home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Phoenix CD 2.0
/
Phoenix_CD.cdr
/
11a
/
cdisk445.zip
/
CATDISK.DOC
next >
Wrap
Text File
|
1990-01-24
|
169KB
|
3,961 lines
DISK CATALOG SYSTEM (CATDISK)
USER'S GUIDE
Version 4.45
Jan 24, 1990
Copyright (C) 1986, 1990 By Rick Hillier
All Rights Reserved.
_______
____|__ | (tm)
--| | |-------------------
| ____|__ | Association of
| | |_| Shareware
|__| o | Professionals
-----| | |---------------------
|___|___| MEMBER
T A B L E O F C O N T E N T S
1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Dedication . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Licensing And Distribution . . . . . . . . . . . . . . . . . . 4
Public Domain And Shareware Libraries . . . . . . . . . . . . 5
ASP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2. GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . 6
What You Should Have Received . . . . . . . . . . . . . . . . 6
System Requirements . . . . . . . . . . . . . . . . . . . . . 6
Initial Note On Archive Files . . . . . . . . . . . . . . . . 6
Configuring CATDISK . . . . . . . . . . . . . . . . . . . . . 7
Upgrading From V3.61 or Later . . . . . . . . . . . . . . . . 11
General Considerations When Configuring CATDISK . . . . . . . 12
Sample Configurations . . . . . . . . . . . . . . . . . . . . 13
IMPORTANT NOTE . . . . . . . . . . . . . . . . . . . . . . . . 14
Starting CATDISK . . . . . . . . . . . . . . . . . . . . . . . 15
3. USING CATDISK . . . . . . . . . . . . . . . . . . . . . . . . . 18
Using The Menus . . . . . . . . . . . . . . . . . . . . . . . 18
Screen Report Options Available . . . . . . . . . . . . . . . 19
Selecting A Volume ID From A List . . . . . . . . . . . . . . 20
Option 1 - Set Drive For Cataloging . . . . . . . . . . . . . 21
Option 2 - Settings And Toggles Menu . . . . . . . . . . . . . 22
1 - Pauses On/Off . . . . . . . . . . . . . . . . . . . . 22
2 - Set Current Catalog File . . . . . . . . . . . . . . . 22
3 - Change Printer Report Type . . . . . . . . . . . . . . 23
4 - File Comments On The Fly . . . . . . . . . . . . . . 23
5 - Zip File Comment Copy . . . . . . . . . . . . . . . . 23
6 - Set Current Report Destination . . . . . . . . . . . 24
7 - Archive Extract Setting . . . . . . . . . . . . . . . 24
8 - Comments When ZIPS Not Extracted . . . . . . . . . . . 25
9 - Aliases On/Off . . . . . . . . . . . . . . . . . . . . 25
ESC - Return To Main Menu . . . . . . . . . . . . . . . . . 25
Option 3 - Labeling A Disk . . . . . . . . . . . . . . . . . 26
Option 4 - Cataloging A Disk . . . . . . . . . . . . . . . . 27
Option 5 - UnCataloging A Disk . . . . . . . . . . . . . . . 30
Option 6 - Show Disk Summary . . . . . . . . . . . . . . . . 31
Option 7 - Show Files For A Volume . . . . . . . . . . . . . 32
Option 8 - Show Files For An Archive . . . . . . . . . . . . 34
Option 9 - Show Selected Files . . . . . . . . . . . . . . . 36
Option 0 - Show ALL Files . . . . . . . . . . . . . . . . . 38
Option F1 - Add/Change File Comments . . . . . . . . . . . . 40
Option F2 - Show Files By Comment . . . . . . . . . . . . . 44
Option F3 - Temporarily Exit To DOS . . . . . . . . . . . . 45
Option <drive_letter> - Show Disk Directory . . . . . . . . 46
Option ESC - Exit To DOS . . .. . . . . . . . . . . . . . . 46
Appendix A - The Scroll Bar . . . . . . . . . . . . . . . . . . . 47
Appendix B - Archive Support . . . . . . . . . . . . . . . . . . 49
Appendix C - Support And Updates . . . . . . . . . . . . . . . . 51
Appendix D - Questions And Answers . . . . . . . . . . . . . . . 52
Appendix E - CATLOOK Command Line Lookup Utility . . . . . . . . 54
Appendix F - CATDISK PLUS . . . . . . . . . . . . . . . . . . . . 55
Appendix G - Other Products Available . . . . . . . . . . . . . . 56
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 1
T A B L E O F C O N T E N T S ( C O N T ' D )
CATDISK V4.45 Registration Form . . . . . . . . . . . . . . . . . 57
CATDISK V4.45 Site License Agreement . . . . . . . . . . . . . . 58
CATDISK V4.45 Vendor Application . . . . . . . . . . . . . . . . 59
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 2
1. I N T R O D U C T I O N
DEDICATION
This program is dedicated to the memory of my Grandfather, Earl Hillier
(Jan 1, 1909 - May 2, 1989).
OVERVIEW
Overheard: "I know I have that file in an archive on a disk SOMEWHERE!
If only I could FIND it!"
Sound familiar? Many people I know are in this predicament.
Enter CATDISK, the disk cataloging system. CATDISK can help you
organize your disks in such a way that it is easy to find a file from
within a large collection by creating a collective directory of all the
files contained in your collection. See the FEATURES section below for
a listing of CATDISK's capabilities.
FEATURES
. Completely menu-driven and very easy to use.
. Easy to use configuration utility allows customization of many of the
program's features.
. All screen colors can be customized to your liking.
. Command line options can be stored in the DOS environment area
negating the need to memorize them.
. Cataloging/Uncataloging/Re-cataloging functions are completely
automatic.
. A disk volume label can be changed from within CATDISK.
. You can catalog a disk under an alias instead of the physical volume
label.
. Can support up to 32,767 files or 2,000 disks per catalog,
whichever comes first.
. Supports multiple catalog files.
. This limit can be reduced through the configuration utility to better
optimize memory usage.
. Supports sub-directories up to 32 levels deep with an upper limit of
256 directories per disk being cataloged.
. Able to read the directory contents of .ARC, .DWC, .LBR, .LZH, .LZS,
.PAK, .ZIP, and .ZOO files. See the appendix on ARCHIVE SUPPORT in
this user manual for further details.
. Can read comments from ZIP, ZOO and DWC files.
. ARC, DWC, LBR, LZH, LZS, PAK, ZIP, and ZOO file extraction is
optional and can be decided while running the program.
. You can attach a 30 character comment to each file in the catalog.
This can be done either while cataloging a disk, or at a later time.
. Summary report shows disk capacity, space used and space free on
each disk in the catalog to aid in optimization of disk usage.
. Files can be viewed by DOS wildcards, Volume ID, ARCHIVE ID, or by
keywords or phrases in the file comments.
. Reports can be sent to screen, printer, or disk file.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 3
LICENSING AND DISTRIBUTION
CATDISK is copyright and has been released for distribution as
SHAREWARE. Please note that a great deal of effort and time has been
invested in the development of this program. You are granted a license
to try CATDISK for a reasonable trial period without risk. If, after
this time, you find the program useful and intend to use it in managing
your disk collection, you are expected to register.
The base registration fee is $20. This will entitle you to continue to
use CATDISK beyond a reasonable trial period as well as entitle you to
program support. You will find a registration form at the end of this
user manual that outlines the procedures for registering your copy of
the program. Should you decide that you would like the latest release
(or a pending release if you already have the latest) appropriate
information is contained on the same form.
Please keep in mind that I must have a registration form on file for
you before I can offer product support.
Operators of electronic bulletin boards (Sysops) are encouraged to post
CATDISK for downloading by their users.
CATDISK may be uploaded to and downloaded from commercial systems such
as CompuServe, the Source, and BIX, so long as the only charge paid by
the subscriber is for on-line time and there is no charge for the
program. Those copying, sharing, and/or electronically transmitting
the program are required not to delete or modify the copyright notice
and restrictive notices from the program or documentation; anyone doing
so will be treated as a contributory copyright violator.
If you are passing this program on to others, uploading it to a
bulletin board system, or including it in a users group library, do not
separate the files contained in the distribution archive - pass the
entire archive on to the intended party. This ensures that those who
receive the program will have all the correct configuration utilities
and documentation necessary to get CATDISK up and running quickly. A
listing of what files you should have and the purpose of each is listed
later in this manual.
The CATDISK documentation may not be modified by users. The program may
not be separated from the documentation when distributed. Printed or
Photocopies ("Xeroxed") copies of the CATDISK documentation (i.e., this
manual) may not be distributed or sold without the written permission
of the author.
No other person other than the author, Rick Hillier, may accept payment
or royalties for this program.
This license to use CATDISK does NOT include the right to distribute or
sell CATDISK. Distribution terms are detailed on the next page.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 4
PUBLIC DOMAIN AND SHAREWARE LIBRARIES
Distributors of "public domain" or user-supported software libraries
must obtain written permission to distribute copies of CATDISK. No one
may use CATDISK as a promotion for any commercial venture or as an
enticement for the user to pay for any program, product, or service
unless they have received the express written permission of the
program's author.
In order to distribute CATDISK, a dealer or disk vendor must comply
with the following conditions:
(1) You must obtain written permission from Rick Hillier to
distribute CATDISK. Please use the vendor application supplied
near the end of this user manual. If you receive no reply,
write again: my silence does NOT constitute permission, and you
may not distribute "pending" receipt of permission.
(2) A maximum disk fee as set by Rick Hillier in the vendor
contract must not be exceeded. CATDISK may not be included
on any disk sold for more than this maximum. Major CD-ROM
or optical disk libraries are exempt from this restriction,
provided that they have the author's permission to distribute
CATDISK.
(3) Vendors may not modify or delete ANY files on the disk.
Vendors may add a "GO" program, and/or a reasonable number of
small text files designed to assist or provide a service to
the user, but these added files must be easily identifiable
and end-users must be allowed to delete the added files.
(4) Vendors must make a reasonable effort to distribute only the
most recent versions of CATDISK. All vendors who have
requested and received written permission to distribute
CATDISK will receive new MAJOR releases as they are issued.
(5) All disk vendors must comply with any and all vendor guidelines
vendor requirements set forth by the Association of Shareware
Professionals (ASP); for more information about ASP, contact its
chairman, Jim Button, at Buttonware in Seattle. Violation of
any ASP guideline or requirement automatically revokes
permission to distribute CATDISK.
Until formal requirements are adopted by the ASP, you must comply with
the following guidelines: Vendors must make an attempt to educate users
on the nature of Shareware. Catalogs, advertisements, order forms, and
all disks sold should contain ASP-approved or recommended wording
describing the nature of shareware, and should explicitly state that no
part of disk sale revenues are paid to the programs' authors. When
vendor catalogs or advertisements carry both Shareware and PD programs,
the Shareware programs must be differentiated from the public domain
programs in some way (in the description, with an asterisk, by listing
the registration fee, etc.).
ASP
CATDISK is a Shareware program conforming to standards as established
by the Association of Shareware Professionals (ASP) located at
325 118th Ave. S.E., Suite 200, Belleview, WA 98005.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 5
2. G E T T I N G S T A R T E D
WHAT YOU SHOULD HAVE RECEIVED
CATDISK is distributed in the form of a self-extracting executable file
created with Haruyasu Yokizaki's LHARC utility. This file should
contain eight files which are as follows:
CATDISK.EXE - The CATDISK program file.
CATLOOK.EXE - The CATDISK command line utility (lookup program).
CDISKCFG.EXE - The CATDISK configuration program.
* CATDISK.DOC - The manual you are now reading.
* CATDISK.HST - Revision history for CATDISK since its initial release
in October 1986.
README.1ST - Urgent program notes - IMPORTANT -- READ THIS FILE!
CDISKCVT.EXE - Conversion utility for converting old CATDISK files to
the newest format - See the README.1ST file before
running.
CLEANCAT.EXE - Cleanup utility for catalog entries containing volume
labels containing null characters - See the README.1ST
file before running.
* These two files are distributed in a self-extracting archive called
CATDOC.EXE. Simply run it to extract the two files. If you are
running on floppy disks, extract these files to a clean disk. See the
file README.1ST for further details.
SYSTEM REQUIREMENTS
. IBM PC/XT/AT or PS/2 or true compatible computer.
. DOS V2.00 or above.
. At least one floppy disk drive (Hard Drive Highly Recommended).
. 256K RAM - if more is available, CATDISK will have greater internal
capacity for reading new files off of the disks being
cataloged and will run more efficiently.
INITIAL NOTE ON ARCHIVE FILES
At various points in this user manual, references to ARCHIVE files are
made. This is a collective term describing a file that actually
contains more than one file. The contained files may or may not be
compressed. Currently, this refers to LBR, ARC, PAK, ZIP, LZH, LZS and
ZOO files.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 6
CONFIGURING CATDISK
Many features of CATDISK may be permanently set from the configuration
program, "CDISKCFG.EXE". When you start this program, please make sure
that the correct versions of the program files "CATDISK.EXE", and
"CATLOOK.EXE" are in the current drive and directory, otherwise you
will get an error message.
