home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Overload
/
ShartewareOverload.cdr
/
comm
/
emma22.zip
/
TYMNET.CSF
< prev
next >
Wrap
Text File
|
1990-03-06
|
2KB
|
57 lines
* Use this script with EMMA if you connect to MCI Mail via TYMNET.
*
* To prepare this script, copy it to a file called EMMA.CSF and then edit
* it as follows:
*
* (1) Change the port parameters on the line marked *1*. The first number
* indicates the COM port that EMMA is to use; it may be 1, 2, 3
* or 4. The second number indicates the line speed in bits per
* second; it must be given in double-quotes. Examples are "1200" and
* "2400".
*
* (2) Adjust the dialing string on the line marked *2*. First, change
* the telephone number to that appropriate for your location. Be
* careful not to delete the ^M at the end of the string. You might
* also need to change "ATDT" to "ATDP" to accomodate pulse dialing,
* or put a "9," before the number if you are dialing through a PBX.
*
* (3) Replace "username" in the line marked *3* with your MCI Mail
* username in double quotes.
*
* (4) Replace "password" in the line marked *4* with your MCI Mail
* password in double quotes.
*
* (5) Remove these comments. That is, delete all lines from the top
* of the file down to and including the line of asterisks.
*******************************************************************************
C "Connecting to MCI Mail via TYMNET^M^J"
C "(Press the Escape key if you need to abort the session.)^M^J"
P 1 "2400" *1* Your COM port number and speed go in this line
T "ATZ^M"
R 5 "OK^M^J"
D 1
T "ATE1 S7=45^M" Echo commands. Wait 45 secs for carrier.
R 5 "OK^M^J"
T "ATDTXXX-XXXX^M" *2* Your local TYMNET number goes in this line
R 40 "CONNECT"
B
D 8
T "A"
R 15 ":"
T "^H^RMCILINK^M"
R 10 "name:"
T "username" *3* Your username goes on this line
T "/batch:1ST/"
T "password" *4* Your password goes on this line
T "^M"
R 20 "COM^M^J"
M
D 1
T "+++"
R 10 "OK"
D 1
T "ATH0^M"
R 10 "^M^J"
T "ATZ^M"
C "You will find any new mail in file MAIL.IN"