HPAVC/HPAVC CD-ROM.iso/pc/FREE-ENE.ZIP/FREE-ENE.TXT

Text File | 1993-02-20 | 20.5 KB | 350 lines

/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
This article is taken from NEXUS New Times Magazine Dec - Jan 1993 Vol 2 #11

----------------------------------------------------------------------------
The Adams Pulsed Electric Motor Generator - a free energy machine at last?

    THE REAL MCCOY

It is with great excitement, and appreciation to the inventor, that Nexus
publish the following information on the Permanent Magnet Electric D.C.
Motor Generator of Robert Adams, a former Chairman of the Institute of
Electrical & Electronics Engineers, Inc., U.S.A., (N.Z. Section).
    After having his invention suppressed for over 20 years, Mr Adams, at
the age 72, has decided to share his design with the world regardless of the
consequences.
    Mr. Adams' quest to bring "free" energy to the world has cost him dearly
as it has many other researchers who threaten to bring the "establishment"
undone.
    He has survived an attempt on his life by an individual affiliated with
the New Zealand Secret Intelligence Service and the Central Intelligence
Agency, direct suppression of his invention by former (and recently
deceased) Prime Minister of New Zealand, Robert Muldoon, the giant British
electronics company, Lucus Industries, as well as numerous other
insurmountable difficulties that have been placed in his path. All because
his invention worked.
    And not only that, it is so simple, any electronics manufacturer or
skilled backyard-home-scientist could build one.

    INVENTORS BEWARE!

    In 1978 Mr. Adams discovered that inventors of machines or devices of
high energy efficiency capability ("Free" Energy) are not only refused
patents, but that in most cases, their inventions are classified under the
"Military Use Clause", which is, of course, international. Inventors are
prohibited from publishing details of their devices or promoting them in any
manner of their invention is classified under this clause. In other words,
their devices automatically become the sole property of the "establishment".
    The fact that there is an established mechanism to suppress energy
inventions of this nature has been a closely guarded secret for many years.
Many inventors have made such claims, but the general public remain
oblivious to the fact that they are being deprived of clean and free energy
by organisations that would rather make money and hold power over the
public, that allow such technology to become widely available. Yet another
example of the abuse of power. (No pun intended.)

    "FREE" ENERGY

    This motor generator would be called a "Free Energy" machine by most
individuals. It is, in fact, a device that converts the perpetual motion of
sub-atomic particles, known in physics terminology as "particle spin", into
conventional electric power. It is a widely accepted fact of physical law
that sub-atomic particles are in a state of perpetual motion. Anybody who
tells you that there is no such thing as perpetual motion is either
ignorant or a liar. As Robert Adams states, "Our universe is a sea of energy
- free, clean energy. It is all out there waiting for us to set sail upon
it."
    Adams has built a number of permanent magnet electric D.C. motor
generators based on the principle outlined in this article, some of which
have demonstrated an electrical efficiency of 690% and a mechanical
efficiency of 620%. The devices run at room temperature. Any device that
doesn't could not be running at over 100% efficiency, as heat is the major
result of hysteresis losses that are induces in any conventional electric
motor or generator. Radiated heat is a sure-fire sign that a power generator
is not running over unity, as all heat radiated by such a device is wasted
energy.
    I will remind readers once again at this point that Mr Adams in not a
fly-by-night, propeller-head, whacko, techno-boffin. He is an electrical
engineer with over 60 years experience in the field of electrical
engineering, which has included designing and building equipment for use in
power stations, broadcasting facilities, airport communications centres,
etc. He is a former Chairman of the Institute of Electrical & Electronic
Engineers, Inc., U.S.A., (N.Z. Section), and his resume includes personal
referees ranging from a former New Zealand Commissioner of Police, a former
Chairman of Air New Zealand, (and several technical specialists from the
airline), as well as an Ex-NASA scientist.
    Nexus would recommend to anybody interest in, or presently building a
device of this nature, to try building a device based on Mr. Adams plans.
His machines have demonstrated the ability to generate free energy, unlike
most of the theoretical models that are promoted as over-unity devices.

