□…濳h…潭`…濳|…濳…潭`…濳､…濳ｸ…濳ﾌ…濳ü…潭□…潭`…潭$…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭8…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭`…潭Lchosen□bootargs□□□Unknown machine type in identify_machine!
□nobats□mem=□□□<6>l2cr set to %08x
□□□<6>Instruction fetch thresold is set to %d.
□□□xmon□□□Exception in kernel pc %lx signal %d□□□Machine check in kernel mode. (regs at %p)
□□□Caused by (from srr1): L2 data cache parity error
Machine check signal
□□(probably due to access of bad physical address
□□□Transfer error ack signal
□Data parity signal
Address parity signal
□Unknown values in srr1
machine check□□Bad trap at PC: %lx, SR: %lx, vector=%lx
□child□□peer□□□parent□couldn't get device tree root
□□□□□nextprop□□□interrupt-parent□□□<6>device tree used %lu bytes
□compatible□device-treepcivcidbdma□□mac-io□isaescc□□□media-bay□□Devices:device-tree/□□interrupts□reg#interrupt-cells□□□interrupt-controller□□□open-pic□□□interrupt-map□□interrupt-map-mask□#address-cells□assigned-addresses□uni-north□□AAPL,interruptsKeylargo□□□rtas□□□<3>No RTAS service called %s
□□VM: killing process %s
<1>Unable to handle kernel NULL pointer dereference<1>Unable to handle kernel paging request□□ at virtual address %08lx (error %lx)
□kernel access of bad area pc %lx lr %lx address %lX tsk %s/%d□□Bad pmd in pte_alloc: %08lx
size-131072size-65536□size-32768□size-16384□size-8192□□size-4096□□size-2048□□size-1024□□size-512□□□size-256□□□size-128□□□size-64size-32kmem_cache□kmem_cache_init(): Offsets are wrong - I've been messed with!□□slab_cache□kmem_cache_sizes_init: Error creating caches□□□<3>kmem_create: □□□%sNULL ptr
%sCalled during int - %s
□□%sSize too small %d - %s
□□%sSize too large %d - %s
□□%sDecon but no con - %s
□□□%sOffset weird %d - %s
%sIllgl flg %lX - %s
□□%sForcing size word alignment - %s
%sDup name - %s
□□□<3>kmem_shrink: NULL ptr
□□<3>kmem_shrink: Called during int - %s
<3>kmem_shrink: Invalid cache addr %p
□<3>kmem_destroy: NULL ptr
□<3>kmem_destroy: Called during int - %s
□□□<3>kmem_destroy: Invalid cache addr %p
<3>kmem_destroy: Can't free all objects %p
<4>kmem_grow: Illegal flgs %X (correcting) - %s
□□□<3>kmem_grow: Called nonatomically from int - %s
□□<3>kmem_alloc: %s (name=%s)
□□□unknown<3>kmem_free: %s (objp=%p, name=%s)
□□□Bad slab magic (corrupt)□□□NULL ptr□□□free with no active objs□□□Either bad obj addr or double free□free from inactive slabBad obj addr□□□<3>kmalloc: Size (%lu) too large
□□<3>kfree: Bad obj %p
□□<3>kfree_s: Bad obj %p
kmem_cache_reap() called within int!
□□<3>kmem_reap: Corrupted cache struct for %s
□□□slabinfo - version: 1.0
□□□%-17s %6lu %6lu
□□□swap_out_pmd: bad pmd (%08lx)
□swap_out_pgd: bad pgd (%08lx)
□$Revision: 1.5 $□□□Starting kswapd v%.*s
□kswapd□Internal error: bad swap-device
□□□rw_swap_page: weirdness
□□□<3>rw_swap_page: Trying to %s unallocated swap (%08lx)
read□□□write□□<3>rw_swap_page: Trying to swap to unused swap-device
□<3>VM: swap page is unlocked
□□swap entry mismatchrw_swap_page: bad swap file
□□□<3>rw_swap_page: no swap file or device
□□□swap_after_unlock_page: lock already cleared
□□<3>rw_swap_page: page unused while waiting!
□□□swap_after_unlock_page: bad swap-device
□□□swap_after_unlock_page: weirdness
□Tried to swap a non-swapper page□□□VM: swap page is not in swap cache
VM: read_swap_page: page already in swap cache!
□□□VM: read_swap_page: page already in page cache!
□□□VM: rw_swap_page_nolock: page not locked!
□VM: rw_swap_page_nolock: page in swap cache!
□□Freeing swap cache page__get_free_pages local_pages list corrupted I□□__get_free_pages local_pages list corrupted II□Free pages: %6dkB
( □Free: %d (%d %d %d)
□□□%sDMA: □□□□Non%lu*%lukB □= %lukB)
□□Swap cache: add %ld, delete %ld, find %ld/%ld
□<3>swap_cache: replacing non-empty entry %08lx on page %08lx
□□<3>swap_cache: replacing page-cached entry on page %08lx
VFS: LRU block list corrupted□□LRU list corrupted□VFS: Free block list corrupted□Free list corruptedFree list emptyB_FREE inserted into queuesVFS: buffer LRU pointers corrupted□Invalid blocksize passed to set_blocksize□□<4>set_blocksize: dev %s buffer_dirty %lu size %lu
<4>set_blocksize: b_count %d, dev %s, block %lu, from %p
□□Attempt to refile free buffer
□VFS: brelse: Trying to free free buffer
□□□Whoops: end_buffer_io_async: async io complete on unlocked page
□□□Whoops: end_buffer_io_async: b_count != 1 on async io.
brw_kiovec: iobuf not initialised□□brw_page: page not locked for I/O□□VFS: grow_buffers: size = %d
□□VFS: Busy inodes after unmount. Self-destruct in 5 seconds. Have a nice day...
□□□VFS: Cannot open root device %s
□□□VFS: Mounted root (%s filesystem)%s.
□□ readonly□□/dev/root□□/□□VFS: add_vfsmnt failed for root fs□VFS: Unable to mount root fs on %s□<2>New root is busy. Staying in initrd.
□□□change_root: old root has d_count=%d
□□<5>Trying to unmount old root ... □okay
□□<3>error %d
□□□/dev/root.old□□<2>Trouble: add_vfsmnt failed
□VFS: Warning: %s using old stat() call. Recompile your binary.
binfmt-%04x□□□□□□□□□□□□□□□□<3>dupfd: fd %d, max %d
□□□□□□□…綢ô…綸@…綸`…綸ｸ…綸ﾀ…綸ﾌ…綸ﾘ…綸à…綸ð…綸è…綟8…綟0kill_fasync: bad magic number in fasync_struct!
□□□□□□□□□□□□□□□Attempting to free lock with active wait queue□Attempting to free lock with active block list□<3>locks_insert_block: remove duplicated lock (pid=%d %ld-%ld type=%d)
□□□□□□□□…繙P…繙`…繙x…繙p…繙p…繙p…繙p…繙p…繙plocks_conflict(): impossible lock type - %d
□□□□□□%s□⇥□□,□□r%ld□□□f%ld□□□%ldcr%d□□□so□eq□gt□lt□4*cr%d□+□□)□□(□□.long 0x%lx□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□ﾀ□鶺ﾀ□鸛□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□ﾀ□鼈ﾀ□齡□□□□□□□□□□□ﾀ□êｼﾀ□êﾈ□□□□□□□□□□ﾀ□êｼﾀ□êﾈ□□□□□□□□□□□ﾀ□ê菎□ë□□□□□□□□□□□ﾀ□ê菎□ë□□□□□□□□□□□□ﾀ□￣ﾀ□﹄□□□□□□□□□□ﾀ□￣ﾀ□﹄□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□ﾀ□ì□ﾀ□ìd□□□□□□□□□□□□ﾀ□ìｰﾀ□í□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□⇥□□□□□□□ﾀ□íhﾀ□ít□□⇥□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□@□□□□□□□□□□□□□□□□□□@□□□□□□□□□□□□□□□□□□@□□□□□□□□□□□□□□□□□□@□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□ﾀ□í逝□í□□□□□□□□□□ﾀ□í逝□í□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□ □□□ﾀ□íｸﾀ□îH□□□□□□□□□□□□ﾀ□î愨□îｰ□□□□□□□□□□□□ﾀ□îﾀﾀ□îü□□□□□□□□□□□ﾀ□ï□ﾀ□ï,□□□□□□□□□□□□□□□□□□□□□□ □□□□□□□□ﾀ□ï`□□□□□□ □□□□□□□□ﾀ□ï□□□□□□ □□□□□□□□ﾀ□ïｸ□□□□□□ □□□□□□□□□□□□□□□□□□ □□□□□□□□ﾀ□ïﾜﾀ□ïè□□□□□□□□□□□□□□□□□□□□□□ □□□□□□□□□□□□□□□□□□□□□□□□□□□□ﾀ□ð□ﾀ□ð$□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□ﾀ□ð4ﾀ□ðH□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□ﾀ□ðXﾀ□ð□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□invalid conditional option□attempt to set y bit when using + or - modifierillegal bitmaskvalue out of range□invalid register operand when updating□index register in load range□□□ﾀ!□ð□ □…à□□□□□□(1□□□□□ﾀ!□è□@□…à□□□□□□(1□□□□□ﾀ!□à□\□…à□□□□□□(1□□□□□ﾀ!□ﾘ□ □…à□□□□□□(1□□□□□ﾀ!□ﾐ□ □…à□□□□□□(1□□□□□ﾀ!□ﾈ□ﾀ□…à□□□□□□(1□□□□□ﾀ!□ﾀ□ﾀ□…à□□□□□□(1□□□□□ﾀ!□ｸ □□…à□□□□□□(1□□□□□ﾀ!□ｰ \□…à□□□□□□(1□□□□□ﾀ!□ｨ \□…à□□□□□□(1□□□□□ﾀ!□
0.5b□□□95/08/09□□□ext2_check_descriptors□Block bitmap for group %d not in group (block %lu)!Inode bitmap for group %d not in group (block %lu)!Inode table for group %d not in group (block %lu)!□EXT2-fs: unable to read superblock
VFS: Can't find an ext2 filesystem on dev %s.
□EXT2-fs: %s: couldn't mount because of unsupported optional features.
□EXT2-fs: %s: couldn't mount RDWR because of unsupported optional features.
□<6>isofs_read_level3_size: More than 100 file sections ?!?, aborting...
isofs_read_level3_size: inode=%lu ino=%lu
□<6>isofs_read_inode: out of memory
<4>Warning: defective cdrom. Enabling "cruft" mount option.
□□Interleaved files not (yet) supported.
File unit size != 0 for ISO file (%ld).
□□□Warning: defective cdrom (volume sequence number %d). Enabling "cruft" mount option.
□□<4>ISOFS: unable to read i-node block
□iso9660ARCHIMEDES□%3.3x□□.□□..□Unable to read rock-ridge attributes
□□Unsupported NM flag settings (%d)
□<7>ISO 9660 Extensions: □□□%c□□□Symlink component flag not implemented
<4>Attempt to read inode for relocated directory
□□Cannot have symlink with high sierra variant of iso filesystem
.□□..□/□□Symlink component flag not implemented (%d)
□□□unable to read i-node blocksymlink spans iso9660 blocks
□□□□□□<4>hfs_bnode_init: out of memory.
