home *** CD-ROM | disk | FTP | other *** search
/ Shareware Overload / ShartewareOverload.cdr / finance / rtm211.zip / RTM.DOC < prev    next >
Text File  |  1991-01-05  |  91KB  |  1,969 lines

  1.  
  2.  
  3.  
  4.  
  5.  
  6.  
  7.  
  8.                                 Resident-TaskManager
  9.  
  10.  
  11.                              Version 2.1 -- January 1991
  12.  
  13.  
  14.                            A Memory Resident Task Manager
  15.  
  16.  
  17.  
  18.  
  19.  
  20.  
  21.  
  22.  
  23.  
  24.                     Copyright (c) 1989,90,91 WetZoft Applications
  25.  
  26.  
  27.  
  28.  
  29.                                  All Rights Reserved
  30.  
  31.  
  32.  
  33.  
  34.  
  35.  
  36.  
  37.  
  38.  
  39.  
  40.  
  41.  
  42.  
  43.  
  44.  
  45.  
  46.  
  47.  
  48.  
  49.  
  50.  
  51.                         _______
  52.                    ____|__     |               (tm)
  53.                 --|       |    |-------------------
  54.                   |   ____|__  |  Association of
  55.                   |  |       |_|  Shareware
  56.                   |__|   o   |    Professionals
  57.                 -----|   |   |---------------------
  58.                      |___|___|    MEMBER
  59.  
  60.                                   Table of Contents
  61.  
  62.           I. INTRODUCTION............................................1
  63.             A. What Is Resident-TaskManager?.........................1
  64.             B. Resident-TaskManager Capacities & Requirements........1
  65.             C. Files Included on Distribution Disk...................2
  66.             D. Shareware.............................................2
  67.             E. Acknowledgements......................................3
  68.  
  69.           II. LEGAL STUFF............................................3
  70.             A. Trademarks Mentioned..................................3
  71.             B. Copyright Notice And License..........................3
  72.             C. Warranty..............................................4
  73.             D. Registration..........................................4
  74.             E. Support...............................................5
  75.             F. Bulletin Boards, Users Groups And Disk Vendors........5
  76.  
  77.           III. INSTALLATION AND DEFAULT OPTIONS......................5
  78.             A. Loading Resident-TaskManager on Your System...........5
  79.             B. Using The Install Program.............................6
  80.  
  81.           IV. COMMAND LINE OPTIONS..................................12
  82.             A. /D {Load as DISK Swapping TSR}.......................12
  83.             B. /D1 {Load as DISK Swapping TSR / Single Swap File}...13
  84.             C. /E {Load as EMS Swapping TSR}........................13
  85.             D. /F [drive:\path\filename] {Load Optional Task File]..13
  86.             E. /L {load only}.......................................13
  87.             F. /N {Normal DOS Program}..............................14
  88.             G. /P {Print Only}......................................14
  89.             H. /U {unload}..........................................14
  90.  
  91.           V. GENERAL USAGE..........................................14
  92.             A. Tasks................................................14
  93.             B. Displaying Task's....................................15
  94.             C. Audit Files..........................................15
  95.             D. Menus................................................15
  96.             E. Commands.............................................16
  97.             F. Swapping-Memory-Resident.............................16
  98.             G. Popping Up...........................................17
  99.  
  100.           VI. COMMAND REFERENCE.....................................17
  101.             A. Scrolling The Display................................17
  102.             B. Date Manipulations...................................17
  103.             C. Help.................................................18
  104.             D. Menus................................................18
  105.             E. File Menu Options - "F"..............................19
  106.             F. Edit Menu - "E"......................................20
  107.             G. Delete Menu - "D"....................................22
  108.             H. Sort Menu - "S"......................................23
  109.             I. Print Menu - "P".....................................23
  110.  
  111.  
  112.           Resident-TaskManager Documentation                    Page: i
  113.  
  114.  
  115.  
  116.  
  117.  
  118.  
  119.             J. Quit Menu - "Q"......................................24
  120.  
  121.           VII. COMMAND SUMMARY......................................24
  122.  
  123.           VIII. EDITING KEYS........................................25
  124.  
  125.           IX. TECHNICAL NOTES.......................................26
  126.  
  127.           X. ASSOCIATION OF SHAREWARE PROFESSIONALS.................26
  128.             A. The primary goals of the ASP.........................27
  129.  
  130.           XI. OTHER PROGRAMS BY WETZOFT APPLICATIONS................27
  131.             A. CALRPT...............................................27
  132.             B. CALTRV...............................................27
  133.  
  134.           XII. REVISION HISTORY.....................................27
  135.  
  136.  
  137.  
  138.  
  139.  
  140.  
  141.  
  142.  
  143.  
  144.  
  145.  
  146.  
  147.  
  148.  
  149.  
  150.  
  151.  
  152.  
  153.  
  154.  
  155.  
  156.  
  157.  
  158.  
  159.  
  160.  
  161.  
  162.  
  163.  
  164.  
  165.  
  166.  
  167.  
  168.  
  169.  
  170.  
  171.  
  172.           Resident-TaskManager Documentation                   Page: ii
  173.  
  174.  
  175.                Resident-TaskManager(RTM) is a program to manage lists of
  176.           Tasks, Assignments, Reminders or ToDo's.  This can be anything
  177.           you want it to be: a general list of things to do, a list of
  178.           appointments, tasks you've delegated, projects your tracking,
  179.           etc.
  180.  
  181.                One of Resident-TaskManager's most important features is
  182.           it's ability to optionally load as a memory-resident program
  183.           (TSR). When loaded as a TSR, Resident-TaskManager is available
  184.           whenever you need to use it.  And, it only uses about 6 of DOS'
  185.           lower 640K while doing so.
  186.  
  187.                NOTE: Resident-TaskManager does NOT have to be loaded
  188.           memory-resident. It can be run as normal DOS task from the
  189.           command line or within a Window's or DesqView Window.
  190.  
  191.           Resident-TaskManager has the following features for managing
  192.           tasks and lists:
  193.  
  194.              . Multiple lists / Task Files
  195.              . Add, Modify, Delete, Repeat, and Transfer Tasks
  196.              . Task File Searching
  197.              . 3 Levels of Sorting
  198.              . Task Prioritization
  199.              . Easy date manipulation and pop-up calendar
  200.              . A user-definable field
  201.              . Audit Files with view and search capability
  202.              . Simple Printing
  203.              . DOS Shell (when running Non-Resident)
  204.              . File Linking for Extended Task Information
  205.  
  206.                Resident-TaskManager provides the best combination of memory
  207.           usage, simplicity, and features for managing small lists of
  208.           tasks.
  209.  
  210.                Attention SK+ Owners!! - Now you can integrate your task
  211.           list with your SK+ Calendar. Using CALRPT and/or CALTRV,
  212.           available separately from WetZoft Applications or on CompuServe
  213.           (BORAPP LIB 2 & IBMSYS LIB 3), you can merge task lists created
  214.           using Resident-TaskManager with a formatted listing of your SK+
  215.           Calendar/Time Planner. A short description of CALRPT and CALTRV
  216.           appears later in this document.
  217.  
  218.              B. Resident-TaskManager Capacities & Requirements
  219.  
  220.           . 150 Absolute maximum number of Tasks. The default is 50. You
  221.                can use the install program to set this number depending on
  222.                the amount of EMS memory / disk space you want to use.
  223.  
  224.           . Requires about 6K of real memory (DOS' 640K)
  225.  
  226.           Resident-TaskManager Documentation                         Page: 1
  227.  
  228.  
  229.           . Requires about 150K of EMS, or approximately 300K of disk space
  230.                - This is based on the Max Tasks set in RTMINST.
  231.  
  232.           . RTM cannot be loaded globally within a DesqView or Windows
  233.                environment. They fight each other for the keyboard and RTM
  234.                always loses. However, RTM runs fine within a window.
  235.  
  236.           *NOTE: Resident-TaskManager will not pop-up over a graphics
  237.           screen such as Windows (Although it can be run within a Window).
  238.           This restriction is for two reasons. 1) It takes a lot of memory
  239.           to save/restore the graphics screen and 2) We have not seen a
  240.           sure fire way to detect all modes and all colors properly. Hence
  241.           we were not satisfied with the results.
  242.  
  243.           If you are using a graphics program and wish to pop-up Resident-
  244.           TaskManager, you must switch the program to text mode first(if
  245.           the program provides this option).
  246.  
  247.              C. Files Included on Distribution Disk
  248.  
  249.           The Resident-TaskManager Distribution Disk contains the following
  250.           files:
  251.  
  252.           RTM.EXE        - The Resident-TaskManager program
  253.           RTM.DAT        - A Short Help File in Resident-TaskManager Format
  254.           RTM.DOC        - This file
  255.           RTMCONVT.EXE   - A Conversion Program to convert RTM 1.x files to
  256.                            2.x format.
  257.           RTMINST.EXE    - An installation program for setting default
  258.                            options
  259.           README         - Changes or important information not included in
  260.                            the printed documentation
  261.                            (RTM.DOC).
  262.           REGISTER.BAT   - A BATch file to print out the registration form
  263.                            to your printer (LPT1)
  264.           REGFORM.DOC    - The actual Registration Form
  265.           PRINTDOC.BAT   - A BATch file to print out this documentation
  266.                            file to your printer (LPT1)
  267.           VENDOR.DOC     - Instructions to Disk Vendors who wish to
  268.                            distribute Resident-TaskManager.
  269.  
  270.                Copy these files onto your disk into whatever directory you
  271.           wish.  Then, consider how you want to run Resident-TaskManager
  272.           and set your options(See: Installation And Default Options later
  273.           in this document). Once you set your default options using the
  274.           RTMINST program, RTM.EXE and your data(Task) files are the only
  275.           files needed on your hard disk.
  276.  
  277.              D. Shareware
  278.  
  279.                Shareware is a distribution method, not a type of software.
  280.           You should find software to suit your needs and pocketbook,
  281.           whether it's commercial or Shareware. The Shareware system makes
  282.           fitting your needs easier, because you can try before you buy.
  283.           And because the overhead is low, prices are low also. Shareware
  284.  
  285.           Resident-TaskManager Documentation                         Page: 2
  286.  
  287.  
  288.           has the ultimate money-back guarantee -- if you don't use the
  289.           product, you don't pay for it.
  290.  
  291.                Resident-TaskManager is distributed as Shareware -- this
  292.           means WetZoft Applications encourages users, subject to
  293.           restrictions described below, to share copies of this program
  294.           with friends, associates and bulletin boards. You may not share
  295.           the registered version of Resident TaskManager.
  296.  
  297.                If you make copies of Resident-TaskManager, you must include
  298.           all files in the original distribution file.  You are not
  299.           permitted to distribute Resident-TaskManager without this
  300.           documentation.
