Shareware Overload/ShartewareOverload.cdr/wp/pcw303a.zip/INSTALL.DOC

Text File | 1989-09-25 | 6KB | 130 lines

Making a Working Diskette or Directory Without WORKDISK

If you must use DOS 3.0, it has a bug that makes the WORKDISK program not work.
You may also not have enough "environment" memory to use the WORKDISK command.
But you can still make a working diskette or directory manually.

To make a working diskette or directory manually:

1. Place the PC-Write Program diskette in drive A. Type "A:" and press Enter.

2. To place your registration number on the front screen, type this command:
       ED =  <Enter>   (make sure there is a space between ED and =)

3. For a floppy disk system, make two blank formatted diskettes (if you have
   the smaller 3.5 inch diskettes, you only need one), called the working
   diskette and the extra diskette. Place the working diskette in drive B.
   Type "B:" and press Enter.

   For a hard disk system, first you need to make your hard disk the default
   drive (usually, you type "C:"). Then use the MKDIR command to create a
   working directory (for example, MKDIR \PCW). Then use the CHDIR command to
   make it the current directory (for example, CHDIR \PCW).

4. At the DOS prompt, type the following commands:
       COPY  A:ED.EXE  <Enter>
       COPY  A:ED.HLP  <Enter>
       COPY  A:ED.DEF  <Enter>

5. If you have a Tandy 1000 with the old keyboard, type the following command:
       COPY  A:ED.TRS  ED.DEF  <Enter>

6. If you have a color monitor and want to edit in color, type the following:
       ECHO  %C  >>  ED.DEF  <Enter>

7. To get the three Reminder lines at the top of the screen by default, type:
       ECHO  %M  >>  ED.DEF  <Enter>

8. If you want an automatic file save every five minutes, type the following:
       ECHO  %R] &R:5  >>  ED.DEF  <Enter>

9. Place the PC-Write Utility diskette in drive A.

10. If you use Windows, DesqView, or a program that needs a PIF file, type:
       COPY A:ED.PIF  <Enter>

11. The next steps show how to make a PR.DEF file for your printer with the
    Printer Picker.

12. If you have a laser printer, skip to step 18.

13. If you have an HP DeskJet with soft fonts, type the following command:
        COPY  A:DESKDOWN.BAT  <Enter>

14. Make drive A the default drive (type "A:" and press Enter).

15. If you have a hard disk system, skip to step 17.

16. You have a floppy disk system and a non-laser printer.
    Type the following then skip to step 25.
       MENUPRT  B:PR.DEF  <Enter>

17. You have a hard disk system but not a laser printer. Type the following
    command, where "c:\pcw" is your working directory, then skip to step 25.
       MENUPRT  c:\pcw\PR.DEF  <Enter>

18. You have a laser printer. If you have an HP LaserJet with soft fonts,
    type this command:
       COPY  A:HPDOWN.BAT   <Enter>

19. If you have a Quadram QuadLaser with soft fonts, type the following:
       COPY  A:QUADDOWN.BAT  <Enter>

20. If you have a printer using Adobe PostScript, type the following commands:
       COPY  A:PSDOWN.INI  PR.INI  <Enter>
       COPY  A:PSDOWN.FIN  PR.FIN  <Enter>

21. Make drive A the default drive (type "A:" and press Enter).

22. If you have a hard disk system, skip to step 24.

23. You have a floppy disk system and a laser printer. Your print control file
    probably won't fit on your working diskette (unless you have 3.5 inch
    diskettes), so replace the working diskette in drive B with the extra
    diskette. Type the following command, then skip to step 25.
       MENULAZ  B:PR.DEF  <Enter>

24. You have a hard disk system and a laser printer. Type the following, where
    "c:\pcw" is your working directory, and continue with step 25.
       MENULAZ  c:\pcw\PR.DEF  <Enter>

25. Make your working diskette (B:) or directory the default again.

26. Place the PC-Write Reference Diskette in drive A.

27. The master word list is a large (110 KB) file used to check spelling. Your
    computer must have at least 448 KB RAM to use this master word list. Also,
    the PC-Write program and word list file won't fit on one diskette (unless
    you have 3.5 inch diskettes). If you have a floppy disk system, first
    insert your extra disk in drive B. Then type the following command:
       COPY  A:WORDS.MAS  <Enter>

28. Smaller Help files for beginners and advanced users are available. If you
    choose a small Help file, the main Help file won't be available. If you
    want the normal full Help file, installation is complete.

29. To get one of the smaller Help files, if you have a floppy disk system,
    place the working diskette (not the extra diskette) in drive B.

30. To get beginner's Help, type the first command below, for advanced Help
    the second command:
       COPY  A:EDBEGIN.HLP  ED.HLP  <Enter>
       COPY  A:EDQUICK.HLP  ED.HLP  <Enter>

You may also want to make backup copies of your diskettes. If you have a less-
than-compatible computer, or a mouse, follow the directions in the manual.

Remarks

If you are copying all the files on the PC-Write diskette to your hard disk to
upgrade from a version of PC-Write earlier than 2.6, delete the MENUPRT.COM
file from the hard disk before you run WORKDISK. If you are upgrading from
versions 2.6, 2.7, or 2.71 delete the file MENUPRT.EXE. You can also delete
the file PR.EXE, used in PC-Write versions before 3.0.

If you are upgrading from a version of PC-Write before 3.0, most of the old
keyboard commands and Dot lines are the same. Page break format has changed,
but repage (Alt F7) or the Alt F3 then F5 command will fix this. However, to
use your old edit control files, you must change many of your old % and &
commands. Key and operation code numbers in macros have not changed.