Upon startup, the configuration program will read the current settings
defined in "CATDISK.EXE", after which, the configuration screen will be
presented. You may change any given item on this screen by using the
<Cursor UP> and <Cursor DOWN> keys to highlight the title of the
desired field. The bottom portion of the screen will contain any
additional information as well as any instructions on how to change the
selected item.
A discussion of the 10 items on this list follows:
1) SCREEN UPDATE METHOD
You may choose between having your screen updated by using your
computer's built in BIOS routines, or by using a faster DIRECT
screen update method. Using the BIOS is much slower than using
direct access, but maintains compatibility with such operating
environments as TopView, Desqview, and DoubleDOS.
Choosing DIRECT screen access is much quicker, but will be
incompatible with most multitasking programs such as the above
mentioned due to the fact that they cannot handle "ill-behaved"
programs that write directly to the screen.
If you chose DIRECT screen access, a second test is made if you
have a GRAPHICS display connected in your system. Some video
adapters have the nasty side effect of producing static, or "snow"
when the video memory is accessed directly. This test will do
multiple direct access to the video ram on your graphics adapter.
When you hit a key to stop the test, you will be asked if you saw
static on the screen.
If you answer "Y" to the prompt, CATDISK will check for horizontal
retrace before writing to the display. This will result in a
slightly slower screen response than normal, but it is almost
negligible.
If you are not running under a multitasking system, or are using
DoubleDos in dual screen mode, I would recommend that you use
DIRECT screen access, as it's much quicker.
2) COLOR OR B & W
This option is self-explanatory. The appearance of the setup
screen will depend on the setting of this field.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 7
3) DISK CACHE SIZE
This field will enable you to set the DISK CACHE size. Setting it
to zero will disable the cache (i.e. turn the feature off).
Setting it to a number greater then zero will turn it on and will
enable CATDISK to keep the most recently read sectors of the
CATALOG FILES in memory, resulting in much faster scans through the
catalog file when looking for a group of files.
Some hard disks use their own device driver, and are incompatible
with this caching method. If this is the case, CATDISK will warn
you of this condition if caching is enabled, but is incompatible
with your hard disk. Under these circumstances, the caching
feature will be turned off during that program run... use this
configuration option to permanently disable the cache and eliminate
the warning at each startup.
If you already have a resident disk cache loaded in your system, DO
NOT USE CATDISK'S BUILT IN CACHE!!! The two systems will conflict
with each other and will probably cause damage to your catalog
files.
4) NUMBER OF LINES PER PAGE
The number of lines per page field will enable you to tell CATDISK
the number of lines of data (EXCLUDING headings) that it should
place on each page of printer or disk output. This may be any
number between 0 and 255. Entering zero will disable page breaking
and the output will be presented in a continuous stream with one
title at the top.
5) PRINTER STARTUP STRING
The printer start up string is a series of ASCII codes (entered
here as their Ascii VALUES) that will tailor your reports to the
format you desire. For example, I use an Epson printer and like to
set it to 1/8" spacing and get 80 report lines per page. To do
this, I send a startup string of "<Esc> <0>" to set this print
mode. To enter this string in the configuration program, I would
enter it as "027 048" without the quotes. The numbers are simply
the ASCII values of the characters I wish to send. If you have a
setup string entered here and wish to clear it, simply hit <Return>
in response to the prompt in the bottom area of the screen.
6) PRINTER FINISHING STRING
The printer finishing string is commonly used to reverse the
startup string entered above and is entered in exactly the same
way. In the example above, I would use "<Esc> <2>", which would be
entered as "027 050" without the quotes. If you have a setup
string entered here and wish to clear it, simple hit <Return> in
response to the prompt in the bottom area of the screen.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 8
7) DEFAULT ARCHIVE EXTRACT STATE
This will control the way CATDISK handles any ARCHIVE files that
it might encounter when cataloging your disks.
If you set it to OFF, CATDISK will NOT extract any archive files
that it finds on your disks.
If you set it to ON, CATDISK will expand EVERY ARCHIVE file that it
finds on your disks.
If you set it to QUERY, CATDISK will ask you for permission to
expand an ARCHIVE file each time it encounters one.
This can be changed temporarily while running CATDISK.
8) DEFAULT CATALOG DRIVE
The default catalog drive is the drive that CATDISK will assume you
wish to use for labeling disks and reading them for cataloging
purposes. This drive may still be changed at startup time (see
STARTING CATDISK), or from the menu when catdisk is running.
If you are running on single floppy based system, I would recommend
that you set this drive to the same drive ID that CATDISK will be
run from. CATDISK will prompt you to enter the appropriate disks
at the appropriate time, and will eliminate potential problems with
the disk caching feature if enabled (See the file README.1ST).
9) CATALOG FILE DIRECTORY
The catalog file directory is the location in your system that
CATDISK will look for and create its catalog files. This path may
contain a drive designator, so that the catalog files may reside on
a different drive than CATDISK itself, such as a ramdisk (in this
case don't forget to copy the files to a real disk before you turn
off or reboot your machine).
If this field is blank, the default drive and directory will be
used.
10) DISKS/FILES PER CATALOG
The maximum number of disks and files per catalog is simply that.
When CATDISK starts, it allocates its work space according to this
setting. There are currently four possible settings; which one you
pick is largely dependent upon the environment in which CATDISK is
to be run.
These settings are: DISKS # FILES
2000 32767 (32K)
1500 24576 (24K)
1000 16384 (16K)
500 8192 ( 8K)
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 9
COLOR CUSTOMIZATION
If you are running on a color monitor and have the color setting in the
main configuration set to COLOR, you may set your own screen colors if
you happen to dislike the color scheme that comes with CATDISK. To do
so, simply hit <F9> from the configuration screen and follow the menus.
Once you have selected this option, you will see a menu that will allow
you to select some general colors such as screen background and border
color (CGA type displays only - EGA and VGA have no effect), as well as
an option to reset the author's (that's me!) colors should you really
make a mess of the color scheme and wish to start over.
The other options will bring up menus that pertain to the various
screens that you might encounter in your usage of CATDISK. When you
reach these, there will be an option available for each item that will
change its foreground or background color. Selecting an option will
step you through the possible color range for that particular item.
Sound confusing? Try it for yourself... it's really quite easy. For
starters, try setting everything to green on cyan <grin> (if you don't
have a strong stomach, don't bother).
Once you have set all the fields to your desired settings, you may
instruct CDISKCFG to save the current settings by pressing <F10>.
CATDISK will save the appropriate information in the CATDISK.EXE and
CATLOOK.EXE program files and return to DOS.
If you do not wish to save the changes you made, simply hit <Esc>, and
you will be returned to DOS, while the previous configuration will
remain unscathed.
CATDISK is shipped with the following default settings:
1) Screen Update Method: BIOS
2) Color or B & W: B & W
3) Disk Caching: 0 K (Disabled)
4) Output Lines Per Page: 58
5) Printer Startup String: Nothing
6) Printer Finishing String: Nothing
7) Default ARCHIVE Extract State: ON
8) Catalog Drive: A:
9) Catalog File Directory: Default Drive and Directory
10) Maximum Disks/Files per Catalog: 1000/16384
11) Color Scheme: Authors Colors
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 10
UPGRADING FROM V3.61 OR LATER
Before copying the new program files to your work disk, you might want
to rename the executable file from the previous installation
(CATDISK.COM or CATDISK.EXE) to another name. The configuration
utility, CDISKCFG.EXE has the ability to read the configuration
information from the release that you were using for easy installation
into this release. This can save you some time in setting the program
up for your preferences, particularly if you've customized all the
screen colors.
Example - Upgrading from V3.71 to this release:
Procedure:
1) Rename your old CATDISK.EXE to CAT371.EXE (this file holds the
configuration information from the last installation.
2) Run the configuration utility, CDISKCFG.EXE.
3) Hit <F8>. CDISKCFG will ask you for the file name of the old
program file. Answer "CAT371.EXE" (without the quotes). CDISKCFG
will search the given file for the appropriate configuration
information. If successful, this information will be reflected in
the configuration options as displayed on the screen. If you've
selected the wrong file, you will get an error message, and the old
settings will remain intact on the screen.
4) If successful, press <F10>, and the settings will be saved in the
current CATDISK release.
5) Delete CAT371.EXE - it's no longer needed.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 11
GENERAL CONSIDERATIONS WHEN CONFIGURING CATDISK
When setting CATDISK up, there are a few things you should consider:
If you have a hard disk, you should use it for maintaining your catalog
files (i.e. set your catalog file directory to somewhere on your hard
drive).
If possible, set your video update method to DIRECT. CATDISK runs
faster in this mode.
If you are using a hard drive or a ram disk to hold your catalog files,
you should NOT use CATDISK's caching feature. The cache built into
CATDISK is meant to aid those with floppy disk based systems when doing
multiple searches through the catalog file. Using the cache while
updating a catalog files imposes additional overhead on the operation.
It is negligible on floppy based systems, as the bottleneck in the
operation is the disk itself - on hard drives, it is noticeable. If
possible, using one of the commercially available disk caching systems
is recommended, as they incorporate features into their programs such
as being able to use extended and expanded memory and the like that are
not feasible to include in CATDISK.
When setting your printer up for printing reports, try to set the
printer startup string such that the complete catalog listing (i.e.
files, stats and comments) can be printed.
The best setting for the default ARCHIVE extract state is QUERY. Many
archives do not need to be fully extracted as the name of the archive
filename itself is all that is necessary in order to identify what is
on that particular disk. By using some discretion in deciding which
archive files need be extracted, you can dramatically reduce the size
of your catalog files (as well as the time needed to update and search
them). Some however, need to be extracted (for example, MISC.ARC).
This setting gives you the best of both worlds.
When setting the default drive and directory for your catalog files, be
sure and include it in your DOS PATH as well. Although this is not
necessary, it will enable you to run CATDISK from anywhere in your
system without having to change to that directory before running
CATDISK. Setting the PATH for this is only beneficial to those using
hard drives.
When setting the maximum number of disks and files that can be
maintained in a catalog file, the best setting should be the LOWEST one
that will contain your largest catalog file. This will maximize the
amount of free memory left over that CATDISK can use to store file
information being read from disks being cataloged, sorting information,
caching information, and the like.
Keep in mind that, if you should have a catalog file grow to your set
maximum, you can always re-configure CATDISK (memory permitting, of
course) to accommodate a larger configuration, unless you are already
at the highest setting. When you next run CATDISK after making these
changes, your catalog file will then be able to grow to the new
setting.
If you are running on floppy drives, use the 8K setting for disks/files
per catalog. Your files will never exceed this limitation.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 12
SAMPLE CONFIGURATIONS
Scenario: One Hard Disk (C:) and a floppy drive:
Make a directory "C:\CATDISK" and copy the files CATDISK.EXE
and CDISKCFG.EXE to it. Set the configuration to:
1) Screen Update Method: <your option>
2) Color or B & W: <your option>
3) Disk Caching: 0 K (Disabled)
4) Output Lines Per Page: <your option>
5) Printer Startup String: <your option>
6) Printer Finishing String: <your option>
7) Default ARCHIVE Extract State: <your option>
8) Catalog Drive: A:
9) Catalog File Directory: C:\CATDISK
10) Maximum Disks/Files per Catalog: <your option>
11) Color Scheme: <your option>
Add C:\CATDISK to the DOS PATH and you will be able to call
up CATDISK or CATLOOK from anywhere in your system.
Scenario: Two floppy drives:
Take a blank disk and copy the files CATDISK.EXE and
CDISKCFG.EXE to it. This will be your CATDISK program disk.
Set the configuration to:
1) Screen Update Method: <your option>
2) Color or B & W: <your option>
3) Disk Caching: <your option>
4) Output Lines Per Page: <your option>
5) Printer Startup String: <your option>
6) Printer Finishing String: <your option>
7) Default ARCHIVE Extract State: <your option>
8) Catalog Drive: A:
9) Catalog File Directory: B:\
10) Maximum Disks/Files per Catalog: 500/8192
11) Color Scheme: <your option>
When starting CATDISK for the first time, insert the
program disk in drive A: and take a blank formatted disk and
insert it in drive B:. This will be your data disk. When
CATDISK has loaded and has displayed the title screen, you
may remove the CATDISK program disk from the A: drive. This
will now be the drive from which disks being cataloged will
be read.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 13
Scenario: One floppy drive:
Take a blank disk and copy the files CATDISK.EXE and
CDISKCFG.EXE to it. This will be your CATDISK program disk.
Set the configuration to:
1) Screen Update Method: <your option>
2) Color or B & W: <your option>
3) Disk Caching: <your option>
4) Output Lines Per Page: <your option>
5) Printer Startup String: <your option>
6) Printer Finishing String: <your option>
7) Default ARCHIVE Extract State: <your option>
8) Catalog Drive: A:
9) Catalog File Directory: A:\
10) Maximum Disks/Files per Catalog: 500/8192
11) Color Scheme: <your option>
When starting CATDISK for the first time, insert the
program disk in drive A: and start CATDISK. You will need to
add the command line option /IP (initial pause - see later
in this manual).
Once CATDISK has loaded, it will pause and ask you to insert
your data disk. If this is the first time you are running
CATDISK, use a blank formatted disk.