  301.  
  302.              E. Acknowledgements
  303.  
  304.                Thanks to TurboPower Software for furnishing an excellent
  305.           set of utilities (Turbo Professional 5.0 and Object Professional
  306.           1.0) that made this program possible in 25% of the time it would
  307.           have taken us otherwise.
  308.  
  309.                Thanks to my co-author Terry Hughes who put in many long
  310.           hours on this project. Terry really did all the hard stuff!
  311.  
  312.           II. LEGAL STUFF
  313.  
  314.              A. Trademarks Mentioned
  315.  
  316.           Turbo Pascal and SideKick Plus are trademarks of Borland
  317.           International
  318.           Turbo Professional and Object Professional are trademarks of
  319.           TurboPower Software
  320.           Window's is a trademark of Microsoft Corporation
  321.           DesqView is a trademark of Quarterdeck Office Systems
  322.  
  323.              B. Copyright Notice And License
  324.  
  325.                This document; other accompanying written and disk-based
  326.           notes and specifications; and all referenced and related program
  327.           files, demonstration code and object modules accompanying this
  328.           document are copyrighted by WetZoft Applications.  The copyright
  329.           owner hereby licenses you to: initial use of the software; make
  330.           as many copies of the software and documentation as you wish;
  331.           give exact copies of the original to anyone; and distribute the
  332.           software and documentation in its unmodified form via electronic
  333.           means.  There is no charge for any of the above.
  334.  
  335.                This is NOT free software.  This license allows you to use
  336.           this software without charge for a period of 30 days. In order to
  337.           continue using this software, include this software as part of
  338.           any product, either commercial, shareware, freeware, or public
  339.           domain, REGISTRATION IS REQUIRED.  Any other use of Resident-
  340.           TaskManager is in violation of federal copyright laws.
  341.  
  342.  
  343.           Resident-TaskManager Documentation                         Page: 3
  344.  
  345.  
  346.                No copy of the software may be distributed or given away
  347.           without this accompanying documentation; this notice must not be
  348.           removed.  ONLY COPIES OF THE SHAREWARE VERSION MAY BE DISTRIBUTED
  349.           IN ANY FORM. Contact WetZoft Applications if you receive a copy
  350.           that does not comply with these requirements.
  351.  
  352.              C. Warranty
  353.  
  354.                There is no warranty of any kind associated with this
  355.           software, and the copyright owner is not liable for damages of
  356.           any kind.  By using this software, you agree to this. Every
  357.           effort has been made by WetZoft Applications to make this product
  358.           bug-free.  However, the nature of software development is that it
  359.           is impossible to guarantee bug-free software. Every attempt will
  360.           be made to correct any verifiable bug reported. Upgrades will be
  361.           made available to all registered users.
  362.  
  363.              D. Registration
  364.  
  365.           To register Resident-TaskManager, fill out the registration form
  366.           (Type REGISTER from the command line) included with this
  367.           documentation, and send a check or money order (in US funds only)
  368.           for the appropriate amount to:
  369.  
  370.                     WetZoft Applications
  371.                     788 Martin Ct West
  372.                     Severn MD 21144-2213
  373.  
  374.                Upon receipt of the appropriate registration fee, WetZoft
  375.           Applications will acknowledge the registration and
  376.  
  377.           .    Provide the user with the codes necessary to remove the
  378.                registration reminder screen.
  379.  
  380.           .    Provide the user with a registration number entitling the
  381.                user to upgrades and telephone support.
  382.  
  383.           .    Provide the user with a printed copy of the documentation
  384.                and the latest copy of the software. Please specify disk
  385.                size on the registration form. If no disk size is specified
  386.                5 1/4 inch disks will be sent.
  387.  
  388.                The registration fee is for the use of a single copy of
  389.           Resident-TaskManager by ONE individual. Resident-TaskManager may
  390.           be used on any computer owned by the registered user so long as
  391.           there is NO possibility of Resident-TaskManager being used at
  392.           more than one location at the same time. Please contact WetZoft
  393.           Applications for information on multiple copy registration and
  394.           site licenses.
  395.  
  396.                Telephone support will only be provided to registered users.
  397.           If you need technical assistance and you are NOT registered, you
  398.           may either write to WetZoft Applications the address above, or
  399.           contact the author on Compuserve:
  400.  
  401.           Resident-TaskManager Documentation                         Page: 4
  402.  
  403.  
  404.                     Jim Wetzel [75166,3200]
  405.                     E-Mail, BORAPP, IBMSYS
  406.  
  407.              E. Support
  408.  
  409.                Registered Users of Resident-TaskManager are entitled to the
  410.           following support:
  411.  
  412.                .    CompuServe - The preferred method of support is via
  413.                     CompuServe. Technical questions and inquires can be E-
  414.                     Mailed to: Jim Wetzel [75166,3200].
  415.  
  416.                .    Mail Support - You can send all questions and inquires
  417.                     to the address listed above. WetZoft Applications will
  418.                     respond as promptly as possible to your inquiry.
  419.  
  420.                .    Telephone Support - Registered users may call WetZoft
  421.                     Applications at (301)-969-9385 for technical support.
  422.                     Voice response is generally available weekday evenings.
  423.                     Messages are checked periodically throughout the day.
  424.  
  425.                For Non-Registered users of Resident-TaskManager, we will
  426.           provide you with assistance to install a shareware copy of
  427.           Resident-TaskManager and evaluate it during the 30 day evaluation
  428.           period. WetZoft Applications cannot guarantee continued support
  429.           to Non-Registered Users beyond the 30 day evaluation period.
  430.  
  431.              F. Bulletin Boards, Users Groups And Disk Vendors
  432.  
  433.                UNDER NO CIRCUMSTANCES MAY RESIDENT-TASKMANAGER BE
  434.           DISTRIBUTED WITHOUT ALL ACCOMPANYING DOCUMENTATION FILES
  435.           (INCLUDING THIS COMPLETE FILE), ALL PROGRAMS, AND OTHER MATERIALS
  436.           PROVIDED WITH THE OFFICIAL COPIES FROM WETZOFT APPLICATIONS.  ANY
  437.           OTHER SUCH DISTRIBUTION OF RESIDENT-TASKMANAGER OR ITS RELATED
  438.           FILES, EXCEPT AS PROVIDED FOR IN THIS LICENSE, SHALL BE
  439.           DETERMINED TO BE IN VIOLATION OF FEDERAL COPYRIGHT LAWS.
  440.  
  441.           III. INSTALLATION AND DEFAULT OPTIONS
  442.  
  443.              A. Loading Resident-TaskManager on Your System
  444.  
  445.                To load RTM onto your system just follow the following
  446.           instructions.
  447.  
  448.                 1) Create a directory for Resident-TaskManager.
  449.                 2) Change to the Resident-TaskManager directory.
  450.                 3) Insert the distribution disk into drive "A".
  451.                 4) Copy the distribution disk onto you hard disk.
  452.                 5) Run the Resident-TaskManager installation program.
  453.  
  454.           A sample set of commands to accomplish the installation might
  455.           look like this: (assuming you are using the "C" drive.)
  456.  
  457.  
  458.  
  459.           Resident-TaskManager Documentation                         Page: 5
  460.  
  461.  
  462.                 C:\>MD RTM <Enter>
  463.                 C:\>CD RTM <Enter>
  464.                 C:\RTM>COPY A:*.* <Enter>
  465.                 C:\RTM>RTMINST <Enter>
  466.  
  467.              B. Using The Install Program
  468.  
  469.                Resident-TaskManager is somewhat unusual in that many of its
  470.           options can only be set via the install program (RTMINST).  The
  471.           reason for doing this: to reduce the amount of memory required
  472.           for this program (by reducing the size of the program itself).
  473.           Since most options are typically set only once, this should be a
  474.           reasonable trade-off.
  475.  
  476.           To run RTMINST, simply type: RTMINST <Enter>  from the DOS
  477.           prompt.
  478.  
  479.                RTMINST will look in the current directory for RTM.EXE.  If
  480.           it's not there, RTMINST will search your currently defined path.
  481.           If that fails as well, RTMINST will end with an error message.
  482.  
  483.                RTMINST presents a data-entry screen showing the name of
  484.           each configurable option and it's current value.  Use the <Enter>
  485.           key to move through the various options, setting the defaults as
  486.           you wish. Use the <F1> key at any time for a Pop-Up Help box for
  487.           the current field.
  488.  
  489.                Use <F10> to save your options and end the install program.
  490.           Use <Esc> to cancel the changes and end the program.  Use <F2> to
  491.           reset all options to the default levels.
  492.  
  493.                Some options can also be specified on the command line when
  494.           you run RTM (typically in your AUTOEXEC.BAT).
  495.  
  496.  
  497.           Datafile Path & Filename Default
  498.  
  499.                This is Resident-TaskManager's default data directory and
  500.           file name. RTM always looks here for it's data file. If the file
  501.           is NOT found, RTM will create a new one (with the specified name)
  502.           and allow you to begin adding records. You can override this
  503.           option at run-time with the /F [Filename] parameter.
  504.  
  505.                For the data file name, you can specify a new drive, path,
  506.           and file name. It is highly recommended you add a Drive & Path to
  507.           the filename supplied. If you do not Resident-TaskManager will
  508.           try to read its task file from whatever directory you first Pop-
  509.           Up in. While this may be useful in some situations it could also
  510.           lead to multiple task files spread across your hard disk.
  511.  
  512.  
  513.  
  514.  
  515.  
  516.  
  517.           Resident-TaskManager Documentation                         Page: 6
  518.  
  519.  
  520.           SwapFile Drive & Path Default
  521.  
  522.                If RTM can't find enough EMS (or Disk swapping is specified)
  523.           RTM will use a disk file "RTMSWAP1.$$$" to perform the swap. You
  524.           MUST specify at least a drive here.
  525.  
  526.                When swapping to disk RTM normally uses a dual file swapping
  527.           method - one to swap the program code out to and one to read the
  528.           RTM code in from.  An alternative is Single file swapping
  529.           (described below). With Single file swapping RTM can use one file
  530.           for both. The penalty of this option is an additional 3K in the
  531.           resident portion of the code and a little slower swapping.
  532.           However, this option is very useful for RAM disks where you can
  533.           conserve space and the speed penalty is rather small.
  534.  
  535.                For the swapfile path, specify the drive and optional path.
  536.           The last backslash is REQUIRED. RTMINST will make sure this drive
  537.           and path exists!  If it doesn't RTMINST will report an error and
  538.           you will have to correct the entry. The default is C:\. Valid
  539.           drives are C: -> Last Valid Drive.
  540.  
  541.  
  542.           Screen Colors Default
  543.  