□<4>hfs_bnode_add: out of memory.
□□<4>hfs_bnode_bitop: node number out of range.
□<4>hfs_bnode_bitop: too few map nodes.
<4>hfs_bnode_bitop: bitmap corruption.
<4>hfs_bnode_alloc: too few map nodes.
<4>hfs_bnode_alloc: no free nodes found, count wrong?
□<4>hfs_bnode_alloc: bitmap corruption.
<4>hfs_btree_extend: header node not found.
□□□<4>hfs_btree_extend: can't build mapnode.
□<4>hfs_bnode_free: count != 1.
<4>hfs_bdelete: empty tree with bthDepth=%d
□□□<4>hfs_bdelete: can't read child node.
<4>hfs_bdelete: non-empty tree with bthDepth == 0
□<4>hfs_bdelete: corrupt btree
□<4>hfs_bdelete: unable to read left neighbor.
□<4>hfs_bdelete: unable to read right neighbor.
<4>hfs_bdelete: no siblings?
□□<4>hfs_bdelete: Missing parent.
□□□<4>hfs_bdelete: invalid arguments.
<4>hfs_bfind: empty bnode
□<4>hfs_bfind: empty key
□□□<4>hfs_bfind: corrupted b-tree %d.
<4>hfs_bfind: oversized key
□□□<4>hfs_bfind: invalid node type %02x in node %d of btree %d
□□□<4>hfs_bsucc: invalid/corrupt arguments.
□□<4>hfs_bsucc: corrupt btree
□□□<4>hfs_bsucc: oversized key
□□□<4>bad argument to shift_right: first=%d, nrecs=%d
<4>bad argument to shift_left: last=%d, nrecs=%d
□□<4>add_root: LEFT but no RIGHT
<4>hfs_binsert: out of bnodes?.
□□□<4>hfs_binsert: corrupt btree.
<4>hfs_binsert: corrupt btree
□<4>hfs_binsert: unable to split node!
□<4>hfs_binsert: Missing parent.
□□□<4>hfs_binsert: invalid arguments.
<4>hfs_binsert: oversized key
□<4>hfs_binsert: failed to create root.
<4>hfs_binsert: hfs_brec_find failed.
□<4>hfs_vbm_search_free: not a valid MDB
□□□<4>hfs_bnode_read: bad node number 0x%08x
□<4>hfs_bnode_read: corrupt node number 0x%08x
□<4>hfs_bnode_lock: invalid lock change: %d->%d.
□□□<4>hfs_bnode_find: bnode cache is corrupt.
<4>hfs_bfind: corrupt btree
□□□<4>hfs_btree_free: corrupted hfs_btree.
□□□<4>hfs_btree_init: bthNodeSize!=512 not supported
□<4>hfs_fs: entry is neither file nor directory!
□□□<4>__write_entry: invalid entry
□□□<4>hfs_write_entry: key length changed!
□□□<4>hfs_write_entry: CNID changed unexpectedly!
<4>hfs_write_entry: unable to write entry %08x
<4>hfs_cat_put: trying to free free entry: %p
□<4>hfs_fs: entry %p(%u) busy on removed device %s.
□□.□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□..□□□□□□□□□□□□□□□□□□□□□□□□□□□□⇥.resource□□□□□□□□□□□□□□□□□□□□□□□.finderinfo□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□⇥.rootinfo□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□.□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□..□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□RootInfo□□□□□□□□□□□□□□□□□□□□□□⇥%RootInfo□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□.□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□..□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□.AppleDouble□□□□□□□□□□□□□□□□□□□□.Parent□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□□RootInfo□□□□□□□□□□□□□□□□□□□□□□<4>hfs_truncate: extent has count %d.
□□□□…蜴x…蜊…蜴x…蜴x…蜴x…蜴x…蜊…蜊…蜊ô…蜴H…蜴,…蜴x…蜴x…蜴…蜴x□□□…蜿è…蜿è…蜷□…蜷□…蜷□…蜷□…蜿 …蜿x…蜿ｬ…蜿…蜷□…蜷□…蜷□…蜷□…蜷□□□□<4>hfs_fs: out of memory
□□<4>hfs_fs: Unable to read superblock
□□<4>hfs_fs: bad allocation block size %d != 512
<4>hfs_fs: unable to locate alternate MDB
□<4>hfs_fs: continuing without an alternate MDB
<4>hfs_fs: unable to read volume bitmap
□□□<4>hfs_fs: unable to initialize data structures
<4>hfs_fs: This disk has an unrecognized partition map type.
□□<4>hfs_fs: unable to locate HFS partition number %d.
□□<4>hfs_fs: unable to locate any HFS partitions.
□□□<4>hfs_fs: Partition size > 1 Terabyte.
□□□<4>hfs_fs: Partition begins beyond 1 Terabyte.
□□□□□□□□hfs,□□versionuidgidumask□□part□□□type□□□creatorquiet□□afpd□□□names□□ntal78cnetatalk□□□trivialalpha□□latin□□7bit□□□8bit□□□capfork□□□nsdc□□□single□double□case□□□la□lower□□asis□□□conv□□□btabinary□text□□□auto□□□<4>hfs_fs: AppleSingle not yet implemented.
□□□…蟐(…蟐<…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟐d…蟀ì…蟐…蟐d…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟐P…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟀ì…蟐d…蟐□<4>hfs_fs: unable to parse mount options.
□<4>VFS: Can't find a HFS filesystem on dev %s.
<4>hfs_fs: too many files.
<4>hfs_fs: get root inode failed.
□□□□□□□□□□□□□<3>hfs_fs: unable to read block 0x%08x from dev %s
insecure_locks□no_subtree_check□□□nohide□sunsecure□□kerberos□□□uidmap□wdelay□async□□all_squash□no_root_squash□root_squash□□□□insecure□□□rw□ro□%s%s□□□,□□# Version 1.0
□□□UnknownERRDOS□ERRSRV□ERRHRD□ERRCMD□<3>smb_errno: class %s, code %d from command 0x%x
□□□□□…酲L…酳è…酳è…酳 …酲T…酳ｨ…酳ﾐ…酳ｰ…酳ｸ…酳ﾐ…酳ﾐ…酲T…酳ﾀ…酲…酳ﾈ…酳ﾐ…酳ﾘ…酳à…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲ﾈ…酲ﾐ…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酳ø…酲…酲…酲…酲…酲…酲…酳à…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酳è…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酳ð…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酲…酳ø□□□…酥d…酥l…酩(…酥t…酥|□□□□□□□□□□□…酥ｨ…酥ｰ…酥ｸ…酩□…酩□…酥ﾀ…酥ﾘ…酥ﾘ…酥ﾘ…酥ﾘ…酥ﾘ…酥ﾘ…酥ﾘ…酥ﾈ…酥ﾐ<3>smb_retry: no connection process
□□□<3>smb_retry: signal failed, error=%d
□<5>smb_retry: sucessful, new pid=%d, generation=%d
<5>smb_request_ok: invalid packet!
<7>smb_request_ok: rcls=%d, err=%d mapped to 0
<5>smbfs: protocols older than LANMAN2 are not suppported [%d]
<5>smb_newconn: Failed to allocate new packet buffer: max_xmit=%d, packet_size=%d
□<7>smb_setup_header: Aieee, xmit len > packet! len=%d, size=%d
<3>udf: Danger! Kernel was compiled without enough room for udf_sb_info
□□□<3>udf: Kernel has room for %u bytes, udf needs %lu
□□□,□□novrs□□bs□unhide□undelete□□□noadinicb□□adinicbshortadlongad□gidumask□□strict□uidsessionlastblock□□anchor□volume□partition□□filesetrootdiriocharset□□utf8□□□<3>udf: bad mount option "%s=%s"
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
□□□%08x %08x %08x %08x %08x
□□%6s: %04x %3d%c %3d%c %3d%c %6d %6d %6d
□□□Inter-| sta-| Quality | Discarded packets
face | tus | link level noise | nwid crypt misc
□<6>device %s %s promiscuous mode
□□enteredleft□□□…鷙ﾄ…鷙ä…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷙ô…鷓ﾈ…鷭□…鷭□…鷓…鷓□…鷦\…鷓ｼ…鷭□…鷭□…鷓…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷸ô…鷦$…鷦T…鷭□…鷭□…鷭□…鷸<…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷦¥…鷦l…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷭□…鷸…鷸ﾔ□□□…鷽P…鷭ü…鷭4…鷭､…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭4…鷭､…鷽P…鷽P…鷭4…鷭､…鷭､…鷭､…鷭ü…鷭ü…鷭4…鷭ü…鷭4…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭､…鷭､…鷭､…鷭4…鷭ü…鷭ü…鷭ü…鷭､…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭4…鷭､…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭ü…鷭4…鷭､<6>early initialization of device %s is deferred
□□Assertion (dev->qdisc_list == NULL) failed at sch_generic.c(%d):dev_shutdown
□□802.2□□SNAP - unable to register with 802.2
□□SNAP□□□802.3□□□□□□<3>IP_MASQ:ip_masq_app_init_fwmark(): fwmark must be <= %d, sorry (shoot Juanjo)
□□ESPGREICMP□□□TCPUDPIP IP_%d□□Local□□Tunnel□Route□□Masq□□□BUG!□□□SYNACK□LISTEN□LAST_ACK□□□CLOSE_WAIT□CLOSE□□TIME_WAIT□□FIN_WAIT□□□SYN_RECV□□□SYN_SENT□□□ESTABLISHEDNONE□□□ERR!□□□?□□<3>IP_MASQ:ip_masq_hash(): request for already hashed, called from %p
□<3>IP_MASQ:ip_masq_unhash(): request for unhash flagged, called from %p
□□<3>IP_MASQ:ip_masq_new(proto=%s): no memory available.
<3>IP_MASQ:Already used connection: %s, %d.%d.%d.%d:%d => %d.%d.%d.%d:%d, called from %p
□□<3>IP_MASQ:ip_masq_new(proto=%s): could not get free masq entry (free=%d).
□□□□…ê･□…ê･4…ê･4…ê･4…ê･4…ê･□…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･□…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･4…ê･$…ê･4…ê･4…ê･,□□□□□□□…熙ｼ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ｴ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ｬ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾔ…熙ﾄ…熙ﾔ…熙ﾔ…熙ﾌ□□□□□□□…熙x…熙…熙…熙…熙…熙p…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙h…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙…熙\…熙…熙…熙□□□□□□□…熙ｨ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙 …熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ﾀ…熙ｰ…熙ﾀ…熙ﾀ…熙ｸ□□□□□□□…ê･…ê･､…ê･､…ê･､…ê･､…ê･…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･|…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･､…ê･…ê･､…ê･､…ê･□□□□□□□…ê･ﾐ…ê･è…ê･è…ê･è…ê･è…ê･ﾈ…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･ﾀ…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･è…ê･ﾘ…ê･è…ê･è…ê･à□□□□□□□…êｧ□…êｧ4…êｧ4…êｧ4…êｧ4…êｧ□…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ□…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ4…êｧ$…êｧ4…êｧ4…êｧ,<3>IPVS: ip_masq_new_vs(proto=%s): no memory available.
