 5394 5494 RUSIZE RU SIZE SEGMENT CONTROLLER |
- | |
- +-------------------------------------------------------------+
- COMMENTS:
- SEE ERROR DESCRIPTION
- CIRCUMVENTION:
- REPINNED 12/17/92 RHB/RALFS
- REPINNED 12/17/92 RHB/RALFS
- REPINNED 04/29/93 RALFS/RHB
- 93/04/29,UNKNOWN
-
-
-
-
-