When you catalog a disk, you must first remove the data disk
and insert the disk to be cataloged BEFORE activating the
catalog function. When CATDISK is done reading the disk, it
will ask you to re-insert the data disk.
IMPORTANT NOTE
If you are running CATDISK on a single drive system, I would recommend
the above configuration for two reasons, even though DOS can make the
one drive act like A: and B:.
1) Perhaps the most important reason; if you've activated the disk
caching feature, is that failure to do so may cause a loss of data
on disks other than your data disk, particularly when you label a
disk. The reason being that the cache built into CATDISK references
the PHYSICAL hardware, not the logical drive that DOS creates (i.e.
A: and B: use the SAME piece of equipment).
By setting CATDISK to the above configuration, it will be aware that
the above situation exists and take the correct action when carrying
out critical functions.
2) This will allow CATDISK to prompt you for the appropriate disks,
thus avoiding the DOS prompt "Insert disk for drive B:" and the
like.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 14
STARTING CATDISK
CATDISK is started from the DOS command line by issuing the following:
CATDISK parameters
- where parameters may include any of the following:
/NP - Specifying this command line option will cause
CATDISK to eliminate the pause after cataloging/
un-cataloging a disk. It will also eliminate the
"Insert a disk in drive X:" prompt unless it is
absolutely necessary.
/NW - Under normal circumstances, when you catalog a
disk containing a Volume ID that already exists
in the current catalog, CATDISK will issue a
warning to that effect, and will ask you for
verification before proceeding to catalog that disk
The reason behind this is that there is always the
possibility of two different disks having the same
Volume ID. Cataloging one would mean that the files
from the other would be un-cataloged in the same
process.
If you specify the /NW option on the command line,
this warning will be suppressed, and the disk will
be cataloged without further delay.
This option will also disable CATDISK's warning
before creating any new catalog files when the
current catalog file is changed via CATDISK's menus
to a catalog set that does not exist.
/NS - Suppress status indicators during processing. This
speeds up processing time. Status indicators are
there simply to indicate that the computer is
actually doing something useful. Try it either way
and set it to your liking.
/AC - Turn the auto comment feature ON at startup.
Normally, CATDISK, upon completion of cataloging a
group of files from a disk will immediately
return to the menu. Activating this feature from
the command line (or from the menu) will cause
CATDISK to proceed to the section where you may
add/modify the file comments for the volume that
you just cataloged.
/SD - CATDISK can display screen information for your
catalog in two different formats. The default is
to show the Filename, Volume ID, Arc ID, size,
date, time and attributes for each record. There
is a second display format that omits the file
attributes, but shows the sub-directory that the
file occupies on its disk. Setting this option
will make the second format the starting report
type.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 15
/Ffilename - The default filename that CATDISK uses is "CATDISK"
which may be overridden with this parameter.
Note that there is no space between the /F and the
filename.
If you specify /F? on the command line, CATDISK will
bring up a point and shoot selection menu of all of
the catalogs it detected in your catalog file
directory. If none are found, an error message will
be displayed and you will be returned to DOS.
Hitting the <Esc> key from within this list will also
cause you to be returned immediately to DOS.
/CO - similar to above, but the third display format that
shows file comments will be the default.
- *** NOTE: If you specify both /SD and /CO at startup, the LAST one
that you specified on the command line will take effect.
/Rx - this will allow you to set the initial location that
CATDISK will send a report. This location can
still be changed from within the settings and toggles
menu. x can be any of the following:
1 - Screen 2 - LPT1 3 - LPT2 4 - Disk File
5 - ASK ME (Prompt for location before each report)
/Px - Set printer output format to report type x, where x
is in the range (0-2).
x Value Report Type
------- -----------
0 Show regular file statistics
1 Show file comments
2 Show file statistics and comments
(selecting this report style assumes that
your printer is set to produce 132 column
reports)
/D: - Catalog files from drive D: where D: is one of
[A - {last drive in your system}].
/IP - Initial Pause. This parameter will cause CATDISK
to pause after it is loaded so that you may remove
the program disk (not needed during the session) and
insert the data disk. This option is only needed if
you are running on a single drive system.
/ALIAS - Adding this option to the command line will activate
the "ALIAS" feature whereby you will be able to
override the name under which a disk will be
cataloged. Normally, CATDISK will catalog a disk
under the volume label. This will enable you to
optionally catalog the disk under a different name
without changing the volume label on the disk being
cataloged.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 16
/NZ - Normally, when not instructed to read the directory
contents of ZIP files, CATDISK will attempt to read
in the main comment from any ZIP file that it
encounters. Adding this option to the command line
will allow you to turn this feature off at startup.
/NZC - normally, at startup, CATDISK will enable a feature
whereby any ZIP files containing a main comment that
get expanded will have that main comment inserted
into the comment area of any file entry extracted
from that ZIP file that does not already have a
comment. By adding this option to the command line,
this feature will be turned off at program startup.
The slash "/" may be substituted by either a dash "-" or a space " ".
Examples: CATDISK /FGAMES/NS/AC/CO/P2/ALIAS/B: or CATDISK A:
- entering CATDISK ? will bring up a help message indicating the above.
NOTE: You may also put the command line options in a DOS environment
string using the DOS "SET" command. This command (see examples below),
may be placed in your AUTOEXEC.BAT file so that you will not need to
remember which command line options to use to obtain your favorite
setup, or for that matter, to type them!
- example: SET CATDISK=/FGAMES/NS/AC/CO/P2/ALIAS/B:
When you start CATDISK under these circumstances, simply type "CATDISK"
<Enter> and the above options will automatically be invoked.
Any options entered on the command line will be added to those
specified in the CATDISK environment variable. This makes it possible
to have a base set of options set in the DOS environment and have an
optional set that you can specify at the time you run CATDISK.
It is also possible to override some of the options as well (for
example, the printed report format, the screen report format, the
catalog file, and the catalog drive), as CATDISK will pay attention to
the last option of a given type.
For example, using the above environment example, entering the command
CATDISK /A:/P1
will cause CATDISK to set the catalog drive to A: (overrides the B:
option), and the printer report format to show comments (format #1)
instead of statistics and comments (format #2).
Once CATDISK has been successfully started, a title screen will appear.
Hit any key to ascend to the main menu.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 17
3. U S I N G C A T D I S K
USING THE MENUS
The major options available from CATDISK such as the main functions
that you see in the opening menu after the title page disappears can be
selected in two different ways.
The first, and easiest is just to hit the indicated key beside the
desired option.
In response to a requests from registered users, I have also
implemented a "point and shoot" method of selecting items from a menu.
Simply use the cursor keys to position the flashing arrows in the
inverse box that indicates the keystroke required to activate the
desired option and hit <Return> (or <CR> to you C programmers). This
will carry out the same function as if you had struck the key in the
inverse box.
One advantage that the second approach has to the first is that those
of you who do not touch type numbers very well (or have a tendency to
hit the key beside the one you are after) have another avenue to use to
navigate through the menus of CATDISK.
Another is that once you have activated a function such as cataloging a
disk, you need only type <Return> to re-activate that function as
CATDISK will remember the last option you activated (quite handy if you
are cataloging multiple disks, as the <Return> key is larger than
most... you aren't as apt to miss it).
A special note about the options available in the Settings And Toggles
Menu is applicable here. Normally, to change one or more of the
settings available in this menu, you would have to select option #2
from the main menu and then select the appropriate option number in the
settings and toggles menu to change the desired feature. Although this
method of control is intuitive enough, there is a shortcut to these
option when you are in the main menu.
To change a setting directly from the main menu, simply hold down the
<Alt> key and press the number key (from the top row only, not the
numeric keypad) that you would normally hit if you were in the settings
and toggles menu. CATDISK will act on that keystroke as if you had
selected that option directly from the appropriate menu. If the
toggled information you changed is not on the top of the screen, the
status line will display above the menu title for a second or so before
disappearing.
You will probably find this method of changing settings preferable to
the first method offered as you become more familiar with CATDISK and
its operation.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 18
SCREEN REPORT OPTIONS AVAILABLE
When viewing a report on your screen, there will be several options
available to you. The following are available in ALL screen based
reports:
<Cursor UP> - move up one line in the report. The screen contents
will scroll down to make room for the new line
appearing at the top.
<Cursor DOWN> - move down one line in the report. The screen
contents will scroll up to make room for the new line
appearing at the bottom.
<PgUp> - move up one page (15 lines) in the report.
<PgDn> - move down one page (15 lines) in the report.
<Home> - move to the beginning of the report.
<End> - move to the end of the report.
<Grey Plus> - move down through the report 1/15th of the total
length of the report (see the appendix regarding the
SCROLL BAR later in this manual).
<Grey Minus> - move up through the report 1/15th of the total length
of the report (see the appendix regarding the SCROLL
BAR later in this manual).
<Esc> - return to the menu.
These options are available in all reports _except_ the SUMMARY REPORT:
<N> - change report format to show a standard (normal) file report.
This is the default if you do not specify either /SD or /CO
when you start CATDISK.
<S> - change report format to show sub-directories. If a
sub-directory begins with a tilde (~), that means that the
sub-directory shown is a sub-directory past the first level
(i.e. a sub-directory within a sub-directory). If you wish to
have this report format come up by default when starting
CATDISK, simply add /SD to your command line with which you
invoke CATDISK.
<C> - change the report format to any comments you might have entered
for the shown catalog entries. If you wish this display format
to appear by default, use the /CO option when starting CATDISK.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 19
SELECTING A VOLUME NAME FROM A LIST
Other than actually labeling a disk, there are three other locations in
CATDISK where you will be prompted for a volume label: un-cataloging a
disk; generating a report by volume id; and adding file comments by
volume. If you know what volume label is desired at the prompt, you
may enter it verbatim. Leaving it blank, however, will cause CATDISK
to come up with a point-and-shoot list of all the volume names in the
current catalog file. When this list first appears, you will notice
that the first volume is highlighted. Selecting a volume from this
list is merely a matter of moving the highlight bar to the desired
volume and pressing <Enter>.
The following options are available:
<Cursor UP> - move up one line in the list. If you are already at
the top of a column, the highlight bar will move to
the bottom of the previous column if available.
<Cursor DOWN> - move down one line in the list. If you are already
at the bottom of a column, the highlight bar will
move to the top of the next column if available.
<PgUp> - move back 96 lines in the list.
<PgDn> - move ahead 96 lines in the list.
<Home> - move to the beginning of the list.
<End> - move to the end of the list.
<Grey Plus> - move forward in the list 1/15th of the total length
of the list (see the appendix regarding the SCROLL
BAR later in this manual).
<Grey Minus> - move back in the list 1/15th of the total length of
the list (see the appendix regarding the SCROLL BAR
later in this manual).
<Enter> - Select the highlighted volume for the prompt from the
previous screen.
<Esc> - return to the menu with no further action taken.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 20
OPTION 1 - SET DRIVE FOR CATALOGING
This function allow you to set the drive from which the files to be
cataloged will be read. Simply select letter from (A - x) to select
the drive with that DOS letter designation, where x is the last drive
that CATDISK detected in your system configuration. The change will be
noted immediately in the status area at the top of the screen.
*** NOTE: If you are running with one floppy drive only and have
turned the caching option on from the configuration utility,
do not set this option to a drive other than the one on
which the catalog files reside (probably A:). Failure to do
so could cause loss of data on your disks.
See the SAMPLE CONFIGURATIONS section covered earlier in
this section. You have been warned!
Users with a hard-disk, single floppy configuration, who are running
CATDISK from the hard disk will NOT experience this problem and may
proceed as normal. It's ONLY if the same PHYSICAL drive is being used
for the CATDISK work files AND the disk to be cataloged that the
above precautions must be taken.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 21
OPTION 2: SETTINGS AND TOGGLES MENU
The options available in this sub-menu will allow you to control the
behavior of some of the features of CATDISK. You can get to this menu
by selecting option #2 from the main menu.
The options available on this menu are:
Sub-option 1 - Pauses On/Off
----------------------------
Under normal circumstances, CATDISK will pause at strategic places,
either to allow you to view what has just happened (cataloging and
un-cataloging), or to prompt you to insert a disk in drive X:
(labeling or reading directories, etc). If you turn this toggle off,
CATDISK will only prompt you for a disk when absolutely necessary. In
addition, there will be no pause at the end of a catalog update; you
will immediately be returned to the main menu, or to the comment entry
screen if you have the AUTO COMMENT feature turned on.
Sub-option 2 - Set Current Catalog File
----------------------------------------
Although the catalog filename may be set upon starting up CATDISK, is
may also be convenient to be able to change the current file from
within a CATDISK session. Select option #3 from the main menu, and you
will be prompted for a new catalog file to use. Any valid DOS filename
will do. Be sure to specify the NAME portion only; do not include the
file extension portion. If the name you specify is valid, it will then
be used for all subsequent catalog updates and queries (This is
reflected at the top of the screen). If not, an error message will be
issued and no change will be made to the current catalog file name.
If the catalog file set that you specify does not exist, CATDISK will
automatically create a new catalog for you. Before doing so, however,
CATDISK will indicate that the summary or catalog file does not exist
and request your permission to create it before proceeding. If you
specified /NW on the command line, this warning will not appear -
CATDISK will simply proceed to create any necessary files for the
specified catalog set.