  544.                RTM uses a variety of colors to make the screen more
  545.           readable. Use the +/-/Space keys to toggle through the color
  546.           options. The Color Sample Box always shows what the current color
  547.           selections will look like.
  548.  
  549.  
  550.           Blink Found Text
  551.  
  552.                One of RTM's features is the ability to search through your
  553.           Task file or Audit file for a string of text. If the specified
  554.           text string is found it will be highlighted and blink. If you
  555.           would prefer to just see the text highlighted - Set this option
  556.           to "N".
  557.  
  558.  
  559.           Hot Key Default
  560.  
  561.                Valid Hot Keys consist of one or more of: <Ctrl>, <Alt>,
  562.           <Left-Shift> and <Right-Shift> + one "other key". The "other key"
  563.           can be any VALID letter, number, or function key.
  564.  
  565.                For the Hot Key, simply press the desired hot key
  566.           combination.  The text description of the current hot keys lets
  567.           you verify RTMINST got the keystrokes correctly.  Here are a
  568.           couple of things to remember about valid hot key combinations:
  569.  
  570.           -    you must have at least one of: <Alt>, <Ctrl>, <Left-Shift>,
  571.                <Right-Shift> (these are all referred to as shift keys)
  572.  
  573.  
  574.  
  575.           Resident-TaskManager Documentation                         Page: 7
  576.  
  577.  
  578.           -    you can have multiple shift keys in any combination (i.e.,
  579.                your shift can consist of all four shift keys. But, I would
  580.                like to see a picture of you trying to hit all of them.)
  581.  
  582.           -    one (and only one) non-shift key follows your shift key(s)
  583.  
  584.           -    avoid keystroke combinations you might use in other programs
  585.                or other pop-up programs might use
  586.  
  587.                Also, there are a limited set of Keys the IBM BIOS does not
  588.           process directly (and neither does RTM). Some of these are
  589.           certain <Ctrl>-number/punctuation keys and a few <Alt>-
  590.           Punctuation keys. Generally most <Ctrl>-Letter/Function keys are
  591.           valid as are most <Alt>-Letter/Number/Function keys. One way to
  592.           be sure is to try the key you want to use - If it is displayed
  593.           then it is a valid HotKey. There should be enough to choose from
  594.           so that you don't conflict with any other TSR's or Function type
  595.           codes used by other programs.
  596.  
  597.  
  598.           Run Mode Default
  599.  
  600.                Resident-TaskManager has 4 Run Modes. "Normal Task" means to
  601.           run as a normal DOS program. "Swap EMS" (Recommended) means to
  602.           swap all but 6K to EMS and run as a TSR. "Swap Disk" means to
  603.           swap all but 6K to Disk and run as a TSR. "Swap Disk 1" means to
  604.           swap all but 9K to Disk AND use a single SWAP file. This option
  605.           is intended to be used ONLY for RAM Disks where saving space is
  606.           important and a little speed can be sacrificed.
  607.  
  608.           Note: "Disk Swap" will also be used if there is not enough EMS
  609.           available to run as "SWAP EMS".
  610.  
  611.           For the Run Mode option, use the +/-/Space keys to toggle through
  612.           the options.
  613.  
  614.              Option 1 - SWAP EMS (Best Performance) - Instructs RTM to run
  615.              as a swapping TSR using approximately 6k of your 640K memory
  616.              and about 150K of exPANDed (EMS) memory. This is the highest
  617.              performance option with low memory requirements and fast pop-
  618.              ups. This can also be chosen at run time with the {/E} command
  619.              line option.
  620.  
  621.              Option 2 - SWAP Disk 1 (Good Performance) - Instructs RTM to
  622.              run as a swapping TSR using approximately 9k of your 640K
  623.              memory and about 150K of disk space. This has good performance
  624.              with low memory requirements and somewhat slower pop-ups.
  625.              Performance of this option can be enhanced by the use of a RAM
  626.              Disk. (A perfect option for AT and Lap Top users with a free
  627.              384K of exTENDed memory.) This can also be chosen at run time
  628.              with the {/D1} command line option.
  629.  
  630.              Option 3 - SWAP Disk (Somewhat slower Performance) - Instructs
  631.              RTM to run as a swapping TSR using approximately 6k of your
  632.  
  633.           Resident-TaskManager Documentation                         Page: 8
  634.  
  635.  
  636.              640K memory and about 300K of disk space. This has somewhat
  637.              slower performance with low memory requirements and somewhat
  638.              slower pop-ups. Performance of this option can be enhanced by
  639.              the use of a RAM Disk. (A good option for AT users with a free
  640.              384K of exTENDed memory.) This can also be chosen at run time
  641.              with the {/D} command line option.
  642.  
  643.              Option 4 - Normal Task (Default) - Instructs RTM to run as a
  644.              normal DOS task. This option is useful from the command line
  645.              but does not allow you to pop-up over your existing work. This
  646.              option can be used if you are using some other form of task
  647.              switching program like Windows or DesqView. This can also be
  648.              chosen at run time with the {/N} command line option.
  649.  
  650.  
  651.           Load Only Option
  652.  
  653.                When RTM is loaded as a memory resident program, it executes
  654.           the program as it loads.  That is, you have a chance to view and
  655.           manipulate your Tasks.  If you just want RTM to load quietly and
  656.           NOT display the your Tasks initially, then set this option to
  657.           "Y"es. This can also be chosen at run time with the {/L} command
  658.           line option.
  659.  
  660.  
  661.           Max Tasks Supported
  662.  
  663.                Resident-TaskManager can support up to 150 Tasks. This
  664.           requires about 200K of EMS/disk space when loaded in "Resident"
  665.           mode.  You can reduce the EMS space requirement by setting a
  666.           lower limit (each Task requires about 430 bytes). Select a value
  667.           between 10 and 150. RTM's default is 50.
  668.  
  669.  
  670.           Sort Order Default
  671.  
  672.                RTM provides various Sort options for viewing your data. You
  673.           can pick the one you would like have as default by toggling
  674.           through the options with the +/-/Space keys. You will still be
  675.           able to sort & view your tasks in a different order within RTM.
  676.           This option is also used as the Quick Sort method when you press
  677.           the <Alt-S> key within RTM.
  678.  
  679.  
  680.           Auto Sort Option
  681.  
  682.                By default RTM will load your data and display it as it was
  683.           last saved or modified. This option allows you to have RTM
  684.           automatically sort your Task file each time it is loaded and each
  685.           time you add or modified a record. If this option is set to "Y"
  686.           RTM uses the Default Sort Order on loading and the last sort
  687.           option the user specified after adding or modifying a record.
  688.  
  689.  
  690.  
  691.           Resident-TaskManager Documentation                         Page: 9
  692.  
  693.  
  694.           User Field Name Default
  695.  
  696.                Resident-TaskManager provides one user-definable field. It
  697.           is 10 characters in length and has a title of up to 7 characters.
  698.           The title is displayed where ever Task's are displayed or
  699.           printed. The default name for this field is "Project". You can
  700.           change this name here and also specify a default Value in the
  701.           User Value Field.
  702.  
  703.  
  704.           User Field Value Default
  705.  
  706.                Resident-TaskManager provides a 10 characters user-definable
  707.           field. The field is displayed next to the task on the Task
  708.           screen. The default for this field is blank. If most of your
  709.           "Projects" or whatever you use this field for have the same value
  710.           - you can specify that value here. RTM will automatically assign
  711.           that value to the user field as you add records. You can always
  712.           type over the displayed value.
  713.  
  714.  
  715.           Delete Option Default
  716.  
  717.                Resident-TaskManager provides various methods of DELETEing
  718.           Tasks. These are ERASE: To completely erase a task from the file;
  719.           MOVE: To move the task to the AUDIT file and then erase the task;
  720.           or COPY: To copy the task to the AUDIT file and leave the task
  721.           for editing. When you select "D"elete from the RTM Menu the
  722.           option specified here will be automatically highlighted and you
  723.           only need hit "Enter" to carry out the action. You will still be
  724.           able to select another option by scrolling with the arrow keys.
  725.           Additionally, RTM will use this default if you specify Quick
  726.           Delete using the <Alt-D> keys on the main screen.  The +/-/Space
  727.           keys toggles this field.
  728.  
  729.  
  730.           European Dates Option
  731.  
  732.                Resident-TaskManager can show its dates in Standard Format
  733.           (MM/DD/YY) or, if you set this flag to "Y", in European Format
  734.           (DD.MM.YY).
  735.  
  736.  
  737.           Date Display Option
  738.  
  739.                Resident Task Manager displays the DUE Date of each task by
  740.           default. If you would rather see the date the task was ASSIGNED
  741.           you can toggle the Date Display. The +/-/Space keys toggles this
  742.           field. You can always toggle the field while RTM is active by
  743.           pressing the <Space> bar.
  744.  
  745.  
  746.  
  747.  
  748.  
  749.           Resident-TaskManager Documentation                        Page: 10
  750.  
  751.  
  752.           Default Task Priority
  753.  
  754.                Resident-TaskManager provides the capability to PRIORITIZE
  755.           your Tasks. If you want to have a Default value supplied - enter
  756.           it here. The priority field is used in some of the Task sorting
  757.           options. Recommended values are A -> Z or 0 -> 9 or Space. The
  758.           default is "B". It is recommended to use all numbers or all
  759.           letters. Intermixed letter & number priorities may not sort the
  760.           way you expect.
  761.  
  762.                Beginning with Version 2.1 RTM now uses the "-" character in
  763.           the priority field to indicate the TASK is "DONE". You can now
  764.           flag a task as DONE by hitting the <Alt-M> key for "Mark Task
  765.           Done". This is also available from the "Edit" menu. All data for
  766.           the task is retained as is except the Priority field is changed
  767.           to "-". You can remove the Done flag by invoking the Modify Task
  768.           from the Edit Menu and changing the Priority to something other
  769.           than "-".  This option is good for keeping track of the work you
  770.           have completed during the week but don't want to delete or move
  771.           to the Audit file. ***NOTE: The date marked as completed on the
  772.           Audit file is still the day the task is written - not the day it
  773.           was marked "DONE".
  774.  
  775.  
  776.           Overdue Warning Option
  777.  
  778.                Resident-TaskManager will, by default, check your tasks to
  779.           see if you have any Past Due. If you do, each time you pop-up
  780.           RTM, you will be reminded with a short warning message. If you do
  781.           not want RTM to check these tasks for you just change this option
  782.           to "N".
  783.  
  784.  
  785.           File Write After Add/Modify Option
  786.  
  787.                Resident-TaskManager normally writes all task file changes
  788.           when you exit the program. If you would prefer, you can set this
  789.           option to "Y" and write the task file after each change is made
  790.           via the Add/Modify screen. Warning - After the file is written
  791.           you cannot use the Quit with No Save option from the Quit Menu.