□□□□□□□□□□□□□□□…êｧ\…êｧ…êｧ…êｧ…êｧ…êｧx…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧp…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ…êｧ<6>IP_MASQ:ip_fw_masquerade(): change masq.addr from %d.%d.%d.%d to %d.%d.%d.%d
□□□<6>IP_MASQ:ip_fw_masq_icmp(): change masq.addr %d.%d.%d.%d to %d.%d.%d.%d□□<6>IPVS: shouldn't get here, because tun/dr is on the half connection
□<3>IP_MASQ:reverse ICMP: failed checksum from %d.%d.%d.%d!
<3>IP_MASQ:request control ADD for already controlled: %d.%d.%d.%d:%d to %d.%d.%d.%d:%d
□□□<3>IP_MASQ:request control DEL for uncontrolled: %d.%d.%d.%d:%d to %d.%d.%d.%d:%d
□<3>IP_MASQ:BUG control DEL with n=0 : %d.%d.%d.%d:%d to %d.%d.%d.%d:%d
□<3>IP_MASQ:unregister_ip_masq_app(): has %d attachments. failed
□□□<3>IP_MASQ:unregister_ip_masq_app(flags=0x%x, proto=%s,port=%u,fwmark=%d): not hashed!
□□□□□□□□□□□□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾇü…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾇô…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□…êﾈ□<3>IP_MASQ:ip_masq_app: tried to set n_attach < 0 for (proto=%s,port==%d) ip_masq_app object.
□<3>IP_MASQ:ip_masq_bind_app() called for already bound object.
□□□□□□□□□□□□…êﾍ,…êﾍD…êﾍD…êﾍD…êﾍD…êﾍ$…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍ□…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍD…êﾍ4…êﾍD…êﾍD…êﾍ<app<3>IP_MASQ:skb_replace(): no room left (from %p)
□□<3>IP_MASQ:ip_masq_app_init_fwmark(): fwmark must be <= %d, sorry (shoot Juanjo)
□□□□□…ì凅…ì呵…ì8…ì8…ì儿…ì…ì咆…ì8…ì8…ì□netconf□□□allarp_filter□hidden□log_martians□□□bootp_relayproxy_arp□□accept_source_routesend_redirects□rp_filter□□shared_media□□□secure_redirects□□□accept_redirects□□□mc_forwarding□□forwarding□default<3>IP_MASQ:ip_masq_app_init_fwmark(): fwmark must be <= %d, sorry (shoot Juanjo)
□rarp□□□□□□□…ìｰ…ìｰ…ìｱ4…ìｱ4…ìｲP…ìｱp…ìｲP…ìｲP…ìｲP…ìｲP…ìｱﾘ…ìｱﾘ…ìｱﾘ…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲ8…ìｲ8…ìｲ8…ìｲ8…ìｲ8…ìｲ8…ìｲ8…ìｲ8…ìｲ8…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲ8…ìｲ8…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲH…ìｲH…ìｲP…ìｲP…ìｲH…ìｲH…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｱè…ìｱè…ìｱè…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｱø…ìｱø…ìｱø…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲP…ìｲH…ìｲHrawnetstatsnmp□□□sockstat□□□tcpudp<6>NET4: Linux TCP/IP 1.0 for NET4.0
□□net/netlinknetlink<3>netlink: unable to get major %d
□□□□…íaà…íaà…ッ…ッ…íc@…ッﾀ…íc@…íc@…íc@…íc@…íc,…íc,…íc@…íc@…íc@…íc`…íc`…íc`…íc`…íc,…íc,…íc,…íc,…íc,…íc,…íc,…íc,…íc,…íc`…íc`…íc`…íc`…íc`…íc`…íc@…íc`…íc@…íc@…íc`…íc@…íc`…íc@…íc@…íc@…íc@…íc@…íc@…íc`…íc@…íc@…íc`…íc@…íc@…íc@…íc`…íc`…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc$…íc$…íc@…íc@…íc$…íc$…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc,…íc,…íc,…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc,…íc,…íc,…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc`…íc`…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc@…íc,…íc,□□□□□□□□□□□………………□<4>IPX: Network number collision %lx
%s %s and %s %s
□□IPX frame type 802.2TR is obsolete. Use 802.2 instead.
IPX frame type EtherII over token-ring is obsolete. Use SNAP instead.
□□%s: ide_intr: huh? expected NULL handler on exit
□□ide-probe□□ide-disk□□□ide-cd□ide-tape□□□ide-floppy□%s: driver not present
gd not in disk chain!
□%s: channel busy
□□io_32bit□□□keepsettings□□□nice1□□pio_mode□□□slow□□□unmaskirq□□using_dma□□0123456789□0123456789abcdef□□□ide_setup: %s□□none□□□noprobenowerr□cdrom□□serialize□□autotune□□□noautotune□swapdata□□□bswap□□ide-□□□ -- USE "ide%d=serialize" INSTEAD□□ -- BAD BUS SPEED! Expected value from 20 to 66reset□□dmafour□□□qd6580□ht6560bcmd640_vlb□dtc2278umc8672ali14xxdc4030□ -- SUPPORT NOT CONFIGURED IN THIS KERNEL
□ -- BAD OPTION
-- NOT SUPPORTED ON ide%d□□□□□□□□□□□□□îè□□îè□□îﾜ□□îﾈ□□îｼ□□îｨ□□î□□î□□ît□□îh□□ñü□□ñü□□ñü□□îô□□□□□□□□□□ðｬ□□ðｼ□□ðﾌ□□ðﾜ□□ðü□□ñP□□ñｼ□□ñ`□□ñl□□ñt□□□ @\…%s [remap 0->1] □□[remap +63] □□□[%d/%d/%d]□capacity□□□□□□□pers_to_level()%s/c%dd%d□□%s/c%dd%dp%d□□□hd□sd%c%c□%d□%s%c%d□%s%c□□□□□□□…î靂…î鞋…î鞋…î鞋…î鞋…î鞋…î靼…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î霾…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î霪…î霏…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î鞋…î霈…î雕 %sStrange blocksize for partition table
□ unable to read partition table
□□□ [EZD]□ [DM6:DDO]□ [DM6:MBR]□ [DM6:AUX]□ [PTBL] %s: RESETTINGING SECTOR SCALE from %d to 1 <□ >□□□%s: error reading partition table
□□media-bay□□SWIM3□□<3>Couldn't get irq %d for SWIM3
□□<6>fd%d: SWIM3 floppy controller %s
□□□in media bay□□□□□□□□□□□ramdiskramdisk: request list destroyedramdisk: block not locked□□<6>RAMDISK: bad command: %d
□□□□□□□□□□□□□□□…ï□ä…ï□h…ï□ｰ…ï□@…ï□…ï□ｰ…ï□ｰ…ï□ｰ…ï□ｰ…ï□ｰ…ï□ｰ…ï□燃AMDISK: Could not get major %dRAM disk driver initialized: %d RAM disks of %dK size
<5>RAMDISK: Compressed image found at block %d
<5>RAMDISK: romfs filesystem found at block %d
<5>RAMDISK: Minix filesystem found at block %d
<5>RAMDISK: ext2 filesystem found at block %d
□<5>RAMDISK: Couldn't find valid RAM disk image starting at %d.
RAMDISK: image too big! (%d/%ld blocks)
□□□<3>RAMDISK: could not allocate buffer
□<3>RAMDISK: could not determine device size
□□□<5>RAMDISK: Loading %d blocks [%d disk%s] into ram disk... s□□□□□□done disk #%d.
Please insert disk #%d and press ENTER
Error opening disk.
□□□Loading disk #%d... □□□%c□done.
□<5>VFS: Insert root floppy disk to be loaded into RAM disk and press ENTER
incomplete literal tree
□□ incomplete distance tree
□bad gzip magic numbers□internal error, invalid method□Input is encrypted
Multi part input
□□Input has invalid flags
□□□invalid compressed format (err=1)□□invalid compressed format (err=2)□□out of memory□□invalid compressed format (other)□□crc error□□length error□□□<3>%s□□<3>RAMDISK: Couldn't allocate gzip buffer
%s: probing with STATUS(0x%02x) instead of ALTSTATUS(0x%02x)
□□%s: IRQ probe failed (%ld)
%s: no response (status = 0x%02x), resetting drive
%s: no response (status = 0x%02x)
□%s: non-IDE drive, CHS=%d/%d/%d
□□□%s: ATAPI cdrom (?)
□□□%s: ERROR, PORTS ALREADY IN USE
□□□%s: ports already in use, skipping probe
□□%s: reset
□%s: potential irq problem with %s and %s
□□%s at 0x%03x-0x%03x,0x%03x on irq %d□□□ (%sed with %s)shar□□□serializ□□□□□ide%s: DISABLED, NO IRQ
□□%s: request_fn NOT DEFINED
%s: UNABLE TO GET MAJOR NUMBER %d
□%s: Disabled unable to get IRQ %d.
%s: probed IRQ %d and default IRQ %d failed.
□□%s: probed IRQ %d failed, using default.
□□□□□□ATAIDEideatamedia-bay□□mac-io□dbdma□□<4>ide: no address for device %s
□□ide: no intrs for device %s, using 13
□keylargo-ata□□□ata-4□□heathrow-ata□□□AAPL,bus-idpmac_ide: enabling IDE bus ID %d
□□<3>%s: unable to allocate DMA command list
%s: DMA table too small
□□□<7>%s: empty DMA table?
□□□ide_pmace: wait_for_ready, error status: %x
□□□pmac_ide_do_setfeature disk not ready before SET_FEATURE!
□pmac_ide_do_setfeature disk not ready after SET_FEATURE !
□%s: Enabling MultiWord DMA %d
□%s: Failed !
□□%s: Enabling Ultra DMA %d
□<3>pmac_ide_dmaproc: bad func %d
□□□□□□…ïTH…ïTH…ïTﾀ…ïTﾔ…ïT,…ïT□…ïT□…ïT□…ïU□□□□□□□□□□□□PCI_IDECS5530□HPT343□UM8886BF□□□UM8886AW82C105AEC6210NS87415TRM290□ALI15X3OPTI621X□□□OPTI621HT6565□CMD646□SIS5513NS87410CMD640□RZ1001□RZ1000□PDC20246□□□VP_IDE□PIIX4□□PIIX3□□PIIX□□□<6>%s: ROM enabled at 0x%08lx
□%s: IRQ1 %d IRQ2 %d
□□□%s: port 0x%04lx already claimed by %s
%s: too many IDE interfaces, no room in table
□%s: device not capable of full native PCI mode
%s: placing both ports into native PCI mode
□□□%s: rewrite of PROGIF failed, wanted 0x%04x, got 0x%04x
□□□%s: Missing I/O address #%d, please report to <mj@ucw.cz>
□%s: error accessing PCI regs
□□%s: device disabled (BIOS)
%s: device enabled (Linux)
%s: not 100%% native mode: will probe irqs later
□□%s: will probe irqs later
□%s: bad irq (%d): will probe later
%s: 100%% native mode on irq %d
□□□%s: inconsistent baseregs (BIOS) for port %d, skipping
%s: %s error updating PCICMD
□□%s: %s Bus-Master DMA disabled (BIOS)
□%s: neither IDE port enabled (BIOS)
□□□%s: ignored by ide_scan_pci_device() (uses own driver)
%s: unknown IDE controller on PCI bus %02x device %02x, VID=%04x, DID=%04x
%s: IDE controller on PCI bus %02x dev %02x
□□□ST34342A□□□CONNER CTT8000-A□□□CONNER CTMA 4000□□□Micropolis 2112A□□□WDC AC31600H□□□WDC AC33100H□□□WDC AC32500H□□□WDC AC22100H□□□WDC AC11000H□□□%s: dma_intr: bad DMA status
□□dma_intr□□□%s: misaligned DMA buffer
□%s: DMA table too small
□□□%s: empty DMA table?