If you don't enter anything for the catalog filename, a list of all
current catalog files in the catalog directory will be displayed on the
screen. If the desired catalog is on a removable disk (i.e. floppy
disks or removable hard drives), be sure and have that disk in the
appropriate drive BEFORE you enter nothing to the prompt so the desired
files will appear in the list. This method can be handy when you are
not sure of exactly what you called a particular catalog file.
To select a file from the list, simply move the highlight bar around
the list of filenames with the cursor keys so that it rests on the
desired catalog file. At this point, hit the <Enter> key, and that
file will be selected as if you had typed it at the prompt. Hitting
<Esc> in this screen will abort the operation as if you had pressed
<Esc> at the prompt.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 22
If you are switching to a catalog that already exists, and it will not
fit into the configuration you defined in the configuration program
(maximum disks/files per catalog), you will get an error message and
the catalog file setting will be left unchanged.
Sub-option 3 - Change Printer Report Type
-----------------------------------------
CATDISK currently supports three printer report styles, which are
detailed here. The particular report style that you desire may be set
with this toggle, and will be reflected in the toggles portion of the
menu screen.
STATISTICS: This is the default report style (unless overridden on the
command line), which is to show the path, filename, volume
id, ARCHIVE id, as well as the size, date, time and DOS
directory attributes of each file listed.
This report style corresponds to the command line option
/P0, and will fit on an 80 column printer.
COMMENTS: This report style will substitute file comments for the
size, date, time, and DOS directory attribute.
This report style corresponds to the command line option
/P1, and will fit on an 80 column printer.
BOTH: This report style will show all of the fields from the two
above reports. Please note that it assumes that you
either have a 132 column printer, or an 80 column printer
set to compressed mode. It corresponds to the command
line option /P2.
Sub-option 4 - File Comments On The Fly
---------------------------------------
If this toggle is turned OFF, CATDISK will proceed back to the main
menu upon completion of the process of cataloging a disk. If you wish
to add comments for some/all of the files that you have just
cataloged, you may turn this toggle ON. When this is the case,
CATDISK will catalog files in the normal manner, but upon completion,
you will be taken to another screen that will allow you to scroll
through the files you just cataloged and add/update the comments for
each file shown. See Option F1 - Add/Change File Comments for details
on how this section of the program works.
Sub-option 5 - Zip File Comment Copy
------------------------------------
If this feature is turned on, CATDISK will take special action when
expanding ZIP files. If a main ZIP file comment is found, any file
entries extracted that do not have comments will have the main ZIP file
comment entry inserted instead. The presence of a "Z" beside the Auto
Comments setting in the status information at the top of the screen
indicates that this feature is turned on.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 23
Sub-option 6 - Set Current Report Destination
----------------------------------------------
Selecting this option will affect the report destination and whether or
not CATDISK will ask you where the report should go. Each time you
select option 1, CATDISK will run through a sequence of five possible
locations (Screen, LPT1, LPT2, Disk, or ASK ME).
Selecting one of the first four will cause CATDISK to immediately
generate a report to the selected destination IMMEDIATELY upon
selecting it. You will not be prompted any further, unless you have
selected DISK, in which case, you will be asked for a filename in which
to place the report.
If you select ASK ME, CATDISK will prompt you for a report location
(one of the first four in the list) each time you ask it to generate a
report.
I usually leave this setting set to SCREEN as, most of the time, I
browse through my catalog files on the screen. You, however, may find
it handy to set this to ASK ME, especially if you jump to report
locations frequently. If this is the case, you may, if you haven't
already, add the command line option /ASK to your current list of
options. This will override the default location of SCREEN at startup,
negating the need to set it manually each time you start CATDISK.
Sub-option 7 - ARCHIVE Extract Setting
--------------------------------------
Although this setting is permanently set from the CDISKCFG utility, it
is can sometimes be convenient to be able to change it during a CATDISK
session. Selecting option 2 will run the Auto ARCHIVE Extract setting
through three possibilities, OFF, ON, or QUERY. The current setting is
shown near the top of the screen in the status area.
If this feature is turned OFF, any file searches through the catalog,
with the exception of OPTION #0 - Show All Files, will NOT show any
files that reside in an archive file. The archive file's presence will
still be shown in the listing.
If this feature is turned ON, CATDISK will extract the archive
directory of any archive it encounters in its search.
If it is set to QUERY, CATDISK will prompt you as to whether it should
extract the archive directory of any archive that it encounters in its
search before proceeding to do so. Reports generated will act as if
the feature is turned ON.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 24
Sub-option 8 - Comments When ZIPS Not Extracted
-----------------------------------------------
In the course of its normal operation, CATDISK, when not extracting the
directory information from ZIP files, will search each one it
encounters for the comment of the ZIP file itself. Under some
circumstances, such as those where your particular collection of ZIP
files do not contain comments, or where the vast majority of them
contain BBS advertisements (not really what they were intended for),
this search can be both time consuming and meaningless. This toggle
will turn this feature on or off. The presence of a "Z" beside the
Archive Extract setting in the status information at the top of the
screen indicates that this feature is turned on.
Sub-option 9 - Aliases On/Off
-----------------------------
Activating this option will enable you to override the name under which
a disk will be cataloged. Normally, CATDISK will catalog a disk under
the volume label. This will allow you to optionally catalog the disk
under a different name without changing the volume label on the disk
being cataloged. Keep in mind that if you re-catalog the disk at a
later time, you must remember the new name that you gave to the disk in
your catalog, otherwise, duplication will occur in your catalog.
Sub-option <Esc> - Return To Main Menu
--------------------------------------
Exactly what it says.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 25
OPTION 3: LABELING A DISK
Selection of option #3 on the main menu will allow the VOLUME LABEL of
a disk to be set or changed. Upon selection, CATDISK will attempt to
read the current label of the disk. If none is present, you will be
notified of this, and will be given the opportunity to create a volume
label for that disk. See the DOS manual on volume labels for more
information. If a label already exists on the disk, its name will be
shown as a reminder, and you will be given an opportunity to change the
label name. Just enter the new label name and hit <CR>.
If the label name was valid, the change will be made, otherwise, an
error message indicating such will be issued and you will return to the
main menu.
If you do not wish to enter or change the disk label, simply hit <ESC>
at the volume label prompt and you will immediately return to the main
menu with no changed made to the disk label.
When the volume label has been successfully changed or created, CATDISK
will check to see if the old label, if any was present, exists in the
current catalog file. If so, you will be given an opportunity to have
CATDISK automatically change the old volume id references to the newly
entered one. If the disk that you re-labeled is one that actually is
in the catalog, answer <Y>es to the prompt. CATDISK will take care of
the rest. This feature can be a great time saver, as it eliminates the
need to uncatalog the disk under the old volume id, and re-catalog it
under the new name.
If the disk is not in the catalog, answer <N>o to the prompt. Answering
<Y>es under these circumstances will not damage the catalog file, but
will cause confusion as to what disk the altered catalog records reside
on.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 26
OPTION 4: CATALOGING A DISK
This selection will initiate cataloging of the files on the selected
catalog disk as shown in the status area at the top of the screen. The
volume label will be read, and if it doesn't exist, you will be given
an opportunity to enter a volume label for the disk. If you hit <ESC>
at the label prompt, the operation will be aborted and you will be
returned to the main menu without cataloging your disk. After entering
the label name for that disk, you will be asked if you wish to write
that label to disk. If you answer <Y>es, the disk will be labeled and
cataloging will continue. If you answer <N>o, the label will not be
written, but the disk will be cataloged under the name that you gave
it. This will allow easy cataloging of write-protected disks.
Please note that volume labels created by Peter Norton's "Volabel"
utility may contain lower case characters. CATDISK will convert the
labels to upper case before adding them to the catalog. This will
enable you to manipulate and uncatalog any of these disks. The
physical volume label on the disk will be left unchanged.
There are volume label utilities on the market that allow the entry of
illegal characters into the volume label. CATDISK will change these
offending characters into spaces when it encounters them. This will
not affect the physical label on the disk, but rather the way CATDISK
stores them in its catalog files.
If the label on the disk to be cataloged already exists in the
catalog, you will be notified of this situation, and will be given an
opportunity to abort the operation. This feature has been added as a
safeguard against a situation where two disks of the same volume id may
be overriding each other and clobbering the catalog contents of the
other disk. If you specified the "/NW" option on at startup, this
warning will not be issued.
If you specified /ALIAS in your startup options, a screen will appear
showing you what the current volume label is on the disk you are about
to catalog. A prompt will appear below this asking you for a name
under which you would like the disk to be cataloged. The current
volume label will be displayed in this area, and you will be allowed to
change it before the cataloging process takes place. This can be very
handy in certain situations such as vendor disks that insist that the
volume label remain unchanged, as the software uses the volume label to
identify the disk. The volume label on the disk may not mean anything
to you, and using an alias may be desirable in this case.
As flexible as the ability to catalog under an alias can be, there are
a couple of drawbacks that should be considered before you decide to
make the name in the catalog different from the volume label on the
disk. Firstly, if you go to re-catalog the disk at a later time and
don't provide exactly the same alias that was used initially, you can
wind up with duplicate entries in the catalog file, as CATDISK
currently has no way of knowing that the disk has already been
cataloged. Secondly, if at a later date, you use option #3 in CATDISK
to change the volume label on a disk that has already been cataloged,
CATDISK will have no way of knowing that it should give you the
opportunity to change the entries in the catalog to reflect the new
volume label, as the entries are not cataloged under the old volume
label.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 27
The best advice would be that if you never intend to re-catalog a disk
in the future, then it would be ok to use an alias, otherwise, it's
best to stick with a meaningful volume label.
Once the name of the disk has been established for cataloging purposes,
the directory and any archive or library entries (if the ARCHIVE auto
extract feature option is turned on - it is by default) will be read
(if the ARCHIVE auto extract is set to QUERY, you will be asked for
verification before a given archive or Library will be read). This
process will be repeated for each sub-directory on the disk as well.
All existing levels of sub-directories will be searched.
If CATDISK encounters a ZIP, ZOO or DWC file, any comments that may be
stored in that file will be read and included in the catalog file. If
the operation is a re-cataloging operation and any extracted filenames
already exist in the catalog file with comments attached, the comment
from the archive file will be ignored.
ZIP files, in addition to supporting comment entries for each file
contained, can also have a main comment for the ZIP file itself. When
CATDISK reads ZIP files and finds a main comment, it will insert that
main comment in the catalog file for any entries in the ZIP file that
do not already have comments. This feature of copying the main ZIP
file comment can be turned on and off via the menus as desired.
Upon completion of this, the catalog summary file and master catalog
will be updated to reflect the current directory/directories of the
disk. If any files have been added, they will be added to the catalog;
if any files have been changed, they will be updated; if any files
have been deleted, they will be removed from the catalog.
If, while reading the disk, CATDISK cannot find any files there, it
will ask you if you would like to add that disk to the catalog anyway.
Why would you want to add such a disk to the catalog? The answer to
this question can best be explained by an example.
You're maintaining a collection of disks for a computer users group.
One day, you decide to clean up your collection, eliminating any
duplicates that may have crept into the collection. While you're
eliminating the duplicates, several of the disks in the sequence become
completely empty. In this case, it is desirable to have the disk
showing in the summary file as having its capacity completely available
to accept new files. Additionally, all the files that were eliminated
from that disk will be un-cataloged by CATDISK through its normal
function. If the disk has never been cataloged before, this method
represents a way to "pre-allocate" the disks to the collection and
initialize their entries in the catalog file.
If you would like to have the blank disk included in the catalog,
answer YES to the prompt, otherwise, answer NO. If you elect not to
include the disk in the catalog file, and it has already been cataloged
before, it would be advisable to remove that volume listing from the
catalog file using option #5.
Keep in mind, that deletion of an ARCHIVE file will cause any files
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 28
existing within that ARCHIVE file to be uncataloged. Also, turning the
Auto ARCHIVE Extraction feature OFF, or answering <No> to a Extract
ARCHIVE prompt to a cataloged ARCHIVE will cause any files in an
ARCHIVE file on that disk to be uncataloged as well.
Should the disk become full when the cataloging process is underway,
the process will be aborted with an error message. The old catalog
file will remain intact (i.e. no changes made), but the summary file
will reflect either the presence of the new disk, or the current status
of that disk if it already existed in the catalog. This means that the
catalog file will not be accurate as to what's on the disk that you
attempted to catalog. If this error is encountered, you should either
try to free up some space on disk on which the catalog file exists, or
move the .DTA and .SUM files to another disk (see CONFIGURING CATDISK
for details on how to access catalog files on other drives and
directories) and retry the operation.
This operation is completely automatic and does not require any further
input from the operator once started, unless, of course, the ARCHIVE
extract state is set to QUERY.
If you have turned on the auto-comment feature either from the
command line or from the toggles menu, you will be taken to a section
of the program that will allow you to add/update file comments.
See "<F1> - Adding/Updating File Comments" later in this manual for
details.
Please keep in mind that CATDISK has an internal limitation of being
able to read in only the first 5000 files of the disk being cataloged.