  792.  
  793.  
  794.           Printer Setup / Reset Default String
  795.  
  796.                The Printer Setup and Reset strings are sequences of control
  797.           and ASCII characters to initialize or reset your printer. To
  798.           enter control characters, first press <Ctrl-P> (control-P), then
  799.           enter the desired control character (e.g. <Ctrl-O>). Control
  800.           characters are displayed as uppercase alphabetics (Ctrl-O is
  801.           displayed as 'O', for example) in a different color.
  802.  
  803.  
  804.  
  805.  
  806.  
  807.           Resident-TaskManager Documentation                        Page: 11
  808.  
  809.  
  810.           Print Page Size Default
  811.  
  812.                The Printer Page Size setting tells Resident-TaskManager how
  813.           many lines to print on it's reports. When the page fills up to
  814.           (or near) the specified page size, Resident-TaskManager issues a
  815.           Form Feed character to advance the printer to the next page.
  816.  
  817.  
  818.           Print Descriptions
  819.  
  820.                Resident TaskManager's print facility allows you to print
  821.           the Attached Description with the Task Information or to just
  822.           print the basic Task Information. If this option is set to "Y"
  823.           the Attached Descriptions are printed. The default is NOT to
  824.           print the Attached Descriptions or "N". This option can also be
  825.           toggled from the Print Menu.
  826.  
  827.  
  828.           Print to File Option
  829.  
  830.                Resident TaskManager's print facility gives you the ability
  831.           to print the reports to the printer {LPT1} or to a disk file
  832.           "taskfile.RPT". If this option is set to "Y" the reports will be
  833.           printed to disk. The default is to print the report to paper
  834.           {LPT1} or "N". This option can also be toggled from the Print
  835.           Menu.
  836.  
  837.  
  838.           Print Next "nnn" Days
  839.  
  840.                Resident TaskManager's print facility allows you to print
  841.           tasks for the next "nnn" days. This means reports will contain
  842.           Tasks due in the next "nnn" days plus all Past Due tasks. The
  843.           default is to print the next 30 days. You can set this to any
  844.           period between 0 - 999. If you specify "0" RTM will ONLY print
  845.           tasks DUE Today - No past Due tasks will be printed.
  846.  
  847.           IV. COMMAND LINE OPTIONS
  848.  
  849.                Resident-TaskManager provides the ability to change some
  850.           options from the command line when you load RTM.  These options
  851.           are those most likely to change on a temporary basis (where you
  852.           wouldn't want the burden of re-running the installation program).
  853.  
  854.                Typing RTM /? will give a list of the valid command line
  855.           options.
  856.  
  857.              A. /D {Load as DISK Swapping TSR}
  858.  
  859.              This option tells Resident-TaskManager to load as a DISK-
  860.              Swapping TSR. This is a very good way to gain the
  861.              functionality of Resident-TaskManager if you don't have EMS
  862.              memory available on your system. Resident-TaskManager will
  863.              swap to the path specified in the install program or to the
  864.  
  865.           Resident-TaskManager Documentation                        Page: 12
  866.  
  867.  
  868.              default C:\. Resident-TaskManager creates two files
  869.              RTMSWAP1.$$$ and RTMSWAP2.$$$. PLEASE DO NOT DELETE these
  870.              files while RTM is running - it is a nasty sight!
  871.  
  872.              ATTENTION AT Owners: Resident-TaskManager likes to use part of
  873.              the 384K ram disk above the 640K line.
  874.  
  875.              B. /D1 {Load as DISK Swapping TSR Using a Single Swap File}
  876.  
  877.              When swapping to disk RTM normally uses a dual file swapping
  878.              method {/D} - one to swap the program code out to and one to
  879.              read the RTM code in from.  An alternative is Single file
  880.              swapping {/D1}. With Single file swapping RTM can use one file
  881.              for both. The penalty of this option is an additional 3K in
  882.              the resident portion of the code and a little slower swapping.
  883.              However, this option is very useful for RAM disks where you
  884.              can conserve space on larger Task files and the speed penalty
  885.              is rather small.
  886.  
  887.              C. /E {Load as EMS Swapping TSR}
  888.  
  889.              This tells Resident-TaskManager to load itself memory-resident
  890.              using as little memory as possible.  This is the preferred
  891.              running mode in most cases.  If enough EMS (exPANDed memory)
  892.              is available, all swapping will be done using EMS memory.  If
  893.              EMS is not available, Resident-TaskManager will swap to DISK.
  894.              This will result in a slight delay when you hit the "hot key".
  895.              In either mode, Resident-TaskManager consumes only 6K of RAM.
  896.  
  897.              D. /F [drive:\path\filename] {Load Optional Task File]
  898.  
  899.              This option tells Resident-TaskManager where to find your
  900.              data.  This overrides the default (or installed) location for
  901.              your data.
  902.  
  903.              The default (uninstalled) file name is RTM.DAT.  And, the name
  904.              of the default audit file is RTM.AUD.
  905.  
  906.              Audit Files:
  907.  
  908.              An audit file is always derived from the data file name.  It
  909.              is identical to the data file name with the exception of the
  910.              extension.  The extension for the audit file is .AUD.
  911.  
  912.              If you specified a file name of C:\DATA\PROJECT1.DAT
  913.  
  914.              The Audit File will be C:\DATA\PROJECT1.AUD.
  915.  
  916.              Audit Files are explained in more detail in the next section.
  917.  
  918.              E. /L {load only}
  919.  
  920.              This option is only relevant when Resident-TaskManager is
  921.              being installed in memory resident mode.  Normally, when you
  922.  
  923.           Resident-TaskManager Documentation                        Page: 13
  924.  
  925.  
  926.              load Resident-TaskManager memory resident, RTM will display
  927.              your list of items and give you a chance to Add/Modify/Delete
  928.              etc. When you exit, Resident-TaskManager will stay resident in
  929.              memory, available whenever you press the hot keys.
  930.  
  931.              If you don't want Resident-TaskManager to show your tasks when
  932.              it loads (i.e., just load quietly) then specify this option on
  933.              the command line.
  934.  
  935.              F. /N {Normal DOS Program}
  936.  
  937.              This tells Resident-TaskManager to run as a Normal foreground
  938.              task; it will not stay resident in memory.
  939.  
  940.              G. /P {Print Only}
  941.  
  942.              You can invoke RTM reports from the command line with RTM /P.
  943.              RTM will not be loaded. The tasks are automatically sorted
  944.              using the default sort option.
  945.  
  946.              H. /U {unload}
  947.  
  948.              This option tells Resident-TaskManager to unload from memory.
  949.              You can only use this option from the DOS command line; and,
  950.              only if Resident-TaskManager was the LAST PROGRAM LOADED in
  951.              memory.  If either of these conditions is not true, Resident-
  952.              TaskManager will not unload from memory.
  953.  
  954.           V. GENERAL USAGE
  955.  
  956.              A. Tasks
  957.  
  958.                A Task consists of a 48 character Task name, a due-date, an
  959.           age, a Priority (User Selected) and one user defined field of 10
  960.           characters.  The due day-of-week is also displayed.  A Task can
  961.           have up to 5 extra description lines of 72 characters each.
  962.  
  963.                Resident-TaskManager can also view an ASCII file if the
  964.           filename is specified as the only entry on the first line of the
  965.           Attached Description. You can view the file using the <Alt-V>
  966.           command. This function allows you to keep more detailed notes in
  967.           a separate ASCII file but still view it through RTM. You must
  968.           maintain this file with your own Text Editor or Word Processor.
  969.           NO editing facilities exist within RTM for this external file.
  970.           You can still put additional information on lines 2 - 5.
  971.  
  972.                The user defined field can be whatever you want it to be:
  973.           Project, Delegated-To, Time, Phone No., etc.  The title of the
  974.           user field can be changed through the installation program.
  975.  
  976.                Tasks are kept in a file on your disk.  You can specify the
  977.           name and location of the task file with the installation program.
  978.           You can also specify a file name as you load the program; or,
  979.           change it while the program is running.  When you complete Tasks,
  980.  
  981.           Resident-TaskManager Documentation                        Page: 14
  982.  
  983.  
  984.           you can simply erase them; or, you can move or copy them to an
  985.           audit file.  This gives you a running record of things you have
  986.           accomplished (and when you accomplished them).
  987.  
  988.              B. Displaying Task's
  989.  
  990.                Resident-TaskManager presents a full-screen list of your
  991.           Tasks.  A highlight bar shows the currently selected task.  Every
  992.           task can have up to five lines of attached descriptions.  You can
  993.           also link to an External file using the <Alt-V> command to view
  994.           Extended Descriptions. The description attached to the
  995.           highlighted item is always displayed at the bottom of the screen.
  996.           These two windows are called, respectively, the main window and
  997.           the attached descriptions window.
  998.  
  999.                The top line on the screen is the status line.  It tells you
  1000.           the name of the current Task file and the current date and time.
  1001.           Optionally, the top line may show you a pull-down menu, invoked
  1002.           with the <F10> key, giveing you access to all of Resident-
  1003.           TaskManager's commands.
  1004.  
  1005.                The bottom line is the command line.  It displays most of
  1006.           the commands and keys currently active. In addition to the
  1007.           commands shown, other commands are available as quick commands.
  1008.           See the on-line help <F1> for a list of most Quick Commands.
  1009.  
  1010.                Some functions (e.g., Add and Modify) require a third window
  1011.           to pop-up.  These pop-up windows are always temporary.
  1012.  
  1013.              C. Audit Files
  1014.  
  1015.                Resident-TaskManager helps you keep track of work you have
  1016.           completed by allowing you to copy completed tasks to an Audit
  1017.           File. After you have completed a specific task you can copy it to
  1018.           the Audit File by using the Move or Copy option from the Delete
  1019.           Menu (described below). Tasks are copied to the Audit File in
  1020.           their entirety plus they are time and date stamped when they were
  1021.           copied/completed. The Audit File can always be viewed by hitting
  1022.           the "V" key or selecting the "View Audit File" from the File
  1023.           pull-down menu.
  1024.  
  1025.              D. Menus
  1026.  
  1027.                As mentioned above, Resident-TaskManager has an optional
  1028.           pull-down menu system invoked by pressing the <F10> function key.
  1029.           The pull-down menus provide access to all of Resident-
  1030.           TaskManager's functions. These functions are categorized by File,
  1031.           Edit, Delete, Sort, Print, and Quit. Under each category there
  1032.           are a number of options to choose from. While some options can
  1033.           only be accessed from the menu system, many options list a
  1034.           "Quick" key next to it as a reminder that it can be invoked with
  1035.           a single keystroke. The "Quick" key is not valid while the pull-
  1036.           down menu is displayed but serves as a reminder for future
  1037.           reference.