□□%s: Disabling (U)DMA for %s
□□□%s: DMA disabled
□□ide_dmaproc: unsupported func: %d
□□□□□…ï](…ï],…ï]ﾘ…ï]ô…ï]□…ï]□…ï¥ô…ï]□…ï^< %s: BM-DMA at 0x%04lx-0x%04lx□□ -- ERROR, PORT ADDRESSES ALREADY IN USE
□□ -- ERROR, UNABLE TO ALLOCATE PRD TABLE
□□□, BIOS settings: %s:%s, %s:%s□□DMApio□□%s: dma_base is invalid (0x%04lx)
not a PCI device□□□expected 'R' or 'P'bad/missing register numbermissing ':'bad data, 2/4/8 digits requiredexpected whitespace after data□misaligned access□□byte□□□word□□□dword□□proc_ide_write_config: error writing %s at bus %02x dev %02x reg 0x%x value 0x%x
□□proc_ide_write_config: error %d
□□□parse error
□□□pci bus %02x device %02x vid %04x did %04x channel %d
□proc_ide_read_config: error %d reading bus %02x dev %02x reg 0x%02x
write_intr□%s: buffer list corrupted (%ld, %ld, %d)
□□multwrite_intr□set_multmode□□□set_geometry_intr□□recal_intr□<3>%s: no DRQ after issuing %s
MULTWRITE□□WRITE□□<3>%s: bad command: %d
<3>%s: bad special flag: 0x%02x
□□□%i
(none)
%04x%c□smart_thresholds□□□smart_values□□□geometry□□□cache□□bios_cyl□□□bios_head□□bios_sect□□bswap□□multcount□□nowerr□breada_readahead□□□file_readahead□max_kb_per_request□ide-disk□□□1.08□□□<6>%s: %.40s, %ldMB w/%dkB Cache, CHS=%d/%d/%d□, UDMA□, (U)DMA□□□, DMA□□□□<3>ide-disk: %s: Failed to register the driver with ide.c
□<3>%s: INVALID GEOMETRY: %d PHYSICAL HEADS?
□□□□□□□ﾀ"ｶä□□□ﾀ"ｶﾔ□□□ﾀ"ｶﾈ□□□ﾀ"ｶﾀ□□□ﾀ"ｶｰ□□□ﾀ"ｶ#□ﾀ"ｶx%□ﾀ"ｶ`(□ﾀ"ｶX*□ﾀ"ｶL+□ﾀ"ｶD.□ﾀ"ｶ0/□ﾀ"ｶ$5□ﾀ"ｶ□B□ﾀ"ｶ□C□ﾀ"ｵðD□ﾀ"ｵäE□ﾀ"ｵﾔF□ﾀ"ｵﾀG□ﾀ"ｵｰH□ﾀ"ｵJ□ﾀ"ｵxK□ﾀ"ｵhN□ﾀ"ｵXQ□ﾀ"ｵHR□ﾀ"ｵ0S□ﾀ"ｵ□T□ﾀ"ｵ□U□ﾀ"ｵ□X□ﾀ"ｴìZ□ﾀ"ｴﾜ[□ﾀ"ｴﾐ｡□ﾀ"ｴﾈ｢□ﾀ"ｴｼ｣□ﾀ"ｴｰ､□ﾀ"ｴ､ｦ□ﾀ"ｴｧ□ﾀ"ｴｨ□ﾀ"ｴ\ｬ□ﾀ"ｴpｭ□ﾀ"ｴ¥ｭ□ﾀ"ｴHｶ□ﾀ"ｴ8ｹ□ﾀ"ｴ,ｺ□ﾀ"ｴ$ｻ□ﾀ"ｴ□ｼ□ﾀ"ｴ□ｽ□ﾀ"ｳüｾ□ﾀ"ｳôRead CDMechanism Status□□□Play CDSet Speed□□Scan□□□Read CD MSFSet Streaming□□Read DVD Structure□Send DVD Structure□Get PerformanceRead 12Set Read-ahead□Load/UnloadReport Key□Send Key□□□Send Event□Blank□□Close TrackMode Sense 10□□Repair Rzone Track□Mode Select 10□Send OPC□□□Reserve Rzone TrackRead Track Rzone Info□□Read Disc Info□Stop Play/Scan□Pause/Resume□□□Get Event Status Notification□□Play Audio TrackIndex□□Play Audio MSF□Get Configuration□□Play Audio 10□□Read HeaderRead Table of Contents□Read SubchannelFlush CacheVerify 10□□Write and Verify 10Seek□□□Write 10□□□Read 10Read Cd/Dvd Capacity□□□Read Format Capacities□Prevent/Allow Medium Removal□□□Start/Stop UnitInquiryFormat UnitRequest Sense□□Test Unit Readyﾀ"ｷﾈﾀ"ｷｸﾀ"ｷｬﾀ"ｷ愨"ｷ限"ｷ|ﾀ"ｷlﾀ"ｷ¥ﾀ"ｷPﾀ"ｷPﾀ"ｷPﾀ"ｷ@ﾀ"ｷPﾀ"ｷPﾀ"ｷ4ﾀ"ｷPMiscompare□Aborted command(reserved)□Data protect□□□Unit attention□Illegal requestHardware error□Medium error□□□Not ready□□Recovered errorNo sense data□□□□□□ﾀ"ﾍl□□□□ﾀ"ﾍP□□□□ﾀ"ﾍ8□□□□ﾀ"ﾍ□□□□□ﾀ"ﾌì□□□□ﾀ"ﾌﾈ□□□
ﾀ"ﾌ､□□□ﾀ"ﾌt□□□□ﾀ"ﾌX□□□□ﾀ"ﾌ,□□□□ﾀ"ﾌ□□□□□ﾀ"ﾋﾐ□□□□ﾀ"ﾋｨ□□□ﾀ"ﾋx□□□□ﾀ"ﾋ<□□□□ﾀ"ﾋ□□□□□ﾀ"ﾊð□□□□ﾀ"ﾊﾔ□□]ﾀ"ﾊ□□]□ﾀ"ﾊL□□]…ﾀ"ﾊ□□□s□ﾀ"ﾉø□□□ﾀ"ﾉﾈ□□□□ﾀ"ﾉ□□□□ﾀ"ﾉP□□□□ﾀ"ﾉ□□□□□ﾀ"ﾈð□□□ﾀ"ﾈｸ□□0ﾀ"ﾈ□□:ﾀ"ﾈ□□Sﾀ"ﾈh□□Wﾀ"ﾈD□□□ﾀ"ﾈ$□□□□ﾀ"ﾈ□□□□□ﾀ"ﾇø□□□ﾀ"ﾇì□□□□ﾀ"ﾇｼ□□□□ﾀ"ﾇ□□□□ﾀ"ﾇl□□□□ﾀ"ﾇH□□□□ﾀ"ﾇ □□□□ﾀ"ﾇ□□□□□ﾀ"ﾆè□□□□ﾀ"ﾆﾈ□□□ ﾀ"ﾆｨ□□□ﾀ"ﾆ□□□□ﾀ"ﾆx□□1□ﾀ"ﾆ`□□2ﾀ"ﾆ<□□2□ﾀ"ﾆ □□Qﾀ"ﾆ□□□rﾀ"ﾅø□□r□ﾀ"ﾅﾐ□□r□ﾀ"ﾅｨ□□sﾀ"ﾅ□□s□ﾀ"ﾅt□□s□ﾀ"ﾅT□□s□ﾀ"ﾅ(□□s□ﾀ"ﾅ□□□s□ﾀ"ﾄﾘ□□□ﾀ"ﾄﾄ□□□ﾀ"ﾄｸ□□ ﾀ"ﾄ □□ □ﾀ"ﾄ□□ □ﾀ"ﾄt□□ □ﾀ"ﾄ¥□□□ﾀ"ﾄ@□□□□ﾀ"ﾄ□□□□□ﾀ"ﾃè□□<ﾀ"ﾄ□□□@ﾀ"ﾃﾀ□□Dﾀ"ﾃ□□ｶﾀ"ﾃ|□□□ﾀ"ﾃ`□□ ﾀ"ﾃ@□□,ﾀ"ﾃ(□□!ﾀ"ﾃ□□□!□ﾀ"ﾂè□□$ﾀ"ﾂﾈ□□&ﾀ"ﾂｨ□□&□ﾀ"ﾂ□□&□ﾀ"ﾂx□□'ﾀ"ﾂ`□□,ﾀ"ﾃ(□□,□ﾀ"ﾂ<□□,□ﾀ"ﾂ□□□0□ﾀ"ﾁø□□0□ﾀ"ﾁﾌ□□9ﾀ"ﾁｬ□□Nﾀ"ﾁ□□S□ﾀ"ﾁp□□Uﾀ"ﾁX□□cﾀ"ﾁ,□□dﾀ"ﾀø□□oﾀ"ﾀｸ□□o□ﾀ"ﾀ\□□o□ﾀ"ﾀD□□o□ﾀ"ﾀ□□□o□ﾀ"ｿä□□o□ﾀ"ｿｨ□□r□ﾀ"ｿp□□r□ﾀ"ｿD□□r□ﾀ"ｿ□□□ｿﾀ"ｿ□□□(ﾀ"ｾﾐ□□)ﾀ"ｾ､□□*ﾀ"ｾ□□*□ﾀ"ｾx□□.ﾀ"ｾX□□?ﾀ"ｾ(□□?□ﾀ"ｾ□□□Zﾀ"ｽﾔ□□Z□ﾀ"ｽｴ□□ｹﾀ"ｽ…□□ﾀ"ｽl…□ﾀ"ｽ<…□□ﾀ"ｽ□…□□ﾀ"ｼﾌ…□ﾀ"ｼ …□ﾀ"ｼ|…□□ﾀ"ｼT…□□ﾀ"ｼ0…%ﾀ"ｼ□…Lﾀ"ｻì…>ﾀ"ｻﾀLogical unit has not self-configured yet□□□Logical unit failed self-configuration□Logical unit not supported□Logical unit communication time-outLogical unit communication parity errorLogical unit communication failure□Logical unit does not respond to selection□Logical unit not ready, manual intervention required□□□Logical unit not ready, initializing command required□□Logical unit not ready, cause not reportable□□□Logical unit is in process of becoming ready□□□Play operation aborted□Operator medium removal requestOperator request or state change input (unspecified)□□□Microcode has been changed□Logical unit operating conditions have changed□Insufficient time for operationMode parameters changedParameters changed□Power on, reset or hardware reset occurred□Not ready to ready transition, medium may have changed□Loss of streaming□□No more RZONE reservations are allowed□Empty or partially written reserved track□□Session fixation error - incomplete track in session□□□Drive region must be permanent / region reset count error□□Media region code is mismatched to logical unitRead of scrambled sector without authenticationCopy protection key exchange failure - Key not established□Copy protection key exchange failure - Key not present□Copy protection key exchange failure - Authentication failure□□Illegal mode for this track or incompatible medium□End of user area encountered on this track□System resource failureMedium removal prevented□□□Overlapped commands attempted□□Saving parameters not supportedCannot read medium - incompatible format□□□Cannot read medium - unknown formatCurrent program area is empty□□Current program area is not empty□□Write protected media□□Parameter value invalidParameter not supportedInvalid field in parameter listInvalid field in command packetInvalid address for write□□Logical block address out of range□Command sequence error□Invalid command operation code□Parameter list length errorMedia load mechanism failedInternal CD/DVD logical unit failure□□□Diagnostic failure on component (ASCQ)□Positioning error detected by read of medium□□□Mechanical positioning or changer errorRandom positioning error□□□Spindle servo failure□□Focus servo failureTracking servo failure□Track following error□□Write faultNo seek complete□□□Program memory area / RMA is (almost) full□Program memory area / RMA is full□□Program memory area / RMA update failure□□□Power calibration area error□□□Power calibration area is full□CD control error□□□Session fixation error writin lead-out□Session fixation error writin lead-in□□Session fixation error□Erase failure□□Defect list update failure□No defect spare location available□Format command failed□□CIRC unrecovered error□Unrecovered read error□Write error - loss of streamingWrite error - recovery failed□□Write error - recovery needed□□Block not compressible□Data expansion occurred during compressCompression check miscompare error□Write error - recommend reassignment□□□Write error - auto reallocation failed□Write error - Recovered with auto reallocation□Write errorExcessive write errors□No write current□□□Peripheral device write fault□□Unable to recover table of contentsMedia load or eject failed□Medium not present□Incompatible medium installed□□No reference position found (media may be upside down)□In process of becoming ready - writing□Logical unit not ready - manual intervention required□□Logical unit not ready - initializing command required□Logical unit not ready - in progress [sic] of becoming ready□□□Logical unit not ready - cause not reportable□□Power calibration area almost full□Failure prediction threshold exceeded - False□□Failure prediction threshold exceeded - Predicted media failureFailure prediction threshold exceeded - Predicted logical unit failure□Recovered data with L-EC□□□Recovered data with CIRC□□□Recovered data - the data was auto-reallocated□Recovered data with error correction and retries applied□□□Recovered data with error correction applied□□□Recovered data using previous sector IDRecovered data with retries and/or CIRC appliedRecovered data with negative head offset□□□Recovered data with positive head offset□□□Recovered data with retriesRecovered data with no error correction appliedWrite error - padding blocks added□No current audio status to return□□Play operation stopped due to errorPlay operation successfully completed□□Play operation paused□□Play operation in progress□No additional sense informationATAPI device %s:
<5>%s: The drive reports both %d and %d bytes as its capacity
□<3>ide-floppy: Can't get floppy parameters
<6>%s: %dkB, %d blocks, %d sector size
<3>%s: %d bytes block size not supported
□□<5>%s: warning: non 512 bytes block size not fully supported
□□<3>%s: No disk in drive
□□□<3>%s: Invalid capacity for disk in drive
□CD-ROM□ZIP<3>ide-floppy: Protocol is not ATAPI
□□<3>ide-floppy: Device type is not set to floppy
□□□<3>ide-floppy: The removable flag is not set
□□<3>ide-floppy: Sorry, DRQ type %d not supported
□□□<3>ide-floppy: Packet size is not 12 bytes long
□□□bios_cyl□□□bios_head□□bios_sect□□breada_readahead□□□file_readahead□max_kb_per_request□IOMEGA ZIP 100 ATAPI□□□IOMEGA Clik! 40 CZ ATAPI□□□geometry□□□ide-floppy□0.94□□□<3>ide-floppy: %s: not supported by this version of ide-floppy
<3>ide-floppy: %s: Can't allocate a floppy structure
□□<3>ide-floppy: %s: Failed to register the driver with ide.c
□□□…□□…□□□□□□□□□□□□□□…□□□□□□□□□□…□□□□□□□□□□…□□□□□□…<3>keyboard.c: do_lowercase was called - impossible
□□□<3>do_fn called with value=%d
□0123456789+-*/,.?()□□□pqrstuvwxylSRQMnnmPQ□□□…ðCｴ…ðCｼ…ðCﾄ…ðCﾌ…ðCﾔ…ðD□…ðCﾜ…ðCä…ðCì…ðCü…ðD(…ðD(…ðD(…ðD(…ðD(…ðCｬ…ðCｬBDCA□□□□□□□%s%d□□□NULL tty□□□Warning: bad magic number for tty struct (%s) in %s
