| From: | Michael Merkel |
| Date: | 2 Jan 2000 at 16:19:38 |
| Subject: | Re: Re: installing "reactor" gui builder from the developer cd |
From: "Michael Merkel" <Michael.Merkel@gmx.net>
<sembazuru@crosswinds.net> wrote at Sun, 02 Jan 2000 09:55:24 -0500
about <[amigaOS3_5] Re: installing "reactor" gui builder from the developer cd>:
> From: Chris Elliott <sembazuru@crosswinds.net>
>
> Hello Michael Merkel
>
> On 01-Jan-00, Michael Merkel wrote:
> MM> From: "Michael Merkel" <Michael.Merkel@gmx.net>
> [...]
> MM> problem:
> MM> if i install reactor gui builder (by just copying the while directory
> MM> to harddisk) to a partition with pfs3 installed on it it does simply
> MM> not start!
> MM> the same on a ffs partition works very well.
>
> I don't have the os3.5 dev cd, but noticed a similar (mebby) problem
> with Photogenics. After a lot of head scratching and repeated resets,
> I finally found my problem. It seems that some of the files (I think
> the ones with large names...) lost their read protection bit when
> copied. (The only protection bit set was delete...) Check to see that
> all the protection bits are set correctly, or just do a mass of
> "protect #? rwed" then "protect #?#/?" rwed and keep adding "#?/"s to
> the beginning of the filespec there until you reach the full depth of
> the directory tree.
it is not that similar ;-)
as written it works on a ffs partition but not on pfs3. the protection
bits are always the same (rwed are set). when copying from the pfs3
partition to the ffs one the ffs one works but the pfs3 one not...
arghl! reactor is the only program here which has this behavior 8-(
byebye...
--------------------------- ONElist Sponsor ----------------------------
Independent contractors: Find your next project gig through JobSwarm!
You can even make money by referring friends.
<a href=" http://clickme.onelist.com/ad/jobswarm2 ">Click Here</a>
------------------------------------------------------------------------