Use this table to access the appropriate device driver and driver installation document for your operating system or systems. Optionally, you can refer to the Installation Overview for installation procedures.

Device Driver

Documentation

FreeBSD 5

(32-bit)

v1.01

See the readme file with the driver assembly.

FreeBSD 6

(32-bit)

v1.01

See the readme file with the driver assembly.

Linux®

2.6.4 through 3.13.6. kernels

(32/64-bit)

v2.04

Refer to the readme file bundled with the driver for installation procedures. You can also download LCOM, which can be used for testing serial ports on a Linux system.

QNX® 6

(32-bit)

v6.32D

See the readme file with the driver assembly.

Make sure that the file extension is an uppercase F. Some browsers download the file with a lowercase f file extension, if that occurs; change the file extension to uppercase before installing the driver.

SCO® OpenServer™ 5

(32-bit)

v1.01

See the readme file with the driver assembly.

SCO OpenServer 6

(32-bit)

v1.01

See the readme file with the driver assembly.

Windows

(32/64-bit)

Select the appropriate operating system

v4.10

To install the device driver, execute the .exe file and follow the installation wizared. See the RocketPort EXPRESS SMPTE Device Driver Installation Guide for Windows for detailed driver installation procedures and COM port configuration.

If your application is receiving high throughput streaming data, leave the Use Fast (Low Latency) Data Transfer option unselected, is the default setting used by most applications.

If your application requires a fast response from the serial connected device, set the Use Fast (Low Latency) Data Transfer option in the Comtrol Drivers Management Console.

Note
Although the Port Setup tab for each COM port displays the RS mode as 232; the RocketPort EXPRESS SMPTE adapter is set for RS-422 operation only.

	07/18/14	Home \| Comtrol Support
	Copyright © 2014 Comtrol Corporation.