home *** CD-ROM | disk | FTP | other *** search
/ Shareware Overload / ShartewareOverload.cdr / windows / alm103.zip / READ-ME.TXT < prev    next >
Text File  |  1990-12-30  |  6KB  |  120 lines

  1.  
  2.                           Almanac for Windows
  3.                              Version 1.03
  4.                                12/30/90
  5.  
  6.      Changes made to Almanac in version 1.03 are listed at the
  7.      end of this document.
  8.  
  9.      Complete documentation for Almanac is included in the file
  10.      ALMANAC.WRI.  This file has been created for use within
  11.      your Windows WRITE application.  It will be copied into
  12.      your Almanac 'master' directory during installation.
  13.  
  14.      If you are running Windows 3.0 and would like to 'quick'
  15.      start Almanac: (1) place all of the release files onto a
  16.      floppy disk in drive A: (2) select 'Run...' from the
  17.      'File' menu of Program Manager and (3) enter 'A:\ALMSETUP'
  18.      in the edit box.
  19.  
  20.      Almanac MUST be installed using the provided installation
  21.      utility, ALMSETUP.EXE.  Critical directory information is
  22.      initialized in both your Windows environment and Almanac's
  23.      default auto-load module (ALMANAC.ALM) by ALMSETUP.  Please
  24.      refer to Chapter 2 of the ALMANAC.WRI file for more
  25.      information on running ALMSETUP.
  26.  
  27.      The original release of this version of Almanac was created
  28.      at Impact Software in a compressed file, ALM103.ZIP.  The
  29.      Almanac files must be extracted from this compressed format
  30.      using a file decompress utility such as PKUNZIP.  The release
  31.      file was compressed using PKZIP version 1.10 and will produce
  32.      authenticity verification messages if 'unzipped' with PKUNZIP
  33.      version 1.10 (or higher), assuring you of an untampered,
  34.      original release direct from Impact Software.
  35.  
  36.      Software distributors are authorized to duplicate and sell
  37.      media containing this software, PROVIDED THAT ALL FILES
  38.      CONTAINED IN THIS PACKAGE ARE INCLUDED WITHOUT ALTERATION
  39.      and that the price of such sale is determined by and advertised
  40.      as covering ONLY the cost of the software distribution.
  41.  
  42.      If you feel that you have obtained a copy of this software
  43.      which has been distributed without compliance to the preceding
  44.      paragraph, please contact Impact Software in Chino, California
  45.      at (714) 590-8522.
  46.  
  47.      Thank you for your support!
  48.  
  49.      Best regards,
  50.  
  51.      Len
  52.  
  53.  
  54.                Updates included in version 1.03 of Almanac:
  55.  
  56.         -  Almanac is now compatible with third-party font scaling
  57.            utilities such as Bitstream's FaceLift and Adobe Type
  58.            Manager.  Screen and/or printer fonts provided by these
  59.            packages can be independently selected using the 'Fonts...'
  60.            dialog in the 'Preferences' menu (screen) and from the
  61.            'Print...' dialog (printer) located in the 'File' menu.
  62.  
  63.         -  The selections on the Config menu now un-check properly
  64.            when new auto-load modules are opened.  Moon Phases and
  65.            Christian/Jewish holidays were remaining checked when
  66.            they shouldn't have.
  67.  
  68.         -  Corrected a bug that caused the Notepad text (video display)
  69.            to wrap incorrectly and the caret (text cursor) to be the
  70.            wrong height when different fonts were selected for the
  71.            notepad text.
  72.  
  73.         -  Removed '72' point font selection from scalable devices
  74.            and replaced with a '16' point selection.  This was done
  75.            to allow a better selection of more common font sizes.
  76.  
  77.         -  Fixed the painting of the main calendar graphics from
  78.            improperly overlaying the status bar when the main window
  79.            was sized small and the scroll bars were activated.
  80.  
  81.         -  Alarm check box reflects the proper state when re-calling
  82.            a schedule appointment.  In 1.01 the check box improperly
  83.            displayed the setting of the last appointment set.
  84.  
  85.         -  Alarm check box has been enhanced to show (On/Off) text
  86.            which can be used (via keyboard Alt-O) to directly access
  87.            the check box independently of the alarm time.
  88.  
  89.         -  The overlay event type for calculating the Nth 'day' of the
  90.            month has been corrected for the 'last' day of the month
  91.            (i.e., 'Last Monday') which was not computing properly.
  92.  
  93.         -  Notes connected to schedule items can now be completely
  94.            deleted.  Version 1.01 would not re-save an empty notepad
  95.            entry for scheduled items.
  96.  
  97.         -  The 'Data Paths...' selection will now properly change the
  98.            overlay path.  Version 1.01 would not change the path if
  99.            the current environment had no open overlays.
  100.  
  101.         -  The input focus now correctly moves to the Scheduler when
  102.            the mouse is clicked on the 'General Notes' header bar.
  103.  
  104.         -  The Scheduler now properly scrolls 'floating' schedule text
  105.            (Text on appointments which are partially hidden at the top
  106.            of the scheduler display.  The text is 'floated' down the
  107.            entry so that it stays visible, if possible).
  108.  
  109.         -  Corrected Almanac from hanging the system when attempting to
  110.            initialize in the Jewish display mode.
  111.  
  112.         -  When making the very first note or schedule entry for a month
  113.            it was possible to lose this entry if an alarm was set with
  114.            the alarm clock immediately after making the entry.  This has
  115.            been corrected.
  116.  
  117.         -  Version 1.01 used the letter 'D' on the overlay edit dialog
  118.            to access both 'Date' and 'Shade'.  'Shade' has been changed
  119.            to 'Background' because there weren't any unique letters left!
  120.