  1038.  
  1039.           Resident-TaskManager Documentation                        Page: 15
  1040.  
  1041.  
  1042.              E. Commands
  1043.  
  1044.                All commands are simple, unshifted, single letter commands.
  1045.           The date of the currently selected item can be manipulated using
  1046.           the Left/Right (and <Ctrl>-Left/Right) arrow keys. A brief help
  1047.           screen is available through <F1> and <Alt-H>.
  1048.  
  1049.                The command line at the bottom of the screen always shows
  1050.           most of the currently active commands or options. A detailed list
  1051.           of commands is available in the next section.
  1052.  
  1053.              F. Swapping-Memory-Resident
  1054.  
  1055.                Resident-TaskManager is designed to run as a memory-resident
  1056.           program that uses as little memory as possible.  The actual
  1057.           amount of memory required to run Resident-TaskManager is about
  1058.           150K bytes (depending on the value of Max Tasks).  This is far
  1059.           too much memory to devote to one memory-resident program.  So,
  1060.           Resident-TaskManager swaps the bulk of itself to either EMS
  1061.           memory or disk.
  1062.  
  1063.                If you have it, EMS memory is by far the best choice
  1064.           (although a RAM-Disk swap is pretty close).  In this
  1065.           configuration, Resident-TaskManager pops-up almost immediately.
  1066.           If Resident-TaskManager can find enough EMS memory, it will use
  1067.           it.
  1068.  
  1069.                If Resident-TaskManager can't find enough EMS memory, it
  1070.           will swap to disk.  This requires about 300K of disk space.  The
  1071.           only drawback to this method is increased loading times.  That
  1072.           is, when you press the Resident-TaskManager hot-key, it takes a
  1073.           few moments to pop-up (depending on the speed of your disk).
  1074.           While this delay can certainly be bothersome, it still offers the
  1075.           advantage of not having to exit your current program, just to
  1076.           view or add items to your Task list.
  1077.  
  1078.                You can also run Resident-TaskManager from the DOS command
  1079.           line.  You may want to this if you don't have EMS memory and you
  1080.           aren't in the middle of another program.  This gives you the best
  1081.           of both worlds:  a normal, fast-loading Task Manager when you're
  1082.           not doing anything else; and a somewhat slower, memory-Resident
  1083.           TaskManager for when you're in the middle of a program.
  1084.  
  1085.                One word of WARNING. It is possible to have Resident-
  1086.           TaskManager loaded memory resident and from the DOS command line
  1087.           at the same time. If both copies are using the same task file
  1088.           each copy of the program is unaware of what the other copy has
  1089.           done. It would be very easy to make changes to your task file
  1090.           with one copy of the program save them and then make different
  1091.           changes to the other copy and overlay the previous changes. There
  1092.           are situations where it is useful to have two copies of RTM
  1093.           running but please be careful!
  1094.  
  1095.  
  1096.  
  1097.           Resident-TaskManager Documentation                        Page: 16
  1098.  
  1099.  
  1100.              G. Popping Up
  1101.  
  1102.                Resident-TaskManager is designed to pop-up very safely.  It
  1103.           won't pop-up in the middle of critical operations (like accessing
  1104.           your hard disk or over a graphic screen).  It is considerate of
  1105.           other pop-ups.  That is, it will allow other programs to pop-up
  1106.           over it, if it's not busy.
  1107.  
  1108.                There is one situation where other pop-ups can't be called
  1109.           while Resident-TaskManager is active.  Generally, TSRs installed
  1110.           AFTER Resident-TaskManager cannot be called.  Why?  Because
  1111.           Resident-TaskManager has "borrowed" their memory. Temporarily,
  1112.           those TSRs no longer exist.  Resident-TaskManager will put them
  1113.           back after it's finished.  Therefore, any TSR you might wish to
  1114.           pop-up over Resident-TaskManager, must be loaded before Resident-
  1115.           TaskManager.
  1116.  
  1117.                This brings up an important point about where to load
  1118.           Resident-TaskManager. Really, the above paragraph explains it
  1119.           all.  But, just in case it wasn't clear, NEVER LOAD Resident-
  1120.           TaskManager BEFORE A NETWORK DRIVER OR OTHER DEVICE DRIVER.
  1121.           Remember, all programs and drivers loaded after Resident-
  1122.           TaskManager will get swapped out when Resident-TaskManager pops-
  1123.           up.  Swapping out a Network Driver will cause most Networks to
  1124.           think the station is lost (and will probably log it out).
  1125.  
  1126.                In the case of Novell Netware, Resident-TaskManager will
  1127.           recognize if you are attempting to pop-up over a Network Driver
  1128.           and won't let you do it. It can't recognize other networks; so,
  1129.           be careful.
  1130.  
  1131.                Before popping up, Resident-TaskManager will save the
  1132.           contents of the current screen and restore those contents it is
  1133.           finished.  This is true for TEXT DISPLAYS only. Currently,
  1134.           Resident-TaskManager will not pop-up over graphics screens.
  1135.  
  1136.           VI. COMMAND REFERENCE
  1137.  
  1138.              A. Scrolling The Display
  1139.  
  1140.              <DnAr>    - Down Arrow moves the highlight bar down one line
  1141.              <UpAr>    - Up Arrow moves the highlight bar up one line
  1142.              <PgDn>    - Page Down displays the next screen full of items
  1143.              <PgUp>    - Page Up displays the previous screen full of items
  1144.              <HOME>    - Home displays the first item
  1145.              <END>     - End displays the last item
  1146.              <Esc>     - Escape removes the current pop-up window
  1147.  
  1148.              B. Date Manipulations
  1149.  
  1150.              All of the date manipulation commands operate on the currently
  1151.              highlighted item; or, on the Due Date field in the Add/Modify
  1152.              Window.
  1153.  
  1154.  
  1155.           Resident-TaskManager Documentation                        Page: 17
  1156.  
  1157.  
  1158.              -> Increment Day - The RightArrow increments the date by one
  1159.              day.
  1160.              <- Decrement Day - The LeftArrow decrements the date by one
  1161.              day.
  1162.              <Ctrl>-> Increment Week - The <Ctrl>-RightArrow combination
  1163.              increments the date by one week.
  1164.              <Ctrl><- Decrement Week - The <Ctrl>-LeftArrow combination
  1165.              decrements the date by one week.
  1166.  
  1167.              "C" - Pop-Up Calendar - Using "C" on any date field will
  1168.              invoke a pop-up calendar with either the task date or current
  1169.              date highlighted. You can then page through the calendar by
  1170.              day (right/left arrow), week (up/down arrow), month (Page-
  1171.              Up/Page-Down), or you can go to the current date by pressing
  1172.              the <Home> Key. Pressing <Enter> will accept the highlighted
  1173.              date, <Esc> will exit the calendar and leave the original date
  1174.              unchanged.
  1175.  
  1176.              " " - Space Bar - Pressing the <Space> key while displaying
  1177.              the main screen will cause the date being displayed to toggle
  1178.              between the "Due Date" of the task and the date the task was
  1179.              "Assigned". The "Left" column will continue to show the number
  1180.              of days left till the task is due.
  1181.  
  1182.              C. Help
  1183.  
  1184.              <F1> - Help Screen
  1185.  
  1186.              Pressing <F1> activates an abbreviated Help Screen for
  1187.              Resident-TaskManager. This screen gives you a quick reference
  1188.              for most, but not all, of RTM's commands.
  1189.  
  1190.              <Alt-H> - Same as <F1>
  1191.  
  1192.              D. Menus
  1193.  
  1194.              <F10> - Activate Pull-Down Menu Bar
  1195.  
  1196.              Pressing <F10> activates the pull-down menu system giving you
  1197.              access to all of Resident-TaskManager's commands. Under each
  1198.              category there are a number of options to choose from. You can
  1199.              pick an option by moving the highlight bar down to the desired
  1200.              option with the up and down arrows and pressing enter or you
  1201.              can choose the option by pressing the first letter of the
  1202.              option. The highlight bar will then either move down to the
  1203.              option selected or the option will execute immediately
  1204.              whichever is more appropriate. While some options can only be
  1205.              accessed from the menu system, many options list a "Quick" key
  1206.              to the right of it as a reminder it can be invoked with a
  1207.              single keystroke. The "Quick" key is not valid while the pull-
  1208.              down menu is displayed but serves as a reminder for future
  1209.              reference.
  1210.  
  1211.  
  1212.  
  1213.           Resident-TaskManager Documentation                        Page: 18
  1214.  
  1215.  
  1216.              E. File Menu Options - "F"
  1217.  
  1218.              Pressing "F" activates the File Menu with the following
  1219.              options:
  1220.  
  1221.                C)hange File - While Resident-TaskManager is running you can
  1222.                     switch to a different Task file without leaving RTM.
  1223.                     Switching files is useful if you use a different file
  1224.                     for different projects or maintain tasks / assignments
  1225.                     for various individuals.  Resident-TaskManager prompts
  1226.                     you for a new file name until you enter a valid file
  1227.                     name, press enter for a file pick list, or press <Esc>.
  1228.                     You will be asked if you wish to save the current file
  1229.                     prior to loading the new file if you have made any
  1230.                     changes. This option can also be used to re-read the
  1231.                     current file and cancel any changes you have made
  1232.                     without using the quit option to cancel changes.
  1233.  
  1234.                     <F3> - Short Cut For Change File from RTM's main task
  1235.                     screen.
  1236.  
  1237.                S)ave File - While running, you can Save the current Task
  1238.                     file without leaving the program. This is helpful if
  1239.                     you have made a lot of changes and have not saved your
  1240.                     work for some time.
  1241.  
  1242.                     <F2> - Short Cut for Save File from RTM's main task
  1243.                     screen.
  1244.  
  1245.                V)iew Audit File - Resident-TaskManager will create an Audit
  1246.                     file containing tasks deleted using the "Copy" or
  1247.                     "Move" options. While "V"iewing the audit file you can
  1248.                     also search/find a specific value by enter <Alt-F>.
  1249.                     Once the value is found it will be highlighted. You can
  1250.                     search for the next occurrence of the item by pressing
  1251.                     <Alt-A> for Find Again.
  1252.  
  1253.                     "V" - Short Cut Key for Viewing the Audit File from
  1254.                     RTM's main task screen.
  1255.  
  1256.                E)xtended Description View - Resident-TaskManager can also
  1257.                     view an ASCII file if the filename is specified as the
  1258.                     only entry on the first line of the Attached
  1259.                     Description. This function allows you to keep more
  1260.                     detailed notes in a separate ASCII file but still view
  1261.                     it through RTM. You must maintain this file with your
  1262.                     own Text Editor or Word Processor. NO editing
  1263.                     facilities exist within RTM for this external file. You
  1264.                     can still put additional information on lines 2 - 5.
