home *** CD-ROM | disk | FTP | other *** search
/ Shareware Overload / ShartewareOverload.cdr / windows / dswin1.zip / README < prev    next >
Text File  |  1990-05-21  |  6KB  |  170 lines

  1. NetWare DOS/Windows Workstation README file 
  2. For NetWare DOS client v3.01 
  3. May 1990
  4. --------------------------------------------------
  5.  
  6. 1.  The instructions for creating PIF files in the 
  7. NetWare DOS/Windows Workstation Update booklet are 
  8. for the 386 Enhanced Mode.  If you are using other 
  9. modes, check your Windows documentation for instructions 
  10. on how to create a PIF file. 
  11.  
  12.  
  13. 2.  BINDFIX--WARNING:  Do not run the BINDFIX utility 
  14. included in this kit on a NetWare 386 server. 
  15.  
  16.  
  17. 3.  Full IPX/SPX support was not available in Windows v3.0 
  18. at the time of this release.  Applications using IPX/SPX may 
  19. cause network errors if run under Windows v3.0. 
  20.  
  21.  
  22. 4.  For product information, call 1-800-LANKIND.
  23.     For customer service, call 1-800-LANSWER.  (This service is 
  24. provided for a fee.)
  25.  
  26.  
  27. 5.  The INSTALL Utility for NetWare and Windows 3.0
  28.  
  29. You may experience problems if you are running Windows 3.0
  30. in 386 Enhanced Mode with Novell NetWare.  The problem
  31. only occurs with some network adapters configured to use
  32. IRQ 2 or IRQ 9.  The INSTALL utility provided with this kit will
  33. prevent these problems by installing a new file in your
  34. Windows directory.
  35.  
  36. We recommend that you run this installation procedure if
  37. you are using Windows and NetWare on a 80386-based
  38. computer, whether or not your current configuration
  39. displays the problem.  This will ensure that your copy of
  40. Windows will function properly if your configuration is
  41. later changed.
  42.  
  43. Performing this procedure will have no adverse affects on
  44. your system, whether or not it is required.
  45.  
  46. The INSTALL utility may be run against your local Windows 
  47. directory or against your shared Windows directory. 
  48.  
  49. If you are running it against your local Windows directory 
  50. (usually C:\Windows), INSTALL will install a new file for use by 
  51. Windows in 386 enhanced mode.  INSTALL will copy the file VPICDA.386 
  52. to your Windows directory and modify your SYSTEM.INI file to tell 
  53. Windows about the new file. 
  54.                                                                                            
  55. If you are running INSTALL against your shared Windows 
  56. directory, INSTALL will install VPICDA.386 in your shared 
  57. Windows directory.  Your SYSTEM.SRC file will be modified so 
  58. that individual copies of Windows set up from this directory will 
  59. receive SYSTEM.INI files that load this new file. 
  60.  
  61. Perform the following steps to run the installation procedure 
  62.  
  63. a.    Change directories to the location of 
  64.       INSTALL.EXE.  (INSTALL.EXE AND 
  65.       VPICDA.386 are located on the UTILITIES-2 
  66.       diskette.) 
  67.  
  68. b.    Type INSTALL if you are running INSTALL 
  69.       against your Windows directory (already installed on 
  70.       your workstation), 
  71.  
  72.       OR 
  73.  
  74.       Type INSTALL /n if you are running INSTALL 
  75.       against your shared Windows directory. 
  76.  
  77. At this point, the installation procedure notifies you that the 
  78. procedure completed successfully. 
  79.  
  80.  
  81. 6.  The following additional shell configuration option 
  82. is available for IPX: 
  83.  
  84. CONFIG OPTION=number
  85.  
  86. Allows you to override the configuration options 
  87. chosen during the SHGEN or DCONFIG program.  
  88. This parameter does not permanently change the 
  89. IPX file.  It only changes the configurations within 
  90. the workstation RAM.  Use it as a temporary method 
  91. for changing the configurations.  If the configuration 
  92. option must be changed permanently, the IPX file 
  93. should be reconfigured through the SHGEN or 
  94. DCONFIG program. 
  95.  
  96. Default: option set during SHGEN or DCONFIG 
  97.  
  98. 7.  The following additional shell configuration options 
  99. are available for NetBIOS: 
  100.  
  101. COMMANDS=number
  102.  
  103. Replace number with the number of commands that 
  104. NetBIOS uses.  The minimum is 4 commands; 
  105. the maximum is 128 commands. 
  106.  
  107. Default: COMMANDS=12   
  108.  
  109. Note:  NetBIOS currently allocates one send buffer for 
  110. every command buffer allocated.  The number of 
  111. commands and send buffers will equal the 
  112. maximum of these two parameters. 
  113. RETRY COUNT=number 
  114.  
  115. Allows you to specify the number of 
  116. times NetBIOS will transmit a request to establish 
  117. a connection before it times out.  No minimum and no 
  118. maximum.    
  119.  
  120. Default: RETRY COUNT=20  
  121.  
  122. INTERNET=[ON | OFF]  
  123.  
  124. Affects how NetBIOS names are resolved 
  125. to NetWare addresses.  If the internet option is 
  126. specified as ON, name resolution broadcasts are 
  127. forwarded through NetWare bridges through the 
  128. internetwork.  If the internet option is specified as 
  129. OFF, the broadcast will only be sent to stations on 
  130. the local network, and NetBIOS will ignore inbound 
  131. NetBIOS packets from outside the local network. 
  132.  
  133. Default: INTERNET=ON 
  134.  
  135. BROADCAST COUNT=number  
  136.  
  137. NetBIOS broadcasts packets to every station on the 
  138. internetwork while it attempts to register or find a 
  139. NetBIOS name.  It broadcasts the request the 
  140. number of times recommended by the BROADCAST 
  141. COUNT. (Older versions of NetBIOS used RETRY 
  142. COUNT to resolve names.  
  143.  
  144. If the internet option is ON, the default is 4.  If the 
  145. internet option is OFF, the default is 2. 
  146.  
  147. BROADCAST DELAY=number  
  148.  
  149. Allows you to configure the delay 
  150. between each packet that NetBIOS sends out while 
  151. attempting to register or find a NetBIOS name. 
  152.  
  153. NetBIOS waits the amount of time specified by 
  154. BROADCAST DELAY before each retry.   
  155. The delay is specified in milliseconds.   
  156.  
  157. If the internet option is ON, the default broadcast 
  158. delay is 2,000 milliseconds.  If the internet option is 
  159. OFF, the default broadcast delay is 1,000 
  160. milliseconds. The minimum broadcast retry delay is 
  161. 100 milliseconds; the maximum broadcast retry delay 
  162. is 65,535 milliseconds. 
  163.   
  164. Note: NetBIOS attempts to find a name whenever a session 
  165. is established or a datagram is sent.  Names used 
  166. by datagrams are cached where possible, but any 
  167. datagram may require name resolution over the 
  168. internetwork.  This can take BROADCAST COUNT 
  169. and BROADCAST DELAY time to complete.  
  170.