□□□Warning: null TTY for (%s) in %s
□□Warning: dev (%s) tty->count(%d) != #fd's(%d) in %s
□□□tty-ldisc-%d□□□Couldn't open N_TTY ldisc for %s --- error %d.□tty_check_change: tty->pgrp <= 0!
□⇥Sense class %x, sense error %x, extended sense %x
Prevent/Allow Medium Removal□□□Send DiagnosticReceive Diagnostic□Start/Stop UnitMode Sense□Erase□□Copy□□□ReleaseReserveMode SelectRecover Buffered Data□□Verify□InquirySpace□□Write FilemarksRead Reverse□□□Seek (6)□□□Write (6)□□Read (6)□□□Reasssign Blocks□□□Read Block Limits□□Format UnitRequest Sense□□Rezero UnitTest Unit ReadyWrite Long□Read Long□□Update Block□□□Read BufferWrite Buffer□□□Copy VerifyCompareMedium ScanRead Defect Data□□□Lock/Unlock Cache□□Synchronize Cache□□Prefetch or Read Position□□Set Limits□Search Low□Search Equal□□□Search HighWrite Verify□□□Read updated block□Seek (10)□□Write (10)□Read GenerationRead (10)□□Read Capacity□□Define window parameters□□□Mode Sense (10)Mode Select (10)□□□Log Sense□□Log Select□Pause/resume□□□Play track relative (10)□□□Play audio track/index□Play audio msf□Play audio (10)Read headerRead TOC□□□Read sub-channel□□□Write Same□Change Definition□□Read element statusRead defect data(12)□□□Send volume tagRequest volume element address□Set limits(12)□Search data low(12)Search data equal(12)□□Search data high(12)□□□Verify(12)□Write and verify(12)□□□Erase(12)□□Write(12)□□Play track relative(12)Read(12)□□□Exchange mediumMove medium/play audio(12)□RESERVED□□□VENDOR SPECIFIC%s(0x%02x) %s %02x □□□□Queue Full□Command Terminated□Reservation Conflict□□□Intermediate-Condition Met□Intermediate□□□Busy□□□Condition Met□□Check ConditionGood□□□Power-on or self-test failure (%x)□Data path failure (%x)□Diagnostic failure on component (%x)□□□Ram failure (%x)□□□Illegal mode for this trackEnd of user area encountered on this track□Scan head positioning errorOut of focus□□□Unable to acquire videoVideo acquisition errorLamp failure□□□Spindles not synchronized□□Spindles synchronized□□Rpl status change□□Log list codes exhausted□□□Log counter at maximum□Threshold condition metLog exception□□Operator selected write permit□Operator selected write protectOperator medium removal requestOperator request or state change input (unspecified)□□□Updated block read□Generation does not exist□□Unable to recover table-of-contentsSystem resource failureScsi to host system interface failure□□Medium removal prevented□□□Unload tape failureMedia load or eject failed□Cartridge faultErase failure□□Position error related to timing□□□Write append position errorWrite append error□Overlapped commands attempted□□Logical unit failed self-configuration□Data phase error□□□Command phase errorInvalid message error□□Initiator detected error message received□□Scsi parity error□□Unsuccessful soft resetSelect or reselect failure□Internal target failureMessage error□□Inquiry data has changed□□□Changed operating definition□□□Microcode has been changed□Target operating conditions have changed□□□Logical unit has not self-configured yet□□□Invalid bits in identify message□□□Medium source element emptyMedium destination element fullPosition past beginning of medium□□Position past end of mediumRead past beginning of medium□□Read past end of mediumReposition error□□□Failed to sense bottom-of-form□Failed to sense top-of-formPaper jam□□Slew failure□□□Tape or electronic vertical forms unit not ready□□□Tape position error at end-of-medium□□□Tape position error at beginning-of-medium□Sequential positioning error□□□Medium not present□Saving parameters not supportedRounded parameter□□Ribbon, ink, or toner failure□□Tape length error□□Defect list update failure□No defect spare location available□Format command failed□□Medium format corruptedCleaning cartridge installed□□□Cannot read medium - incompatible format□□□Cannot read medium - unknown formatIncompatible medium installed□□Commands cleared by another initiator□□Overwrite error on update in place□Invalid combination of windows specified□□□Too many windows specified□Command sequence error□Copy cannot execute since host cannot disconnect□□□Log parameters changed□Mode parameters changedParameters changed□Power on, reset, or bus device reset occurred□□Import or export element accessed□□Not ready to ready transition (medium may have changed)Write protectedThreshold parameters not supported□Parameter value invalidParameter not supportedInvalid field in parameter listLogical unit not supported□Invalid field in cdb□□□Illegal function (should use 20 00, 24 00, or 26 00)□□□Invalid element addressLogical block address out of range□Invalid command operation code□Recovered id with ecc correction□□□Miscompare during verify operation□Grown defect list not foundPrimary defect list not found□□Defect list not found□□Synchronous data transfer errorParameter list length errorDefect list error in grown listDefect list error in primary list□□Defect list not available□□Defect list error□□Recovered data - recommend reassignmentRecovered data with lecRecovered data with circ□□□Recovered data - data auto-reallocated□Recovered data with error correction and retries applied□□□Recovered data with error correction applied□□□Recovered data without ecc - recommend reassignmentRecovered data without ecc - data auto-reallocated□Recovered data using previous sector idRecovered data with retries and/or circ appliedRecovered data with negative head offset□□□Recovered data with positive head offset□□□Recovered data with retriesRecovered data with no error correction appliedData synchronization mark errorPositioning error detected by read of medium□□□Mechanical positioning error□□□Random positioning error□□□Block sequence error□□□End-of-data not found□□Filemark or setmark not found□□Record not found□□□Recorded entity not found□□Address mark not found for data field□□Address mark not found for id fieldUnrecovered read error - recommend rewrite the dataUnrecovered read error - recommend reassignmentMiscorrected error□No gap found□□□Incomplete block read□□Data resynchronization error□□□Circ unrecovered error□L-ec uncorrectable error□□□Unrecovered read error - auto reallocate failedMultiple read errors□□□Error too long to correct□□Read retries exhausted□Unrecovered read error□Id crc or ecc errorWrite error - auto reallocation failed□Write error recovered with auto reallocation□□□Write errorError log overflow□Spindle servo failure□□Focus servo failureTracking servo failure□Track following error□□Logical unit communication parity errorLogical unit communication time-outLogical unit communication failure□Multiple peripheral devices selected□□□No reference position foundLogical unit does not respond to selection□Logical unit not ready, format in progress□Logical unit not ready, manual intervention required□□□Logical unit not ready, initializing command required□□Logical unit is in process of becoming ready□□□Logical unit not ready, cause not reportable□□□Excessive write errors□No write current□□□Peripheral device write fault□□No seek complete□□□No index/sector signal□No current audio status to return□□Audio play operation stopped due to error□□Audio play operation successfully completedAudio play operation pausedAudio play operation in progress□□□I/O process terminated□End-of-data detected□□□Beginning-of-partition/medium detected□Setmark detected□□□End-of-partition/medium detected□□□Filemark detected□□Key=15□Miscompare□Volume OverflowEqual□□Aborted CommandCopy Aborted□□□Key=9□□Blank CheckData Protect□□□Unit Attention□Illegal RequestHardware Error□Medium Error□□□Not Ready□□Recovered ErrorNone□□□[valid=0] □Info fld=0x%x, FMK □□□EOM □□□ILI □□□CurrentDeferred□□□Invalid%s%s: sense key %s
Additional sense indicates %s
□Additional sense indicates %s%s: old sense key %s
%s%s: sns = %2x %2x
□□□Non-extended sense class %d code 0x%0x Release Recovery□□□Initiate Recovery□□Clear QueueAbort Tag□□Bus device reset□□□Linked Command Complete w/flag□Linked Command CompleteMessage Parity Error□□□NopMessage Reject□Abort□□Initiator ErrorDisconnect□Restore Pointers□□□Save Pointers□□Command Complete□□□Ordered Queue TagIgnore Wide Residue□□□Head of Queue Tag□□Simple Queue Tag□□□Wide Data Transfer Request□SCSI-I Extended Identify□□□Synchronous Data Transfer Request□□Modify Data PointerExtended Message, reserved code (0x%02x) □□pointer = %d□□□period = %d ns, offset = %dwidth = 2^%d bytes□Identify disconnect %sallowed %s %d □□□□□□□not □□□target routine□lunreserved (%02x) □□□%s %02x □□□reserved two byte (%02x %02x) □scsi%d : destination target %d, lun %d
command = □DID_SOFT_ERROR□DID_PASSTHROUGHDID_BAD_INTR□□□DID_RESET□□DID_ERROR□□DID_PARITY□DID_ABORT□□DID_BAD_TARGET□DID_TIME_OUT□□□DID_BUS_BUSY□□□DID_NO_CONNECT□DID_OK□Hostbyte=0x%02xis invalid (%s) □□DRIVER_HARDDRIVER_TIMEOUT□DRIVER_INVALID□DRIVER_ERROR□□□DRIVER_MEDIA□□□DRIVER_SOFTDRIVER_BUSYDRIVER_OK□□SUGGEST_SENSE□□SUGGEST_DIESUGGEST_REMAP□□SUGGEST_ABORT□□SUGGEST_RETRY□□SUGGEST_OK□Driverbyte=0x%02x□□(%s,%s) □□□invalid$Header: /mnt/ide/home/eric/CVSROOT/linux/drivers/scsi/scsi_error.c,v 1.10 1997/12/08 04:50:35 eric Exp $□□scsi: trying to call schedule() in interrupt, file %s, line %d.