  1265.  
  1266.                     <Alt-V> - Short Cut Key for Viewing Extended
  1267.                     Descriptions from RTM's main task screen.
  1268.  
  1269.  
  1270.  
  1271.           Resident-TaskManager Documentation                        Page: 19
  1272.  
  1273.  
  1274.                T)ransfer Task - Resident-TaskManager can transfer (copy) a
  1275.                     task to another task file. This is helpful if you want
  1276.                     to create a new task file for a different project or if
  1277.                     you want to assign a task to another person.
  1278.  
  1279.                D)OS Shell - Resident-TaskManager can invoke a DOS Shell if
  1280.                     it is running as a normal DOS Task. This option will
  1281.                     not appear as a menu choice if RTM is loaded as memory
  1282.                     resident. Once you have shelled to DOS you can return
  1283.                     to RTM by typing EXIT at the DOS command line. While at
  1284.                     the DOS Command line you can execute most DOS commands
  1285.                     or other programs. WARNING - Do NOT load any TSR's
  1286.                     while you are shelled to DOS.
  1287.  
  1288.              F. Edit Menu - "E"
  1289.  
  1290.              Pressing "E" activates the Edit Menu with the following
  1291.              options:
  1292.  
  1293.                A)dd New Task - Press the "A" key to add a new Task to your
  1294.                     list.  The Add/Modify window pops up and lets you fill
  1295.                     in a new item.  Use <Enter>, <Tab>, or the arrow keys
  1296.                     to move from field to field.  The date always defaults
  1297.                     to today's date. Use the arrow keys to change it or
  1298.                     pick a date off of the pop-up Calendar by pressing "C".
  1299.                     The priority field accepts any character and will force
  1300.                     all alphabetic characters to UPPER CASE. The default
  1301.                     value is blank (or no priority).  Up to fives lines can
  1302.                     be entered in the attached descriptions area (See
  1303.                     "Editing Keys" later in this document). Press <Esc>
  1304.                     while in the Attached Description Area to stop editing
  1305.                     or <F2> to stop editing and save. Or, press <F2> while
  1306.                     on any other field to save.
  1307.  
  1308.                     New items are always inserted at the current
  1309.                     highlighted position unless the auto-sort option is
  1310.                     enabled.
  1311.  
  1312.                     "A" - Short Cut Key for adding tasks from main task
  1313.                     screen.
  1314.  
  1315.                M)odify Current Task - Press the "M" key to modify the
  1316.                     current highlighted task.  This will bring up the
  1317.                     Add/Modify window and let you modify the Task (See
  1318.                     "Editing Keys" later in this document).  Use <Enter>,
  1319.                     <Tab>, or the arrow keys to move from field to field.
  1320.                     Press <Esc> while in the Attached Description Area to
  1321.                     stop editing or <F2> to stop editing and save. Or,
  1322.                     press <F2> while on any other field to save.
  1323.  
  1324.                     "M" - Short Cut Key for modifying tasks from main task
  1325.                     screen.
  1326.  
  1327.  
  1328.  
  1329.           Resident-TaskManager Documentation                        Page: 20
  1330.  
  1331.  
  1332.                E)dit Attached Description - You can edit the attached
  1333.                     description for the current highlighted task without
  1334.                     invoking the full Add/Modify screen by selecting this
  1335.                     option. The Attached description is a small memo area
  1336.                     for keeping additional information about the task. See
  1337.                     "Editing Keys" later in this document for a complete
  1338.                     list of valid editing commands.
  1339.  
  1340.                     <Alt-E> - Short Cut Key for editing the attached
  1341.                     description for the current highlighted task from main
  1342.                     task screen.
  1343.  
  1344.                T)ask Done - Mark it - Resident-TaskManager allows you to
  1345.                     flag a task as DONE by selecting this option. All data
  1346.                     for the task is retained as is except the Priority
  1347.                     field is changed to "-". You can remove the Done flag
  1348.                     by invoking the Modify Task and changing the Priority
  1349.                     to something other than "-".  This option is good for
  1350.                     keeping track of the work you have completed during the
  1351.                     week but don't want to delete or move to the Audit
  1352.                     file. ***NOTE: The date marked as completed on the
  1353.                     Audit file is still the day the task is written - not
  1354.                     the day it was marked "DONE".
  1355.  
  1356.                     <Alt-M> - Short Cut Key for marking task done from main
  1357.                     task screen.
  1358.  
  1359.                R)epeat Current Task - Repeats the current highlighted task
  1360.                     in it's entirety.  This is useful for creating a few
  1361.                     mostly similar Tasks.  Create one, repeat it, then
  1362.                     modify the items that differ.
  1363.  
  1364.                     "R" - Short Cut Key for repeating tasks from main task
  1365.                     screen.
  1366.  
  1367.                F)ind String in Task - Resident-TaskManager can search your
  1368.                     tasks for a specific character string. When you select
  1369.                     this option RTM will prompt you for the character
  1370.                     string you wish to search for at the bottom of the
  1371.                     screen. Enter the string, press enter, and RTM will
  1372.                     begin its search. If the string is found in the Task
  1373.                     Title, User Field, or Attached Description the task
  1374.                     will be moved to the top of the screen and the string
  1375.                     will be highlighted and blink. Note Date Due and
  1376.                     Priority are not searched. The search begins at the
  1377.                     current highlighted task and proceeds to the end of the
  1378.                     task list.
  1379.  
  1380.                     <Alt-F> - Short Cut Key for invoking the Find function
  1381.                     from main task screen.
  1382.  
  1383.                S)earch Again - Once an initial "Search" string has been
  1384.                     specified in the "Find" string function, Resident-
  1385.  
  1386.  
  1387.           Resident-TaskManager Documentation                        Page: 21
  1388.  
  1389.  
  1390.                     TaskManager can repeatedly search for additional tasks
  1391.                     containing the same string by selecting this option.
  1392.  
  1393.                     <Alt-A> - Short Cut Key for invoking the search Again
  1394.                     function from main task screen. The search begins at
  1395.                     the current highlighted task and proceeds to the end of
  1396.                     the task list.
  1397.  
  1398.              G. Delete Menu - "D"
  1399.  
  1400.              Pressing "D" activates the Delete Menu with the following
  1401.              options:
  1402.  
  1403.                E)rase Task - The Erase option simply erases the current
  1404.                     Task; no record of it will remain.
  1405.  
  1406.                     "K" - Short Cut Key for invoking the Erase task
  1407.                     function from main task screen. Pressing the "K" while
  1408.                     on the main screen will Kill / Delete the highlighted
  1409.                     task immediately. There is no warning - the task is
  1410.                     gone! (unless you use the (Q)uit with No Save to exit
  1411.                     RTM). The "D" menu option is the recommended option for
  1412.                     dealing with completed tasks.
  1413.  
  1414.                M)ove Task to Audit File and Erase - The Move option erases
  1415.                     the current Task; however, it first copies it to the
  1416.                     Audit File and gives it a time and date stamp for
  1417.                     completion.  The Audit File is an ASCII format file
  1418.                     that keeps copies of Tasks you've completed (and sent
  1419.                     to that file).
  1420.  
  1421.                C)opy Task to Audit NO Erase - The Copy option also moves
  1422.                     the Task to the Audit File.  However; it does not
  1423.                     delete it from your active list.  This is useful for
  1424.                     repetitive Tasks.  For instance, if you have certain
  1425.                     tasks you must do every month, such as monthly reports.
  1426.                     So you don't forget, you create Task entries to remind
  1427.                     you of them.  After you've completed the task, you can
  1428.                     document it by Copying the Task to the Audit File.  You
  1429.                     still have the original items in your active file.
  1430.                     Now, you can use the Date Manipulation keys to set the
  1431.                     next due-date.
  1432.  
  1433.              <Alt-D> - Automatically Delete a Task.
  1434.  
  1435.              Pressing <Alt-D> will automatically delete a task according to
  1436.              the delete option specified in the install program. This is
  1437.              similar to the "K"ill option listed above but you have the
  1438.              option of automatically Copying or Moving the task to the
  1439.              Audit file. You can pick the option you want to have as the
  1440.              <Alt-D> default in the installation program, RTMINST.
  1441.  
  1442.  
  1443.  
  1444.  
  1445.           Resident-TaskManager Documentation                        Page: 22
  1446.  
  1447.  
  1448.              H. Sort Menu - "S"
  1449.  
  1450.              Pressing "S" activates the Sort Menu.  You can sort your task
  1451.              list eleven different ways.  A prompt box is displayed with
  1452.              all of the possible sort options.  Use the highlight bar to
  1453.              pick the sort order you want, then hit the <Enter> key to
  1454.              execute the sort.
  1455.  
  1456.              <Alt-S> Sort the list Automatically.
  1457.  
  1458.              You can specify a default sort option in the install program
  1459.              and then automatically sort your file at any time by pressing
  1460.              the <Alt-S> key. If you pop up the sort menu and change the
  1461.              sort option that option will become your NEW sort default
  1462.              until you change it again or remove RTM from memory. If you
  1463.              specify Auto Sort on in the install program the <Alt-S> key
  1464.              must be used to maintain sorted order after date manipulation.
  1465.              The Auto Sort option only maintains the sort order after
  1466.              Add/Modify tasks or a new file is loaded.
  1467.  
  1468.              I. Print Menu - "P"
  1469.  
  1470.              Pressing "P" activates the Print Menu with the following
  1471.              options. The Resident-TaskManager print facility provides a
  1472.              fairly basic set of options. The changeable options are:
  1473.  
  1474.                N)otes are [Skipped/Printed] - The enter key will toggle
  1475.                     this field to determine if your attached descriptions
  1476.                     are printed along with your tasks or just the basic
  1477.                     task information is printed. This option can be set in
  1478.                     the installation program, RTMINST.
  1479.  
  1480.                N)ext 999 days - The enter key will bring up a sub-menu to
  1481.                     allow you to specify the number of days ahead you wish
  1482.                     to print. If you specify Print "0" Days in the install
  1483.                     program or on the Print Menu only the current day's
  1484.                     Tasks will be printed. All other Print "N" Days options
  1485.                     includes the Past Due tasks as well as tasks due within
  1486.                     the "N" days. This option can be set in the
  1487.                     installation program, RTMINST.
  1488.  
  1489.                N)ext 999 tasks - The enter key will bring up a sub-menu to
  1490.                     allow you to specify the number of tasks you want to
  1491.                     print. This option allows you to print the next "nnn"
  1492.                     tasks from the current highlighted task.
  1493.  