    GENERAL DESCRIPTION

    The invention may be broadly said to be, an electric motor and/or
generator comprising a rotor consisting of a number of radially arrayed
permanently magnetised poles, and a stator consisting of a number of
radially arrayed permanently magnetised poles, together with a number of
wound poles.
    The rotor's permanently magnetised poles use ferrite magnetic cores, and
may comprise any even number of poles. The stator's wound poles employ steel
or iron cores.
    The device is essentially a D.C. machine, but may be fed A.C. input with
the use of a solid state converter.
    The Rotor uses a number of similar polarity permanent magnetic poles,
i.e., all-south or all-north.
    A further set of wound poles are radially arrayed in the stator, and are
arranged in such manner as to be fed energy, that is excited by back E.M.F.
energy, from the poles of the rotor. Associated circuitry is provided to
feed the energy back to the drive poles of the motor.
    The resulting characteristics of this design is that once the rotor is
moved from the position of equilibrium, each pole is attracted to, or
repulsed by the stator poles, but at a precise geometrical point with
respect to them, the input current to the drive coils ceases.
    As a result, the collapsing field current is in the opposite direction
to the applied force, thus reversing the magnetic polarity of the stator
coils. This forces the rotor poles away (reaction), which is the
instantaneous response of a system to an applied force, and is manifested as
the exertion of a force equal in magnitude, but opposite in direction to the
applied force.
    Pulsing the D.C. input current, overcomes losses generated in
conventional motors. According to classical electrical engineering theory,
efficiency is greater the more nearly equal the Back E.M.F. (electro-
motive force) is to the applied voltage, i.e. the lower the input current.
Figure 6 shows that there is minimum 100% back E.M.F. relative to the supply
source on input D.C. voltage (according to classical electrical theory),
which virtually depicts a sine wave due to the effect of the collapsing
field.
    This effect also overcomes the electrodynamic torque problems
associated with conventional motor designs. (As input power varies with the
duty cycle pulse; i.e. the lower the input current, the lower the input
current, and the lower the speed, the greater the torque.) At clip-off, the
back E.M.F. ceases, the collapsing field takes over, opposing the outgoing
rotor magnet and thus increasing momentum.
    With this design force is applied twice during each D.C. pulse, with
pulse-on, and with pulse-off.
    The timing of the pulses are determined by the dimensions of the motor
itself, i.e. the speed of rotation of the motor's central axle, the position
of the rotor magnets in relation to the stator windings, as well as the
distance that the rotor magnets travel when passing across the poles of the
stator windings. (See accompanying diagrams).

    CONSTRUCTION AND OPERATIONAL NOTES

Important Factors
    1) Care must be exercised when assembling and wiring the drive windings
to make sure that their polarities match the rotor magnet polarity.
    2) Common earthing must be avoided in order to preclude voltage and/or
current loops. (IF a number of drive windings do need to be commoned, use
very low resistance conductors and employ a transmission type earthing
system only).
    Stator (Drive) winding resistances are your choice. Robert Adams'
machines were built varying from 0.03125 to 27 ohms per set. He has
experimented with two, four, and eight pole machines. Efficiency increases
with the number of wound poles in the stator.
    Motor generators with a single, two, or three phase can be built to this
design. A number of rotors may be ganged together on the same shaft in order
to increase power output and does not require the use of any commutator,
brushes or slip rings, all of which contribute to energy losses in ordinary
motor generators.
    Unlike conventional Series D.C. machines, this motor can be off-loaded,
finds its own speed, and will run at that speed indefinitely. A conventional
DC motor will run itself to destruction with off-loading. It requires no
cooling, nor any overload protection, even if short circuited.
    A number of highly qualified individuals have seen these devices running
and producing energy at well above 100% efficiency. Let's hope that some of
you can achieve similar results.

    GENERAL CONSTRUCTION AND TESTING PROCEDURES OF THE ADAMS
    MOTOR GENERATOR

    An ideal drive winding pole can be very readily available by obtaining
some B.P.O. 3000 type relays (ex Telecom). Simply remove present winding,
cut core in half, re-thread, assemble and fill with winding. This is a quick
and cheap method of obtaining a very high quality non-retentive steel core.
As aforementioned, winding resistances used by the inventor varied between
0.03125 to 27 ohms.
    The above windings described are ample to drive prototypes even in a
180░ application. You will find speeds up to 2500 rpm with only two of these
windings 180░ apart - no problem.

