Data aktualizacji: 01.05.1999

Information on the displays

back next contents

Display 1: Information of the serving cell

If mobile is on TCH (Traffic channel) e.g. during call or location update, display 1 offers following information:

++++++++++++++

+abbb ccc ddd+

+ e ff g mmmm+

+nnn      ppp+

+    oooo    +

++++++++++++++

Where:

• a --- H, if carrier numbers are scrolled when hopping is on. Otherwise " ".
• bbb --- when mobile is on TCH:
             DCH carrier number in decimal.
       when mobile is NOT in TCH:
             CH carrier number in decimal.
• ccc --- RX level in dBm
• ddd --- TX power level. If transmitter is on, symbol * is shown in front of the power level value
• e --- Time Slot, range is 0 - 7
• ff --- Timing advance, range is 0 - 63
• g --- RX quality (sub), range is 0 - 7
• mmmm --- Radio Link Timeout value. If value is negative, 0 is shown. Maximum value is 64. When mobile is NOT on TCH then xx is shown.
• nnn --- Value of the path loss criterion (C1). Range is -99 to 99.
• oooo --- Type of current channel:
             THR0: TCH HR subchannel 0
             THR1: TCH HR subchannel 1
             TFR: TCH FR
             TEFR: TCH EFR
             F144: TCH FR data channel, speed 14.4 kbps
             F96: TCH FR data channel, speed 9.6 kbps
             F72: TCH FR data channel, speed 7.2 kbps
             F48: TCH FR data channel, speed 4.8 kbps
             F24: TCH FR data channel, speed 2.4 kbps
             H480: TCH FR data channel, speed 4.8 kbps, subch 0
             H481: TCH FR data channel, speed 4.8 kbps, subch 1
             H240: TCH FR data channel, speed 2.4 kbps, subch 0
             H241: TCH FR data channel, speed 2.4 kbps, subch 1
             FA: TCH FR signalling only (FACCH) channel
             FAH0: TCH FR signalling only (FACCH) channel, subch 0
             FAH1: TCH FR signalling only (FACCH) channel, subch 1
             SDCH: SDCCH
             AGCH: AGCH
             CCCH: CCCH
             CCHR: CCCH and cell broadcast receiving on
             BCCH: BCCH
             SEAR: SEARCH
             NSPS: MS is in No Serv Power Save state
• ppp --- Value of the cell reselection criterion (C2). Range is -99 till 99. If phone is phase 1 then C1 value is shown.

back next contents