  1494.                Print "userfield" = ALL - The enter key will bring up a sub-
  1495.                     menu to specify the substring you wish to select for
  1496.                     printing. This option allows you to select a subset of
  1497.                     your task file based on your "userfield".
  1498.  
  1499.                Output [LPT1/FILE] - This field toggles between "LPT1" and
  1500.                     "FILE". When FILE is selected the Task report will be
  1501.                     written to a disk file named "taskfile.RPT". When LPT1
  1502.  
  1503.           Resident-TaskManager Documentation                        Page: 23
  1504.  
  1505.  
  1506.                     is selected the Task report will be written to the
  1507.                     printer. This option can be set in the installation
  1508.                     program, RTMINST.
  1509.  
  1510.                Go - Pressing the enter key will instruct Resident-
  1511.                     TaskManager to start printing.
  1512.  
  1513.              For each option, use the cursor keys (or press the first
  1514.              letter of the option) to move the highlight bar.  Then press
  1515.              Enter to select that option.
  1516.  
  1517.              <Alt-P> - Short Cut Key for invoking the Print function from
  1518.              main task screen.
  1519.  
  1520.              If you press the <Alt-P> key you will get a quick listing of
  1521.              your task file without going through the "Print" menu. <Alt-P>
  1522.              will use the default print options or the last options you
  1523.              specified on the Print menu.
  1524.  
  1525.              J. Quit Menu - "Q".
  1526.  
  1527.              Pressing "Q" activates the Quit Menu with the following
  1528.              options:
  1529.  
  1530.                S)ave File and Quit - This command saves the current data
  1531.                     file (if it's been modified) and exits Resident-
  1532.                     TaskManager.
  1533.  
  1534.                     "X" - Short Cut Key for Quitting RTM from main task
  1535.                     screen.
  1536.  
  1537.                Q)uit with NO Save - This command allows you to Quit
  1538.                     Resident-TaskManager without Saving the current
  1539.                     changes. Note - in TSR mode you should use the "Change
  1540.                     File" function from the File Menu or hit <F3> to reload
  1541.                     the current file to backout unwanted changes.
  1542.  
  1543.              <Esc> - Quit RTM. Pressing <ESC> from the main task screen
  1544.              will invoke the Quit Menu just as if you had pressed "Q".
  1545.              Pressing <ESC> from within a menu or function will cancel any
  1546.              action you have initiated.
  1547.  
  1548.           VII. COMMAND SUMMARY
  1549.  
  1550.                The following list of commands are available from the main
  1551.           task screen.
  1552.  
  1553.              A      -    Activate the Add Task Screen.
  1554.              C      -    Activate the Pop-Up Calendar for Date Selection.
  1555.              D      -    Activate the Delete Menu.
  1556.              E      -    Activate the Edit Menu.
  1557.              F      -    Activate the File Menu.
  1558.              K      -    Kill (Delete) Current Task Immediately.
  1559.              M      -    Activate the Modify Task Screen.
  1560.  
  1561.           Resident-TaskManager Documentation                        Page: 24
  1562.  
  1563.  
  1564.              P      -    Activate the Print Menu.
  1565.              Q      -    Activate the Quit Menu.
  1566.              R      -    Repeat Current Task.
  1567.              S      -    Activate the Sort Menu.
  1568.              V      -    View Current Audit File.
  1569.              X      -    Quit Resident-TaskManager.
  1570.              <Alt-A>     -    Invoke Find-Again Function.
  1571.              <Alt-D>     -    Invoke Automatic Task Delete.
  1572.              <Alt-E>     -    Invoke Attached Description Editing.
  1573.              <Alt-F>     -    Invoke Find Function.
  1574.              <Alt-H>     -    Display the Help Screen.
  1575.              <Alt-M>     -    Mark Task Done.
  1576.              <Alt-P>     -    Invoke Default Printing.
  1577.              <Alt-S>     -    Sort Tasks using Default Sort Order.
  1578.              <Alt-V>     -    View Extended Descriptions
  1579.              <F1>   -    Display the Help Screen.
  1580.              <F2>   -    Save Current Task File.
  1581.              <F3>   -    Prompt for new Task File.
  1582.              <F10>  -    Activate the Pull-Down Menu System.
  1583.  
  1584.           VIII. EDITING KEYS
  1585.  
  1586.           While adding or modifying tasks, Resident-TaskManager offers a
  1587.           fairly complete set of basic editing commands. The available
  1588.           commands and associated key(s) are listed below. These keys may
  1589.           vary depending if you are editing a single line or the attached
  1590.           description.
  1591.  
  1592.              <Left>, <CtrlS> - Cursor left one character.
  1593.  
  1594.              <Right>, <CtrlD> - Cursor right one character.
  1595.  
  1596.              <CtrlLeft>, <CtrlA> - Cursor left one word. If the cursor is
  1597.              at the beginning of a line, it is moved to the end of the
  1598.              previous line.
  1599.  
  1600.              <CtrlRight>, <CtrlF> - Cursor right one word. If the cursor is
  1601.              at the end of a line, it is moved to the beginning of the
  1602.              following line.
  1603.  
  1604.              <Home>, <CtrlQ><S> - Cursor to beginning of line.
  1605.  
  1606.              <End>, <CtrlQ><D> - Cursor to end of line.
  1607.  
  1608.              <Up>, <CtrlE> - Cursor up one line.
  1609.  
  1610.              <Down>, <CtrlX> - Cursor down one line.
  1611.  
  1612.              <CtrlHome>, <CtrlQ><E> - Move cursor to top of description
  1613.              window.
  1614.  
  1615.              <CtrlEnd>, <CtrlQ><X> - Move cursor to bottom of description
  1616.              window.
  1617.  
  1618.  
  1619.           Resident-TaskManager Documentation                        Page: 25
  1620.  
  1621.  
  1622.              <Del>, <CtrlG> - Delete character at cursor.
  1623.  
  1624.              <Bksp>, <CtrlH>, <CtrlBksp> - Delete character to left of
  1625.              cursor. If the cursor is at the beginning of a line, the line
  1626.              will be joined with the previous line.
  1627.  
  1628.              <CtrlY> - Delete current line.
  1629.  
  1630.              <CtrlQ><Y> - Delete from cursor to end of line.
  1631.  
  1632.              <CtrlT> - Delete word to right of cursor. If the cursor is at
  1633.              end of a line, the following line is joined with the current
  1634.              line.
  1635.  
  1636.              <Enter>, <CtrlM> - Start a new line.
  1637.  
  1638.              <Tab>, <CtrlI> - Move the cursor to the next tab stop. If
  1639.              insert mode is on, any text to the right of the cursor is
  1640.              moved to the right of the tab stop.
  1641.  
  1642.              <Ins>, <CtrlV> - Toggle insert mode on and off. A fat cursor
  1643.              indicates insert mode; a thin cursor indicates overtype mode.
  1644.  
  1645.              <CtrlB> - Reformat attached description.
  1646.  
  1647.              <CtrlQ><L> - Restore original contents of the current line.
  1648.  
  1649.              <Esc>, <CtrlBreak> - Quit editing.
  1650.  
  1651.           IX. TECHNICAL NOTES
  1652.  
  1653.                For those that care about these things, here is some of the
  1654.           technical information about this program:
  1655.  
  1656.              The program is written in Turbo Pascal version 6.0.  It relies
  1657.              extensively on the Turbo Professional toolbox from TurboPower
  1658.              Software for screen handling, error handling, pick lists, and
  1659.              many other aspects of the program.
  1660.  
  1661.              It uses the Swapping TSR routines from TurboPower Software's
  1662.              Object Professional.
  1663.  
  1664.           X. ASSOCIATION OF SHAREWARE PROFESSIONALS
  1665.  
  1666.                The owner of WetZoft Applications is a member of the
  1667.           Association of Shareware Professionals (ASP), an organization
  1668.           formed in April 1987 to strengthen the future of shareware (user-
  1669.           supported software) as an alternative to commercial software.
  1670.           Its members, all of whom are programmers who subscribe to a code
  1671.           of ethics, are committed to the concept of shareware as a method
  1672.           of marketing.
  1673.  
  1674.                ASP wants to make sure the shareware principle works for
  1675.           you.  If you are unable to resolve a shareware-related problem
  1676.  
  1677.           Resident-TaskManager Documentation                        Page: 26
  1678.  
  1679.  
  1680.           with an ASP member by contacting the member directly, ASP may be
  1681.           able to help.  The ASP Ombudsman can help you resolve a dispute
  1682.           or problem with an ASP member, but does not provide technical
  1683.           support for members' products.  Please write to the ASP Ombudsman
  1684.           at P.O. Box 5786, Bellevue, WA 98006 or send a Compuserve message
  1685.           via easyplex to ASP Ombudsman 70007,3536
  1686.  
  1687.              A. The primary goals of the ASP
  1688.  
  1689.                 To inform users about shareware programs and about
  1690.                 shareware as a method of distributing and marketing
  1691.                 software;
  1692.  
  1693.                 To encourage broader distribution of shareware through user
  1694.                 groups and disk dealers who agree to identify and explain
  1695.                 the nature of shareware;
  1696.  
  1697.                 To assist members in marketing their software;
  1698.  
  1699.                 To provide a forum through which ASP members may
  1700.                 communicate, share ideas, and learn from each other; and
  1701.  
  1702.                 To foster a high degree of professionalism among shareware
  1703.                 authors by setting programming, marketing, and support
  1704.                 standards for ASP members to follow.
  1705.  
  1706.           XI. OTHER PROGRAMS BY WETZOFT APPLICATIONS
  1707.  
  1708.              A. CALRPT
  1709.  
  1710.                CALRPT is a program that produces a nicely formatted
  1711.           calendar report (Screen, Printer, or File) from Sidekick+'s
  1712.           Calendar file without invoking Sidekick+. This is especially
  1713.           helpful in your AUTOEXEC file to show you what is on your
  1714.           Calendar for the next few days. To invoke CALRPT just type CALRPT
  1715.           from the DOS command line or place the command CALRPT somewhere
  1716.           in your AUTOEXEC.BAT file.
  1717.  
  1718.              B. CALTRV
  1719.  
  1720.                CALTRV, like CALRPT, is a program that produces a nicely
  1721.           formatted calendar report from Sidekick+'s Calendar file without
  1722.           invoking Sidekick+. The primary difference between CALTRV and
  1723.           CALRPT is that CALTRV is more paper oriented. That is, it
  1724.           produces a more standard type of Daily, Weekly, and Monthly
  1725.           Calendar report. CALTRV was designed to be a replacement for
  1726.           Traveling Sidekick, by Borland International.
  1727.  
  1728.           XII. REVISION HISTORY
  1729.  
  1730.           2.10 01/01/91
  1731.  
  1732.           . Added Searching of the main Task File. This search is identical
  1733.                to the Audit File search released in Version 2.0. You can
  1734.  
