home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Overload
/
ShartewareOverload.cdr
/
database
/
maint1.zip
/
MANUAL.DOC
< prev
Wrap
Text File
|
1991-02-17
|
19KB
|
545 lines
STARBURST SOFTWARE
William L. Elderkin
32045 N. ROUNDHEAD DR.
SOLON, OH 44139
STARBURST MAINTENANCE PROGRAM
REVISION 3.08C
RELEASED Jan. 17, 1991
COPYRIGHT (C) 1989
WILLIAM L. ELDERKIN
STARBURST MAINTENANCE PROGRAM Page 1
REVISION 3.08C
RELEASED Jan. 17, 1991
**Introduction:
Starburst Maintenance Program is being distributed under the Shareware
distribution system.
Starburst Maintenance Program is a growing program or project. You may
find sections that do not run, or reports that are not in place. This
is not a hold out, I have been working on this project for three years
and this is where I am at the time of this release.
Copies of this program may be made and shared, as long as no fee is
charged, other than a nominal fee for material. You have the opportunity
to try the program for free or at a minimum cost,if the program does not
meet your needs you are out only the time to try it out. However if it
saves you thousands of dollars of maintenance down time, then it would
be practical for you or your company to support this type of software.
The only way the SHAREWARE concept will work is if users support the
author and the programs.
By registering this program with the author you will support its
continuing growth. And you will receive the latest revision, and
major updates for the next two years, with a minumum of at least
two (2) major updates. Also user support by mail and in emergency
by phone ( in the evening or weekends only ).
The registration fee is $49.00; add $3.00 sales tax if in Ohio and
$5.00 postage for overseas and/or air mail.
This Maintenance Program is in three main sections. These sections are
Preventive Maintenance, Corrective Maintenance and Utilities.
PREVENTIVE MAINTENANCE is an easy to use tool that quickly reduces
maintenance cost for any size company. By using the weekly
generated reports maintenance items will not be over looked or
skipped. Maintenance items that are done once a week or once
every three years will be done with no thought from management.
For example; how long has it been since the EXIT door lights have
been checked for operation. How often has an oil sump run dry, a
cable failed due to poor lubrication, an OSHA required report
been neglected, production shut-down for the same failure that
could be prevented with a time changed item. Every time you have
a break-down; think "Would I have this problem if someone had
looked at it, oiled it, filled it, tested it, changed it or tuned
it last week". If the answer is, "NO, I would not have the
problem", then enter the item into the PREVENTIVE MAINTENANCE
work order file and the chances are slim that the problem will
ever reoccur.
STARBURST MAINTENANCE PROGRAM Page 2
REVISION 3.08C
RELEASED Jan. 17, 1991
CORRECTIVE MAINTENANCE is used to track time and cost of corrective
maintenance. How often have you wished you knew how many times
the machine had the same failure. Or what has been the total cost
keep an old junker running. Also how long did it take to fix it,
and what material was used. What is an accurate estimate to repair
it this time ?
UTILITIES are use by both sections so that data does not need to be
entered more than once. Other services provided in Utilities are
Back Up Data, Re_Index Files, Install, Erase all Files, Color and
Set Date Format
**SYSTEM REQUIREMENTS
-An IBM PC or compatible
-A monochrome or color monitor with 80 column display.
A color graphics board is not necessary, but if you have one,
the set up program will ask you to indicate it.
-A 370 K disk drive or hard disk.
-An 8 1/2 x 11 printer.