□cannot allocate scsi_result in scsi_request_sense.
cannot allocate scsi_result in scsi_test_unit_ready.
□□scsi%d (%d,%d,%d) : RESERVATION CONFLICT
□□□□□□…ò乢…ò壟…ò,…ò娜…ò壟…ò壟…ò,…ò4…ò它…ò峅…ò …ò,…ò垈…ò崑…ò垈…ò它…ò廏…ò它…ò它…ò它…ò垈…ò它…ò垈…ò它…ò嶽…ò它…ò它…ò它…ò它…ò垈…ò它…ò它…ò嶌□□□□□□□□□□□…ò怙…ò彖…ò怙…ò怦…ò怦…ò怦…ò怦…ò怦…ò怙…ò怦…ò怙…ò怦…ò怦…ò怦…ò怦…ò怦…ò怦…ò怙…ò怦…ò怦…ò怦□□□□□□□□□□□…ò愼…ò愼…ò悧…ò愍…ò愼…ò愼…ò悧…ò愼…ò愼…ò愼…ò愼…ò愍…ò愼…ò愼…ò愼scsi_unjam_host: Miscount of number of failed commands.
□□□scsi_eh_%d□□□□□□□□□□□□□SCSI host %d abort (pid %ld) timed out - resetting
□SCSI host %d reset (pid %ld) timed out - trying to shake it loose
□SCSI host %d reset (pid %ld) timed out again -
probably an unrecoverable SCSI bus or device hang.
…ò･ð…òｦ□…òｦ0…òｦ0…òｦl…òｦl□□□□□□□…òｨ4…òｨ<…òｨD…òｨd…òｨl…òｨl…òｨD…òｨl…òｨl…òｨl…òｨd…òｨ¥…òｨl…òｨd…òｨdscsi%d: device driver called scsi_done() for a synchronous reset.
scsi%d channel %d : resetting for second half of retries.
□Internal error in file %s, line %d.
□□□…òｧ`…òｩ…òｩ8…òｨà…òｩ…òｩ…òｩ8…òｩ@…òｩ□□□□□□□□□□□…òｧﾘ…òｨ¥…òｪ□…òｨ…òｩﾔ…òｨ…òｨ…òｨ…òｪ□…òｨ…òｪ□…òｨ…òｩ(…òｨ…òｨ…òｨ…òｨ…òｨ¥…òｨ…òｨ…òｩﾔStale command on %d %d:%d appears to have died when the bus was reset
□scsi : aborting command due to timeout : pid %lu, scsi%d, channel %d, id %d, lun %d □□□□□□□□□□□□□□□…òｬx…òｬﾐ…òｬｸ…òｬx…òｬﾜ…òｬüSCSI bus is being reset for host %d channel %d.
□□□□□□□…òｱD…òｰ□…òｯ…òｯﾘ…òｰ4…òｰ,…òｱ¥□□□$Header: /mnt/ide/home/eric/CVSROOT/linux/drivers/scsi/scsi_queue.c,v 1.1 1997/10/21 11:16:38 eric Exp $□□□%s
The driver does not yet support the proc-fs
□□□Not enough memory to register SCSI HBA in /proc/scsi !
□□Detected scsi %sdisk %s at scsi%d, channel %d, id %d, lun %d
□□removable □□□□□scsi_devices corrupt (sd)□□Device busy for revalidation (usage=%d)
□□□scsidisk I/O error: dev %s, sector %lu
end_scsi_request: buffer-list destroyed
□□□CD-ROM I/O error: dev %s, sector %lu
□□end_scsi_request: buffer-list destroyed
□□□cdrom□□sr□sr.c: linked page request (%lx %x)□sr%d: CD-ROM error: □□□command was: □□<6>sr%d: CD-ROM not ready. Make sure you have a disc in the drive.
□□□scsi%d: MEDIUM ERROR on channel %d, id %d, lun %d, CDB: □□□scsi%d: VOLUME OVERFLOW on channel %d, id %d, lun %d, CDB: SCSI CD error : host %d id %d lun %d return code = %03x
□□□CD-ROM: request list destroyed□CD-ROM: block not locked□□□sr: can't switch blocksize: in interrupt
□□Unknown sr command %d
□Warning - running *really* short on DMA buffers
□□□SCSI DMA pool exhausted.□□□Bad sr request listWarning: Running low on SCSI DMA buffers
□□Detected scsi CD-ROM sr%d at scsi%d, channel %d, id %d, lun %d
□□□Abort host not found !□<7>working=%x last_cmd=%x □ quhdu=%x quendu=%x □□□ r%2x=%2x□□ r1c=%2x□□□ r1f=%2x in_snd=%2x □□□ r20=%2x□□□ r22=%2x□□□ r3a=%2x
□ que cdb= %2x □□ last_lenu= %x dev_lcmd= %x □Reset bus host not found !□ACARD AEC-6710/6712 PCI Ultra/W SCSI-3 Adapter Driver V2.3+ac □Can't find adapter for host number %d
□ACARD AEC-671X Driver Version: 2.3+ac
□□□Adapter Configuration:
Base IO: %#.4lx
IRQ: %d
atp870u: bad scsi host passed.
□□□□□□□□□□□□Copyright (C) 1996-98□□by Initio Corporation□□INI-9X00U/UW□□□v1.03g□INI9100U□□□□□□□□□□□□□□□□J□□□i91u: i91u_setup called twice.
□□□□…óﾕô…óﾖ…óﾖ□…óﾖ□…óﾖ$…óﾖ0…óﾖ<…óﾖH…óﾛｬ…óﾛ …óﾛｸ…óﾚø…óﾛｸ…óﾛｸ…óﾛ0…óﾛ□…óﾞｨ…óﾞ…óﾞｴ…óﾞD…óﾞｴ…óﾞｴ…óﾞd…óﾞP…óêｨ…ó齔…ó龕…ó龕…óê(…óêﾔ…óêﾔ…ó鵐…ó龕…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…óêﾔ…ó龕Copyright (C) 1998-99□□by Initio Corporation□□INI-A100U2Wv1.02a□INIA100inia100: inia100_setup called twice.
□…ô^ð…ô_ …ôjä…ôjä…ôa@…ôjä…ôjä…ôjä…ôjä…ôjä…ôjä…ôjä…ôjä…ôjä…ôjä…ôjä…ôjä…ô_ …ôjä…ôjä…ôa<<6>(scsi%d:%d:%d:%d) Received pre-emptive SDTR message from target.
□□□<6>(scsi%d:%d:%d:%d) Requesting %d bit transfers, rejecting.
□□<6>(scsi%d:%d:%d:%d) Received pre-emptive WDTR message from target.
□□□about to arb, intr/exc/err/fc=%.8x□busy b4 arb, intr/exc/err/fc=%.8x□□intr b4 arb, intr/exc/err/fc=%.8x□□intr after disresel, intr/exc/err/fc=%.8x□□after intr after disresel, intr/exc/err/fc=%.8xafter arb, intr/exc/err/fc=%.8xresel? after arb, intr/exc/err/fc=%.8x□tried reset after arb, intr/exc/err/fc=%.8x<3>mesh: controller not responding to reselection!
<6>mesh: target %d now asynchronous
□□□<6>mesh: target %d synchronous at %d.%d MB/s
□□start_phase nmo/exc/fc/seq = %.8x□□<3>mesh: msg_out but n_msgout=%d
□□<4>mesh: sending %d msg bytes:□□□msgout msg=%.8xbus0 was %.2x explictly asserting ATN□□hace: after explicit ATN bus0=%.2x□<3>mesh bug: start_phase msgphase=%d
□□enbresel intr/exc/err/fc=%.8x□□<3>mesh: start_phase called with phase=%d
□□□□□□□□□…õYﾜ…õYø…õZ…õ[d…õ[…õ[慶md_complete fc=%x□last_mbyte err/exc/fc/cl=%.8x□□<3>mesh: error %x in msg_out
□□<3>mesh: exc %x in msg_out
<4>mesh: bs0=%x in msg_out
<3>mesh: interrupt in idle phase?
□Selecting phase at command completion□□impatient for req□□<4>mesh: status is %x
□□□□□…õ^…õ¥ｨ…õ[l…õ^X…õ[|…õ¥H□□□□□□□…õ^…õ`…õ^､…õ`…õ_ð…õ`(…õ`l…õ`|phasemm ch/cl/seq/fc=%.8x□□<4>mesh: no msg to repeat
□<4>mesh: unknown scsi phase %x
□□□□□□□□…õb…õaä…õb(…õb4…õbｰ…õbｰ…õbT…õb@<3>mesh: reselected in phase %d/%d tgt %d
□extra resel err/exc/fc = %.6x□□<3>mesh: reselection but nothing in fifo?