  1735.           Resident-TaskManager Documentation                        Page: 27
  1736.  
  1737.  
  1738.                now invoke a search of the RTM .DAT from the "Edit" menu or
  1739.                with the <Alt-F> key and you can repeat the search with the
  1740.                <Alt-A> key. You can also Search Again from the "Edit" menu.
  1741.           . Added Single File Swapping. By specifying /D1 on the command
  1742.                line or selecting the "Swap Disk 1" option in RTMINST you
  1743.                can invoke single file disk swapping. RTM normally uses a
  1744.                dual file swapping method - one to page the program code out
  1745.                too and one to read the RTM code in from.  With Single file
  1746.                swapping RTM can use one file for both. The penalty of this
  1747.                option is an additional 3K in the resident portion of the
  1748.                code and a little slower swapping. However, this option is
  1749.                very useful for RAM disks where you can conserve space and
  1750.                the speed penalty is rather small.
  1751.           . Added a "Shell to DOS" Function. Available in NON-Resident Mode
  1752.                only from "File" menu.
  1753.           . Added Extended Attached Descriptions. If you put a file name as
  1754.                the only entry on line one of the attached description you
  1755.                can view that file using the <Alt-V> command. This function
  1756.                allows you to keep more detailed notes in a separate ASCII
  1757.                file but still view it through RTM. NO editing facilities
  1758.                exist for the external file. You can put additional
  1759.                information on lines 2 - 5.
  1760.           . Added Done Flag for Tasks. You can now flag a task as DONE by
  1761.                hitting the <Alt-M> key for "Mark Task Done". This is also
  1762.                available from the "Edit" menu. All data for the task is
  1763.                retained as is except the Priority field is changed to "-".
  1764.                You can remove the Done flag by invoking the Modify Task and
  1765.                changing the Priority to something other than "-".  This
  1766.                option is good for keeping track of the work you have
  1767.                completed during the week but don't want to delete or move
  1768.                to the Audit file. ***NOTE: The date marked as completed on
  1769.                the Audit file is still the day the task is written - not
  1770.                the day it was marked "DONE".
  1771.           . Added ability to Print Today's Tasks Only. If you specify Print
  1772.                "0" Days in the install program or on the Print Menu only
  1773.                the current day's Task's will be printed. All other print
  1774.                "N" days options will also include the Past Due tasks as
  1775.                well as tasks within the "N" days.
  1776.           . Added Print RTM Report from Command Line. You can now invoke
  1777.                RTM reports from the command line with RTM /P.  RTM will not
  1778.                be loaded. Tasks are automatically sorted, using the default
  1779.                sort options, when Requesting Print Only from Command Line
  1780.                via the NEW /P parameter
  1781.           . Added Default Directory to Change/Transfer Task. When you
  1782.                change task files or transfer tasks RTM will now default its
  1783.                initial prompt string to the path and file where the current
  1784.                .Dat file resides.
  1785.           . Added Day completed to Audit Report. Line on Audit File now
  1786.                contains: COMPLETED:  ddd mm/dd/yy hh:mm:ss xm.
  1787.           . Added Short Cut Keys to Menus for Reference. The short cut
  1788.                equivalents of all the menu options are now displayed on the
  1789.                pop-up menus. These keys are not active while the menu is
  1790.                displayed but are there to serve as reference if you want to
  1791.                bypass the menu system.
  1792.  
  1793.           Resident-TaskManager Documentation                        Page: 28
  1794.  
  1795.  
  1796.           . Added <F2> Command to Save File on from Task Screen.
  1797.           . Added <F3> Command to Load New Task File from Task Screen.
  1798.           . Added improved Error Checking in Install Program. RTMINST now
  1799.                checks for Read, Write, and Version Mismatch Errors.
  1800.           . Added ability to save some printing defaults. Can Set Notes
  1801.                Printed/Skipped; Print To Disk/LPT1; Next nnn Days in
  1802.                RTMINST.
  1803.           . Added User Field Description in install program. If User
  1804.                changes the "User Defined" field the sort field will be
  1805.                changed to reflect the new title.
  1806.           . Added Default for Date Due / Assigned in Install Program. You
  1807.                can set the Default Date display in the Install Program or
  1808.                Toggle with the space Bar within RTM.
  1809.           . Changed Error Messages from Pick List Screen to be more
  1810.                Informative.
  1811.           . Changed Error Messages when ESCing from Add/Modify Screen to be
  1812.                more Informative.
  1813.           . Changed Audit Report by removing File Name. It was only valid
  1814.                when file was created and was not updated if file moved or
  1815.                changed name.
  1816.           . Changed Printed Reports by moving File Name to End of Report
  1817.                when printing Tasks out.
  1818.           . Changed RTM Install to allow for additional Drives. RTM Install
  1819.                now allows more drives to be valid for Swap Path Changed the
  1820.                function in the Install Program to allow any valid drive
  1821.                past "C" to be used for swap files. Function used to stop at
  1822.                "G".
  1823.           . Fixed Notes from being Displayed in Empty DAT File. When the
  1824.                last entry in the RTM file was cleared, the notes for that
  1825.                entry were still displayed.
  1826.           . Fixed message at bottom of screen when all tasks are deleted to
  1827.                read 0 of 0 as it should.
  1828.           . Fixed Problem with Back-Tab from User Field to Priority Field.
  1829.                If User Field was blank and you Back-Tabed to the Priority
  1830.                field the Priority field would get blanked.
  1831.  
  1832.           2.06 09/30/90
  1833.  
  1834.           . Fixed Bug in View Audit File function that would overwrite
  1835.                memory and sometime kill the program that was pop-ed over.
  1836.  
  1837.           2.05 09/20/90
  1838.  
  1839.           . Added toggle between Date Due/Assigned on main screen - using
  1840.                space bar.
  1841.           . Fixed Bug with long lines in attached description that caused
  1842.                code to be clobbered
  1843.           . ASP Information included in documentation
  1844.           . Removed Two Tier Pricing. Registration automatically includes
  1845.                disk & printed documentation
  1846.           . Cleaned up various other area in the documentation.
  1847.  
  1848.           2.04 09/06/90
  1849.  
  1850.  
  1851.           Resident-TaskManager Documentation                        Page: 29
  1852.  
  1853.  
  1854.           . Removed timed delay on Shareware Screen. Now Press Any Key will
  1855.                continue immediately.
  1856.  
  1857.           2.03 08/25/90
  1858.  
  1859.           . Fixed problem with heading (File Name) not being properly
  1860.                updated when Menu Bar showing.
  1861.           . Fixed problem with Added/Modified Task containing Nulls in User
  1862.                Field.
  1863.           . Fixed File Safety Feature to save Modified/Added task at the
  1864.                proper time. It was saving prior to last change.
  1865.  
  1866.           2.02 08/21/90
  1867.  
  1868.           . Fixed Problem where Pop-Up Menu bar would not clear
  1869.  
  1870.           2.01 07/31/90
  1871.  
  1872.           . Fixed problem with pick list on Change File
  1873.  
  1874.           2.00 07/21/90
  1875.  
  1876.           . Modified Help Screen for new options and clarity
  1877.           . Cleaned up documentation for consistency and clarity
  1878.           . Fixed Problem with UserField/Task Descriptions Redraw
  1879.           . Added Query to Create File when Changing/Transferring to a New
  1880.                File
  1881.           . Add time Completed to Audit report
  1882.           . Add Audit File Browse with String Search
  1883.           . Add 3 Level Sorting [Date, Priority, Project AND Project, Date,
  1884.                Priority]
  1885.           . Add Print to File [taskfile.RPT]
  1886.           . Change <F10> in Add/Modify to <F2> for File Save for Menu
  1887.                Consistency
  1888.           . Add Transfer Task to Another File
  1889.           . Add Wordwrap/Free Form Edit for Attached Description
  1890.           . Add <Alt-E> for Quick Edit of Attached Description from Main
  1891.                Screen
  1892.           . Add Message to Tasks Reports to indicate 0 or Number of records
  1893.                printed
  1894.           . Add Auto Save Option after Add/Modify [Installable]
  1895.           . Fix Loose Changes to Lose Changes - Spelling
  1896.           . Error Add Pick list to Change of File
  1897.           . Change All Data Entry Fields to Clear 1st Char
  1898.           . Add Print from Cursor for N Tasks
  1899.           . Remove Quit w/Cancel Option to Avoid Confusion - Use Change
  1900.                File
  1901.           . Add European Dates Support [Installable]
  1902.  
  1903.           1.02 December 1989
  1904.  
  1905.           . Added <Alt>-D,P,S for automatic deleting (Erase, Move, Copy), .
  1906.                Printing, Sorting.
  1907.           . Added Auto Sort option for keeping tasks sorted automatically.
  1908.  
  1909.           Resident-TaskManager Documentation                        Page: 30
  1910.  
  1911.  
  1912.           . Cleaned up Install program and added pop-up field help.
  1913.           . Removed Hidden/System Attribute from SWAP files.
  1914.           . Changed Insert cursor size on add/modify screen to be more
  1915.                visible.
  1916.           . Added ability to access Help Screen <F1> from within Add/Modify
  1917.                screen.
  1918.           . Add Verification Check when <Esc>ing out of Add/Modify screen.
  1919.           . Add "Reminder" for past due tasks in Main Pop-Up.
  1920.  
  1921.           1.01
  1922.  
  1923.           . Added "K" for Quick Kill Task. WARNING!!! This will delete the
  1924.                current Task immediately!!! With NO warning. The "D" Menu is
  1925.                still recommended.
  1926.           . Added "C" for Pop-Up Calendar date entry
  1927.           . Added additional defaults to the Install program to allow user
  1928.                to select Default "Delete" action, Default User Field VALUE,
  1929.                Default Priority Value
  1930.           . Added/Clarified Quit options for Save/NoSave and Reread Input
  1931.                File
  1932.           . Fixed Install Program - Return on Hot Key went to Top of Screen
  1933.                instead of next field.
  1934.           . Fixed Problem with RTM/RBase conflict (INT 33)
  1935.           . Fixed Problem when writing out Audit file with blank
  1936.                Description Lines
  1937.  
  1938.           1.00 Initial Shareware Release - September 1989
  1939.  
  1940.  
  1941.  
  1942.  
  1943.  
  1944.  
  1945.  
  1946.  
  1947.  
  1948.  
  1949.  
  1950.  
  1951.  
  1952.  
  1953.  
  1954.  
  1955.  
  1956.  
  1957.  
  1958.  
  1959.  
  1960.  
  1961.  
  1962.  
  1963.  
  1964.  
  1965.  
  1966.  
  1967.           Resident-TaskManager Documentation                        Page: 31
  1968.  
  1969.