![]() | ![]() |
|
![]() |
|
Verify that your PC is connected and has access to the network.
If you have not done so, connect an available Ethernet cable from your network hub to the DeviceMaster FreeWire and verify that the DeviceMaster FreeWire is powered on.
To operate on an 802.11b/g network, you must set up the same configuration as the wireless network you want the DeviceMaster FreeWire to communicate on. All nodes of a wireless network need to have the same settings in order to communicate with each other.
Wireless mode (ad-hoc or infrastructure)
SSID channel
Data rate
Security settings (WEP keys, 802.1x settings, etc.)
From the host computer, open a standard web browser, enter the IP address of the DeviceMaster FreeWire into the address bar of the web browser, and then press Enter.
The Web Browser Utility screen displays.
Click the Login menu selection (left), enter the password (default is ACCESS), and then click Submit.
Use the web page to configure the settings of the DeviceMaster FreeWire. The menu selections are displayed on the left side of the screen, and the individual settings are located at the top of the screen. At a minimum, you need to configure the following pages:
I/O Port, if you are using the serial port in socket mode.
TCP/IP - to configure the DeviceMaster FreeWire IP address for your network.
Wireless - to configure the wireless settings that match your network.
Admin - you may want to configure network access password and an update password, which prevents unauthorized configuration changes.
To confirm wireless operation:
Close the web browser and disconnect the Ethernet cable.
Re-open the web browser, enter the IP address, and verify that DeviceMaster FreeWire web page loads.
![]() |
|
If the web page does not load, see Troubleshooting page or the DeviceMaster FreeWire Installation and User Guide Troubleshooting section.
You are ready to connect the serial device to the DeviceMaster FreeWire. Refer to the Connecting the Serial Device section in the DeviceMaster FreeWire Installation and User Guide for serial port pinout information.
![]() |
![]() | 06/11/14 | Home | Comtrol Support | ![]() | |
![]() | Copyright © 2014 Comtrol Corporation. | ![]() |