OPTION 5: UNCATALOGING A DISK
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 29
There may be times when you will wish to remove a disk's files from the
catalog. Select option #5 from the main menu, and you will be asked to
enter the VOLUME NAME of the disk to be uncataloged. Enter it and hit
<Enter>. If the volume label doesn't exist in the catalog, then you
will be notified and returned to the main menu.
Optionally, you can leave the volume ID blank at the prompt. CATDISK
will bring up a point-and-shoot menu from which you can select a volume
id from those in your current catalog. See the section entitled
"Selecting A Volume Name From A List" previously discussed in this user
manual.
If the volume label is found in the catalog, its entry will be deleted
along with all the file names under it.
If you do not wish to carry out this operation, hit <Esc> at the volume
label prompt and no action will be taken.
Should the disk become full during the catalog update process, the
process will be aborted with an error message, and the old catalog file
will remain intact. Typically, this error should not occur, unless you
have added more files to the disk, or another program has used up more
disk space (such as a database expanding a file). Should this error
occur, the summary file will no longer contain a reference to the
diskette that was uncataloged, but the catalog file will still contain
references to that diskette.
Should this be the case, you should either free up some space on the
disk, or copy the .SUM and .DTA files to another disk (see CONFIGURING
CATDISK for details on accessing catalog files on other drives and
directories), catalog the diskette in question, and uncatalog it again.
This will remove any references to that disk from the catalog file.
If you do not have access to that disk any more (you may have erased
it), simply take a blank diskette, add one file to it, and label it the
same as the diskette you wish to uncatalog. Carry out the above
procedure, and you will obtain the same results.
In practice, this should not happen, as you would have needed
sufficient disk space to create the catalog file in the first place.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 30
OPTION 6: SHOW DISK SUMMARY
Selection of option #6 from the main menu will cause CATDISK to display
an alphabetical list of VOLUME NAMES and some pertinent statistical
information for each. This option is handy if, say, you have a bunch
of utility disks and want to add a 14K utility program to one of them.
This report can be quite useful in making efficient use of existing
working diskettes.
All the statistical items shown should be self-explanatory, except one;
that is, the Slack % factor. The disks on which DOS stores it files
are divided into allocation units called clusters. The size of each
cluster varies with the type and size of disk. When DOS allocates
space on a disk for a file, it is allotted in one cluster units to the
file. Some common cluster sizes are 512 bytes on 160-180K diskettes,
and 1024 bytes on 320-360K diskettes. Some hard disks have larger
cluster sizes.
Anyway, let's say, for example, that you have a file of 256 bytes. On
a 360K diskette, DOS will allocate 1024 bytes to the file, even though
it is only 256 bytes long. This means that three-quarters of that
cluster is unused, or that you have 75% slack for that file. The
figure that you see on the summary report is the overall slack
percentage of all the files on the disk.
Depending on where you have set your output destination, the following
options are applicable:
Printer: A hardcopy summary report will be printed on your printer.
The disk volume names will be echoed to the screen as they
are sent to the printer. Hitting <Esc> at any time during
report generation will abort it and return to the main menu.
Disk: A listing in the same format as the hardcopy summary report
will be produced in a diskette file. The default name for
this file is one with the same name as the current catalog
filename with an extension of ".LST". This may be overridden
at the time that the report is generated. Hitting <Esc> at
any time during the generation of the report will abort it
and return to the main menu.
Screen: This will allow you to browse through your summary report on
the screen. For a list of options available, please see the
section entitled "SCREEN REPORT OPTIONS AVAILABLE" in this
manual.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 31
OPTION 7: SHOW FILES FOR A VOLUME
Selecting option #7 will cause CATDISK to display an alphabetical list
of files for a particular disk. If you have the report destination set
to "ASK ME", you will be asked for a report location. After the report
destination is established, you will be asked for a volume ID. Simply
enter it and hit <Return>, or hit <Esc> to return to the menu without
producing a report.
Once the report location has been determined, CATDISK will ask you for
the volume name to match for the report. You can either enter the
exact volume name to match, or a wild-card entry to match for the
report. If you enter an exact entry, CATDISK will first find it in the
summary file. If it does not exist, you will be notified, and the
catalog scan will not even take place. If you want to obtain a report
for a group of volumes, here's how the wildcard matching works:
As CATDISK scans your catalog for matches, it does a character by
character comparison of the pattern that you specified and the volume
name for each entry in your catalog. As soon as a mismatch occurs, the
catalog entry is not included in the report. Two characters have a
special meaning in these comparisons. The question mark (?) will match
any character in the position which the question mark occupies. The
asterisk (*) will match any characters to either the end of the volume
name, or the next non-asterisk character in the pattern, if there are
any. As a result of this logic, any characters between two asterisks
that may occur in the search pattern are ignored.
One special case with the asterisk feature is when a pattern is placed
in between two asterisks. CATDISK will then match any volume that
contains the pattern anywhere in the name.
To better illustrate, here are some examples:
Pattern Volume ID Match?
----------- ----------- ------
VOLUME 1 VOLUME 1 YES
VOLUME 1 VOLUME 2 NO - not an exact match
VOL????? VOLUME 1 YES - any 8 char name beginning with "VOL"
VOL????2 VOLUME 2 YES - any 8 char name beginning with "VOL"
that ends with "2"
VOL*1 VOLUME 1 YES - any name beginning with "VOL" and
ending in "1" (any number of chars)
VOL*1 VOLUME 2 NO - doesn't end in "1"
*1 VOLUME 1 YES - any name ending in "1" (any number of
chars)
*1 VOLUME 2 NO - doesn't end in "1"
???????? VOLUME 1 YES - any 8 char volume name
????????? VOLUME 2 NO - volume ID is not 9 characters long
* ANYVOLUME YES - any volume ID, any number of chars
AB*CD*EF ABEF YES - "CD" in the middle ignored
*MISC* CATMISC1 YES - Contains "MISC" in the volume name.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 32
Note that in the last example, the presence of a leading and trailing
asterisk will cause CATDISK to search for the characters enclosed
between them as they appear literally. Wildcard characters must not
appear between these delimiters, as they cannot exist in a valid DOS
filename (i.e. the volume id) and therefore will not be matched. For
example," *DI?K*" will cause CATDISK to search for "DI?K" in the volume
id. The question mark is not a valid character in a DOS filename,
therefore no matches will be found.
Optionally, you can leave the volume ID blank. CATDISK will bring up a
point-and-shoot menu from which you can select a volume id from those
in your current catalog. See the section entitled "Selecting A Volume
Name From A List" previously discussed in this user manual.
Depending on where you have set your output destination, the following
options are applicable:
Printer: A hardcopy file report will be printed on your printer. The
filenames will be echoed to the screen as they are sent to
the printer. Hitting <Esc> at any time during report
generation will abort it and return to the main menu.
Disk: A listing in the same format as the hardcopy file report will
be produced in a diskette file. The default name for this
file is one with the same name as the current catalog
filename with an extension of ".LST". This may be overridden
at the time that the report is generated. Hitting <Esc> at
any time during the generation of the report will abort it
and return to the main menu.
Screen: Upon entering the search spec, scanning of the catalog will
commence. If you have status indicators turned on, a counter
will increment each time a matching file is found. If at the
and of the search, no files were found, an error message will
be issued and you will be returned to the main menu.
When the search has completed successfully, the file names
will be shown alphabetically, along with the volume name,
archive name, and other directory information for that file.
For a list of options available, please see the section
entitled "SCREEN REPORT OPTIONS AVAILABLE" in this manual.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 33
OPTION 8: SHOW FILES FOR AN ARCHIVE
Selecting option #8 will cause CATDISK to display an alphabetical list
of files for a particular archive. If you have the report destination
set to "ASK ME", you will be asked for a report location. After the
report destination is established, you will be asked for a Archive to
list. Simply enter it and hit <Return>, or hit <Esc> to return to the
menu without producing a report. If you wish to obtain a report for a
group of similarly named archives, you may use wildcards in your search
spec. Here's how they work:
As CATDISK scans your catalog for matches, it does a character by
character comparison of the pattern that you specified and the volume
name for each entry in your catalog. As soon as a mismatch occurs, the
catalog entry is not included in the report. Two characters have a
special meaning in these comparisons. The question mark (?) will match
any character in the position which the question mark occupies. The
asterisk (*) will match any characters to either the end of the volume
name, or the next non-asterisk character in the pattern, if there are
any. As a result of this logic, any characters between two asterisks
that may occur in the search pattern are ignored.
One special case with the asterisk feature is when a pattern is placed
in between two asterisks. CATDISK will then match any archive that
contains the pattern anywhere in the name.
To better illustrate, here are some examples:
Pattern Archive ID Match?
-------- ---------- ------
MISC1 MISC1 YES
MISC1 MISC2 NO - not an exact match
MI??? MISC1 YES - any 5 char name beginning with "MI"
MI??2 MISC2 YES - any 5 char name beginning with "MI"
that ends with "1"
MI*1 MISC1 YES - any name beginning with "MI" and ending
in "1" (any number of chars)
MI*1 MISC2 NO - doesn't end in "1"
*1 MISC1 YES - any name ending in "1" (any number of
chars)
*1 MISC2 NO - doesn't end in "1"
????? MISC1 YES - any 5 char volume name
???????? MISC2 NO - archive ID is not 8 characters long
* ANYARCH YES - any archive ID, any number of chars
AB*CD*EF ABEF YES - "CD" in the middle ignored
*GAME* AGAME001 YES - Contains "GAME" in the archive name
Note that in the last example, the presence of a leading and trailing
asterisk will cause CATDISK to search for the characters enclosed
between them as they appear literally. Wildcard characters must not
appear between these delimiters, as they cannot exist in a valid DOS
filename (i.e. the archive id) and therefore will not be matched. For
example," *DI?K*" will cause CATDISK to search for "DI?K" in the
archive id. The question mark is not a valid character in a DOS
filename, therefore no matches will be found.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 34
Depending on where you have set your output destination, the following
options are applicable:
Printer: A hardcopy file report will be printed on your printer. The
filenames will be echoed to the screen as they are sent to
the printer. Hitting <Esc> at any time during report
generation will abort it and return to the main menu.
Disk: A listing in the same format as the hardcopy file report will
be produced in a diskette file. The default name for this
file is one with the same name as the current catalog
filename with an extension of ".LST". This may be overridden
at the time that the report is generated. Hitting <Esc> at
any time during the generation of the report will abort it
and return to the main menu.
Screen: Upon entering the search spec, scanning of the catalog will
commence. If you have status indicators turned on, a counter
will increment each time a matching file is found. If at the
and of the search, no files were found, an error message will
be issued and you will be returned to the main menu.
When the search has completed successfully, the file names
will be shown alphabetically, along with the volume name,
archive name, and other directory information for that file.
For a list of options available, please see the section
entitled "SCREEN REPORT OPTIONS AVAILABLE" in this manual.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 35
OPTION 9: SHOW SELECTED FILES
Selecting option #9 will cause CATDISK to display an alphabetical list
of files. If you have the report destination set to "ASK ME", you will
be asked for a report location. After the report destination is
established, you will be asked for a filespec. This filespec follows
the conventional DOS filespec search conventions including wildcard
searches. Hit <Esc> to return to the menus without generating a
report.
Examples:
*.* - search for everything
* - same as *.*
*. - search for files with no extension
CATDISK*.* - search for files starting with CATDISK and having
any file extension
CATDISK* - same as CATDISK*.*
CATDISK*. - search for files starting with CATDISK and having
no file extension
*.COM - search for files ending in .COM
A*.EXE - search for files starting with A and ending in .EXE
CATDISK.EXE - search specifically for CATDISK.EXE
*.?Q? - search for files with an extension containing Q as
its second character
??.DOC - search for files with two letters as it filename
and .DOC as its extension
Please refer to the DOS manual for further information on file
searching patterns.
In addition to the standard DOS wildcard matching specifications,
CATDISK adds capabilities similar to the pattern matching discussed
earlier in the manual under volume name matching and archive id
matching. To apply it to a filename, simply split the filename into
its two sections (the part before the period is referred to as the
name, and the part after the period is the extension), and apply the
principals to each part. A couple of examples would be:
*D.* - match any filename whose name ends in "D" and has any
extension.
C?T*.EXE - match any filename whose name has a "C" in the first
position, any character in the second postion, a "T" in
the third position, and has an extension of ".EXE".
*.*M - match any file with any extension that ends in "M".
C*K.* - match any file with any extension whose name starts with
"C" and ends with "K".
*DISK*.* - match any file whose name contains the characters "DISK".
Note that in the last example, the presence of a leading and trailing
asterisk will cause CATDISK to search for the characters enclosed
between them as they appear literally. Wildcard characters must not
appear between these delimiters, as they cannot exist in a valid DOS
filename and therefore will not be matched. For example," *DI?K*.*"
will cause CATDISK to search for "DI?K" in the files name. The
question mark is not a valid character in a DOS filename, therefore no
matches will be found.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 36
Although this is a slight departure from the DOS standard for file
pattern matching, I'm sure that you will find that these extensions add
a little more flexibility and power to CATDISK's reporting
capabilities.