□reseldata %x□□□<3>mesh: bad reselection data %x
□□<4>mesh: reselected by target %d
□□<4>mesh: saved_ptr=%x goes_out=%d cmd=%p
□□<3>mesh: reselected by tgt %d but no cmd!
□resel prev tgt=%d□□resel err/exc=%.4x□abort□□error err/exc/fc/cl=%.8x□□□<6>mesh: SCSI bus reset detected: waiting for end...□□□done
□□<4>mesh: target %d aborted
<3>mesh: msg parity error, target %d
□□<3>mesh: parity error, target %d
□□<3>mesh: sequence error (err=%x exc=%x)
□□□<3>mesh: unknown error %x (exc=%x)
<4>mesh: lost arbitration
□<3>mesh: can't cope with exception %x
□interrupt intr/err/exc/seq=%.8x<4>got %d message bytes:□□□msgin msg=%.8x□<4>mesh: lun mismatch (%d != %d) on reselection from target %d
<4>mesh: rejecting message from target %d:□□□□□□□□□…õkﾀ…õiｨ…õjﾌ…õjﾘ…õjä…õk□…õkﾀ…õjð…õkﾀ<4>mesh_done: result = %x, data_ptr=%d, buflen=%d
□<4>buffer = %x %x %x %x %x %x %x %x
□□□mesh: scatterlist element >= 64k□□□mesh: transfer size >= 64k□halt_dma fc/count=%.6x□data_ptr %x<3>mesh: halt_dma: data_ptr=%d (nb=%d, ms=%p)
□□□setsyncsettagssetorder□□□setverbose□setwidesetdebug□□□setflagallsimple□ordereddefaultalloc□□phase□□queue□□result□scattertiny□□□timing□nego□□□tags□□□trace□□no_disc□□□□□□□□…õｼ@…õｼ@…õｽ□…õｼx…õｼ@…õｾﾐ…õｿP…õｼ@ Chip NCR53C%s, device id 0x%x, revision id 0x%x
□ On PCI bus %d, device %d, function %d, IRQ %d
□□□ Synchronous period factor %d, max commands per lun %d
□□I#%d□□□%s:%d: No MSG OUT phase after selection with ATN.
□%s:%d: message %x sent on bad reselection.
M_REJECT to send for □□modify DP□□ign wide residue□□□M_REJECT received (%x:%x).
WEIRD message received□□□□□□□□□□□□□…ö□ﾄ…ö□…ö□ﾜ…ö□x…ö□､…ö□ｴ…ö□…ö□à…ö□…ö□0…ö□ｴ…ö□ｴ…ö□□…ö□…ö□□…ö□$…ö□…ö□0…ö□¥…ö□…ö□ﾄ…ö□`…ö□ｬccb @%p using tag %d.
pci□□□□□□□□□□□□<7>adb devices: [%d]: %d %x□□□□□<4>Warning: no ADB interface detected
□<3>Two handlers for ADB device %d
□<6>adb packet: %x, id = %d
□adb<3>adb: unable to get major %d
□□□□□□□□□□□□via-cuda□□□<4>Warning: only using 1st via-cuda
□□□<3>via-cuda: expecting 1 address (%d) and 1 interrupt (%d)
<3>init_via failed
VIA<3>VIA: can't get irq %d
□□Timeout waiting for CUDA response to sync□□Timeout waiting for CUDA response to sync (2)□□Timeout waiting for CUDA response to sync (3)□□Timeout waiting for CUDA response to sync (4)□□cuda: state=idle, status=%x
□□□cuda: state=awaiting_reply, status=%x
□cuda: state=sent_first_byte status=%x
□cuda: state=reading status=%x
□via_interrupt: unknown cuda_state %d?
□□□□□□□□□…öﾕH…öﾕð…öﾖ …öﾗl…öﾗì…öﾕdata from cuda (%d bytes):□ %.2x□□□□adbchrp,adb0□□ADB<3>ADB: can't get irq %d
□□Core99□1999 PowerBook G3□□PowerBook G3 SeriesPowerBook 2400/3400/3500(G3)□□□Unknown PowerBook□□via-pmu<4>Warning: only using 1st via-pmu
<3>via-pmu: %d addresses, %d interrupts!
□□ohare□□paddington□heathrow□□□Keylargo□□□adbgpio□□□extint-gpio1□□□<6>PMU driver initialized for %s
□□VIA-PMU<3>VIA-PMU: can't get irq %d
□□GPIO1/ADB□□<3>pmu: can't get irq %d (GPIO1)
□□pmu<3>init_pmu: no response from PMU
□<3>init_pmu: timed out acking intrs
□□□<3>pmu_adb_reset_bus: pmu_queue_request failed
<3>pmu_request: bad nbytes (%d)
□□□<3>PMU not responding (!ack)
□□<7>PMU: stuck in intr loop, intr=%x pmu_state=%d
□□<3>PMU: spurious SR intr (%x)
□<3>PMU: bad reply len %d
□□<3>via_pmu_interrupt: unknown state %d?
□□□<3>PMU: extra ADB reply
□□□<7>sleep %d rejected by %p (%p)
□□□pmu: sleep rejected
□□□pmu: sleep failed
□□□□□media-bay□□keylargo-media-bay□mac-io□<3>Pismo media-bay has no mac-io parent !
□<6>Registered %d media-bay(s)
□<6>media bay %d contains a CD-ROM drive
□□□<6>media bay %d contains a floppy disk drive
□□<6>media bay %d contains an unknown device (%d)
□□□<7>Registered ide %d for media bay %d
□<7>Timeount waiting IDE in bay %d
□IDE register error
<7>media-bay %d is ide %d
□IDE Timeout in bay %d !
□□<7>Unregistering mb %d ide, index:%d
□□media-bay %d, IDE device badly inserted or unrecognised
□□…öêà…öë…öë …öëh…öë|…öìﾐ…öìd<6>media bay %d is empty
□□rs_flush_chars□rs_write□□□rs_write_room□□rs_chars_in_buffer□rs_flush_bufferrs_throttlers_unthrottle□□rs_break□□□rs_ioctl□□□□□□□□□□□□□□□…÷>□…÷> …÷> …÷> …÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>,…÷><…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>ｬ…÷>¥…÷>Lrs_close□□□rs_close: bad serial port count; tty->count is 1, info->count is %d
□□rs_hangup□□rs_openPowerMac Z8530 serial driver version 2.0
□□cobalt□infrared□□□slot-names□IrDA□□□Modem□□escc□□□Sorry, can't use %s: no more channels
□<4>SCC: Only 2 channels per chip are supported
Can't use %s: %d addrs %d intrs
□□□via-pmuSCC-txdma□□<3>macserial: can't get irq %d
SCC-rxdma□□SCCmacserial□□ttyS□□□cuaCouldn't register serial driver
□□□Couldn't register callout driver
□□macserial: console line, enabling interrupt %d
macserial: console not supported yet !□ttyS%01d at 0x%08x (irq = %d)□□ is a Z8530 ESCC□□□, port = %s (internal modem)□□□□□□nvram□□<6>Macintosh non-volatile memory driver v%s
□□ADB keyboard on ID %d:%d.%02x□□<6>Detected ADB keyboard, type <unknown>.
ANSI.
□ISO, swapping keys.
□□□JIS.
□□ADB mouse on ID %d:%d.%02x□ADB adjustable keyboard buttons on ID %d:%d.%02x□□□ADB Powerbook buttons on ID %d:%d.%02x□<6>Trying to register unknown ADB device to input layer.
□□<6>input%d: ADB HID on ID %d:%d.%02x
□□□□□□□□□□…÷[à…÷[à…÷[à…÷¥□…÷¥□…÷[à…÷¥□…÷[à…÷¥□…÷[ｼ…÷[ｼ…÷[à…÷¥□…÷[ｼ…÷[ｼ…÷[à…÷¥□…÷¥P…÷[ｼ…÷¥□…÷¥P…÷¥P…÷¥P…÷[à…÷¥□…÷¥P…÷[à…÷[à…÷¥□…÷¥P…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[ｼ…÷[à…÷¥□…÷¥P…÷[à…÷¥□…÷¥P…÷[à…÷¥□…÷¥P…÷¥PADB keyboard at %d, handler set to 3
□□ADB keyboard at %d, handler 1
□ADB mouse at %d, handler set to 4□□ADB mouse at %d, handler set to 0x2F□□□ADB mouse at %d, handler set to 0x42□□□ADB mouse at %d, handler set to 0x66□□□ADB mouse at %d, handler set to 0x5F□□□ADB mouse at %d, handler set to 3□□ADB mouse at %d, handler set to 2□□ADB mouse at %d, handler 1□ADB MacAlly 2-button mouse at %d, handler set to 0x42□□□ (trackpad)bad length for reg. 1
□ (trackman/mouseman)□□□ (TurboMouse 5) (Microspeed/MacPoint or compatible)□□□ (Mouse Systems A3 Mouse, or compatible)□□□mouse_button3_keycode□□mouse_button2_keycode□□mouse_button_emulation□keyboard_lock_keycodes□keyboard_sends_linux_keycodes□□mac_hiddev<6>keyboard: unknown e1 escape sequence
□□□<6>keyboard: unknown scancode e0 %02x
□Macintosh mouse button emulation□□□<6>input%d: Macintosh mouse button emulation
□□□□□□□□□□□□□□frame buffer device<3>fbcon_setup: No support for fontwidth %d
□□□<4>fbcon_setup: type %d (aux %d, depth %d) not supported
□□Warnning, changing not active console
□fbcon_redraw_bmove width sy != dy□□□□□□controlfb□□platinumfb□valkyriefb□matrox□imsttfbaty128fb□□□atyfb□□offb□□□pm2fb□□%d %s
□fb%d□□□□□□□□□□□…÷ｷ…÷ｷè…÷ｸｨ…÷ｼ¥…÷ｹt…÷ｹ□…÷ｹﾜ…÷ｼ¥…÷ｼ¥…÷ｼ¥…÷ｼ¥…÷ｼ¥…÷ｼ¥…÷ｼ¥…÷ｼ¥…÷ｺｨ…÷ｻ¥…÷ｼ4fb□unable to get major %d for fb devs
□□□<3>platinum_var_to_par, not enough ram for vmode %d, cmode %d.
,□□font:□□vmode:□cmode:□□□□□□□□□□□□□□□□(□□(ｬ□□(ｬ□□(ｬ□□(ｬ□□(ｬ□□(ｬ□□(ｬ□□(□□(ｬ□□(ｬ□□(ｬ□□(ｬ□□(ｬ□□(ｬ□□(□□(□□(ｬ□□(ｬ□□(ｬ□□(ｬ□□(ｬ□□(ｬ□□(ｬ□□( □□(ｬ□□(ｬ□□(ｬ□□(ｬ□□(ｬ□□(ｬ□□(ｬ□□( □□□□□□□□□□□Monitor sense value = 0x%x, □□□using video mode %d and color mode %d.
<3>valkyriefb: can't set default video mode
□□□fb%d: valkyrie frame buffer device
valkyrie: display mode %d not supportedvalkyrie□□□expecting 1 address for valkyrie (got %d)□□<3>valkyrie_var_to_par: mac_var_to_vmode unsuccessful.