**FILES
MAINT.EXE Program
A_INITAL.DBF Dbase file, Stores the set up data
A_EQUIP .DBF Dbase File, Stores the machine data
I_EQUIP .NTX Index
A_DMDWO .DBF Dbase file, Stores corrective work orders
I_DMDWO .NTX Index
A_DMD_FX.DBF Dbase file, Stores corr. action or fixes
A_DMD_MT.DBF Dbase file, Stores corr. material & cost
A_DMD_LB.DBF Dbase file, Stores corr. labor hrs. & cost
A_DMD_WO.DBF Dbase file, Stores corr. descriptions
A_LABOR .DBF Dbase file, Stores labor rate data
I_LABOR .NTX Index
A_PM_WOS.DBF Dbase file, Stores PM work orders
I_PM_WOS.NTX Index
A_PM_DES.DBF Dbase file, Stores PM descriptions
I_PM_DES.NTX Index
A_PMSTAT.DBF Dbase file, Stores PM history
MANUAL .DOC Text file, Program manual
CONFIG .SYS Sys file, Sample of file required on BOOT
STARBURST MAINTENANCE PROGRAM Page 3
REVISION 3.08C
RELEASED Jan. 17, 1991
**GETTING SETUP
1. The first thing you will want to do is make a backup copy. Do not
use this master as a working disk. Also make a copy to give to a
friend.
2. Your boot disk or drive must have a program called CONFIG.SYS
A. If you do not have a program called CONFIG.SYS on your boot disk
or hard drive copy the one from the Maintenance disk onto the boot
disk or hard drive.
B. If you do have CONFIG.SYS, check to see that it calls for at
least 14 files and 20 buffers. To check:
a. Turn on or re-boot the computer
b. At the prompt enter { X:> TYPE CONFIG.SYS }.
You should see on any two lines:
FILES=14
BUFFERS=20
c. If not, the file can be modified with a Word Processor
in "non-document" mode or with your DOS EDLIN. This
will only help your computer run better and will not
effect other programs.
3. Hard disk installation.
A. Copy the disk into a sub-directory on your hard disk.
COPY *.* C:\{sub}
B. From that sub-directory enter or run MAINT.
C. The screen will clear, Then say loading MAINT.EXE. The logo
will appear and then the date menu. Enter the correct date.
At this point a light bar menu will appear. On all light bar
menus you may use the arrow keys and enter or the first letter
or number or letter of the selected line. Select "UTILITY".
D. From the next or Utility Menu select - "3. Install".
E. Fill in the blanks on the form. The most important question
is the one on DATA storage. You must indicate the drive letter,
A, B, C, D, OR E where the files are stored. Note: A_INITAL.DBF
must be on the same drive and sub-directory as MAINT.EXE. All
the other files may be saved on the hard drive or a floppy.
F. Next, from the Utility Menu select - 4. Erase all the files.
This removes old data and resets the file pointers and indexes.
G. If you are not in the U.S.A. select -5. Set DATE format. This
allows for dd/mm/yy or mm/dd/yy etc.
H. Enter 9 to return to the Main Menu
STARBURST MAINTENANCE PROGRAM Page 4
REVISION 3.08C
RELEASED Jan. 17, 1991
4. Floppy disk installation.
A. For best results the program and files should be on separate
floppy disks. Only one disk drive is required.
a. Disk #1 COPY
COPY MAINT.EXE B:
COPY A_INITAL.DBF B:
b. Disk # 2 COPY
COPY *.DBF B:
B. From DRIVE A: ENTER or run MAINT.
C. The screen will clear, Then say loading MAINT.EXE. The logo
will appear and then the date menu. Enter the correct date.
At this point a light bar menu will appear. On all light bar
menus you may use the arrow keys and enter or the first letter
or number on the selected line. Select "UTILITY".
D. From the next or Utility Menu select "INSTALL".
E. Fill in the blanks on the form. The most important question
is the one on DATA storage. You must indicate the drive letter,
A, B, C, D, OR E where the files are stored.
Put Disk #2 in drive A: if you have only one disk drive.
F. Next, from the Utility Menu select - "4. Erase all the files".
This removes old data and resets the file pointers and indexes.
G. If you are not in the U.S.A. select -"5. Set DATE format". This
allows for dd/mm/yy or mm/dd/yy etc.
H. Enter 9 to return to the Main Menu
**Getting started
1. Now from the Main Menu run Machine Data. This is not the fun part of
program. For now enter machine number, name, location, department.