Depending on where you have set your output destination, the following
options are applicable:
Printer: A hardcopy file report will be printed on your printer. The
filenames will be echoed to the screen as they are sent to
the printer. Hitting <Esc> at any time during report
generation will abort it and return to the main menu.
Disk: A listing in the same format as the hardcopy file report will
be produced in a diskette file. The default name for this
file is one with the same name as the current catalog
filename with an extension of ".LST". This may be overridden
at the time that the report is generated. Hitting <Esc> at
any time during the generation of the report will abort it
and return to the main menu.
Screen: Upon entering the search spec, scanning of the catalog will
commence. If you have status indicators turned on, a counter
will increment each time a matching file is found. If at the
and of the search, no files were found, an error message will
be issued and you will be returned to the main menu.
When the search has completed successfully, the file names
will be shown alphabetically, along with the volume name,
archive name, and other directory information for that file.
For a list of options available, please see the section
entitled "SCREEN REPORT OPTIONS AVAILABLE" in this manual.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 37
OPTION 0: SHOW ALL FILES
This option, if viewed on the screen will product a report in the same
manner as option #9, except that ALL files in the catalog will be
included in the list. It is similar to choosing option #9 and
searching for "*.*".
If you have the report destination set to "ASK ME", you will be asked
for a report location before any further action takes place.
You may sort the full list on various criteria. Currently, you can
sort by filename, file extension, subdirectory, volume id, archive id,
comment, or file date. Additionally, there are two other "sorting"
options here that will show you just the unique files in your catalog
file, or just the duplicate files in your catalog. These two items
were placed in this menu for lack of a better place to include them in
the existing menus. The criteria for these last two reports is based
solely on the filename, and not other items such as subdirectory, file
date or file size. The reason for this is to enable you to identify
older versions of files in your catalog file that you may not require
anymore.
To start the report, just select one of the criteria from the menu that
appears and CATDISK will take care of the rest. If you decide that you
do not want to generate a report at this time, you may press <Esc> to
return to the main menu without taking any further action.
If, during the sorting process (if necessary), CATDISK runs into a disk
problem (such as a full disk), or a disk media problem (read or write
error), the process will be aborted and no report will be produced.
If you opt to view the list sorted by filename, the catalog scan and
sort will not take place, as the list is stored by filename anyway.
If you opt to view the unique or duplicate file list, a full scan will
be made through the catalog file in the same manner as before the
equivalent screen report appears before any printing takes place. The
reason for this is due to the method that CATDISK uses in comparing
filenames to determine whether they are duplicate or unique.
Depending on where you have set your output destination, the following
options are applicable:
Printer: A hardcopy file report will be printed on your printer. The
filenames will be echoed to the screen as they are sent to
the printer. Hitting <Esc> at any time during report
generation will abort it and return to the main menu.
Disk: A listing in the same format as the hardcopy file report will
be produced in a diskette file. The default name for this
file is one with the same name as the current catalog
filename with an extension of ".LST". This may be overridden
at the time that the report is generated. Hitting <Esc> at
any time during the generation of the report will abort it
and return to the main menu.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 38
Screen: When the screen is selected and a sorting option of filename
is selected, the list will appear immediately, as the catalog
file itself is arranged in that order and no physical sorting
is necessary. + name, archive name, and other directory
information for that file.
When all is ready, the file names will be shown
alphabetically, along with the volume name, archive name, and
other directory information for that file.
For a list of options available, please see the section
entitled "SCREEN REPORT OPTIONS AVAILABLE" in this manual.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 39
OPTION F1: ADD/CHANGE FILE COMMENTS
There are two places from which this feature can be activated; either
at the conclusion of the cataloging process, or from the main menu.
If you select <F1> from the main menu, you will get a sub-menu that
will allow you to specify one of two methods for deciding which files
to bring up on the screen for commenting, or to be able to bring in
comments from an external file.
If you select sub-option #1, you will be asked to specify a disk
volume. Upon entry of such, CATDISK will go through the catalog and
bring up a list of files that currently reside on that disk volume.
Optionally, you can leave the volume ID blank at the prompt. CATDISK
will bring up a point-and-shoot menu from which you can select a volume
id from those in your current catalog. See the section entitled
"Selecting A Volume Name From A List" previously discussed in this user
manual.
If you select sub-option #2, you will be asked for a filespec on which
to base the search. It functions quite similarly to option #9 (see it
for details).
If during the cataloging process (option #4), you have the auto-comment
feature turned on (either from the command line or the toggles menu),
this section will be activated after cataloging a disk, just as if you
had specified the Volume ID of the disk that you just cataloged; those
files will appear on the screen.
Once CATDISK has found a group of files for commenting, they will
appear on the screen in a format similar to the "COMMENT" screen output
format, the main difference being that one of the comments (or blanks)
are highlighted in an inverse field.
To change a comment, simply move the highlight to the file that you
wish to comment, and start typing. When you are done, hit the <Return>
key.
Other editing keys are as follows:
<Left Arrow> - move cursor one character to the left.
<Right Arrow> - move cursor one key to the right.
<Home> - move cursor to the beginning of the line
(once you have started typing).
<End> - move cursor to the end of the line
(once you have started typing).
<Ctrl>-<End> - erase from the cursor to the end of the line.
<Del> - delete the character at the cursor and shift the
characters on the right to the left.
<Backspace> - delete the character before the cursor and shift the
characters on the right to the left.
<Ins> - toggle insert/overstrike mode
- in insert mode the cursor will be slightly fatter
than the one in overstrike mode.
<Esc> - cancel the changes and restore the line to its
original contents.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 40
In some (and probably most) cases, the file list will be too large to
fit on the screen. The list may be browsed through by using the keys
on the cursor keypad. Their functions:
<UP> & <DOWN> will move the highlight bar up or down one file. If
you at a screen margin, and there are still more
files to be browsed, the listing on the screen will
scroll in the appropriate direction. If you can't move
any more, you will hear a short beep.
<PgUp> & <PgDn> will move you 15 files forward or backward in the list
If you can't move any more, you will hear a short beep.
<Home> & <End> will move you to the beginning or end of the group of
files respectively.
<F9> will repeat Last Entered Comment: This is handy if
you want to repeat a single comment at different places
in the list where <F10> (see below) won't suffice, as
the comment desired is not directly above the current
position. If no comment was previously entered, or
the last entered comment was blank, no action will be
taken.
<F10> will "Ditto": Pressing this key will copy the comment
from the entry above. It is handy if you want to copy
a comment down a consecutive list of files, or one that
was already previously entered at an earlier
time, if it is directly above the current position. If
the comment above is blank, or you are at the top of
the list, no action will be taken.
<Grey Plus> move down through the list 1/15th of the total length
of the list (see the appendix regarding the SCROLL BAR
later in this manual).
<Grey Minus> move up through the list 1/15th of the total length of
the list (see the appendix regarding the SCROLL BAR
later in this manual).
<Esc> Return to the main menu when you are done.
Sub-Option #3 - Merging Comments From A Text File
-------------------------------------------------
Sub-option #3, import comments from a text file, will allow you to
bring in file comments from an external source, be it a bbs listing
that you've either downloaded or captured with your communications
package, or any file that contains plain text. This file can contain
anything: filesizes, dates, times, etc. The only limitations are that
the file contain no tabs, and that each line be no longer then 255
characters.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 41
Many utilities such as Norton's fileinfo (FI) utility can re-direct
their output to a text file simply by appending ">TEXTFILE" (without
the quotes) to the command. Using Norton's FI utility as an example,
you could use "FI A: /C/L >TEXTFILE" to produce a file called TEXTFILE
that would contain comments for many of the files on a floppy disk.
Please refer to your Norton Utilities manual for details on how to
maintain those comments with FI.
Once you select sub-option #3, a screen containing the controlling
settings for the expected text file will appear. These settings can be
stored in a setup file (profile) for later retrieval. To avoid disk
clutter, profiles are stored in the same directory as your catalog
files. This eliminates the need for having to remember the settings
for, say, the file dump from Norton's FI as described earlier on. You
can enter the settings once, save them to a profile and be able to
recall them later on. The first item on the screen indicates what file
that the current settings came from.
The second item is the filename of the textfile from which the comments
will be read. The next 8 settings will depend on the characteristics
of the file being read. The pre-filled numbers assume that you are
reading comments from CATDISK's own report printed to disk showing both
statistics and comments.
The first setting is the beginning and ending character positions of
the filename as it appears on each line. These settings are critical
for CATDISK to be able to identify where to put each comment, and must
contain a value greater than zero.
The second setting is the beginning and ending character positions of
the subdirectory, if it exists in the text file. If the text file
contains the subdirectory in which each file resides, you may include
it with these settings, or if either the file does not contain
subdirectory information, or you do not wish to use it, you may set the
beginning and ending positions to zero. CATDISK will then ignore them.
The third setting is the beginning and ending character positions of
the volume id, if it exists in the text file. If the text file
contains the volume id for the disk on which each file resides, you may
include it with these settings, or if either the file does not contain
this information, or you do not wish to use it, you may set the
beginning and ending positions to zero. CATDISK will then ignore them.
Finally, the last setting is the starting and ending character
positions of the file comment. These values must also be set to
something that is greater than zero, as CATDISK needs a comment to
insert for each file that it finds in your catalog file.
The easiest way to determine the appropriate settings for the text file
you will be importing is to first load it into your favorite text
editor. Place the cursor on the beginning and ending characters of the
various items discussed above, and note what column the editor
indicates that the current cursor position is. These will be the
values that you will fill in to the control screen.
Here are a few important notes regarding the text file. There is
really no need to edit blank lines and headings out of the file before
processing, as the chances of CATDISK matching a filename, subdirectory
and volume id found in the appropriate character positions in a heading
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 42
with a file entry in the catalog file are quite slim. It is important
that each data line (not the headings) in the file be structured the
same way (i.e. all the columns line up as in a report). If this is not
the case, chaos in the comments fields in the affected files will
result. Lastly, CATDISK has an internal limitation of being able to
read in only the first 32,767 non-blank lines in the file. The rest
will be ignored.
All this said, changing the settings is a matter of using the <Up> and
<Down> arrow keys to highlight the desired setting, typing the new
information for that setting and hitting <Enter>. Pressing <Esc> when
not editing a setting will return you to the menu with no further
action taken.
Retrieving and saving profiles is a simple matter of typing in the
desired filename on the first line of the screen. When you do so, you
will be asked if you would like to read settings in from that file, or
save the current ones to that file. If you attempt to read in a
profile that does not exist, you will be given an error message and no
settings will be changed. If, however, the file does exist and either
a disk read error occurs or it is determined that the file is not a
valid profile, the default settings (that which were supplied the first
time you used this feature) will be brought in.
If you wish to save the current settings to disk, CATDISK will first
check to see if the file already exists. If so, you will be given a
warning to enable you to abandon the operation before you accidentally
over-write a valuable program or data file.
Any changes made in the settings during an import session will
automatically be saved to the current profile on exit from the settings
modification screen (via <Esc> or <F10>). Again, if the file named in
the first line exists, you will be given an overwrite warning in case
you don't actually want to overwrite the current saved settings with
the new ones (i.e. the import operation is a one-time shot in this
case).
Once you have all the desired settings ready, press <F10> to initiate
the insertion of comments in the catalog file. Here's what CATDISK
does to accomplish this. First, it will read and sort all the entries
in the text file. If CATDISK cannot find the text file, if there is an
error in reading the text file, or there is an error in sorting the
entries, the process will be aborted. If the sort is successful,
CATDISK will scan your current catalog file for matching entries from
the text file.
For each match that CATDISK finds, it will determine if the comment
field from the catalog file is blank (CATDISK will not overwrite
previously entered comments for the sake of integrity). If so, the
first 30 characters of the comment from the text file will be inserted
into the comment field for that file in the catalog file.
Once this process has completed, a list of the modified entries will be
brought into the comment editor for "massaging" if you would like to
clean up any entries. It is highly recommended that you at least go
through the list just to make sure that everything went ok. Below is a
discussion on how you can view and change the comments of the modified
entries.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 43
OPTION F2: SHOW FILES BY COMMENT
Selecting option <F2> will cause CATDISK to display a list of files in
accordance with a comment search spec that you supply. After selecting
a report destination, you will be asked for a comment search spec that
you wish the report to be based on.
Just enter the string that you want to search for in the catalog's
comments section and hit <Enter>, or hit <Esc> to abort the process
without generating a report.
Here's how the comments are sourced for your search spec. You enter a
"phrase" or "substring" that you want to search for in the file
comments.
The "phrase" may be an entire comment that you want, it can be just one
word, or even just one letter. When catdisk compares your "phrase" to
a comment, it checks to see if that "phrase" is contained anywhere in
that comment. If it does, that file will appear in your report.
Example: "SOURCE" would match: CATDISK V4.13 source code
CATDISK V4.13 Source code
CATDISK V4.13 SOURCE CODE
Source
... etc ...
Please note: I have had some of my beta-testers ask for wild cards in
the comment search (for example, they might not know whether they had
"Word Processor" or "Word Proc" for a comment). This is not really
necessary in this case, as, in the above case, entering "PROC" would
match both comments.
Depending on where you have set your output destination, the following
options are applicable:
Printer: A hardcopy file report will be printed on your printer. The
filenames will be echoed to the screen as they are sent to
the printer. Hitting <Esc> at any time during report
generation will abort it and return to the main menu.