For AC Output Coil Windings and Core.
    Ideal cores can be built cheaply and quickly by dismantling a spare
power of audio transformer and utilising the "I" section laminations, obtain
winding former to fit same and it is ready for winding. Turns and gauge
will depend on what voltage and current you choose. Remember, at this stage,
you should only be building a demonstration model, so to speak.
    After a few changes, corrections and/or general modifications you will
be ready to put a mechanical and/or electrical load on the machine. For an
electrical load it is suggested you firstly wire up a bank of 6 - 12 LEDs.
If everything is go, then switch over to torch lamps: Later on with a bigger
machine - car lamps, or maybe household lamps and a mechanical load
simultaneously.

For Efficiency Testing
    Milliamp meters are useless for this machine - do not use for testing.
Use only high quality digital true RMS meters, with input power, for high
accuracy, use ONLY a high quality electronic wattmeter: These instruments
measure extremely accurately any wave-shape. A good twin-beam oscilloscope
is a must: So too a high quality electronic temperature-measuring instrument
with appropriate probe.
    Drill dead centre of one or both cores, as per drawing. Probe must be
good fit. If, after one hour of running on load and temperature is around
40░, that will indicate things are most likely working correctly.
    Don't forget your ambient in Australia will be considerably higher than
ours. Read the inventor's rotary and solid state efficiency measurement data
sheet.
    Rotor-stator air gap is not critical, but the closer the better.
    As stated elsewhere, the stator pole faces, if desired, may be reduced
to 25% of the rotor pole face area, hence large drive windings and high
drive current is not required.
    With care to detail, correct mathematical calculations and high quality
instrumentation correctly utilised, incredible results can be expected.
Study data submitted shows those results have been attained on several
machines. Temperature of conventional machines internally reach boiling
point after fifteen minutes running. Check Adams Motor Generator after
running on full load for 48 hours, or after fifteen minutes if you prefer
not to wait that long. You will be very pleasantly surprised - I refer to
maximum loading conditions, not free running.

Mechanical Loading Test:
    A high quality strain measuring instrument must be used in the
universal "pony brake" method of mechanical load testing.
    RPM tests must also be obtained with a high quality tachometer and/or
oscilloscope reading and use the universal equation to calculate mechanical
machine efficiency.
    Note: Very Important Factor:
    As you increase duty cycle, current input will increase and efficiency
will decrease. From random test sheet results I have chosen it is very clear
what to expect upon increasing duty cycle.
    Note:
    The Adams Motor Generator is so efficient, so simple and consequently
it's construction is such that is surpasses overwhelmingly anything before
it, thus lending itself admirably to mass production.
    One of a number of unique features of the Adams Machine is the fact that
the same rotor poles are utilised simultaneously for driving the machine and
generating output energy.

Construction Equation - Adams Motor Generator - 20/12/76
    It was found, after considerable development work, that maximum electro-
magnetic effect produced in the stalloy stacked generating pole windings
occurred when the dimension of the mating end of the stacks were four times
greater in area than the rotor magnet's pole area. Hence the overall design
of the machine incorporates this derived ratio of one to four. (The Adams
Equation, as applies only to the Adams Machine).

Feedback - 20/12/1976
    The feedback, produced by the output generating coil, produces a
polarity reversal normally resulting in large eddy current losses in
conventional machines, but, in the Adams Machine, it is harnessed to develop
further additional torque to the magnetic rotor. The larger the output
generating coils the greater the torque delivered to the rotor.

Power Factor - 1/7/1976
    There is no power factor loss because the Adams Machine runs in a
condition of resonance. Therefore, the Power Factor Loss is zero.