(Reports using other data have not been written). This data will be
used on all work orders and does not have to be re-entered.
2. From the Main Menu run Category, the default categories are shown.
You may change them to anything you like. Some change them to dept's.
or buildings etc.
3. Now run Labor, and enter up to 10 (0-9) labor grades. (Not used yet).
4. The DATE format was set in the Install program. This may be changed
at any time. When you change it all stored dates will change too.
STARBURST MAINTENANCE PROGRAM Page 5
REVISION 3.08C
RELEASED Jan. 17, 1991
**Preventive Maintenance;
1. Now it is time to load the Preventive Maintenance Work Orders.
There is room for 9999 preventive maintenance work orders.
2. Run -Preventive Maint- from the Main Menu. Then select
-1. Enter PM w.o.'s
3. The first request is for the machine number. You need only to enter
the first few character. It will load the first machine that starts
with those characters. You can browse the machine file to get the
correct machine if needed. Remember, on the light bar menu just hit
B for {back one} or N for {next one} or the UP/DOWN arrows.
4. Enter the maintenance frequency in DAYS:
A. 1826 days = 5 Years
B. 1461 = 4 "
C. 1096 = 3 "
D. 730 = 2 "
E. 365 = 1 "
F. 182 = 6 Months
G. 91 = 3 "
H. 30 = 1 "
I. 7 = 1 Week
5. Enter start date, This should be in the future but it can be in the
past. The W.O.'s is run on the date entered and then after the
frequency period from the entered date.
6. Enter priority, This is for shop schedules and is optional.
7. Enter the description, you have 10 lines of 60 characters. Be as
descriptive as possible. Say what you want done, with what, etc.
Getting ideas for the first group of work orders may be the
hardest. After some use, ideas will come quickly. Here are some
suggestion.
A. Change filters.
B. #3 lub. gun. 6 fittings coded yellow
C. Hyd filter check flow or by pass indicator.
D. Clean main air screen.
E. {Truck} Check oil, water, tire pressure.
F. {Fork Truck} Blow out radiator core.
G. Complete OSHA 90 day inspection report & file
H. Check gear box oil level, fill as needed.
I. Inspect safety cable. Replace as needed.
J. Check main transformer for oil leaks.
K. Spray weeds in storage area.
L. Filters; Any kind any where,they are never changed
M. Exit lights. {When were They checked last ?}
N. Guards in place. { OSHA checked last time I bet.}
O. What broke down last week ?
STARBURST MAINTENANCE PROGRAM Page 6
REVISION 3.08C
RELEASED Jan. 17, 1991
8. It is suggested that you run DUE work orders once each week, but that
is up to you. Running Due work orders will print out Work Orders
for any tasks that are due. If it is due once a year it will print
once a year, and only once a year.
9. As work orders are completed Post the File Number, not Index Number
to close. You may print out all work orders that have not been closed
if you need duplicates.
10.After selecting Edit you will be ask for the file index number.
This the sequential number assigned by the program, which you can
find on the top line of any of the printed reports.
The update screen is the same as above. Entering a blank will
return you to the Main Menu.
11.Selecting List All PM WO's will result in a report of all work orders
in the file. You may select the printing sequence:
1. FILE INDEX
2. MACHINE NUMBER
3. CATEGORY
12.List All Due WO's - This is the print out that you are looking for.
This printing list each work order that is due or overdue, leaving
room for remarks and a place to sign off the work. As the list is
printed all files are updated to the calendar. It is suggested that
this LISTING be run once a week otherwise the work load in one
category may be to great.
Corrective Maintenance:
1. This program tracts corrective maintenance cost for each machine.
The files will hold as many records as you have disk space.
2. From the Corrective Menu, enter Corrective W.O.
3. Enter the machine number as before.
4. Enter a description of the work that is to be done.
5. Using the Report Menu print the work order.
6. Follow up by entering labor hours worked, parts and material, and
a description of the corrective action.