Disk: A listing in the same format as the hardcopy file report will
be produced in a diskette file. The default name for this
file is one with the same name as the current catalog
filename with an extension of ".LST". This may be overridden
at the time that the report is generated. Hitting <Esc> at
any time during the generation of the report will abort it
and return to the main menu.
Screen: Upon entering the search spec, scanning of the catalog will
commence. If you have status indicators turned on, a counter
will increment each time a matching file is found. If at the
and of the search, no files were found, an error message will
be issued and you will be returned to the main menu.
When the search has completed successfully, the file names
will be shown alphabetically, along with the volume name,
archive name, and other directory information for that file.
For a list of options available, please see the section
entitled "SCREEN REPORT OPTIONS AVAILABLE" in this manual.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 44
OPTION F3: TEMPORARILY EXIT TO DOS
This option, although not really necessary, has been added in response
to the numerous requests that I have had for this feature (shows that I
am really paying attention to those suggestions, eh?). By selecting
this option, CATDISK will be temporarily suspended and you will be
returned to the DOS prompt. You may carry out any normal function that
you would ordinarily be able to carry out from DOS, provided that there
is enough memory remaining in which to run your desired program.
When you are done, simply type "EXIT" and hit <Return> to return to
CATDISK.
Please note that due to the fact that this option will in all
probability not be invoked all that often, it does not show on any of
the menus. It is, however available from the main menu by pressing
<F3>.
Please note that if you have the disk cache active at the time you use
this function, the contents of the cache will be pitched before calling
DOS.
When you are finished with DOS, and wish to return to CATDISK, simply
type "EXIT" and hit <Return> to return to CATDISK. Please be sure and
replace any disks that you had in your drives before returning to
CATDISK.
Possible errors that you may encounter when you use can vary greatly.
Possibilities are: 1) There is not enough memory to load a second copy
of the command interpreter (usually
COMMAND.COM), or that memory has been corrupted
by a resident program.
2) If you get an error after returning from DOS, it
usually means that you've loaded a resident
program while out in DOS. You should refrain
from doing so.
3) Generally, this means that CATDISK was unable to
find COMMAND.COM on the drive and directory
defined by the SET COMSPEC= environment string
(see the DOS manual for details on the SET
command). This is usually set to the location
from which COMMAND.COM was loaded when the
system was booted. If COMMAND.COM was not found
at the boot location, the root directory of the
current drive is attempted.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 45
OPTION <drive_letter>: SHOW DISK DIRECTORY
To activate this feature, simply type the drive letter of the disk
whose directory you wish to view. If you haven't included the /NW
option in your command line when you started CATDISK,you will be
prompted to insert a disk for drive D where D is the drive letter that
you typed.
You will then be asked for a filespec to match. This is the same as
the filespec prompt in OPTION #9 - SHOW SELECTED FILES. Upon doing
this, the label and directory contents will be read just like they
would if they were about to be cataloged, but instead of adding them to
your catalog, they will be shown directly on the screen in the same
format as option #7 - Show Files For A Volume. The archive scanning
feature functions as normal throughout the program.
Upon entering the search spec, scanning of the catalog will
commence. If you have status indicators turned on, a counter will
increment each time a matching file is found. If at the and of the
search, no files were found, an error message will be issued and you
will be returned to the main menu.
When the search has completed successfully, the file names will be
shown alphabetically, along with the volume name, archive name, and
other directory information for that file.
For a list of options available, please see the section entitled
"SCREEN REPORT OPTIONS AVAILABLE" in this manual.
OPTION ESC: EXIT TO DOS
Select this option when you are finished with CATDISK to terminate its
operation. Upon exit, you will be returned to the DOS prompt.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 46
APPENDIX A - THE SCROLL BAR
When bringing up a screen report, you may have noticed a hatched bar on
the left border of the screen with an inverse 'T' at the top of it and
an inverse 'B' at the bottom. This is a scroll bar, which indicates
roughly where you are located along the full length of the current
report. Additionally, this feature will allow you to roughly position
yourself in the report by hitting the <Grey Plus> and <Grey Minus>
keys. These keys will move you forward and backward respectively along
this scroll bar. These moves correspond to a move of one fifteenth of
the total length of the report in the selected direction, as will be
reflected in the page number which will be automatically set.
The scroll bar position will also wrap from the top to the bottom if
you are at the top and hit the <Grey Minus> key. The reverse is also
true for the <Grey Plus> key.
In a long report, this represents a much nicer way of getting to, say,
the files beginning with "R" without having to hit the <PgDn> key a
hundred times. Remember... the scroll bar is used to ROUGHLY position
yourself among a group of files in a screen report.
This scroll bar will appear in the point-and-shoot volume id selection
screen as well. Its functionality is much the same as that discussed
above for reports.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 47
APPENDIX B - ARCHIVE SUPPORT
This version of CATDISK currently supports the archive utilities from
System Enhancement Associates and PKWare, PAK files (similar to ARC
files) created by the PAK utility from NoGate Consulting, ZIP files
created by PKWare's PKZIP utilities, LZH files created by the LHARC
utility from Haruyasu Yoshizaki, LZS files created by the LARC utility
from K. Miki, DWC files created by the DWC utility from Dean W. Cooper,
and the public domain Library Utility (LU).
CATDISK can extract directory information from archives created with
SEAWARE'S ARC utility, version 5.30 or earlier, PKWare's PKPAK version
3.61 or earlier, or any compatible archive generating program. These
files commonly have a file extension of .ARC, and any files with this
extension will be examined by CATDISK to see if it is a valid archive.
If so, the directory information of each file in the archive will be
extracted and added to the catalog if the Auto Archive Extraction
feature is turned ON. Files extracted from an ARC file will have a
file attribute of "*ARC".
Similar to the above, any files with a .PAK extension will be examined,
and if appropriate, the directory information will be extracted from
the file in question. Files extracted from a PAK file will have a file
attribute of "*PAK".
ARC or PAK files created with utilities other than the ones listed
above should work with CATDISK, but are not guaranteed.
Files created with PKWare's PKZIP family of utilities are fully
supported. These files usually have an extension of .ZIP, and any file
found with this extension will be examined by CATDISK to see if it is a
valid ZIP file. If this is so, and the Auto Archive Extraction Feature
is turned ON, the directory information of each file in the library
will be extracted and added to the catalog. Files extracted from a ZIP
file will have a file attribute of "*ZIP". If the ZIP file contains
comments, the first 30 characters will be extracted and included in
your catalog file.
ZIP files, in addition to supporting comment entries for each file
contained, can also have a main comment for the ZIP file itself. When
CATDISK reads ZIP files and finds a main comment, it will insert that
main comment in the catalog file for any entries in the ZIP file that
do not already have comments.
Although ZIP files can contain subdirectory information, this is not
the subdirectory that will appear in the catalog listing. The reason
for this is due to the fact that the primary purpose of CATDISK is to
be able to locate a given file. In order to be able to do so, the
subdirectory of the ZIP file itself is shown. The destination of the
file when being UNZIPPED is not relevant.
Additionally, files created with Haruyasu Yoshizaki's LHARC utility are
fully supported. These files commonly end with a .LZH extension. Any
files with this extension will be examined by CATDISK to see if it is a
valid LHARC file. If so, and you wish the directory contents to be
extracted (via the program setting), the process will be carried out.
Files extracted from a LZH file will have a file attribute of "*LZH".
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 48
Files created by the LARC utility from K. Miki are supported in the
same way as those created by the LHARC utility mentioned above. Files
extracted from these files will have a file attribute of "*LZS".
Files with a .ZOO extension will be examined to determine whether they
are a valid ZOO file. If so, and Archive extraction is enabled, the
directory contents of the file will be read and included in the catalog
file. Files extracted from ZOO files will have the attribute "*ZOO".
If the ZOO file contains comments, the first 30 characters will be
extracted and included in your catalog file.
Files with a .DWC extension will be checked to determine whether they
are a valid DWC file. If so,and archive extraction is enabled, the
directory contents of the file will be read and included in the catalog
file. Files extracted from DWC files will have the attribute "*DWC".
If the DWC file contains comments, the first 30 characters will be
extracted and included in your catalog file.
Files created by the Library Utility (LU) and conform to the fifth
revision of the formal definition of the library file format are also
fully supported. These files commonly have a file extension of .LBR,
and any files with this extension will be examined by CATDISK to see if
they are valid .LBR files. If this is so, and the Auto ARCHIVE
Extraction Feature is turned ON, the directory information of each file
in the library will be extracted and added to the catalog. Files
extracted from a LBR file will have an attribute of "*LBR".
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 49
APPENDIX C - SUPPORT AND UPDATES
As I said in the introduction, I will only offer advice and technical
support to those who contribute via the SHAREWARE concept. Users who
do contribute will be notified when updates and new products are
available. Anyone wishing to offer advice and suggestions are most
welcome to do so.
I may be reached on CompuServe at I.D. # 73307,333, or on The PEARL
BBS in WATERLOO, Ontario, Canada, under my name, Rick Hillier.
You may also correspond via your FAX machine, if you have access to
one. My FAX number is (519)-884-4887. This is the best daytime number
at which to get an immediate response.
Telephone support (or any support for that matter) is available to
registered users only. My voice line is (519)-888-6763. Best time to
reach me at this number is in the evening hours (6 pm to 10 pm Ontario
Time).
Those of you who register your copy of CATDISK and wish to receive an
update to the latest version (from me and not The PEARL), please
include an extra $10.00 with your registration to cover materials and
shipping costs. I will send you the latest version of CATDISK upon
receipt of your registration. Please specify the version of CATDISK
that you currently have, or better yet, use the registration form at
the end of this user manual. If there have not been any updates made
since your version, I will wait until the next release of CATDISK to
send your update.
To receive CATDISK on a 3.5" diskette, please add an additional $2.50.
Optionally, you may include a diskette and diskette mailer with your
registration fee plus $5.00 to cover shipping costs, and I will send
you the latest version of CATDISK.
ATTENTION OUT OF TOWN CATDISK USERS
The most up to date version of CATDISK is always available on The
PEARL, which may be reached at (519)-576-6754, 24 hrs. a day. Please
note that The PEARL is a pay board (normally $25/year), but I have made
arrangements with the owners to obtain memberships for CATDISK
subscribers who include an extra five dollars with their subscription,
along with their first name, last name, and a password to use on the
board. One restriction must be made on this offer... you must live at
least 100 miles outside the Kitchener-Waterloo, Ontario, Canada area in
order to qualify. You will be validated immediately upon my receiving
your check or money order.
Please note that if you are not a regular member of this BBS, or
haven't taken advantage of the above upgrade offer, YOU WILL NOT BE
ABLE TO ACCESS THE PROGRAM.
Even if you do not wish to have a PEARL membership, you can still see
what changes and revisions have been made to date by going to the
bulletins section of the board. You do not have to be a registered
PEARL user to use this feature.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 50
If you do have a question, or a bug report, or whatever, in your
correspondence, please indicate the following:
1) The version of CATDISK that you are using.
2) The version of DOS that you are using.
3) Your hardware configuration (Model, memory size, printer, etc.)
4) Any resident software that you have loaded in memory at the time.
(i.e. Sidekick, SuperKey, Disk Caches, Print Spoolers, Ramdisks,
etc.)
This information will help me to track any problems and to suggest
reasonable solutions to your problems.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 51
APPENDIX D - QUESTIONS AND ANSWERS
As CATDISK has developed over the past while, I have received many
questions regarding the operation of CATDISK. The most common are
addressed in this section of the manual.
Q. When I go to catalog a new disk, CATDISK aborts the catalog file
update with an error message that the disk is full, even though
there is still room on the disk containing the catalog files.
A. When CATDISK updates a catalog file, it does so by merging the new
information in with the old, building a new file from the old in the
process. The catch here is that, at the end of the catalog file
update, BOTH files actually exist, thereby taking up roughly double
the size of the original catalog file. At the end of this
procedure, if successful, CATDISK deletes the old file and renames
the new temporary file to what the original catalog file was called.
The reason this is necessary is that, while re-cataloging a disk,
there is a possibility that files were removed from that disk. This
method of updating the catalog provides a convenient mechanism for
removing those files from the catalog.
Q. CATDISK currently supports archive file comments in ZIP, ZOO and DWC
files. Would it be possible to extract those from ARC files as
well?
A. ARC file comments were a non-standard extension provided by PKWare's
PKARC/PKPAK series of archivers, and as such will not be supported
at this time.
Q. Would it be possible for CATDISK to support ARCHIVES within
ARCHIVES?
A. Unfortunately, the answer is no. In order to read the directory of
an archive within another archive file, the original one must first
be expanded into its separate files. Firstly, with the ever
evolving compression methods employed with new versions of the
archive utilities, this would be beyond the scope of this program.
Secondly, there would always be the possibility of overwriting an
existing file of the same name. It's just not feasible.
Q. In the summary report, I see disk entries for which the amount of
free space and the amount of space used adds up to more than the
capacity of the disk itself. The % slack factor is also wrong.