    THE ADAMS PULSED ELECTRIC GENERATOR - The Conspiracy

    I have for many years been waiting the opportunity to make a start on
writing about my life as an electrical engineer and inventor, but have been
reluctant to do so because of the possible reaction from one formidable
individual who was instrumental in causing me untold frustration, ridicule,
anxiety, financial problems, and health decline.
    With the passing of Rob Muldoon, I now feel more deposed to exposing
what he and his regime subjected me to, and the possible subsequent valuable
loss to our country as a result.
    I personally had a meeting with Muldoon and others at his home office in
Tamaki regarding my invention.
    The result of the meeting was that he recommended me to the Inventions
Development Authority. In all good faith I duly contacted the inventions
development authority and that folks was the beginning of the saga which was
destined to follow.
    The Inventions Development Authority passed me along to DSIR, who at the
time were frantically working on their own energy systems, and assisting
Government with various 'Think Big' projects.
    Time rolled on, and DSIR monkeyed me around for several months; there
were, as always, excuses for not proceeding with completion of their strange
testing apparatus to test my machine.
    In the meantime, Rob Muldoon appoints himself Minister in Charge of SIS,
the department with world-wide connections to the CIA, ASIO, FBI and
Interpol!
    I had meanwhile, designed a bigger proving machine and had placed orders
overseas for magnets and devices for pulsing equipment. Time went by, well
beyond expected delivery dates, with no sign of the devices, nor any
correspondence pertaining to my orders to any of the electrical companies.
I lodged person-to-person calls to the people who originally signed the
confirming correspondence to me, to be told that "that person in no longer
with us and we cannot help you any more."
    Muldoon had by now, committed the whole country to the New Plymouth
Power Station, Huntly Power Station, Marsden Oil Refinery, etc etc. The
Government signalled its intentions that is was in no way going to let a
little outsider like me come into the act with a revolutionary machine
capable of countering the so-called energy crisis.
    Muldoon at this stage, had me well taped up so to speak, My phone, I was
informed, was tapped, my mail was intercepted and I was kept under
observation.
    I held a number of meetings with the Chief Post Office Investigating
Officer regarding the matter of mail disappearance and interception, with
the same negative and unsatisfactory answers and results as from other
Government departments. After the lapse of several months, the machine was
finally evaluated by DSIR.
    I must mention here an interesting fact regarding the evaluation of my
machine by the DSIR. It happens that a certain electrical engineer that I
was involved with, who incidentally, also evaluated my machine, informed me
that the person designated the role of evaluating my machine in DSIR, was in
fact a mechanical engineer with no background, knowledge, nor qualifications
of any description pertaining to electrical or electronic engineering, and
further that the Auckland Division did not posses a member on the staff
qualified to undertake such a project. This person none-the-less did do the
evaluation and indeed signed the test results.
    (You may well wonder how did this independent electrical engineer have
such inside information on the DSIR? Well, it so happened that he himself
had been their one and only electrical engineer in the Auckland Division,
and I might add, a specialist on electrical motors too.)
    That an unqualified person was assigned the task of evaluating the
possibilities of a revolutionary motor is further evidence to me of
conspiracy.
    DSIR Evaluation - 5.8% efficiency
    Lucas Industries Evaluation - 100% efficiency!
    Other independent eminent engineers' findings, including those of the
ex-electrical engineer from DSIR varied from 96.93% to 100% efficiency!
    At this stage, I had unwittingly invited the then chief departmental
district electrical engineer to be present at my laboratory to witness the
phenomenon of one particular model displaying identical input and output
wave forms on a twin beam oscilloscope with the machine windings running at
ambient temperature, a condition which cannot be denied as proof of 100%
efficiency, without any further tests being required.
    He conceded there was no doubt whatever what he was witnessing was real,
but like all academics who stick to their ivory tower scientific establish-
ment beliefs, he said it could not be done.
    Upon reading certain of my writings, it will be found that at one time
in earlier years, I disbelieved in any kind of conspiracy regarding
inventions pertaining to energy efficiency, and certain communication
installations. I must now say, having unwittingly got myself into the web of
the insidious conspiracy, through treading the path of an inventor in the
field of free energy, that I now know from personal experience the pitfalls,
stone walls, and blatant obstacles and barriers designed to hamper and
silence inventors with such devices as energy efficient machines.
    I decided to investigate the fate of a number of other excellent energy-
efficient inventions, and learned that too many good inventions were never
heard of again. Inventors themselves were turning into hermits, meeting with
unexplained accidents, even totally disappearing. In many cases their
laboratories were searched and ransacked, equipment confiscated and/or
destroyed, and even attempts made on their lives. Others are frequently
bought off in return for silence.
    The conspirators, who are also the cartel operators are determined to
continue to make mankind use fossil fuel for all possible energy require-
ments and will go to any lengths to achieve just that.
    I have since superseded the above machine and have built and proven two
different types of self-sustaining motor generators with efficiency ratings
well beyond unity.
----------------------------------------------------------------------------
Nexus Magazine in conjunction with Robert Adams, will be publishing
"The Adams Pulsed Electric Motor Generator Manual". This manual will be
available in mid-December and will cost AUD$40.00 per copy (including
postage).
    Send to PO Box 30, Mapleton. Qld 4560 Australia.
----------------------------------------------------------------------------
Robert Adams, 46 Landing Road, Whakatane, Bay of Plenty, New Zealand

/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\