<3>valkyrie_var_to_par: var->xres = %d
<3>valkyrie_var_to_par: var->yres = %d
<3>valkyrie_var_to_par: var->xres_virtual = %d
<3>valkyrie_var_to_par: var->yres_virtual = %d
<3>valkyrie_var_to_par: var->bits_per_pixel = %d
□□<3>valkyrie_var_to_par: var->pixclock = %d
<3>valkyrie_var_to_par: var->vmode = %d
□□□<3>valkyrie_var_to_par: vmode %d not valid.
□□□<3>valkyrie_var_to_par: cmode %d not supported.
□□□<3>valkyrie_var_to_par: vmode %d does not support cmode %d.
□□□<3>valkyrie_var_to_par: not enough ram for vmode %d, cmode %d.
<3>Scroll mode not YREDRAW in valkyrie_par_to_display
□,□□font:□□vmode:□cmode:□noblankblank□□□□□□□□□□displayoffscreen-display□□ATY,□□□AAPL,address□□□ATY,264LTPro□□□ATY,RageM3p<6>MacOS display is %s
MacOS display□□ATY,Rage128ATY,RageM3p1□□□ATY,RageM3pA□□□ATY,RageM3pB□□□ATYIMS,tt□chips65550□MTRX□□□controlvalkyrie□□□platinum□□□depth□□width□□height□linebytes□□addressno framebuffer address found for %s
□□□<6>Using unsupported %dx%d %s at %lx, depth=%d, pitch=%d
□□%s: can't use depth = %d
□□OFfb □□ATY,Rage6□□fb%d: Open Firmware frame buffer device on %s
□□□□□□□□□□*+8:>@ABC□□□□□□□…………□□□⇥ □□?□□□□……□<3>matroxfb: aiee, SYSPLL not locked
□□<3>matroxfb: Pixel PLL not locked after 5 secs
□□□□…ù:<…ù:ð…ù:ð…ù:ð…ù:P…ù:ð…ù:ð…ù:ð…ù:ð…ù:ð…ù:ð…ù:ð…ù:|…ù:ð…ù:ð…ù:ð…ù:ð…ù:ð…ù:ð…ù:ð…ù:ｴ…ù:ð…ù:ð…ù:ð…ù:ð…ù:ð…ù:ð…ù:ð…ù:ﾐ□□□□□□□□□□□…ù;ｼ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ﾄ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ｼ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ｼ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ﾌ…ù;ｼ□□□□□□□□□□□…ù;…ù;､…ù;､…ù;､…ù;､…ù;､…ù;､…ù;､…ù;ｬ…ù;､…ù;､…ù;､…ù;､…ù;､…ù;､…ù;､…ù;ｬ…ù;､…ù;､…ù;､…ù;､…ù;､…ù;､…ù;､…ù;ｬ…ù;､…ù;､…ù;､…ù;､…ù;､…ù;､…ù;､…ù;ｬ<3>matroxfb: Temporary pixel PLL not locked after 5 secs
□□<3>matroxfb: Memory PLL not locked after 5 secs
□□□□□□□□□□□\□□□□□□□ □□□@□□□ﾀ□□□□□□□\□□□□□□□@□□□\□□□\□□□□□□□<3>matroxfb: Pixel PLL%c not locked after usual time
□□□□□□□□□□\□□□□□□□ □□□@□□□ﾀ□□□□□□□\□□□□□□□@□□□\□□□\□□□□□□□□□□□…ù@ …ùA…ùA…ùA…ùA…ùA…ùA…ùA…ù@ …ùA…ùA…ùA…ùA…ùA…ùA…ùA…ù@ä…ùA…ùA…ùA…ùA…ùA…ùA…ùA…ùA(…ùA…ùA…ùA…ùA…ùA…ùA…ùA…ùAL<3>matroxfb: Loop PLL not locked after 5 secs
□MATROX□,□□dev:□□□depth:□<3>matroxfb: unsupported color depth
□chips65550□□□□□…ùU…ùW□…ùV4…ùXP…ùXP…ùXP…ùXP…ùXP…ùXP…ùXP…ùXP…ùXP…ùXP…ùXP…ùXP…ùXP…ùW8…ùWh…ùXP…ùWﾘ<4>input: ran out of input device numbers!
input□□<3>input: unable to register char major %d□<3>input: can't unregister char major %d□□□□□□□<3>usb.c: error registering %s driver
□<6>usb.c: registered new driver %s
<3>usb.c: null device being purged!!!
□<6>usb.c: deregistering driver %s
□<4>usb.c: too many buses
□□<6>usb.c: new USB bus registered, assigned bus number %d
□□<6>usb.c: USB bus %d deregistered
□<3>usb.c: null device being checked!!!
<3>usb.c: bad find_interface_driver params
<4>usb.c: USB device %d (vend/prod 0x%x/0x%x) is not claimed by any active driver.
<3>usb.c: alloc_urb: kmalloc failed
□□□usb_control/bulk_msg: timeout
□<3>usb.c: ran out of descriptors parsing
□□<4>usb.c: unexpected descriptor 0x%X, expecting endpoint descriptor, type 0x%X
<3>usb.c: invalid descriptor length of %d
□<3>usb.c: couldn't allocate memory for endpoint extra descriptors
□<3>usb.c: couldn't kmalloc interface->altsetting
□□<4>usb.c: too many alternate settings (max %d)
<3>usb.c: couldn't allocate memory for interface extra descriptors
<4>usb.c: too many endpoints
□□<3>usb.c: out of memory
□□□<4>usb.c: too many interfaces
□<3>usb.c: couldn't allocate memory for config extra descriptors
□□□%x□USB %s Root Hub<6>usb.c: USB disconnect on device %d
□remove□<4>usb.c: selecting invalid interface %d
□□<4>usb.c: selecting invalid configuration %d
□□<4>usb.c: too many configurations
□<4>usb.c: not enough configurations
□□□<3>usb.c: unable to get descriptor
<3>usb.c: config descriptor too short (expected %i, got %i)
□□□<3>usb.c: unable to allocate memory for configuration descriptors
□□□USB HID %s %04x:%04x□□□%s %s□□<6>input%d: USB HID v%x.%02x %s [%s]□□ [%04x:%04x]□□□ on usb%d:%d.%d
□□□hid□□□□□□□□<3>hub.c: Unable to get hub descriptor (err = %d)
□<3>hub.c: Unable to kmalloc %d bytes for bitmap
□□□<6>hub.c: %d port%s detected
□□□□□□s□□<3>hub.c: Unable to get hub status (err = %d)
□<3>hub.c: Device is hub class, but has output endpoint?
□□□<3>hub.c: Device is hub class, but has endpoint other than interrupt?
□<6>hub.c: USB hub found
□□□<3>hub.c: couldn't kmalloc hub struct
□<3>hub.c: couldn't allocate interrupt urb
□<3>hub.c: usb_submit_urb failed (%d)
□□<3>hub.c: get_port_status(%d) failed (err = %d)
□□□<3>hub.c: Cannot enable port %i after %i retries, disabling port.
□<3>hub.c: Maybe the USB cable is bad?
□<3>hub.c: couldn't allocate usb_device
<3>hub.c: get_port_status failed
□□<3>hub.c: already running port %i disabled by hub (EMI?), re-enabling...
□□<3>hub.c: port %d over-current change
□<3>hub.c: get_hub_status failed
□□□khubd□□hub<3>hub.c: Unable to register USB hub driver
□□□<3>hub.c: giving up on killing khubd
□□<3>hub.c: attempting to reset root hub!
□□□<3>hub.c: USB device not accepting new address (error=%d)
□<3>hub.c: unable to get device descriptor (error=%d)
□□<3>hub.c: USB device descriptor short read (expected %i, got %i)
□□<3>hub.c: unable to get configuration (error=%d)
□□<3>hub.c: failed to set active configuration (error=%d)
□□□<3>hub.c: failed to set active alternate setting for interface %d (error=%d)
□□driversdevices<3>usbdevfs: cannot create inode for bus %u device %u
□<3>usbdevfs: cannot create inode for bus %u
□□□.□□..□%03d□□□,□□devuid□devgid□devmodebusuid□busgid□busmodelistuidlistgidlistmode□□□usbdevfs_read_super: get root inode failed
<4>usbdevfs: mount parameter error
usbdevfs□□□usb<3>%s: irq%d happened with irq_func NULL with %s as cad!
□□<3>joydev: no more free joydev devices
js%d□□□<6>js%d: Joystick device for input%d
□□<4>keyboard.c: can't emulate rawmode for keycode %d
□□□<6>keybdev.c: Adding keyboard: input%d
<6>keybdev.c: Removing keyboard: input%d
□□…ú､ｬ…ú､ﾄ…ú､ﾜ…ú､ﾌ…ú､ｴ…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú､ｬ…ú､ﾄ…ú､ﾜ…ú､ﾌ…ú､ｴ…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú･T…ú､ｬ…ú､ﾄ…ú､ﾜ<3>mousedev: no more free mousedev devices
mouse%d<6>mouse%d: PS/2 mouse device for input%d
□mice□□□<6>mice: PS/2 mouse device common for all mice
<3>usb-ohci.c: internal OHCI error: TD index > length
□OHCI□□□□□□□□□□□□□□□…úﾖｼ…úﾖﾔ…úﾚ\…úﾚ\…úﾚ\…úﾚ\…úﾚ\…úﾖì…úﾚ\…úﾚ\…úﾚ\…úﾚ\…úﾚ\…úﾚ\…úﾚ\…úﾗ□…úﾗ□…úﾗ4…úﾗL…úﾗd<3>usb-ohci.c: USB HC TakeOver failed!
□□□□□□usb-storageusb<7>usb-storage.c: new MODE_SENSE_6 data = %.2X %.2X %.2X %.2X
□SCSI emulation for USB Mass Storage devicesusb-storage-%d□<2>usb-storage: bus_reset() requested but not implemented
□<2>usb-storage: host_reset() requested but not implemented
Host scsi%d: usb-storage
□□□⇥Vendor: %s
□□□ Product: %s
□Serial Number: %s
□ Protocol: %s
□ Transport: %s
□⇥ GUID: %08x%08x%08x
□□□□□Sony DSC□□□RATOCSystems,Inc. USB Compact Flash AdapterMicrotech USB-SCSI-HD50Sandisk Imagemate (SDDR-31)Sandisk ImageMate (SDDR-01)Hagiwara FlashGate SmartMedia□□TEAC CD-210PU□□Iomega Zip 100□Iomega USB Zip 250□Iomega USB Zip 100□Iomega Zip 250□Y-E Data Flashbuster-U□Shuttle eUSB MMC Adapter□□□Shuttle eUSCSI Bridge□□Matshita LS-120HP USB CD-Writer Plus□□0□□<4>usb-storage.c: Out of memory
□□□UnknownNone□□□Control/Bulk□□□Control/Bulk/Interrupt□Bulk□□□Reduced Block Commands (RBC)□□□8020i□□QIC-1578070i□□Transparent SCSI□□□Uniform Floppy Interface (UFI)□<4>usb-storage.c: Unable to start control thread
□□<7>WARNING: USB Mass Storage data integrity not assured