STARBURST MAINTENANCE PROGRAM Page 7
REVISION 3.08C
RELEASED Jan. 17, 1991
**More to come:
As you can see there is a lot of room for more. Reports will be added
programs will be expanded and corrected. Please send suggestion and
errors found in the program to Starburst Software.
A note to current registered users of PM MAINT:
Thanks for your support and help. This program is more than an up-date,
it is entirely new. It is written in a different language, the old was
Basic, the new is DBase III. It is much faster ( it will sort several
hundred files in a minute or two while the old took 10 or more minutes.
Also the old held only 400 files, the new holds 9999 and if someone
needs more it can be increased to 99999. And it has a new look with
light bar menus, framing, date format, color and more.
Now the bad news, the files are DBase not Basic and the data will not
transfer. If you don't feel the good is stronger, stay with the old.
For any one who does not have Revision 1.40, it is on the disk.
STARBURST MAINTENANCE PROGRAM Page 8
REVISION 3.08C
RELEASED Jan. l, 1991
**New users;
After trying this program and determining its value, you are
requested to pay a registration fee of $49.00, plus $3.50 tax if
in Ohio and $5.00 shipping if overseas. On registration you will
receive the latest revision and the next two major up_dates,or
major updates for two years.
Send check, US money order, or P.O. number to:
Starburst Software
32045 N.Roundhead Dr.
Solon, Ohio 44139
Registration form:
__________________________________________________________________________
Jan. 17, 1991
Revision 3.08C
Disk Reg. Number __1011______
Date program requested ___/___/___
Name of contact/user ___________________________________________
Name of Company ___________________________________________
Name of Division ___________________________________________
Street Address ___________________________________________
P. O. Box ______________
City ____________________________________________
Country ____________________________________________
Phone ____________________________________________
Fax ____________________________________________
Disk Size _________ 5 1/4 __________ 3 1/2
Please enclose check, money order or company purchase order in US $'s.
STARBURST MAINTENANCE PROGRAM Page 9
REVISION 3.08C
RELEASED Jan. 17, 1991
**Warranty
This program is sold "AS IS" and with out warranty as to performance.
Due to the diversity of conditions and hardware under which the
program may be used, no warranty of fitness for a particular
application is offered.
There is no warranty that this program is defect free or will work
on the users application. The author assumes no responsibility for
damage resulting from the use of this program. It is the users
responsibility to test the program for the application.
If one has paid the registration fee, disks damaged in the mail
will be replaced at no charge. To receive the replacement send
a letter to the above address. There is no need to return the disk.
Starburst Software Page 10
32045 N.Roundhead Dr.
Solon,OH 44139
(216) 498-1744
3 1/2 and 5 1/4 DISKETTES ORDER FORM
Price
Each Quant. Total
5 1/4 DS/DD Diskettes W/sleeves $.50 X ______ = ______
5 1/4 DS/HD Diskettes W/sleeves $.72 X ______ = ______
3 1/2 DS/DD Diskettes $.89 X ______ = ______
3 1/2 DS/HD Diskettes $1.90 X ______ = ______
Sub Total ............................. = ______
7% Sales Tax in Ohio .................. = ______
Shipping .............................. = $3.00
Out side U.S.A. + $2.00 ............... = ______
TOTAL ............... = ______
All DISKETTES are warranted 100%. Return any defective diskette
for replacement.
Price≤ arσ subjec⌠ t∩ changσ witΦ ou⌠ notice.
Please, no phone orders. We will except checks, money orders or
purchase orders. Payment to be in US dollars only.
Name __________________________________________
Company __________________________________________
Street __________________________________________
P.O. Box ___________________
City ______________________________
State - ZIP _____________ _______________
Country ______________________________
1011
Page 12
NOTE: TO LIST THIS MANUAL :
1. Set printer to the top of the page.
2. Enter at the prompt x:> COPY MANUAL.DOC PRN