A. You probably have a corrupted file allocation table on that disk,
and could be in for some serious trouble. Format a fresh disk and
transfer the files to it, and re-catalog it from that new disk.
Q. After starting the cataloging process on a diskette, I discovered
that the label on the diskette was wrong. Would it be possible to
abort the process, change the label and start over?
A. Once the cataloging process is started, it cannot be stopped. If
you've run into a situation like that above, let CATDISK finish the
task, and use option #3 to change the label on the diskette.
CATDISK has a mechanism to automatically change the old volume label
to the new one throughout the catalog files. It's quick and
painless.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 52
Q. We have file comments for each file entry in the catalog file.
Would it be possible to have comments for each disk in the summary
file?
A. At present, no, although this is not carved in stone. The main
reason for this is that CATDISK keeps the entire disk summary in
memory at all times. A comment on each disk would significantly
increase the memory requirements of CATDISK.
Q. I have some self-booting games. Would it be possible to create a
dummy entry for that disk in the catalog?
A. Doing this would defeat the purpose for which CATDISK was written.
Self-booting games (those that CATDISK won't read) do not have a
directory in the conventional sense. As there are no files per se
there is nothing to look for on the diskette. You need only locate
the disk itself in order to use it.
Q. I have many disks with numerous insignificant files on them such as
printer drivers, etc. Would it be possible to catalog only selected
files from these disks?
A. Unfortunately, not at this time. In order to keep the shareware
version of CATDISK simple to use as possible, all files get
cataloged hands free. However, CATDISK PLUS, a commercial release
of this program with many enhancements described in more detail in a
later appendix, will handle this type of operation.
Q. When cataloging my hard drive, CATDISK appears to be scanning for
all the files, but I list the files for it, some are missing.
A. Although CATDISK appears to be scanning all of your directories and
archives for file entries, it has an internal limitation of being
able to remember only the first 5000 files that it sees. After it
reaches this number, it simply skips over the remaining entries.
Q. Why does CATDISK slow down as my catalog files grow larger.
A. As CATDISK catalogs each disk, it must make a pass through your data
file to determine whether or not any files have been deleted or
changed, so that the catalog file can be updated accordingly. Many
other disk catalogers on the market that outperform CATDISK in their
cataloging operation retain the entire catalog in RAM. While this
is fast, there are two problems with it.
Firstly, this imposes an extreme limitation on their ultimate
capacity in terms of how many disks and files you can catalog. If
you are serious at all about maintaining a catalog of all your files
and that your library will possibly grow to many files, these types
of catalogers are not at all suitable for your usage.
Secondly, if you should experience a power outage before you've
saved your work, you can kiss that work good-bye. By manipulating
data on-disk, CATDISK does catalog your disks at a slower rate than
the above mentioned type of cataloger, but it guarantees the
integrity of your work.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 53
APPENDIX E - CATLOOK - COMMAND LINE LOOKUP UTILITY
CATLOOK is a stand alone reporting utility provided with CATDISK. It
can come in handy on occasions when you either need to generate a quick
and dirty report without having to run CATDISK itself, or when you need
to generate a report after shelling out to DOS from within an
application and there is not enough free memory left over to run
CATDISK itself. CATLOOK will run in 64K of free memory.
A summary of the usage of CATLOOK follows:
CATLOOK parameters (each must be separated by a slash or a space)
/Ffilename - Use this file for the catalog (Default is CATDISK).
NOTE: No space is allowed between the filename and the
/F.
/Px - Set printer output format to report type x, where x is:
0 - Filenames + Statistics 1 - Filenames + Comments
2 - Filenames + Statistics + Comments
/S - Show a summary report.
/Vvolume - Show files for a volume report for the volume label
specified.
/Aarchive - Show files for an archive report for the archive
specified.
/Wpattern - Show files for a DOS wildcard spec based on the pattern
given.
/Ccomment - Show files containing the comment substring specified.
/U - Show only files that are unique in the catalog file.
/D - Show only files that have duplicates in the catalog
file.
/Ex - Show everything sorted by x, where x is:
0 - File Name 1 - File Extension 2 - Subdirectory
3 - Volume Name 4 - Archive ID 5 - Comment
6 - Date/Time
Due to the simplicity of this utility, the reports generated by CATLOOK
are not paginated, but rather produced with one heading at the top of
the report followed by the appropriate listings (equivalent to setting
the number of lines per page equal to 0 in the configuration utility).
The output from CATLOOK can be redirected to a printer or disk file by
using the standard DOS method if I/O redirection. For example:
"CATLOOK /S >PRN" (without the quotes) - this will send a summary
report to your printer.
"CATLOOK /S >LISTING.TXT" - this will send the summary report to a
disk file called "LISTING.TXT".
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 54
APPENDIX F - CATDISK PLUS
Since its initial release in October of 1986, CATDISK has gone through
many changes and has received tremendous support from the many
corporations and individuals who have sent in their registration fees.
CATDISK is currently in use world-wide in more applications than I
could have possibly dreamed of. Judging from this response, I can
safely say that the SHAREWARE system is alive and flourishing as a
viable means of making quality software available at reasonable cost.
Along the way, many individuals have requested features in the program
that are not feasible in the current design of CATDISK. In creating
this program, I set out to make the operation as simple and automatic
as possible. Those requests that melded in with the current design
have been implemented, and those that will compliment same will be
implemented in the future.
However, there have been numerous requests for features that would
complicate the design of the shareware version of CATDISK - good
requests.
Therefore, it is with great pleasure that I am able to announce that a
commercial release of the program, CATDISK PLUS, which will be produced
by my software company, The DATAMEN Inc. The initial release date is
expected to be in the spring of 1990.
Please keep in mind that this shareware version will continue to be
enhanced and supported - it's still "my baby"!
Features include:
. A windowed desktop environment with pull down menus for ease of use.
. Online context-sensitive help.
. Support for the 43 line EGA and the 50 line VGA screen modes.
. Full color customization.
. All the functional features of the current shareware release.
. The ability to selectively catalog files from your disks via three
methods, all of which can be used at once: inclusion filespecs,
exclusion filespecs, and the ability to pick and choose list of
of files as read from the catalog disk.
. A greater variety of reporting features will be available as well
as a custom report generator where you can design your own report.
. Comment entries for each disk in the catalog.
. Longer file comments.
. Greater capacity for catalog size.
. A full disk manager supporting all the archive file formats that
CATDISK currently does.
. And many more!
One major consideration is that CATDISK PLUS will require a hard disk.
Suggested retail price for this product is $69.95 Cdn + $8.00 for
shipping and handling. Dealer inquiries are welcome.
Please address all inquiries to:
The Datamen Phone: (519) 888-6763
405 Barrington Lane FAX: (519) 884-4887
Waterloo, ONTARIO
Canada N2T 1H9
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 55
APPENDIX G - OTHER PRODUCTS AVAILABLE
For all you avid golfers out there, my software company, The DATAMEN,
Inc. has a golf handicap system available, called HANDICAP II, that
goes way beyond just calculating a simple golf handicap.
Among the many features of this program are:
. Pull down menus for ease of use.
. On line context sensitive help.
. Storage capacity for up to 100 different golf courses.
. Storage capacity for up to 32767 rounds of golf.
(score and number of putts on each hole can be logged)
. Instant retrieval of past played games, and the ability to browse
through them.
. An expanded handicap card that is more informative than a standard
handicap card.
. A report showing your average score on each hole on each course.
- good for spotting habitual trouble holes.
. A report showing your average putts on each green on each course.
- good for spotting habitual troublesome greens.
. A report showing how often you hit each green in regulation.
- good for analyzing your tee-to-green game on each hole.
. Many more statistical reports of interest to you.
. Full housekeeping routines to correct mistakes (but I'll bet that
you never make any, right?!?)
. Support for most popular printers.
. ALL reports may be viewed on the screen or printed on your
printer.
. Pop up windows are used extensively, adding to the ease of use of
the program.
We also have a clubhouse version available with all of the above plus:
. A simple date-differential entry system for those who do not wish
to have all the detail of the enhanced reports.
. Capacity to maintain handicaps for up to 32767 members (you are
only limited by disk size).
. Full system manager functions available only to authorized users.
. A handicap listing (in alphabetical order by member name) of the
handicaps of all the members in the system.
. This version of HANDICAP II may be used on multi-user systems
without user file conflict.
Ordering Information
The GOLFERS version of HANDICAP II is available for $69.95, and the
CLUB HOUSE version is available for $295.00.
Please note that these prices are in Canadian funds.
They may be ordered from: The Datamen, Inc.
405 Barrington Lane
Waterloo, Ontario
Canada N2T 1H9
Phone: (519)-888-6763
FAX: (519)-884-4887
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 56
CATDISK V4.45 REGISTRATION FORM
------- ----- ------------ ----
Name: ______________________________________________________________
Address: ______________________________________________________________
______________________________________________________________
______________________________________________________________
Phone: _______________________ CompuServe ID Number
(If applicable) ___________
____ Registration(s) of CATDISK @20.00 ea ___________
____ Registration(s) on The PEARL BBS @ 5.00 ea ___________
(See "OUT OF TOWN CATDISK USERS" in appendix C)
If the above offer is taken, specify desired password ___________
____ CATDISK Upgrade(s) (You Supply Diskette & Mailer) ___________
@ 5.00 ea
____ CATDISK Upgrade(s) (I supply 5.25" Diskette & Mailer) ___________
@ 10.00 ea
____ CATDISK Upgrade(s) (I supply 3.5" Diskette & Mailer) ___________
@ 12.50 ea
ONTARIO Residents Add 8% Provincial Sales Tax) ___________
Total ___________
YOU MUST BE REGISTERED TO QUALIFY FOR AN UPGRADE
Type of PC Used: ________________________ DOS Version: _______
Hardware Configuration: ______________________________________________
What Resident Software Do You Run: __________________________________
_______________________________________________________________________
_______________________________________________________________________
Comments and Suggestions: ____________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
Check or money order should be made payable to:
Rick Hillier
405 Barrington Lane
Waterloo, ONTARIO
Canada N2T 1H9
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 57
CATDISK V4.45 SITE LICENSE ORDER FORM
------- ----- ---- ------- ----- ----
Name: ________________________________________________________________
Named person above will be responsible for obtaining all program
support and upgrades.
Company: _____________________________________________________________
Address: _____________________________________________________________
_____________________________________________________________
_____________________________________________________________
____ Registrations of CATDISK @ $__________ ea ........... __________
(see fee schedule below)
____ Copies & Registrations of CATDISK @ $__________ ea .. __________
(see fee schedule below)
____ CATDISK Upgrades @ $__________ ea ................... __________
(see fee schedule below)
(Ontario Residents Add 8% Provincial Sales Tax) ..... __________
Total __________
SITE LICENSE FEE SCHEDULE FOR CATDISK
| Price per | Price per | Price per *
Quantity | Disk & Registration | Registration Only | Upgrade
--------------+---------------------+-------------------+------------
| | |
2 - 5 | $ 24.25 | $ 19.50 | $ 4.75
6 - 19 | $ 22.50 | $ 18.00 | $ 4.50
20 - 99 | $ 20.00 | $ 16.00 | $ 4.00
100 - 299 | $ 17.50 | $ 14.00 | $ 3.50
300 - 499 | $ 15.50 | $ 12.50 | $ 3.00
500 - + | $ 12.50 | $ 10.00 | $ 2.50
| | |
--------------+---------------------+-------------------+------------
* Please note that in order to receive upgrades under this agreement,
you must have purchased the same number of either registrations only
or the disk & registration combination previously.
The address at which to send any orders or correspondence is:
Rick Hillier
405 Barrington Lane
Waterloo, ONTARIO
Canada N2T 1H9
Please make any cheques payable to Rick Hillier.
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 58
CATDISK V4.45 VENDOR APPLICATION FORM
------- ----- ------ ----------- ----
Company Name: _________________________________________________________
Address: _________________________________________________________
_________________________________________________________
_________________________________________________________
Phone: _________________________________________________________
Contact: _________________________________________________________
What price are planning to charge for CATDISK? ________________________
Would you like to receive major upgrades as they become available? ____
I certify that the above named company is a legitimate shareware disk
vendor, and that the above named company will adhere to the policies
set forth in the "Public Domain and Shareware Libraries" section of the
CATDISK User Manual.
Signature: ____________________________________ Date: ________________
NOTE TO ALL PROSPECTIVE DEALERS:
In order that I can verify that you are a legitimate shareware vendor,
I request that you include a copy of your product catalog with this
application, along with a blank diskette and mailer. Once you have
been approved, you will receive written permission from myself to
include CATDISK in your library for distribution. Additionally, you
will receive your diskette back containing the latest CATDISK release.
I am also requesting that you send me revisions of your catalog as they
are published. The main reason behind this is that a mailing list of
active vendors will be maintained. My continued receipt of your
catalog will both enable me to verify that you have the most recent
CATDISK release (within reason), as well as know that your business is
still active.
When major revisions are made to the program, I will send you the
latest upgrade such that your library is kept up to date.
Send this application to:
Rick Hillier
405 Barrington Lane
Waterloo, ONTARIO
Canada N2T 1H9
Disk Catalog System (CATDISK) V4.45 Copr (C) 1986,1989 by Rick Hillier
Page 59